This study explores the strategic integration of Environmental, Social, and Governance (ESG) and Good Corporate Governance (GCG) as a means to support the achievement of the Sustainable Development Goals (SDGs). Using a qualitative descriptive method through content analysis of secondary data, the research analyzes the relevance of ESG and GCG in corporate strategy. The findings show that ESG provides a framework for identifying sustainability-related risks and opportunities, while GCG ensures ethical, transparent, and accountable governance. Companies integrating these two pillars demonstrate better performance in sustainability, increased competitiveness, and greater investor trust. Case studies from Indonesian companies such as PT SUCOFINDO and PT Len Industri illustrate successful ESG-GCG implementation that aligns with various SDG targets. Nonetheless, challenges remain, including resource constraints and limited managerial awareness. The study concludes that the synergy between ESG and GCG is essential in building resilient and sustainable businesses. Further research is recommended to develop implementation models across industries and support policy improvements in ESG governance.

In the Kutai Basin area, seasonal changes such as high rainfall can significantly increase groundwater content, so that the effect of water content on the shear strength of claystone, increasing water content in rocks tends to decrease shear strength. Water in the pores or fractures can increase pore water pressure and reduce effective normal stress. Shear strength is one of the most important mechanical parameters used to assess soil and rock stability, this parameter is very important in slope stability analysis, foundation planning, and various civil engineering and mining applications. Therefore, this study was conducted to determine whether the water content in rocks can affect the strength of rocks in receiving shear forces. The method used in this study is more quantitative and specific to the effect of water content on the shear strength of claystone in this area. Increasing water content in rocks tends to reduce shear strength. This study was conducted by taking claystone samples from several locations in the Kutai Basin. Data collection in the form of primary data and secondary data for testing physical properties and testing mechanical properties, in testing physical properties, the water content value will be taken as supporting data which is one of the factors that affect rock strength, in testing mechanical properties, claystone shear strength data will be taken. From the results of the physical properties test calculations, the air content in each Formation is obtained, namely, in the Kampungbaru Formation the minimum air content value is 15.54% and the maximum is 20.17%, in the Balikpapan Formation the minimum air content value is 10.21% and the maximum is 12,88%, in the Palaubalang Formation the minimum air content value is 10.49% and the maximum is 22.87%. The results of the strength of the claystone in receiving shear forces in the Kutai Basin are the Muara Jawa location 0.486MPa, Tanah Datar location 0.500 MPa, Sanga-sanga location 0.333 MPa, Muara Badak location 0.269, Air Putih location 0.711MPa, Mugirejo location 0.021 MPa and Lempake location 0.092 MPa.

Durability is defined as a measure of a rock's resistance to weathering and disintegration when the rock undergoes weathering processes over a short period of time. The susceptibility of rocks to disintegration is related to their low durability. Rock durability is often measured using the slake durability test. The slake durability test is widely used to assess physical changes resulting from wetting-drying processes (Franklin and Chandra, 1972). Therefore, slake durability testing is conducted to understand the weathering of rocks caused by heat and water, particularly clay stones which are one of the constituent rocks on a slope. The sampling location is around Sanga-sanga and Muara Badak. Sampling was conducted with coordinate points and the Balikpapan and Kampungbaru formations. The claystone samples taken were then brought to the Mineral and Coal Technology Laboratory of the Engineering Faculty of Mulawarman University for Slake Durability tests. In this study, the lowest index value obtained was 45.7% and the highest value was 93%, indicating high to very high durability. The difference in the durability index values of claystone at the research locations indicates the presence of variables that can affect the slake durability index values of the claystone in the Balikpapan and Kampungbaru formations, including grain size and mineral content as well as geological conditions at the research site. Based on the results of the claystone durability tests, the durability index value (Id2) was obtained, indicating that the sandstone at the research location falls into the classification of high to low.

Compressive strength is one of the mechanical properties of rock behavior. This study focuses on the Balikpapan and Kampungbaru Formations located in the Kutai Kartanegara area, East Kalimantan. The Schmidt Hammer testing method was applied due to the lack of previous studies utilizing this tool to evaluate rock hardness in correlation with compressive strength. The research site is situated in the Kutai Kartanegara area, specifically in the districts of Muara Badak, Muara Jawa, and Sanga-Sanga. Field observations revealed the presence of claystone slopes at predetermined locations. Based on the test results, the uniaxial compressive strength (UCS) values for the Balikpapan Formation range from 3.453 MPa to 5.454 MPa, while the Kampungbaru Formation ranges from 3.317 MPa to 8.571 MPa. The Schmidt Hammer rebound number (RN) values for the Balikpapan Formation range from 17 to 19.6, and for the Kampungbaru Formation from 15 to 23.7. A negative correlation was found between the rebound number and UCS, where higher RN values tend to correspond with lower UCS values. This is supported by the linear regression analysis showing a negative coefficient (-0.450).
 

Disposal area is an area at an open pit mine that is used as a place to store or dispose of worthless materials. Disposal must also follow the specified safety factor standards, if the disposal design is not safe after being analyzed by a geotechnical engineer, the design must be redesigned to achieve the desired safety factor value. One way to increase the fk value is to make a Counterweight plan in making disposal. Where Counterweight is a fill material that is made with special treatment so that the soil bearing capacity increases which functions to withstand the load on it. Landslides on disposal slopes are one of the serious problems faced in mining activities, especially in areas with vulnerable geological and topographic conditions. PT Jembayan Muarabara, which operates in Marangkayu District, Kutai Kartanegara Regency, East Kalimantan Province, is no exception to this challenge. The A–A’ cross section shows a safety factor value of 1.118 in saturated conditions, which indicates that the slope is at a stable limit and needs to be improved through engineering such as adding counterweights. The B–B’ cross-section has a safety factor value of 2.332, which is included in the safe category and has met the provisions of the ESDM Ministerial Decree No. 1827 K/30/MEM/2018. The C-C’ cross-section has a safety factor value of 1.511, which is included in the safe category and has met the provisions of the ESDM Ministerial Decree No. 1827 K/30/MEM/2018.

The mining system applied by PT Bukit Baiduri Energi is an open pit mining system utilizing the open-pit method. The application of the open-pit method creates a depression that has a high potential to become a catchment area for both surface runoff and groundwater. In the mining pit of PT Bukit Baiduri Energi, there is a sump located at an elevation of -86 meters above sea level (mdpl). The planned mining boundary is at an elevation of -110 mdpl. Therefore, this research aims to determine the area of the catchment, runoff discharge values, sump capacity, and pump capacity, so that the volume of incoming water can be known, allowing for the control of the sump to prevent overflow that could disrupt mining activities.. Based on the data obtained and the calculations performed, the catchment area was found to be 103.42 ha. In the calculation of runoff discharge using the rational method, the total runoff discharge entering sump A9 was found to be 4,211.66 m3/day. The capacity of the sump was measured at 125,187.62 m3. In the pump capacity calculation, the pump capacity based on the pumping discharge was found to be 2,926.80 m3/day.

The implementation of coal mining activities with an open pit system at the end of its activities will leave behind the remains of former mining holes. Control of acid mine water is something that needs to be done during mining activities until the end of the mining process because acid mine water can cause a decrease in the quality of surface water and groundwater and have an impact on the survival of humans and biota that live on land and water. The initial characteristics of water using the floating treatment method of wetland, the pH, TSS, Fe, and Mn values ??of ex-mining lake water do not meet the quality standards of the Government Regulation of the Republic of Indonesia Number 22 of 2021. The ability of water hyacinth plants to increase pH for 25 days is quite good with an initial pH value of 4.13 to 7.34. For 25 days, the TSS parameter of water hyacinth plants is also good at reducing TSS levels with an initial value of 6 mg/L to 3 mg/L, the Fe parameter of water hyacinth plants is also good at reducing iron levels with an initial value of 1.06 mg/L to 0.34 mg/L, while the Mn parameter of water hyacinth plants is quite good at reducing manganese levels with an initial value of 1.13 mg/L to 0.32 mg/L.

This study aims to determine the influence of Ownership Structure, Capital Structure,   Good   Corporate   Governance   and   Company   Size   on   Company Financial Performance in Energy Sector companies listed on the Indonesia stock exchange for the period 2019-2023. The variables used in this study, the independent variable (X) consists of Ownership Structure proxied by Institutional Ownership (KI), Capital Structure proxied by Debt to Equity Ratio (DER), Good Corporate Governance proxied by Independent Board of Commisioners (DKI) and Company Size by Ln (TA) and the dependent variable (Y) is Financial Permormance proxied by Return on Assets (ROA). The sample in this study was obtained using the purposive side method.Based on the criteria and data processing process that  were set, 25 companies  were determined as research samples. The data analysis technique used was multiple linear regression. The results of this study state that the influence between ownership structuree, capital structutre, good corporate governance, and company size has a  simultaneous effect on the financial performance of the Energy sector listed on the Indonesia Stock Exchange (IDX).

Classroom management skills are one of the fundamental competencies in teaching aimed at creating and maintaining an optimal learning environment. In other words, this skill is closely related to the professional abilities of teachers to produce favorable conditions, provide enjoyment for learners, and foster a healthy learning discipline. This study aims to understand how classroom management is implemented at Private High School Utama Medan located in Medan Tembung District, Medan City. The method used in this research is qualitative descriptive. Several issues that arise in classroom management at Private High School Utama Medan include: students seeking attention, emotional students, students facing learning difficulties, students who struggle to cooperate with their group mates, groups that violate regulations, a lack of adequate learning media, and a classroom atmosphere that is not supportive.

Character education is one of the essential elements that must be systematically integrated into every aspect of higher education implementation, including the management of human resources (HR), which serves as a key pillar in the execution of education. This study aims to identify and analyze how character-oriented human resource management is implemented at Universitas Linggabuana PGRI Sukabumi. The research method used is qualitative descriptive, with data collection techniques including interviews, observations, and documentation. The results of the study show that HR management strategies are carried out through value-based staff selection, character training, integration of character values into the curriculum, and performance evaluations that emphasize integrity and work ethics. This approach fosters an organizational culture that continuously supports the development of student character. The implications of these findings indicate that HR management integrated with character education can strengthen the university’s mission to produce graduates who are not only competent but also morally grounded. This research provides an important contribution to the development of value-based HR management models and serves as a reference for higher education policies focused on character formation.