Publication Search

The development of information and communication technology in the current digital era is growing very rapidly and affects many aspects of human life, including aspects of children's education. The influence of these technological developments also brings changes to modern lifestyles that have both positive and negative impacts on all levels of society, including the lives of children. The COVID-19 pandemic that has occurred since 2020 also affected the life of the education world, namely changing learning methods of the teaching and learning process in schools. The online learning method is starting to be applied for schools that are ready with this online learning system, which requires a lot of media, such as cellphones, laptops, computers and of course the availability of a good internet network. This government policy came into effect in several provinces in Indonesia on Monday, March 16, 2020, which was also followed by other provincial areas. The changing era and the influence of the development of technology and information can affect children's lives. These are a challenge for a teacher because the teacher's role is very important in the child's education process. This role can be interpreted as individual behavior that is important for the social structure of society. While facing all challenges, the teacher has important role to instill the right character values for students to anticipate all negative influences that can be caused and affect their lives, especially for PAK teachers in carrying out their main duties.

Security Parking UIN Walisongo Semarang at this time can be said to be in poor condition. The high case of loss of a motor vehicle cause anxiety for the academic community. Parking system that is traditional that is doing the checking of identity cards at the exit of the campus is less effective. Hence the need for a system of security parking modern and computerized, so that activities out of the vehicle can be recorded and stored automatically. Based on these problems, the authors designed a parking Security System as a WEB-based form of increased security parking campus UIN Walisongo Semarang. By using RFID technology (Radio Frequency Identification) are planted on the card identity, which can later be used as an authentication tool typing will enter and exit the campus area. To provide double security, there are Features of the Live Camera with the base website that serves as a tool for monitoring vehicles that are parked in real time. The output of this final project is to produce a prototype security system parking. Not only specialized hardware, but also software design of the System monitoring of vehicles in live Web-based. So the users of the parking facilities can monitor the vehicle anywhere.  

  Fixed assets are tangible assets that are owned for use in the production or supply of goods or services, for rent to other parties, or for administrative purposes and are expected to be used for more than one period. Due to its high value, relatively long use and being the company's main tool to generate revenue, investment in fixed assets (Capital Budgeting) must be carefully calculated. In addition, depreciation or depreciation is the allocation of the cost of a fixed asset which is the effect of the decline in the value of the fixed asset. The reason why many companies apply the straight line method of depreciation (Straight Line Method) is because there are relatively stable maintenance and repair costs in each period, and the costs are not affected by productivity or are not affected by deviations. Therefore, the assets owned must continue to be managed properly so that companies and individuals can benefit from the existence of these assets, especially fixed assets. But this is not the case with KSP Mandiri Sejahtera Semarang where fixed assets have not been well managed. This results in inconsistencies and calculation errors, incomplete data, which results in inappropriate decision making and the value of the company's fixed assets has not been recorded properly and accurately. With a new structured management system where the calculation and reporting of depreciation of fixed assets using the straight-line depreciation method helps the calculation of depreciation of fixed assets owned by the company, besides that it also provides information about the detailed condition of each fixed asset owned by the company so that it helps the company manage its fixed assets , as well as helping to present accurate and accurate reports for the benefit of the company's internal financial reports and taxation.

Earth, water and space as well as the natural resources contained therein under the control of the State are gifts from God Almighty whose functions and uses are for the prosperity of the people. Land for the Indonesian Nation is a source of livelihood and is regulated in the provisions of the Law. The Basic Agrarian Law No. 5 of 1990 lays the foundation on providing legal certainty for land rights for the Indonesian people. Legal certainty is obtained after the land registration process. Land rights that have legal certainty can be transferred or transferred. however, in the process, disputes over land rights still occur in the community. Blocking of Land Rights Certificates is taken as an administrative step in the dispute resolution process, but there is a period of only 30 days to record the blocking of Peru, it is known how the factors of land blocking, how to know the position of the holder of the Land Rights certificate when the block is being blocked and when the period is 30 blocking day is over but the dispute has not been resolved. The type of research used by the writer is juridical normative and descriptive analytical research specification by collecting data by means of literature study and interviews which are presented in a descriptive manner and analyzed in a descriptive qualitative manner. The results of the research and data analysis carried out show the factors that cause the blocking of Land Rights Certificates, namely: a. Gono-Gini distribution of assets, b. Land Rights Holders do not have good faith, c. Distribution of Inheritance, d. Lost Certificate, e. There is an investigation by the Police, f. Land rights confiscated by the State Receivables Affairs Committee (PUPN) in connection with the settlement of State Receivables. Legal protection & the position of the Land Rights Certificate Holder when the blockage is carried out is that the right holder cannot take legal action against the blocked land for 30 days after the block registration was carried out, article 19 UUUPA / PP 241997 regarding registration will not be lost The legal certainty of the rights holder remains attached to it as long as there has been no transfer of rights to the land they own. If the 30 day period of blocking is over but the dispute has not been completed, the blocking will not be removed by law and will remain in effect as long as there is no request for revocation by the applicant or the provisions -Other provisions which become the reasons for the removal of the block in accordance with article 14 of the Regulation of the Minister of ATR / Head of the National Land Agency No.13 of 2017 concerning the Procedure for Blocking and Confiscation, this is because in the Land Office (Semarang) there is no system that can identify or filter out expired blocks.   Keywords: Land Registration, Legal Certainty, Rightsholders, Blocking of Land Rights Certificates, Position of Rightsholders

Dian Wacana Demak Christian Kindergarten-Kindergarten School, which is one of the agencies engaged in the science and early childhood education. The type of data used is qualitative and quantitative data. The research objective is to design an effective and efficient school financial administration recording information system and design a school financial administration recording information system that has a system security that can maintain the correctness of the data. The research method used is the Borg and Gall R&D Development Research model, the Prototyping System Development Method to produce a product in the form of a prototype with 6 stages: Research and Data Collection, Planning, Initial Product Development, Product Testing, Product Revision, Final Trial. The conclusion from the results of this study is that this system can facilitate the recording of cash in and cash out transactions so that there are no mistakes in recording, users can easily present cash reports more quickly so that they can minimize recording time and recording errors, and make it easier for users to print. cash reports with accurate results so as to support and speed up decision making.

Oil palm is Indonesia's leading and prime plantation commodity. Plants whose main products consist of palm oil (CPO) and palm kernel oil (KPO) have high economic value and are one of the largest foreign exchange earners compared to other plantation commodities (Fauzi, 2012) PT. Safety Pin River Purun is a company that manages palm kernel products with the products produced there are 2 types, namely CPKO (Cruide Palm Kernel Oil) and PKM (Palm Kernel Meal). From the results of the study it was found that the prototype design was made capable of producing palm kernel assessment calculations using AHP in the assessment process, while the prototype model used was to use the prototyping model method. With this research can be beneficial for the management of PT. The Sungai Purun pin in the process of evaluating palm kernel is more effective and accurate in producing reports

Stock investment is one of the most attractive forms of investment for investors. Investors can choose various sectors of companies listed on the Indonesia Stock Exchange (IDX) to place their funds in investing in shares. One of the sectors with high capitalization in recent years is the banking sector, where investors have been attracted to buying banking companies' shares. Even so, investors in investing in stocks must pay attention to the factors associated with the risk of investing in stocks, whether it is a total risk or a systematic risk that cannot be prevented by diversification. The purpose of this study is to empirically examine the effect of firm size, leverage, and profitability on stock risk. The sample used in this study is a banking company listed on the Indonesia Stock Exchange (BEI) and has stock beta data released by Pefindo during 2016-2019. Based on purposive sampling, 23 companies were selected so that the total sample is 92 observations. Hypothesis testing is performed using multiple linear regression analysis of panel data. The test results suggest that company size has a positive effect on systematic risk, but it negatively affects the total risk. Leverage is not associated with systematic risk and total risk.  Keywords: beta, leverage, banking industry, total risk, firm size

The textile and textile products (TPT) industry in Indonesia still has a lot of problems, one of which is the problem of raw materials which are considered to be unable to compete with the same material from importation sources. This requires the company continue to strive to increase productivity and cost efficiency to mitigate the increase in prices of raw materials charged to consumers. One effort that can be done by the company is to improve the efficiency of the cost of raw material inventory. The company must be able to plan and control the company's raw material inventory to support the effectiveness of its raw material costs. By having good planning and control, the company will avoid the problem of excess and lack of raw material inventory in carrying out production activities. This study aims to determine the application of the Justintime system at PT Bintang Baru Sentosa in increasing the efficiency of the company's raw material inventory costs. The type of research is quantitative qualitative research with a case study approach. Data sources obtained from primary data and secondary data. The methods used in this study include: interviews, observation, and documentation studies.The results of the study show that using Justintime in controlling raw material inventories has cost efficiencies of Rp18.418.185,- for 75/72 F DTY and 150/48 F DTY with a cost efficiency level of 75%.  Keyword:Raw Materials, Inventories, Just.intime (JIT), Cost Efficiency

The management of production and operations in factory machinery is an optimal management effort in the use of resources consisting of labor, machinery, equipment and raw materials. The production and operations manager directs various inputs in order to produce various outputs or results in units of quantity, quality, price, specific time and location according to consumer demand. Efficiency and effectiveness of the production process to be achieved requires proper scheduling management so that the production output produced can be completed according to target. Management of production and customer orders is still simple, besides that the status of raw material inventories that cannot be directly known can often result in delays in the production process and even production cannot be done as soon as possible. Scheduling orders that enter using the system first in first out where the first order that comes is done, but has not considered the number of orders, priority of customers, maturity of workmanship and engine capacity so that the estimated completion of the order can not be known. To make it more efficient and directed, the Earliest Due Date method is used by sorting the production work based on the closest due date. This method can be used for scheduling on one machine or for scheduling on several machines (parallel machine) so that the scheduling management information system can manage effective production scheduling and produce production reports automatically as needed.

Improvement of Textile Industry system design with Six Sigma and FMEA to improve process quality. Six Sigma is a method of continuous quality improvement, by minimizing the number of defects. FMEA (Failure Mode Effect Analysis) tool is used to help determine the appropriate action, eliminating priority failure modes. The next step to improve to determine the most influential factor to the occurrence of color defects, so that the influence of the interference factor is minimum. If the control function is carried out and the factors causing the defect do not appear again there will be an increase in sigma value. FMEA analysis results obtained by machine temperature and material factors that most influence the occurrence of color defects, with RPN values of 210 and 120 respectively, the Six Sigma calculation results an increase in sigma value from initial conditions of 3.78 sigma to 4.93 sigma, or an increase in process capability of 1.15 sigma. Proposed improvements with DOE so that color defects do not appear are suggested by setting the thermosol engine temperature control device and mixing the optimized NaCl. Keyword : Six Sigma, FMEA, DOE

The purpose of this study was to analyze the effect of management information systems on the work effectiveness of outpatients at the Prof.Dr.H.M Anwar Makkatutu Regional General Hospital, Bantaeng Regency. The type of research used is quantitative research. This research method uses primary data through a survey using a questionnaire as many as 73 outpatient employees of the Regional General Hospital Prof.Dr.H.M Anwar Makkatutu Bantaeng as the research sample. Data were analyzed through univariate and bivariate analysis with Chi-Square test using SPSS program. The results showed that: (1) The quality of the system showed a value of p = 0.001 < from = 0.05, which means it can be concluded that Ho is rejected, meaning that the system user has an effect on the work effectiveness of outpatients at Prof. Hospital. Dr. H. M. Anwar Makkatutu 2020, (2) The quality of information affects the work effectiveness of employees with a p value = 0.000, (3) System users affect the work effectiveness of outpatients with a p value = 0.000, (4) User satisfaction affects the work effectiveness of outpatients path with p value = 0.000. This shows that the quality of the management information system can increase the work effectiveness of outpatient employees at Prof. Hospital. Dr. H. M. Anwar Makkatutu Bantaeng. If the management information system is good, it will increase the work effectiveness of outpatients and increase employee satisfaction.

Facing the challenges of an increasingly developing era, changes will continue to occur in all aspects of life, including one in the world of education. A study needs to be conducted to anticipate increasingly rapid developments, both in Christian and secular theological education. The influence of the challenges of the era will create positive and negative changes, for that it is necessary to conduct an investigation in a study. This study was conducted to investigate the influence of technology-based training on improving professional skills in the field of Christian theology. Integrating the influence of technology-based training in Christian theological education can be an effective strategy for developing relevant and competitive professional skills. Professional skills in the field of Christian theology are an important component for the development of Christian theological education and spiritual understanding of Christian theology. This study is expected to contribute to the development of effective curriculum programs in theological education in the future. The research method used is qualitative with an interview system and questionnaires for training participants. This study shows that the influence of formal technology-based training plays an important role in improving professional skills in the field of Christian theology.  

Kaliwungu Dream Building Shop is a business engaged in the sale of building materials and building-producing tools. This trading business sells various materials and tools for building buildings such as sand, cement, nails, paint, hammers and so on. The Dream Building Shop was founded by Mr. Zaenal, whose address is Jalan Raya Sekopek No. 10 Sarirejo Kaliwungu, Kendal Regency. Kaliwungu Dream Building Shop in recording sales transactions, purchases and reports - reports still use the manual method by writing them into a book, this method still requires time which is relatively old and prone to calculation errors, as a result you have to work 2 times or even many times to recalculate transactions that occur. Factors that are generally controlled are human errors that occur in cooking data and storing & maintaining paper-shaped documents, where this is very difficult to overcome. In addition, the process of searching for data or inventory is also less effective and efficient. also affect customers, even though performance according to the store is needed to satisfy customers.

This study aims to produce an Islamic learning module integrated with reproductive system material that has valid, practical and effective criteria so that the module can be used in learning and can improve student learning outcomes. This research uses the Research & Development method and is developed using the ADDIE model with Analyze stages, namely requirements analysis, Design which is the design / draft module, Development which is product development based on material validation, design validation, Islamic validation, small-scale trials, module revisions, Implementation ie the application of modules in large-scale trials of experimental classes (learning using modules), Evaluate is the final module. The results of this study indicate that the modules developed are suitable for use in learning science reproductive system material obtained from the validity value of the material experts obtained from the value of 86.03% with valid criteria, design experts 82.44% valid, Islamic experts 85.52% valid. The practicality of using modules was obtained from observations of learning accomplishments of 98.65% with very successful criteria and the questionnaire responses of students showed a value with a percentage of 91.47% with the practical module category used. The effectiveness of the use of modules is obtained from an increase in student learning outcomes with N-Gain of 0.82 in the high category compared to the control class of an N-Gain value of 0.29 with a low category. Thus, the learning modules developed are valid, practical, and effective for use in learning.Keywords: Development; Module; Islamic integration

Workload is the ability of the worker's body to accept the job. From the standpoint of ergonomics, every workload received must be appropriate and balanced against the physical and psychological ability. The good Response time for patients is <5 minutes. Handling of emergency is the whole act performed in emergency conditions that are effectively and efficiently. The purpose of this study was to determine the relationship workload response time nurses with nurses in emergency departments of RSUD Bitung General Hospital. This study was descriptive and cross sectional study. Samples were taken based on the number of respondents as many as 31 nurses by using total sampling. The data collection is done by filling out the observation sheet and questionnaire. Furthermore, the data that has been collected processed with the aid statistics analyzed by chi square test with significance level is ? = 0.05. After the results, the value of p = 0.008, this may imply that there is a relationship between the workload of nurses response time. CONCLUSIONS of this study found that there is a relationship between nurses workload response time. Suggestions for the research was taking place is setting a good system including facilities and infrastructure in order to nurse response time can be improved.