Publication Search

Method is the most important element in the Islamic education learning process. Because methods are among the determining factors for the success or failure of education and learning. And it would be good if the learning methods were appropriate and relevant to the needs and conditions of students in the learning process. The output in Islamic education is the confirmation that students must have the ability to understand, believe and practice Islamic teachings as a concrete result of the learning process. And to make this happen, learning methods in Islamic education must be based on primary sources, namely the Koran and the Hadith of the Prophet SAW which have been tested for validity with current developments. Islamic education learning methods that can be applied according to the perspective of the Qur'an and Hadith include: the method of bil hikmah, example, stories, ibrah or mau'izah, habituation or habituation, parables, punishment and reward, lectures, discussions or dialogue and jidal or debate, question and answer, demonstration, and practice or repetition. In essence, the Qur'an or Hadith is a solution in the process of human life that must be studied and understood in order to achieve its essence in living human nature as a servant of Allah SWT.

Stunting is a condition of failure to thrive in children under five (for babies under five years of age) which is caused by chronic malnutrition so that the child is too short for his age. Stunting causes children to not reach their maximum height and disrupts brain development which will affect cognitive abilities. One in five children in Indonesia is reported to be stunted. The long-term impact of stunting will cause children to have difficulty receiving lessons, decreased learning achievement, decreased work productivity, low income and minimal participation in community activities. The cause of stunting in toddlers is often the result of many factors related to poverty, including poor diet, health, hygiene and the environment. The current effort being made is to provide education about high protein foods. The education provided aims to enable mothers of toddlers to play a role in providing a healthy, high-protein menu so that it can prevent the incidence of stunting. This community service is carried out with the aim of increasing the knowledge and understanding of mothers of toddlers regarding providing MP-ASI high in animal protein to prevent stunting. It is hoped that after participating in this service activity, mothers of toddlers will be able to provide MP-ASI high in animal protein for toddlers to support their children's height growth.      

The various building failures show that there are still many construction safety problems that are being ignored so that the Habibie library building construction project in Parepare City cannot be separated from these threats. Implementation of the Occupational Safety and Health Management System (SMK3) needs to be held to this construction project to prevent, reduce, and even strive to eliminate the risk of work accidents (zero accidents). The aim of this research is to analyze the level of success of the SMK3 and factors causing the delay of its implementation. This study using a descriptive method with qualitative approach through distributing questionnaires to 150 respondents which later be analyzed using SPSS program. The research results show that the success rate for implementing occupational safety and health is 74.20% and the most influential inhibiting factors are limited funds and also the lack of knowledge about SMK3 from the company and its employees.

PG Madukismo is a sugar factory that was established in 1955 and is the only sugar factory in the province of the Special Region of Yogyakarta. This factory is located in Padokan Village, Tirtonirmolo Village, Kasihan District, Bantul Regency, Special Region of Yogyakarta. PT Madubaru, a company engaged in sugar cane processing, is a sugar and spirits factory located in the Yogyakarta area. Companies that produce cane sugar with SHS IA quality. Product defects are often found, resulting in a decrease in quality, therefore it is necessary to carry out quality control. This study uses the Failure Mode and Effect Analysis (FMEA) method to identify failure modes, Logic Tree Analysis (LTA) to determine the consequences of failure arising from failure modes and determine effective preventive maintenance policies for each machine. For the production quality control section, the Statistical Processing Control (SPC) method is used to analyze product defects to determine whether product defects are still within controllable limits or not. While the Failure Mode and Effect Analysis (FMEA) method is used to determine the failure mode in sugar production. For the quality control section on raw materials using the Economic Order Quantity (EOQ), Re-Order Point (ROP), Safety Stock (SS), and Total Inventory Cost (TIC) methods. The conclusion of this study is regarding the results of the analysis and calculations carried out with several settlement methods and there are several causes of production defects from 5 factors, such as: human factors, work methods, environment, raw materials and machines used. And provide solutions to companies in order to reduce defects by controlling product quality.    

Chronic Kidney  Disease (CKD) is defined when kidney damage lasts more than 3 months. Chronic Kidney  Disease (CKD) is a disease with various causes in the form of structural or functional abnormalities, accompanied by a decrease in glomerular filtration rate (GFR). People with chronic kidney disease and kidney failure often require kidney replacement therapy or hemodialysis. Sleep disorders are one of the complications of hemodialysis and often occur in patients with chronic kidney disease and over a long period of time. This can affect the quality of sleep of people with chronic kidney disease, both in terms of quantity and duration of sleep, which ultimately affects the individual's daily function. Non-pharmacological methods such as aromatherapy are important to relieve, prevent or treat certain diseases using natural plant spices or aromatic essential oils. Lavender aromatherapy belongs to the Lamiaceae family and its scientific name is Lavandula angustifolia. Inhaling lavender oil is a simple method that has been proven to have a positive effect on various symptoms, especially in hemodialysis patients with sleep disorders.

Chronic kidney failure refers to the decline in kidney’s ability to maintain body fluid balance. Hemodialysis, as a kidney function replacement therapy, is needed to remove toxins and control electrolyte fluids in the body. One of the psychological impacts of hemodialysis is anxiety in patients. One way to reduce patient anxiety levels is by conducting murottal Al-Qur’an therapy. This study uses a case report method and was conducted in the Hemodialysis room of PKU Muhammadiyah Yogyakarta from May 2 to May 9, 2024. Two people with a diagnosis of chronic kidney failure were respondents in this study. The Hamilton Anxiety Rating Scale (HARS) was used as an instrument in this study, which was conducted before and after intervention. The results of the study showed that the respondents’ anxiety scores were in the moderate category (24 and 23) and changed to the mild category with a score of 14 after the application of therapy. This therapy has proven effective in reducing anxiety levels in patients with chronic kidney failure who are undergoing hemodialysis therapy.

The month of Ramadan is a special time for Muslims to worship, erase sins, and gain the rewards and pleasure of Allah SWT. Shaum or fasting, the primary worship during this month, involves abstaining from things that invalidate the fast. However, fasting is not intended to be difficult, as stated in the Qur'an, Surah Al-Baqarah: 185, which emphasizes ease rather than hardship in fasting. Besides its spiritual aspects, fasting also has health benefits, such as helping patients with obesity and heart disease. For patients with chronic kidney disease who require hemodialysis, fasting can be particularly challenging. Hemodialysis is a life-saving method that involves cleaning the blood outside the body. In Islam, there are principles of ushul fiqh that provide rukhsah or legal concessions for those who face difficulties in fulfilling religious obligations due to certain conditions. However, if a kidney failure patient insists on fasting despite having been granted rukhsah, this is known as azimah. This study aims to explore the status of azimah for hemodialysis patients who choose to fast from an Islamic perspective. Using a qualitative approach through literature review and in-depth interviews with fiqh experts, this research seeks to understand the legal implications and medical conditions involved. The results are expected to provide clearer insights into the practice of fasting for hemodialysis patients within the context of Islamic jurisprudence.

Chronic Kidney Failure (CKD) is a kidney disease caused by damage or dysfunction in the kidneys. A common problem in CKD sufferers is excess fluid which causes swelling in the extremities (edema). The causes of edema in CKD patients are failure to comply with fluid restrictions, lack of dietary control, fluid and sodium retention. One of the independent nursing interventions that is very effective for treating edema is ankle pump exercise therapy with leg elevation at 30 ̊. The case study was carried out in the hemodialysis unit at Dr. Tjitrowardojo Purworejo. The aim of the study was to identify the effect of providing ankle pump exercise therapy and 30° leg elevation intervention to reduce edema in CKD patients. The research design used is a descriptive method with a case study approach. The subjects of this case study are CKD patients undergoing hemodialysis who experience edema and patients who have signed an informed consent form. The instrument used is a monitoring sheet for the degree of edema. The intervention given in this case study was ankle pump exercise therapy and 30° leg elevation which was carried out for 7 minutes in 3 meetings over 7 days. Evaluation was carried out on days 1, 4, 8. The results showed that the degree of edema on the first day was grade III (5mm), on the second day it was grade II (4mm), on the third day it was grade I (2mm). Based on the results of the case study, it can be concluded that the application of ankle pump exercise and 30° elevation has proven effective in reducing the degree of edema in chronic kidney failure, so that this independent nursing intervention can be carried out by nurses for CKD patients undergoing hemodialysis.

Patients who experience Chronic Kidney Failure (CKD) require hemodialysis therapy. Fatigue is one of the effects of CKD and hemodialysis therapy. Fatigue occurs due to prolonged hemodialysis, anemia, uremic syndrome, and decreased blood pressure due to the effects of hemodialysis. One of the non-pharmacological therapies that can reduce fatigue in hemodialysis patients is foot massage therapy. This case study aims to determine the reduction in fatigue levels after carrying out foot massage therapy in CKD patients undergoing hemodialysis. This research design uses a case study to evaluate the implementation of nursing through foot massage therapy. The measuring tool used is the Functional Assessment Chronic Illness Therapy (FACIT) Fatigue Scale. This intervention was given at the 1st, 2nd, and 3rd hours for 10 minutes (starting at 51-60 minutes) for 3 days in the hospital hemodialysis unit and at home for 4 days for a total of 7 days. Evaluation of respondents' level of fatigue was carried out on days 1, 5, and 8. The results of this study showed that the fatigue level score after the intervention from days 1 to 7 decreased. The fatigue level score on day 1 was 15 (severe category), the score on day 5 was 21.66 (moderate category), and day 8 was 24.55 (moderate category). It can be concluded that foot massage therapy can reduce fatigue in CKD patients undergoing hemodialysis. The results of this research can be applied independently by nurses for CKD patients undergoing hemodialysis to reduce fatigue levels.

Chronic Kidney Failure (CKD) is a progressive and irreversible disease characterized by a decrease in the glomerular filtration rate (GFR). In this disease, uremia impairs the kidney's ability to maintain metabolism and water and electrolyte balance. Fatigue is one of the most common symptoms in patients undergoing hemodialysis which impacts quality of life. Progressive muscle relaxation is a type of non-pharmacological nursing intervention that can be used to treat fatigue in CKD patients undergoing hemodialysis. The aim of this research is to determine the application of progressive muscle relaxation therapy to fatigue in CKD patients undergoing hemodialysis therapy. The research design used is a case report. The instrument used to measure the level of fatigue is the Functional Assessment Chronic Illness Therapy (FACIT) fatigue scale. The intervention was carried out for ten to fifteen minutes over three days in the hospital hemodialysis unit and four days at the patient's home. Evaluation of respondents' level of fatigue was carried out on days 1, 5, and 8. The results of this study showed that the fatigue level score after intervention on day 1 was 16 (severe category), the score on day 5 was 20 (moderate category), and day 8 was 24 (moderate category). It can be concluded that progressive muscle relaxation therapy can reduce fatigue in CKD patients undergoing hemodialysis. The results of this research can be applied independently by nurses for CKD patients undergoing hemodialysis to reduce fatigue levels.

One of the characteristics of the oil and gas sector, especially drilling activities, is High Cost, namely high operational costs. Therefore, efficient and effective use of time is necessary to reduce operational costs. Evaluation of the influence of ILT and NPT on drilling activities was carried out to find the factors that made drilling time so long. Identifying KPIs for each activity is necessary to find out what activities can be optimized. From the analysis results it was found that the Invisible Lost Time value was 33.12% (198.75 hours) and Non-Productive Time was 18.37% (110.25 hours) caused by less than optimal performance and equipment failure. The author believes that the factors causing the relatively high ILT and NPT can still be optimized so that the costs required during drilling activities are in accordance with the desired planning.    

Congestive Heart Failure (CHF) is a condition where the heart function is disturbed and is unable to pump enough blood that causes the heart to not provide oxygen to meet the needs of the tissue so that the patient experiences shortness of breath or dyspnea. Objective: To implement a nursing intervention for providing a Semi-fowler position to increase the oxygen saturation on the Congestive Heart Failure patient with dyspnea. Method: This study was a case report (case report) with nursing intervention providing Semi-fowler position, was carried out for 3 times on different days. Results: The oxygen saturation before granted a semi-fowler position on the first and second observations were 94% then on the third observations were 95%. Later after 3 times provided a semi-fowler position, the oxygen saturation up to 98% at the first-time observation and 99% at the second and on the third observation. Conclusion: there is an increase in oxygen saturation on the Congestive Heart Failure patient with dyspnea after 2 times given a semi-fowler position on a different day.

Cases of Chronic Kidney Failure (CRF) every year increase, CRF is a progressive kidney function disorder and requires treatment in the form of kidney transplantation, peritoneal dialysis, hemodialysis and outpatient for a long time. Patients undergoing hemodialysis experience various problems arising from malfunctioning of the kidneys, affective coping mechanisms are needed in undergoing the treatment process. Objective: Identify coping mechanisms for chronic renal failure patients in the hemodialysis unit of NTB Provincial Hospital. Research method: descriptive research using a cross sectional approach.  The sample in this study was 69 respondents, data collection method using Jalowiec Coping Scale questionnaire. Results: most respondents used maladaptive coping, which was 37 people (53.6%). Conclusion: still a large percentage of patients in the maladaptive category so that appropriate interventions are needed to improve the coping of individual CRF patients.

Cases of Chronic Kidney Failure (CRF) every year increase, CRF is a progressive kidney function disorder and requires treatment in the form of kidney transplantation, peritoneal dialysis, hemodialysis and outpatient for a long time. Patients undergoing hemodialysis experience various problems arising from malfunctioning of the kidneys, affective coping mechanisms are needed in undergoing the treatment process. Objective: Identify coping mechanisms for chronic renal failure patients in the hemodialysis unit of NTB Provincial Hospital. Research method: descriptive research using a cross sectional approach.  The sample in this study was 69 respondents, data collection method using Jalowiec Coping Scale questionnaire. Results: most respondents used maladaptive coping, which was 37 people (53.6%). Conclusion: still a large percentage of patients in the maladaptive category so that appropriate interventions are needed to improve the coping of individual CRF patients.

The instability of the economy and increasingly sharp competition in the industry requires a company to further enhance the efficiency of its operations. Treatment method that has been used is still corrective maintenance where engine maintenance activities undertaken to improve and enhance the condition of the engine so as to achieve the standards set at the level tersebut.Besarnya machine downtime which reaches up to 40% each month. Due to the growing number of downtime that occurs it will be increasingly detrimental to the productivity of a company. In this study used methods Realibility Centered Maintenance abbreviated to (RCM), which is to determine the optimal engine maintenance activities for the company. Reliability Centered Maintenance (RCM) is an approach that combines maintenance practices and strategies of preventive maintenance (PM) and corrective maintenance (cm) to maximize the life (life time) and the function of assets / systems / equipment at a minimal cost. Subjects studied machine is the machine Injection Molding, where the focus of engine components that will be examined as many as six parts: Barrel, Piston Injection, Toggle Clamping, Nozzle, Hydro Motor, Hopper. As for the category based on time (TD), the treatment provided in the form of component replacement schedule. Category finding damage (FF) recommended replacement components if the level of damage exceeds tolerable limits. Failure of components that include safety problem 13:33%, Outage System 80.00%, 6.67% Economic System. Of the total minimum downtime obtained Screw interval of 30 days, the crosshead link 11 days, Seal 13-day, 12-day screening. Downtime Screw impairment 37.21%, 41.15% crosshead link, Seal 24.56%, and 29.32% Screening

Body image disturbance is one of the problems that chronic kidney failure patients undergoing hemodialysis will experience due to changes in the function of the patient's body structure due to the effects of hemodialysis. Patients also feel embarrassed in front of their families and society due to the physical changes they experience. The quality of life of patients with chronic kidney failure is often disturbed. The aim of this research is the relationship between body image and motivation and the quality of life of chronic kidney failure patients undergoing hemodialysis therapy at the Esa Pemuda Clinic in 2023. The research method that will be used is an analytical research design with a correlational design. cross-sectional approach, a population of 94 respondents using proportional stratified random sampling technique and a sample size of 48 respondents. Using the non-parametric Rank Spearman Ro test. The results are 5. There is a relationship between body image and the quality of life of chronic kidney failure patients undergoing hemodialysis therapy at the Esa Pemuda Clinic, p-value 0.000 < 0.05 and there is a relationship between motivation and the quality of life of chronic kidney failure patients undergoing hemodialysis therapy at the Esa Pemuda Clinic 0.000 < 0.05. Conclusion: Body image and motivation can influence the quality of life of patients undergoing hemodialysis at the Esa Pemuda Clinic.    

The viral phenomenon of local genius YouTuber Pak Ndul from Bojonegoro is interesting to study, since this research has never been studied before. The article intends to examine Islamic education from the viral phenomenon of YouTuber Pak Ndul: local genius, expert and essentially the core of Bojonegoro, using a phenomenological method, a qualitative approach, and descriptive analysis. The research results concluded; that creativity in packaging language is very important in order to attract other people. This also applies in Islamic education, that the delivery of material must be packaged as attractively as possible in order to convey the learning objectives. A spirit of curiosity must be put forward in order to overcome failure, which gives birth to a spirit of always learning in order to improve one's abilities. A deep religious understanding implies that religion requires a child to be filial to his parents. Research implications: the importance of hard work based on religious values. The study challenges other researchers to research further with a specific and in-depth scope.

The purpose of writing this article is to determine the development of education quality in developing countries. This research uses a type of library research. Library research is research carried out by reviewing various journals and related reference books. The results of his research show that quality education is education that can produce students who have abilities, insight and skills in accordance with established standards, so that they have sufficient opportunities to be competent in any job market without ignoring the moral aspects of their lives. A developing country is a country with a low average income, relatively underdeveloped infrastructure, and a human development index that is poor compared to global norms. Educational policies in developing countries generally originate from the legacy of colonial educational policies. It is said this because developing countries when they first became independent had not yet developed their own educational policies based on the realistic needs of their people. The independence that has been achieved in the political field is not automatically followed by independence in other fields, especially in the field of education. The causes of the low quality of education in developing countries are, 1) lack of qualified teachers, 2) failure of schools to care for students, in fact elementary schools are less effective in supporting the development movement, if the impact is not proven within an appropriate period of time, 3) poor state of the curriculum. not appropriate. The basic problems of the curriculum at the pre-university level include the expansion of cultural adaptation, localization and vocationalization of the curriculum, 4) Inequality in rural and urban progress.

This study presents an advanced structural health monitoring (SHM) system for steel bridges based on wireless sensor networks (WSN) integrated with machine learning algorithms. The proposed system monitors and predicts structural integrity under various load conditions. The research focuses on developing a machine learning model capable of real-time anomaly detection, allowing for early warnings of potential failures. Experimental results from both simulation and field tests demonstrate the system’s effectiveness in prolonging bridge lifespan while reducing maintenance costs.

The rapid evolution of smart cities, driven by the integration of technologies such as the Internet of Things (IoT) and blockchain, has brought about significant advancements in urban infrastructure and services. However, these developments also introduce new cybersecurity challenges. Introduction: Smart cities are increasingly vulnerable to cyber threats due to the extensive use of interconnected devices and systems. A key security concern is the management of digital identities, which is essential for maintaining the integrity and reliability of city services. Literature Review: Traditional centralized identity management systems face significant security issues, including a single point of failure, data breaches, and limited user control over personal information. In contrast, decentralized solutions, particularly blockchain-based systems, offer enhanced security through their distributed nature, eliminating vulnerabilities associated with centralized models. Materials and Method: This research focuses on blockchain technology’s application in smart city identity management. A decentralized framework is proposed, leveraging cryptographic techniques, consensus mechanisms, and smart contracts to ensure data security, integrity, and privacy. Results and Discussion: The implementation of blockchain for identity management significantly improves attack tolerance, data integrity, and transparency. The decentralized approach mitigates the risks associated with central authorities, ensuring that user data remains secure and verifiable. However, scalability, interoperability, and regulatory compliance challenges remain. Blockchain solutions must be optimized for large-scale smart city applications and aligned with legal standards to achieve widespread adoption. Future research should focus on overcoming these challenges to create a more secure and resilient smart city infrastructure.