Publication Search

KSP (Koperasi Simpan Pinjam) Makmur Mandiri bergerak dalam usaha perkreditan yang menyediakan pinjaman atau kredit sebagai mana koperasi pada umumnya. Sistem penerimaan pinjaman dalam KSP Makmur Mandiri yang sedang berjalan dilakukan dengan cara calon peminjam datang ke lokasi koperasi dengan mengajukan peminjaman kemudian karyawan mendata peminjam ke dalam form rekomendasi anggota setelah itu form rekomendasi anggota tersebut diberikan kepada pimpinan koperasi. Masalah yang terjadi pada KSP Makmur Mandiri adalah kehadiran pimpinan koperasi yang sering tidak ada di koperasi, sehingga pengajuan pinjaman yang ada di koperasi menumpuk dan tidak dapat segera di tentukan hasil kelayakan pinjaman. Selain itu masalah yang juga terjadi di koperasi adalah penilaian yang dilakukan pimpinan dalam menentukan kelayakan pinjaman masih bersifat subyektif yaitu hanya memberikan keputusan layak atau tidak seorang peminjam, tanpa memperhitungkan persentase nilai kelayakan pinjaman  tersebut. Solusi untuk menyelesaikan masalah ini maka dibuatlah sebuah keputusan penentuan kelayakan yang mampu membantu pimpinan dalam proses penilaian dan memberikan perhitungan tepat dalam menilai kelayakan pinjaman. Metode yang dapat mendukung keputusan adalah Fuzzy logic, karena penilain yang bersifat subyektif atau non-linear dapat dimodelkan dan dihitung secara tepat.

The information system for purchases and cash disbursements is one of the entire information systems. In retail sales companies need control of purchases and cash disbursements that are precise and fast. In an effort to minimize sudden out-of-stock inventory, it is necessary to secure an inventory to cope with a sudden out of stock due to delays in purchasing goods that occur at CV. New Space. This is what encourages the author to conduct research on CV. Angkasa Baru and choose the title "Purchasing Information System and Cash Distribution at CV. New Space. In writing this research systemin formation, the author uses the Microsoft Visual Basic 6.0 application, the research writing method uses the Research and Development (R&D) model, while the stages of this research model go through the stages of observation or interviews with parties related to the data required in writing this thesis, stages of designing the application system, designing specifications, validation test stages, revision of validation until the system passes. The development method used by the author is the prototype method, where the system created will be tailored to the needs of the user, if there is a change in the system it will be repaired until the user is satisfied with the system.

Dian Wacana Demak Christian Kindergarten-Kindergarten School, which is one of the agencies engaged in the science and early childhood education. The type of data used is qualitative and quantitative data. The research objective is to design an effective and efficient school financial administration recording information system and design a school financial administration recording information system that has a system security that can maintain the correctness of the data. The research method used is the Borg and Gall R&D Development Research model, the Prototyping System Development Method to produce a product in the form of a prototype with 6 stages: Research and Data Collection, Planning, Initial Product Development, Product Testing, Product Revision, Final Trial. The conclusion from the results of this study is that this system can facilitate the recording of cash in and cash out transactions so that there are no mistakes in recording, users can easily present cash reports more quickly so that they can minimize recording time and recording errors, and make it easier for users to print. cash reports with accurate results so as to support and speed up decision making.

The development of technology allows one to obtain other people's spatial position data. One mobile technology that utilizes spatial data as a supported factor is location-based services. The large number of employees at the PT.XYZ causes the presence of a controlled process to be under control, and even tends to be questioned. Because it takes a GPS-based presence system on android that is expected to be a solution of the problems that occur at this time. The system development method used is a six-step R&D method, consisting of: Research and information gathering, Planning, Development of initial product forms, initial field testing, major product revisions, main field testing. The final result is the prototype of the Ganesha Employee Presence System Operations. The test results on the system shows the employee attendance system can run on the android platform. The system only responds to presence based on the position of the employee's coordinates with office coordinates. Besides checking the presence process is also based on devices that have been approved in the system. 

Over time, the Riau Kepualaun Provincial Tax Management Office which lives in Batam City underwent a name change to become a Regional Tax and Retribution Management Agency for the Riau Islands Province (BP2RD). This study aims to design a dashboard that can assist Eschelon officials in monitoring the performance of the State Civil Apparatus (ASN) at the Regional Tax and Retribution Management Agency of the Riau Islands Province. Because there is no system that displays information related to the work done and completed by an ASN, a dashboard design is needed. Data on the dashboard system is obtained from ASN performance data consisting of activity grouping data, activity weights, monthly targets in one year, and distribution of incentives and employee income benefits based on the achievement of target weights. The modeling system used is the Unified Modeling Language (UML), with the use case, activity, sequence and class diagram stages. While the development of this research system uses the Macro Process method in Object Oriented Analysis Design (OOAD) with the stages of Requirements, Analysis and Design, Implementation and Testing. The dashboard is designed based on a website, using the PHP programming language and using MySQL as the database. Qualitative research techniques, by collecting data and information descriptively. The results of this study display a dashboard in the form of text consisting of the number of employees, targets, target achievement, target percentage, target employee income allowances, and employee income allowances obtained, as well as a dashboard in the form of a pie chart and bar chart for target and achievement percentages respectively. target, it is hoped that this dashboard can assist Eschelon Officials in assessing and monitoring the performance of the State civil apparatus.

Irrigation is a land irrigation system by damming water sources. Irrigation as the provision, regulation and disposal of water to support agricultural needs. Irrigation is generally used by farmers, especially farmers in rice fields to irrigate and provide water supply to agricultural land, monitoring water stock in rice fields must be done frequently because rice water needs must be balanced with a lack of water supply or excess water supply in rice fields is not good for rice growth . So far, farmers have monitored irrigation channels manually, the location of the rice fields from the farmer's house often causes rice plants to experience scarcity because the floodgates are not opened when the water supply is running low or experiencing water supply. excess because the floodgates are opened for too long, this will greatly disturb the growth of rice plants. Making a monitoring and control system for irrigation channels using a water level sensor installed on the ESP 8266 microcontroller (Wemos D1), the system uses a programming language c. This tool can be used to open the irrigation door if the water supply in the rice fields is below the minimum limit and will close the water gate when the water supply has reached the maximum limit, the servo motor is used to open and close the floodgates. . . The monitoring results obtained will be displayed to users in real time through the android application interface and will be stored in the form of a text file on the storage media.

The internet as a communicator of information is now a necessity. Particularly in the provision of information for a company, government organizations / agencies such as Village Centers that require a fast, precise and accurate data management system that can provide more complete, up-to-date, interactive and dynamic information. In Demangharjo Village the information system related to Village Information is still submitted in the form of a guide book and the service is still done manually. Basically, population residence service activities are required to take care of application letters at the village office with the applicable procedures, so that in practice it will certainly take a long time and energy. For this reason the author made the Final Project concerning the Design of Demangharjo Village Website with the metedo Waterfall. Through this website, it is expected that information will be conveyed more quickly and accurately, maximum service and information transparency, village introduction process and population data storage to accelerate the work of village officials in serving the community and make it easier for citizens to submit services or find out village information.  

Multimedia learning software development requires design methods, development tools, examination models and proficiency in Information Technology systems. It is necessary to formulate a Holistic Method which considers all related aspects in order to guide the quality of good design in designing Multimedia Learning. Implementing the findings of the Holistic Method formulation to build multimedia learning with good design quality. This study formulates the stages of multimedia development which include: Creative Brief, Design, Material Preparation, Compiling, Testing, Distribution. The multimedia software development process will be guided by 15 guiding elements which are grouped into 5 elements, include : content, appearance, utility aspect, user caracter, and didactic. These guiding elements are used to produce good quality learning multimedia designs. The methodology is called Holistic Multimedia Development Model (HMDM).

Diskless server is a cluster computer network which uses SSH (Secure Shell) protocol to grant the client an access to the host's directory and modify it's content so that the client don't need a hardisk (Thin Client). One way to design a diskless server is by utilizing "Linux Terminal Server Project", an open source-based script for Linux. However, using Linux has it own drawback, such as it can't cross platform for running an aplication based on Windows system which are commonly used. This drawback can be overcomed by using a compatibility layer that converts a windows-based application's source code. The data which will be monitored is the compatibility layer implementation's result, and the throughput, packet loss, delay, and jitter. The result of measurement from those four parameters resulting in "Excellent" for throughput, "Perfect" for packet loss and delay, and "Good" for jitter.

For blind people, assistive devices to carry out daily activities are needed. If you don't use assistive devices, blind people will experience difficulties when carrying out daily activities such as reaching the obstacles that are near them. In designing the system using the Arduino UNO R3 microcontroller board as a controller, five ultrasonic proximity sensors to determine the distance and position from the user to the front and lower obstacles. In addition, the MP3 module and headseat are used as a marker for sound in the form of sound when detecting an object and the SIM800L module is used to send SMS and the GPS module is used to determine coordinates. The validation test shows the value of 31.5 is between 31- 40 which means that it is located in a Very Good (Valid) value. Keywords: Walking Aid, Blind, Ultrasonic Sensor, Microcontroller, Arduino Uno, GPS

Oil palm is Indonesia's leading and prime plantation commodity. Plants whose main products consist of palm oil (CPO) and palm kernel oil (KPO) have high economic value and are one of the largest foreign exchange earners compared to other plantation commodities (Fauzi, 2012) PT. Safety Pin River Purun is a company that manages palm kernel products with the products produced there are 2 types, namely CPKO (Cruide Palm Kernel Oil) and PKM (Palm Kernel Meal). From the results of the study it was found that the prototype design was made capable of producing palm kernel assessment calculations using AHP in the assessment process, while the prototype model used was to use the prototyping model method. With this research can be beneficial for the management of PT. The Sungai Purun pin in the process of evaluating palm kernel is more effective and accurate in producing reports

In the era of information and technological developments that are very rapid as it is today, in the context of managing human resources in a company or what is known as a personnel management information system. The problems faced by PT. Nerangi Sarana Karya, namely until now, the staffing data management is still using a manual system that is not well computerized, does not have a database as a data storage medium, data sharing is not via the network and still uses hardcopy printouts. Seeing the problems that occur in the personnel administration subdivision of PT. Nerangi Sarana Karya, the author intends to develop a web-based personnel information system (SIMPEG) to hide staffing master data, employee data, promotions, and periodic salary increase data. using PHP and MySQL. The system development method that I use is AHP. In the end, this system can provide output to its users in the form of a promotion decree, a regular salary increase decree and employee reports.

Product distribution is a crucial element of the supply chain system that ensures the smooth flow of goods from producers to consumers at minimal cost and with high reliability. Distribution efficiency not only reduces operational costs but also improves customer satisfaction, market competitiveness, and business sustainability. In the context of Micro, Small, and Medium Enterprises (MSMEs), distribution efficiency becomes even more critical due to limited financial, human, and infrastructural resources. This study aims to analyze the product distribution efficiency of UMKM Kerupuk Jaya Pesona, located in Cinanggung Village, Serang Regency, Banten Province, by applying two classical transportation methods: the North West Corner (NWC) and Least Cost (LC) methods. Both methods were used to determine the allocation pattern that minimizes total transportation cost across three destination regions: Serang, Cilegon, and Pandeglang. The data include three couriers (as supply sources) and three market destinations (as demands), totaling 18,000 product units per distribution cycle. The results show that both NWC and LC methods yield the same total transportation cost of Rp 358,000,000, although their allocation patterns differ. This indicates that the supply–demand and cost structure of the UMKM’s logistics system is balanced. This research concludes that simple optimization methods such as NWC and LC can serve as practical decision-support tools for MSMEs without requiring complex computational models. The study also recommends the application of the Modified Distribution (MODI) method to verify the optimality of the solution and highlights the importance of logistics efficiency in strengthening MSME competitiveness in the digital era.

With the increasing development of technology the more variety of books circulating on the internet. As is the recommendation system on online book sites that provide books relevantly and as needed with one's preferences. One alternative is GoodReads, a social networking site that specializes in cataloging books and users can share reading book recommendations with each other by rating, reviewing, and commenting. As a large book recommendation site, it has a lot of data that can be processed by applying machine learning methods, but still not known as the most accurate model. By using the right model, we can provide more accurate recommendations. Therefore, this study will analyze the data obtained from the www.kaggle.com namely the goodreads-books dataset. This study proposed a data mining classification model to get the best model in recommending books on GoodReads. The algorithms used are Decision Tree, K-Nearest Neighbor, Naïve Bayes, Random Forest, and Support Vector Classifier, then for model evaluation using accuracy, precision, recall, f1-score, confusion matrix, AUC, and Mean Error Absolute. The test results of several classification algorithms found that Decision Tree has the highest accuracy among the methods presented by 99.95%, precision by 100%, recall by 96%, f1-score of 98% with MAE of 0.05 and AUC of 99.96%. This is proof that decision tree algorithms can be used as book recommendations based on book categories on GoodReads.

Management of school funds in the form of SPP (Educational Development Donations) at the Kranggan foundation sourced from kindergarten, elementary and junior high schools so far is still managed manually, making it difficult and takes a long time for the Administration to check lists for students who have made payments. Every month. In this study, an SPP payment system was made using an SMS Gateway with the web scraping method. In the development process using the prototype method. The researcher aims to develop a web-based information system that is expected to help manage school payment data for the better. The information system will be equipped with an SMS feature that will be sent to the parents of the students concerned so they can know that the school payment has been made. This SMS feature is also useful for sending reports of late payments or SPP arrears to parents of students whose children are late in paying tuition fees. With this program, students can also make tuition payments in two ways. The first is manually or submitting payment to the TU at the school. The second is by means of money transfer payments through banks.

Cloud computing is a technology that makes the internet a center for managing data and applications. With computer users are granted access (login). Cloud is a metaphor for the internet, as the cloud is often depicted in computer network diagrams. Gayo’s openwork cloud application is an android bases application that utilizes Cloud computing technology in the form of cloud Platform as a Service (SAAS) function as the main container or basis for running the system that will use in sales and providing notification services for the search for souvenirs typical of Takengon, namely Kerawang Gayo. Cloud computing is a technology that makes the internet a central storage server for managing data and information. This technology also allows users to freely manage and access information available on cloud storage which is of course connected to the internet network. This gayo filigree is now being created as a result of the home craft industry being embroidered on the cloth. The craft produces various types of souvenirs such as bags, key chains, women’s robes, men’s shirts, caps, bracelets, wallets, prayer mats, tablecloths, pillowcases, cellphone covers, and women’s and men’s traditional clothes, skirts, and scarves. Using the prototyping method is a software development method in the form of a physical working model of the system that functions as an early version of the system.

Department of Culture , Tourism , Youth and Sports Central Aceh district especially in tourism is in charge of managing and developing infrastructure for tourism, the selection of a tourist attraction right capable of giving the best decision with the information on the sights with AHP ( Analytical Hierarchy Prsocess ) that match the criteria , Election Decision Support System using AHP Attractions Java based , Using Netbeans and MySQL as data storage .

Information technology concerning the use of computers in a government service is needed to facilitate a job in an agency. One of them is in the Community Empowerment and Village Government Agency, Central Aceh Regency, where data management for poor households is still using the manual method, the data that is processed can be lost, damaged or infected by a virus, besides that the data is also not managed properly. good and when data is needed, the data will be difficult to find due to the large number of files piling up. With a decision support system using the web, it is hoped that it can help ease the burden on employees who manage recipients of aid for poor families which will be implemented at the BPMPK Office, Central Aceh Regency.

Stock investment is one of the most attractive forms of investment for investors. Investors can choose various sectors of companies listed on the Indonesia Stock Exchange (IDX) to place their funds in investing in shares. One of the sectors with high capitalization in recent years is the banking sector, where investors have been attracted to buying banking companies' shares. Even so, investors in investing in stocks must pay attention to the factors associated with the risk of investing in stocks, whether it is a total risk or a systematic risk that cannot be prevented by diversification. The purpose of this study is to empirically examine the effect of firm size, leverage, and profitability on stock risk. The sample used in this study is a banking company listed on the Indonesia Stock Exchange (BEI) and has stock beta data released by Pefindo during 2016-2019. Based on purposive sampling, 23 companies were selected so that the total sample is 92 observations. Hypothesis testing is performed using multiple linear regression analysis of panel data. The test results suggest that company size has a positive effect on systematic risk, but it negatively affects the total risk. Leverage is not associated with systematic risk and total risk.  Keywords: beta, leverage, banking industry, total risk, firm size

The textile and textile products (TPT) industry in Indonesia still has a lot of problems, one of which is the problem of raw materials which are considered to be unable to compete with the same material from importation sources. This requires the company continue to strive to increase productivity and cost efficiency to mitigate the increase in prices of raw materials charged to consumers. One effort that can be done by the company is to improve the efficiency of the cost of raw material inventory. The company must be able to plan and control the company's raw material inventory to support the effectiveness of its raw material costs. By having good planning and control, the company will avoid the problem of excess and lack of raw material inventory in carrying out production activities. This study aims to determine the application of the Justintime system at PT Bintang Baru Sentosa in increasing the efficiency of the company's raw material inventory costs. The type of research is quantitative qualitative research with a case study approach. Data sources obtained from primary data and secondary data. The methods used in this study include: interviews, observation, and documentation studies.The results of the study show that using Justintime in controlling raw material inventories has cost efficiencies of Rp18.418.185,- for 75/72 F DTY and 150/48 F DTY with a cost efficiency level of 75%.  Keyword:Raw Materials, Inventories, Just.intime (JIT), Cost Efficiency