Evaluasi Invisible Lost Time dan Non-Productive Time Pada Sumur X Menggunakan Data End Of Well

Edy Soesanto ; Assyeh Annassrul Majid
Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan I... 📅 2024 Vol 2, No 2 🔗 DOI: 10.61132/manufaktur.v2i2.332
Abstract
One of the characteristics of the oil and gas sector, especially drilling activities, is High Cost, namely high operational costs. Therefore, efficient and effective use of time is necessary to reduce operational costs. Evaluation of the influence of ILT and NPT on drilling activities was carried out to find the factors that made drilling time so long. Identifying KPIs for each activity is necessary to find out what activities can be optimized. From the analysis results it was found that the Invisible Lost Time value was 33.12% (198.75 hours) and Non-Productive Time was 18.37% (110.25 hours) caused by less than optimal performance and equipment failure. The author believes that the factors causing the relatively high ILT and NPT can still be optimized so that the costs required during drilling activities are in accordance with the desired planning.
 
 
Keywords
ILT (Invisible Lost Time); NPT (Non-Productive Time); Drilling
How to Cite

Edy Soesanto & Assyeh Annassrul Majid (2024). Evaluasi Invisible Lost Time dan Non-Productive Time Pada Sumur X Menggunakan Data End Of Well. Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri, 2(2). https://doi.org/10.61132/manufaktur.v2i2.332

Edy Soesanto; Assyeh Annassrul Majid, "Evaluasi Invisible Lost Time dan Non-Productive Time Pada Sumur X Menggunakan Data End Of Well," Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri, vol. 2, no. 2, 2024.

Edy Soesanto; Assyeh Annassrul Majid. "Evaluasi Invisible Lost Time dan Non-Productive Time Pada Sumur X Menggunakan Data End Of Well." Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri, vol. 2, no. 2, 2024.

Edy Soesanto; Assyeh Annassrul Majid. "Evaluasi Invisible Lost Time dan Non-Productive Time Pada Sumur X Menggunakan Data End Of Well." Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri 2, no. 2 (2024).

Edy Soesanto & Assyeh Annassrul Majid (2024) 'Evaluasi Invisible Lost Time dan Non-Productive Time Pada Sumur X Menggunakan Data End Of Well', Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri, 2(2). doi: 10.61132/manufaktur.v2i2.332.

Edy Soesanto; Assyeh Annassrul Majid. Evaluasi Invisible Lost Time dan Non-Productive Time Pada Sumur X Menggunakan Data End Of Well. Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri. 2024;2(2).

Artikel Terkait

Implementasi Forecasting Maintenance dalam Pengelolaan Perawatan Dump Truck pada Operasi Pertambangan

Mad Yusup; Diyaa Aaisyah Salmaa Putri Atmaja; Purbawati Purbawati; Ida Rosanti; Tommy Mohammad Chadiq; Mailina Ihya Nashafiyah

Analysis of Hexagonal Head Bolt Production of M10 × 100 mm at a Capacity of 500 Units/Hour

Muhammad Afaq Ahmad Khan; Syamsul Hadi; Ramadhani Rafi Rasheesa; Sulaiman Sulaiman

Perencanaan Penggantian Komponen Generator Listrik Daya 2,5 kW

Reza Nandhika Putra Wijaya; Syamsul Hadi; Mochammad Reza Maulana Ramadhon; Bintang Erlangga; Yohan Nur Azizi; Hallan Shandria Rifqi

Perencanaan Penggantian dan Perbaikan Komponen Mesin Die Casting Kapasitas 40 Unit/Jam dengan Metode IRRO

Muhammad Yusuf Prayitno; Syamsul Hadi; Bagus Prakoso; David Avelino Anugerah Krishna Pamungkas; Ahmad Zulfa Sibro Malisi

Centrifugal Pump Maintenance Planning with a Capacity of 650 Liters/Minute for 2026

Adesta Dermawan Wicaksono; Syamsul Hadi; Asset Cahya Wardhana; Ajang Deng Arok; Atem Juacg Kelei Juach

Pengaruh Implementasi Teknologi Rekayasa Industri terhadap Peningkatan Kapabilitas SDM di Sektor Produksi

Abrar Guntar Damanik; Rendy Purwanto; Rafly Zam Zami Anwar; Abdurrozaq Hasibuan
Tren Sitasi Jurnal