Klaim Artikel Anda
Verifikasi kepemilikan artikel akademik
Apakah artikel-artikel ini milik Anda?
Daftarkan diri Anda sebagai author untuk mengklaim artikel dan dapatkan profil akademik terverifikasi dengan fitur lengkap.
Badge Verifikasi
Profil terverifikasi resmi
Statistik Lengkap
H-index, sitasi, dan metrik
Visibilitas Tinggi
Tampil di direktori author
Kelola Publikasi
Dashboard artikel terpadu
Langkah-langkah Klaim Artikel:
- 1. Daftar akun author dengan email akademik Anda
- 2. Verifikasi email dan lengkapi profil
- 3. Login dan buka menu "Klaim Artikel"
- 4. Cari dan klaim artikel Anda
- 5. Tunggu verifikasi dari admin (1-3 hari kerja)
Menampilkan 1–10 dari 78 artikel
Studi Perbandingan Kualitas Batubara Berdasarkan Analisis Proksimat pada Dua Seam dengan Variasi Kedalaman di PIT North PT Karya Putra Borneo
Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan
Vol 4
, No 2
(2026)
This research aims to compare coal quality based on proximate analysis in two seams with varying depths in Pit North and evaluate the relationship between depth and coal quality parameters. The research method includes taking representative samples at each seam and proximate analysis laboratory testing including inherent moisture, ash content, volatile matter, and fixed carbon. The results showed that seam 1 at an average depth of 59.8 m had an inherent moisture value of 13.51%, ash 4.68%, volat...
Sumber Asli
Google Scholar
DOI
Evaluasi Perhitungan Volume Stockpile Batubara dengan menggunakan Alat Total Station di PT. Bukit Baiduri Energi, Kabupaten Kutai Kartanegara, Provinsi Kalimantan Timur
Muhammad Rofy Fauzan
; Henny Magdalena
; Lucia Litha Respati
; Windhu Nugroho
; Albertus Juvensius Pontus
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 4
, No 2
(2026)
Coal stockpile volume measurement is an essential part of mining production control. This study aims to evaluate the calculation of coal stockpile volume using a Total Station (TS) at PT. Bukit Baiduri Energi, Kutai Kartanegara Regency, East Kalimantan Province, and to assess the accuracy and effectiveness of this method in operational activities. Data acquisition was carried out through direct field measurements using a Total Station with a detailed surface point survey method. The collected da...
Sumber Asli
Google Scholar
DOI
Analisis Korelasi Hasil Pengujian Unconfined Compressive Strength (UCS) & Point Load Index (PLI) Batuan pada Formasi Kampungbaru, Kabupaten Kutai Kartanegara
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 4
, No 2
(2026)
Slope stability studies are crucial in determining the sustainability and operational safety of mining activities. This research was conducted to analyze the correlation between rock porosity and Unconfined Compressive Strength (UCS) results, as well as the corrleations between Point Load Index (PLI) and Unconfoned Compressive Strength (UCS) results. These two correlations form the primary components of the study. Three types of rock were tested claystone, coal, and siltstone. The results of the...
Sumber Asli
Google Scholar
DOI
Perancangan Media Infografis SOP Keselamatan Kerja (K3) Pada Lingkungan Industri Manufaktur
Daniel M Simbolon
; Bambang Tri Wardoyo
; Meily Cristina
; Ekananda Haryadi
; Menul Teguh Riyanti
; Wegig Murwonugroho
; Yosua Reydo Respati
; Dikdik Adikara Rachman
; Tommy Hari Prihatanto
; Leonardus Aryo Gitoprakoso Widyarto
Jurnal Riset Rumpun Seni, Desain dan Media
Vol 5
, No 1
(2026)
Occupational Health and Safety (OHS) is a crucial aspect in manufacturing industries due to the high risk of workplace accidents caused by heavy machinery, chemical substances, and intensive production activities. Companies usually provide Standard Operating Procedures (SOP) as safety guidelines; however, SOPs are often delivered in long textual formats that are less engaging, making workers reluctant to read or difficult to understand quickly. This study aims to design an infographic-based SOP...
Sumber Asli
Google Scholar
DOI
Analisis Pengaruh Powder Factor terhadap Flyrock dengan Metode Richard & Moore di PT. Sims Jaya Kaltim Kabupaten Paser Kalimantan Timur
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 4
, No 1
(2026)
One of the risk impacts of blasting activities is flyrock. The impact of flyrock can be minimized by evaluate the factors that influence flyrock such as blasting geometry. Flyrock cannot be completely eliminated but flyrock distance can be reduced to prevent damage. This study aims to determine the actual maximum flyrock distance in the field and the factors that influence the flyrock distance. This study was conducted at PT. Sims Jaya Kaltim, Paser Regency, East Kalimantan Province. This resear...
Sumber Asli
Google Scholar
DOI
Efektivitas Campuran Karbon Aktif Daun Nanas–Batubara dalam Peningkatan pH dan Penurunan Fe, Mn, serta TSS Air Asam Tambang PT Alreksa Bara Mitra
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 4
, No 1
(2026)
Acid mine drainage (AMD) is characterized by low pH and high concentrations of heavy metals such as iron (Fe) and manganese (Mn) that exceed environmental quality standards, thus requiring effective treatment to prevent environmental pollution. This study aims to evaluate the ability of a mixture of activated carbon derived from pineapple leaves mixed with coal to increase pH and reduce Fe, Mn, and Total Suspended Solids (TSS) levels in acid mine drainage at PT Alreksa Bara Mitra. The process to...
Sumber Asli
Google Scholar
DOI
Perbandingan Perhitungan Volume Batubara Stock Rom Mengunakan Hasil Pengukuran Total Station dan Unmanned Aerial Vehicle di PT Victor Dua Tiga
Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan
Vol 4
, No 1
(2026)
Measuring coal volume in the Stock ROM area played an important role in production control and mining evaluation. This research was conducted in the Stock ROM area at PT. Victor Dua Tiga Mega, where volume measurements were generally carried out using Total Station (TS) as the main method, howefer the use of Unmanned Aerial Vehicles (UAV) has begun to be implemented as a more efficient alternative. This study aims to compare the results of Stock ROM coal volume calculations using the Total Stati...
Sumber Asli
Google Scholar
DOI
Analisis Pergerakan Lereng Tambang Menggunakan Alat CHCNAV PS 2000 di PT Insani Bara Perkasa Kabupaten Kutai Kartanegara Provinsi Kalimantan Timur
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 4
, No 1
(2026)
Mine slopes play a crucial role in ensuring the safety and sustainability of mining activities. Continuous mining operations can alter slope conditions, thereby increasing the potential for instability and slope failures. Slope stability is influenced by the balance between resisting forces and driving forces acting on the rock mass. When the resisting forces are smaller than the driving forces, the slope becomes unstable and failure may occur. Therefore, slope stability analysis is essential to...
Sumber Asli
Google Scholar
DOI
The Effect of Work Skills and Work Flexibility on Work Productivity trough Job Satisfaction of Gojek Partners in the City of Malang
International Journal of Management Science and Entrepreneurship
Vol 3
, No 1
(2026)
This study aims to analyze how work skills and work flexibility affect work productivity through job satisfaction as an intervention variable among Gojek partners in the Malang City area. This study uses a quantitative methodology with a causality design. Using simple random sampling, questionnaires were sent to 120 selected Gojek partners to obtain initial data. A Structural Equation Modeling (SEM) based on linear regression analysis was used to analyze the data. This was done using the SPSS pr...
Sumber Asli
Google Scholar
DOI
Penentuan Nilai Peak Particle Velocity Peledakan Berdasarkan Analisis Regresi Non Linear dan US Bureau Of Mines Oriard’s Formula pada Pit Pinang PT Bukit Baiduri Energi
Djuwita Dela Safitri
; Tommy Trides
; Agus Winarno
; Albertus Juvensius Pontus
; Lucia Litha Respati
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 3
, No 6
(2025)
This research investigates the Peak Particle Velocity (PPV) resulting from blasting operations at Pit Pinang, PT Bukit Baiduri Energi, employing two prediction approaches: Non-Linear Geometric Regression and the USBM Oriard’s Formula. Ground vibration measurements were recorded over a one-month period, from October 9 to November 8, 2025. The findings indicate that the non-linear regression model achieves a higher predictive accuracy of 78.62%, outperforming the USBM Oriard’s Formula, which reach...
Sumber Asli
Google Scholar
DOI