Klaim Artikel Anda
Verifikasi kepemilikan artikel akademik
Apakah artikel-artikel ini milik Anda?
Daftarkan diri Anda sebagai author untuk mengklaim artikel dan dapatkan profil akademik terverifikasi dengan fitur lengkap.
Badge Verifikasi
Profil terverifikasi resmi
Statistik Lengkap
H-index, sitasi, dan metrik
Visibilitas Tinggi
Tampil di direktori author
Kelola Publikasi
Dashboard artikel terpadu
Langkah-langkah Klaim Artikel:
- 1. Daftar akun author dengan email akademik Anda
- 2. Verifikasi email dan lengkapi profil
- 3. Login dan buka menu "Klaim Artikel"
- 4. Cari dan klaim artikel Anda
- 5. Tunggu verifikasi dari admin (1-3 hari kerja)
Menampilkan 1–10 dari 22 artikel
Analisis Karakteristik Tanah Berdasarkan Uji Lapangan Sondir (Cone Penetration Test) & Uji Laboratorium pada PIT North PT Karya Putra Borneo
Yuana Saputra
; Revia Oktaviani
; Rety Winonazada
; Tommy Trides
; Albertus Juvensius Pontus
Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan
Vol 4
, No 1
(2026)
This study aims to analyze the characteristics of the soil at PIT North with two highwall and lowwall locations at PT Karya Putra Borneo, Kutai Kartanegara Regency, East Kalimantan Province. The research method was carried out by collecting primary data from the results of field tests using the sondir method with the Cone Penetration Test(CPT) tool and laboratory tests using physical properties, specific gravity, grain size, soil consistency, and consolidation tests, as well as secondary data fr...
Sumber Asli
Google Scholar
DOI
Studi Pengaruh Derajat Kejenuhan Terhadap Kuat Geser Tanah
Anandyta Suci Ramdani
; Revia Oktaviani
; Ardhan Ismail
; Tommy Trides
; Albertus Juvensius Pontus
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 4
, No 1
(2026)
Soil strength characteristics are strongly influenced by its physical and mechanical properties, one of which is shear strength. Soil shear strength is affected by cohesion (c), internal friction angle (ϕ), and soil moisture conditions. In open-pit mining conditions, soil moisture content is greatly influenced by rainfall and water seepage, which can increase the degree of saturation within the soil mass. An increase in the degree of saturation generally leads to a rise in pore water pressure, t...
Sumber Asli
Google Scholar
DOI
Analisis Pergerakan Lereng Tambang Menggunakan Alat CHCNAV PS 2000 di PT Insani Bara Perkasa Kabupaten Kutai Kartanegara Provinsi Kalimantan Timur
Muhammad Iksan Hamsyah
; Revia Oktaviani
; Lucia Litha Respati
; Tommy Trides
; Agus Winarno
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 4
, No 1
(2026)
Mine slopes play a crucial role in ensuring the safety and sustainability of mining activities. Continuous mining operations can alter slope conditions, thereby increasing the potential for instability and slope failures. Slope stability is influenced by the balance between resisting forces and driving forces acting on the rock mass. When the resisting forces are smaller than the driving forces, the slope becomes unstable and failure may occur. Therefore, slope stability analysis is essential to...
Sumber Asli
Google Scholar
DOI
Perencanaan Counterweight untuk Meningkatkan Kestabilan Lereng dan Kapasitas Disposal pada Area Disposal T4 PT Unggul Dinamika Utama Provinsi Kalimantan Timur
Nurfitri Kasran
; Revia Oktaviani
; Ardhan Ismail
; Tommy Trides
; Albert Juvensius Pontus
Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan
Vol 4
, No 1
(2026)
The stability of disposal slopes is a critical aspect of open-pit mining operations because it directly affects operational safety and the continuity of overburden dumping activities. Disposal areas composed of overburden materials generally exhibit heterogeneous characteristics, particularly when soft materials such as mud are present, which can significantly reduce slope stability. Therefore, a comprehensive slope stability evaluation is required prior to further disposal development. This stu...
Sumber Asli
Google Scholar
DOI
Studi Kestabilan Lereng Sandstone dengan Metode Bishop Simplified di Samarinda Ulu, Kalimantan Timur
Muhammad Hamzah
; Tommy Trides
; Revia Oktaviani
; Lucia Litha
; Albertus Juvensius
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 3
, No 6
(2025)
A research about study of sandstone slope stability using the Bishop Simplified method in Uu Samarinda has been conducted. This study was conducted to analyze the rebound number values of sandstone slopes, evaluate their stability level, and calculate the safety factor using the Bishop method. The results showed that the rebound number values were 22.34 at point 1, 19.83 at point 2, and 18.07 at point 3. The Uniaxial Compressive Strength (UCS) values at the observation points were 1.90 MPa, 1.62...
Sumber Asli
Google Scholar
DOI
Studi Pengaruh Lama Penumpukan Batubara terhadap Kualitas Proximate Batubara di ROM Coal Stockpile pada PT Multi Harapan Utama Kabupaten Kutai Kartanegara Provinsi Kalimantan Timur
Ronal Ronal
; Windhu Nugroho
; Revia Oktaviani
; Agus Winarno
; Ardhan Ismail
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 3
, No 6
(2025)
During the coal stockpiling process, the quality of coal may increase or decrease due to direct exposure to open environmental conditions, which can lead to changes in its characteristics. The longer the coal is stored in an open area, the more it undergoes changes caused by rainfall, heat, and air exposure, resulting in an increase in moisture content and ash content, while the calorific value decreases. Therefore, this research was conducted to determine the optimal coal stockpiling duration a...
Sumber Asli
Google Scholar
DOI
Studi Kehilangan Volume Batugamping pada Kegiatan Peledakan dan Crushing di PT. Yusrina Borneo Quantum Kecamatan Loakulu Kabupaten Kutai Kartanegara, Provinsi Kalimantan Timur
Muhammad Aji Satria Mandiri
; Revia Oktaviani
; Agus Winarno
; Tommy Trides
; Windhu Nugroho
Bilangan : Jurnal Ilmiah Matematika, Kebumian dan Angkasa
Vol 3
, No 6
(2025)
Blasting and crushing are essential stages in the limestone mining process; however, both stages may contribute to material volume loss due to technical factors and geological conditions. This study aims to analyze the blasted volume, crushed volume, and the amount of volume loss occurring throughout these processes. The research utilizes primary data including blasting geometry, blasting patterns, crushing production, and secondary data such as regional geology and equipment specifications. Bas...
Sumber Asli
Google Scholar
DOI
Studi Pengaruh Geometri Peledakan terhadap Biaya Pemboran dan Biaya Peledakan pada PT Unggul Dinamika Utama Kabupaten Kutai Timur Provinsi Kalimantan Timur
Berliani Wahyu Ningrum
; Tommy Trides
; Rety Winonazada
; Revia Oktaviani
; Lucia Litha Respati
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 3
, No 5
(2025)
This study aims to analyze the effect of blasting geometry on drilling and blasting costs in mining operations at PT Unggul Dinamika Utama, Kutai Timur Regency, East Kalimantan Province. The research focuses on comparing two operational areas, namely PIT Tempudo 6 and PIT East, which apply different blasting geometries: a burden of 7 m and spacing of 8 m at PIT Tempudo 6, and a burden of 8 m and spacing of 9 m at PIT East. The research method involved collecting primary data from actual field dr...
Sumber Asli
Google Scholar
DOI
Pengaruh Kadar Air terhadap Nilai Kuat Geser Batulempung pada Cekungan Kutai Menggunakan Metode Direct Shear di Provinsi Kalimantan Timur
Muhammad Rahul Shidiq
; Tommy Trides
; Albertus Juvensius Pontus
; Revia Oktaviani
; Ardhan Ismail
; Rety Winonazada
Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan
Vol 3
, No 3
(2025)
In the Kutai Basin area, seasonal changes such as high rainfall can significantly increase groundwater content, so that the effect of water content on the shear strength of claystone, increasing water content in rocks tends to decrease shear strength. Water in the pores or fractures can increase pore water pressure and reduce effective normal stress. Shear strength is one of the most important mechanical parameters used to assess soil and rock stability, this parameter is very important in slope...
Sumber Asli
Google Scholar
DOI
Analisis Pengaruh Number of Cycles terhadap Pengujian Durability Slake Batulempung pada Formasi Balikpapan dan Formasi Kampung Baru Kabupaten Kutai Kartanegara Provinsi Kalimantan Timur
Muhammad Ashar Alias Suara
; Tommy Trides
; Rety Winonazada
; Revia Oktaviani
; Windhu Nugroho
; Lucia Litha Respati
; Henny Magdalena
Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan
Vol 3
, No 3
(2025)
Durability is defined as a measure of a rock's resistance to weathering and disintegration when the rock undergoes weathering processes over a short period of time. The susceptibility of rocks to disintegration is related to their low durability. Rock durability is often measured using the slake durability test. The slake durability test is widely used to assess physical changes resulting from wetting-drying processes (Franklin and Chandra, 1972). Therefore, slake durability testing is conducted...
Sumber Asli
Google Scholar
DOI