Klaim Artikel Anda
Verifikasi kepemilikan artikel akademik
Apakah artikel-artikel ini milik Anda?
Daftarkan diri Anda sebagai author untuk mengklaim artikel dan dapatkan profil akademik terverifikasi dengan fitur lengkap.
Badge Verifikasi
Profil terverifikasi resmi
Statistik Lengkap
H-index, sitasi, dan metrik
Visibilitas Tinggi
Tampil di direktori author
Kelola Publikasi
Dashboard artikel terpadu
Langkah-langkah Klaim Artikel:
- 1. Daftar akun author dengan email akademik Anda
- 2. Verifikasi email dan lengkapi profil
- 3. Login dan buka menu "Klaim Artikel"
- 4. Cari dan klaim artikel Anda
- 5. Tunggu verifikasi dari admin (1-3 hari kerja)
Menampilkan 1–10 dari 15 artikel
Perbandingan Perhitungan Volume Batubara Stock Rom Mengunakan Hasil Pengukuran Total Station dan Unmanned Aerial Vehicle di PT Victor Dua Tiga
Adit Ajie Nugraha
; Lucia Litha Respati
; Windhu Nugroho
; Henny Magdalena
; Agus Winarno
Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan
Vol 4
, No 1
(2026)
Measuring coal volume in the Stock ROM area played an important role in production control and mining evaluation. This research was conducted in the Stock ROM area at PT. Victor Dua Tiga Mega, where volume measurements were generally carried out using Total Station (TS) as the main method, howefer the use of Unmanned Aerial Vehicles (UAV) has begun to be implemented as a more efficient alternative. This study aims to compare the results of Stock ROM coal volume calculations using the Total Stati...
Sumber Asli
Google Scholar
DOI
Evaluasi Kinerja Alat Gali Muat dan Alat Angkut dengan Metode Match Factor pada Operasi Pengupasan Overburden pada Pit Tengah di PT. Bumi Artlantis Raya Kabupaten Berau
Mustafa Wadi
; Henny Magdalena
; Tommy Trides
Konstruksi: Publikasi Ilmu Teknik, Perencanaan Tata Ruang dan Teknik Sipil
Vol 3
, No 1
(2025)
Overburden stripping operations in the coal mining industry require optimal performance of loading and hauling equipment to achieve production efficiency. This study aims to evaluate the performance of loading and hauling equipment using the Match Factor method in overburden stripping operations at PT Bumi Artlantis Raya. The results indicate that the equipment combination achieved a Match Factor of 0.85, reflecting moderate compatibility with a potential efficiency improvement of 15%. The actua...
Sumber Asli
Google Scholar
DOI
Analisis Perbandingan Kualitas Proximate Batubara Pada PIT B1 dengan ROM Coal Stockpile KM4 di PT. Trisensa Mineral Utama Kecamatan Loa Janan Kabupaten Kutai Kartanegara Provinsi Kalimantan Timur
Ardian Saputra
; Windhu Nugroho
; Henny Magdalena
; Agus Winarno
; Albertus Juvensius Pontus
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 3
, No 6
(2025)
Coal quality must be controlled from the pit area to the ROM stockpile to ensure compliance with market specifications. However, hauling and stockpiling processes often lead to changes in coal characteristics. This study aims to analyze variations in proximate parameters between coal from Pit B1 and ROM Stockpile Km4 at PT Trisensa Mineral Utama and to identify factors contributing to these changes. The methodology includes field sampling at both locations, sample preparation based on ASTM stand...
Sumber Asli
Google Scholar
DOI
Studi Pencampuran Batubara untuk Memenuhi Permintaan Konsumen di PT Bukit Baiduri Energi, Kutai Kartanegara, Kalimantan Timur
Ferry Potik Kurniawan
; Agus Winarno
; Henny Magdalena
; Windhu Nugroho
; Rety Winonazada
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 3
, No 4
(2025)
The coal blending process conducted by PT. Bukit Baiduri Energi (PT. BBE) aims to achieve coal quality specifications that align with customer requirements. PT. BBE possesses multiple coal seams with varying quality characteristics, necessitating a carefully planned blending system with precise proportions to produce coal products that meet market demands. The objectives of this study are: to plan the quantity and quality parameters for coal blending, to evaluate the actual outcomes of coal blen...
Sumber Asli
Google Scholar
DOI
Analisis Pengaruh Number of Cycles terhadap Pengujian Durability Slake Batulempung pada Formasi Balikpapan dan Formasi Kampung Baru Kabupaten Kutai Kartanegara Provinsi Kalimantan Timur
Muhammad Ashar Alias Suara
; Tommy Trides
; Rety Winonazada
; Revia Oktaviani
; Windhu Nugroho
; Lucia Litha Respati
; Henny Magdalena
Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan
Vol 3
, No 3
(2025)
Durability is defined as a measure of a rock's resistance to weathering and disintegration when the rock undergoes weathering processes over a short period of time. The susceptibility of rocks to disintegration is related to their low durability. Rock durability is often measured using the slake durability test. The slake durability test is widely used to assess physical changes resulting from wetting-drying processes (Franklin and Chandra, 1972). Therefore, slake durability testing is conducted...
Sumber Asli
Google Scholar
DOI
Evaluasi Unjuk Kerja Alat Gali-Muat pada Kegiatan Penambangan Batubara di PT. Insani Bara Perkasa Site Kam 11 Loajanan Kalimantan Timur
Ruslan Patur
; Harjuni Hasan
; Henny Magdalena
; Shalaho Dina Devi
; Ardhan Ismail
; Tommy Trides
Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan
Vol 3
, No 3
(2025)
This study aims to evaluate the performance of the loading and unloading equipment in coal mining activities at the Mahakam Pit, PT Insani Bara Perkasa Site Km 11, East Kalimantan. The research was motivated by the importance of achieving mechanical equipment performance standards according to the Decree of the Minister of Energy and Mineral Resources No. 1827 of 2018. Data were obtained through direct observation and analysis of actual working time and evaluation of operational constraint facto...
Sumber Asli
Google Scholar
DOI
Perbandingan Perhitungan Volume Stockpile Batu Andesit Menggunakan Alat Survey Terrestrial Laser Scanner dan Global Positioning Sistem Real Time Kinematik pada PT. Bara Tabang
Gideon Samari Suno
; Henny Magdalena
; Windhu Nugroho
; Agus Winarno
; Tommy Trides
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 3
, No 3
(2025)
Stockpiles are accumulations of materials such as coal or ore stored at specific locations. Accurate stockpile volume measurement is crucial in the mining and logistics industries for inventory management and cost efficiency. Conventional methods like Real-Time Kinematic (RTK) GPS rely on surface coordinate measurements but require numerous points, especially for irregular-shaped objects. Newer technologies like Terrestrial Laser Scanners (TLS) offer high-precision alternatives by capturing thou...
Sumber Asli
Google Scholar
DOI
Analisis Biaya Fuel Consumption Alat Angkut Dump Truck dalam Aktivitas Pengangkutan Overburden PIT A9 PT. Mitra Abadi Mahakam Jobsite PT. Bukit Baiduri Energi
Fajar Ramadhan
; Harjuni Hasan
; Albertus Juvensius Pontus
; Henny Magdalena
; Ardhan Ismail
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 3
, No 3
(2025)
Mitra Abadi Mahakam as a contractor operating at PT. Bukit Baiduri Energi's jobsite, especially in the Pit A9 area, faces operational challenges related to variations in haul road grades. Differences in road gradients on the overburden hauling route have the potential to cause significant differences in fuel consumption between dump truck units, which ultimately affects the overall efficiency of hauling activities. The study was conducted quantitatively with primary and secondary data requiremen...
Sumber Asli
Google Scholar
DOI
Evaluasi Kegiatan Rehandling Batubara dan Kesesuaian Rencana Crushing pada ROM Port Area 2 PT Multi Harapan Utama
Nirwana Putri
; Windhu Nugroho
; Tommy Trides
; Henny Magdalena
; Harjuni Hasan
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 3
, No 3
(2025)
In rehandling activities In coal processing activities, mechanical tools such as crushers are needed to obtain production results in accordance with the company's desired targets according to the crusher target, therefore in processing it is necessary to carry out precise calculations, so that the ability of the tool (crusher) and know what things greatly affect the production processing process, so that it can be used optimally and has a high efficiency value for optimal production. Therefore,...
Sumber Asli
Google Scholar
DOI
Analisis Coal Recovery dan Coal Losses pada Rangkaian Penambangan PIT X PT. Jembayan Muarabara Kutai Kartanegara, Kalimantan Timur
Evita Endar Apriliana
; Windhu Nugroho
; Henny Magdalena
; Shalaho Dyna Devy
; Agus Winarno
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 3
, No 3
(2025)
In mining activities, there is often a discrepancy between the plan and the actual conditions in the field, this discrepancy was found after reconciliation at the end of the progress (month). From the mining activities carried out by PT. Jembayan Muarabara (JMB), coal roof floor data was obtained from the survey which was then used to find survey tonnage, model tonnage data and actual tonnage scales. Then from this data it can be used to obtain coal recovery, coal looses in coal cleaning, loadin...
Sumber Asli
Google Scholar
DOI