This research aims to identifi and analyze the quality control of wardrobe products at Meubel Pesona Jepara in Penfui, Kupang City. This research is a case study which focuses on quality control carried out by the company to minimize defects in cabinet products in Pesona Jepara Furniture in Penfui, Kupang City. The date Collection techniques used in this research are observation, interviews, documentation and questionnaieres, while the analysis techinque used in this research is the Pareto diagram as atool to find the most dominant product at Pesona Jepara Furniture in Penfui, Kupang City. The results of this research show that quality control of cupboards in 2023 with 3 types of product defects, namely 9 cupboards not conforming to order specifications (39%), 8 Cupboards had rotten wood (35%), and 6 cupboards had broken wood (26%). From the analysis of the cause and effect diagram, it can be seen that the factors causing damage or damage in production orginate from human/ employee factors, work methods and materials/ raw materials.

Briquettes are a type of alternative energy whose raw material source Plastic waste is an environmental problem faced by the people of Indonesia and the world. On the other hand, the production of waste generated in various institutions and sectors in Indonesia continues to increase every year, including the industrial sector whose production process is large-scale. Its use as a basic material for packaging bottles reaches 30% of world use. PET is also used as a synthetic fiber or polyester which accounts for 60% of world use. Study the author will do that is to make a tubing made from PET plastic waste that can be used as raw material for tubing. Using temperature variations (190?, 200?, 210?), then 9 samples from each variation will be micro-photographed the effect of temperature on tubing results and tested for maximum tensile. After that, calculations are carried out to obtain the maximum tensile stress and strain values. Then the average maximum load value that can be received by PET tubing is highest at 190ºC temperature tubing has the ability to withstand tensile strength better than all temperature variations so that the average value is 35.94 N/mm2 and 200ºC is able to withstand 35.49 N/mm2 and 210ºC with 18.30 N/mm2. It can be interpreted that the higher the temperature, the effect on holding the tensile strength of the PET tubing and making the plastic structure change so that 210oC is close to the recycling value, while for temperatures below it is still non-recycled.

The current fuel is still sourced from fossil fuels, namely oil, coal and The current fuel is still sourced from fossil fuels, namely oil, coal and gas, which have many impacts on the environment. As an agricultural country located in the tropics, Indonesia is rich in biomass energy sources. In this research, the use of candlenut shells will be used or processed into alternative fuel, namely briquettes, with the aim of determining the value of combustion time and temperature produced through variations in composition and mesh size. The results of the research show that the effect of the burning temperature has an impact on the burning time of the briquettes and the resulting temperature, where the best burning time and temperature values ??of the briquettes are produced by a burning temperature of 400°C with a grain size of 100 mesh, namely 177 minutes with an average burning temperature briquettes 193.9°C.

Along with the times, the availability of fossil energy is decreasing, especially natural gas and coal, before using fossil energy, humans have used biomass as an energy source. Indonesia has many plantation commodities, one of which is coffee which is the fourth largest coffee producer in the world. Coffee grounds are the main waste produced by coffee shops and are usually only thrown away. The main ingredients in this study were arabica coffee grounds and robusta. By using robusta composition 60% arabica 40%, robusta 50% arabica 50% robusta 40% arabica 60%. In addition, briquettes are tested for hardness by making points on the surface of the briquettes using a durometer shore A tool of 30 points, then a calorimeter bomb test is carried out to obtain the calorific value content. The result obtained from the highest hardness value is briquettes with a robusta mixture of 50% arabica 50% with a value of 23.7 HA, while the highest calorific value is found in a robusta mixture of 60% arabica 40% with a value of 4526.85 cal / gram.

Candlenut shell is an organic waste that has a hard texture and has a high carbon element. The amount of candlenut shell produced from each processing of candlenut seeds is very large but has not been optimally utilized. For this reason, an effort is needed to utilize candlenut shells so that they do not become waste. In the manufacture of hazelnut shell briquettes, hazelnut shells are carbonized at 500 °, sifted with mesh 30 and 100 sieves, given a compressive load of 3 kg, 4 kg, 5 kg and 5.5 kg, the adhesive on hazelnut shell briquettes is starch and drying is carried out with a drying oven for 3 hours at a temperature of 80 °. The purpose of this study was to determine the effect of variations in pressure and particle size on the quality of hazelnut shell briquettes when viewed from the combustion rate and calorific value. The methodology used in this research is experimentation on hazelnut shell briquettes, testing hazelnut shell briquettes including testing water content, testing ash content, burning rate and calorific value of briquettes. From the results of the research on hazelnut shell briquettes with variations in pressure and mesh, the highest calorific value in hazelnut shell raw material briquettes is in the 5.5 Kg pressure specimen on mesh 30, namely 9855.18 Cal/gram and the bomb calorimeter test results are 7008.03 Cal/gram with an error rate of 24.40%, the higher the pressure will produce a higher calorific value as well. The highest combustion rate value is in hazelnut shell briquettes at a pressure specimen of 3 Kg mesh 100 with a value of 1.2 grams/minute the smaller the particle size, the higher or faster the combustion rate.

This research is a case study with the object of research on Tenun Ikat Ina Sabu located at Jalan Sukun I, RT 009 / RW 004, Oepura Village, Maulafa District, Kupang City, East Nusa Tenggara. The purpose of this study was to determine and explain the production planning of Tenun Ikat Ina Sabu in Kupang City. The types of data used are qualitative and quantitative. Data collection techniques in this study were interviews, observations, questionnaires and documentation. While the data analysis techniques used are Linear Trend and Break Even Point (BEP). The results of the Linear Trend calculation show that in 2024 Tenun Ikat Ina Sabu will produce 383 pieces of sarong, 358 pieces of blanket and 284 pieces of shawl, then the amount produced for 2025, 414 pieces of sarong, 332 pieces of blanket and 303 pieces of shawl, and the amount produced for 2026, 445 pieces of sarong, 402 pieces of blanket and 322 pieces of shawl. The results of the Break Even Point (BEP) analysis in 2023 show that if Tenun Ikat Ina Sabu produces 1,060 pieces of ikat weaving or around Rp.90,343,129, then the company does not make a profit or loss.

Briquettes are a type of alternative energy whose raw material source comes from agricultural waste such as coconut shells. Coconut shells are converted into charcoal which has a higher calorific value through the pyrolysis process. The aim of this research is to determine the effect of comparing particle size and printing pressure on the length of burning time and burning temperature, so as to obtain a briquette composition that is durable and produces high temperatures. In this research, the raw material used was shell waste with a drying process of 400°C and the particle size variations used were mesh 30, 150 and 250 mixed with 12 grams of starch adhesive. The briquette molding process uses 3 kg and 5 kg pressure, which are then dried using an oven at a temperature of 750°C for 3 hours. Tests were carried out on burning time, burning temperature, water content and ash content. From the research results, it was found that for the highest temperature, briquettes with a particle size of 250 mesh were produced with a pressure of 5 kg at 312°C, and the flame duration of the briquettes was 240 minutes.

The research entitled Production Planning of Tenun Ikat Petra Cilik in Kupang City aims to find out and explain the production planning of Tenun Ikat Petra Cilik in Kupang City.
Data collection techniques in this study are observation, interviews, documentation and questionnaires. While data analysis techniques use forecasting and Break Event Point (BEP).The results showed that the amount of sales forecast for sarongs at Tenun Ikat Petra Cilik in 2024 was 174 sheets, in 2025 as many as 202 sheets and 2026 as many as 219 sheets. For blankets in 2024 as many as 107 pieces, in 2025 as many as 110 pieces and in 2026 as many as 113 pieces. For sashes on Tenun Ikat Petra Cilik shows that in 2024 there were 199 sheets, in 2025 there were 201 sheets and in 2026 there were 204 sheets. The results of the Break Event Point (BEP) analysis show that if Tenun Ikat Petra Cilik in Kupang City produces 101 pieces of sarong or Rp.152,000,000, for blankets producing 162 pieces or Rp. 162,857,142 and sling producing 1,380 pieces or Rp.411.940.298, then Tenun Ikat Petra Cilik will not make a profit or not suffer a loss because at that point Tenun Ikat Petra Cilik is in a state of basic return. And if the company produces below the BEP point, the company will experience a loss, and vice versa if the company produces above the BEP point, the company will experience a profit. Based on the results of the study, it is recommended that it be taken into consideration for the company in relation to making decisions on determining the number of orders and good planning for the supply of woven raw materials in order to smooth the production process in the company. And for the company, Tenun Ikat Petra Cilik needs to make a production plan or the amount of production to be produced appropriately in order to provide maximum profit.
Produksi Keywords :Planning,Production
 
 

Christian religious education in schools has an important role in forming students' morals. This subject not only focuses on teaching religious doctrine, but also on forming character, ethical values, and attitudes that are in accordance with Christian teachings. In the context of formal education, Christian religious education functions as a means of instilling moral values such as honesty, responsibility, love and tolerance. This research aims to analyze how the implementation of Christian Religious Education in schools can influence students' moral formation, as well as the factors that support and hinder this process. The research method used is a qualitative approach with interviews, observation and document analysis as data collection techniques. The research results show that Christian religious education delivered with a contextual approach and relevant to students' lives can have a positive impact on their moral formation. Apart from that, the involvement of teachers who have good moral integrity and creative teaching methods is a determining factor for success. Thus, Christian religious education in schools has a strategic role in creating a young generation who have morals, character, and are able to live according to Christian principles amidst the challenges of the times.
 
 

Character can be formed and developed which is a person's characteristic from human behavior. Character can also be influenced by various things such as the human family's own experiences, the surrounding environment, religion, and a person's personality. The aim of Community Service (PKM) in the religious sector by the KKM group 40 of Cikerai Village is to increase children's participation in the formation of religious character through positive activities, namely religious activities. This needs to be done considering technological developments and the digitalization era that is currently trending in society. This PKM method uses a PKM approach based on community participation actions. The PKM results show that religious activities in the Cikerai Subdistrict area are quite strong in the community considering that there are still religious figures and community leaders who still adhere closely to religious and cultural principles. So there was collaborative participation from both children and religious leaders around the Sambidingko Village mosque as well as KKM students who took the initiative to hold this religious activity.