Publication Search

The purpose of this study was to determine the effect of work conflict and work stress either partially working, and the simultaneous of the employee performance at PT Herculon Carpet Semarang. This research is a descriptive quantitative study with  sample 72 employee. Data collection methods used were purposive sampling. Data were analyzed with the statistical software SPSS 25. The result of the research showed that variable of  work conflict influence significant positive for employee performance with thitung score amounted 4,261 > ttabel 1,995 and significant score 0,000 ˂ 0,05, variable of work stress influence significant positive for employee performance with thitung score amounted 3,215 >ttabel 1,995 and significant score 0,002 ˂ 0,05, then variable of work conflict and work stress simultant influence significant positive for employee performance Fhitung score amounted 22.044 > Ftabel 3,13 and significant score 0,000 ˂ 0,05. Result for koefisien determinasi (R2) amounted 0,390 or amounted 39%

Security Parking UIN Walisongo Semarang at this time can be said to be in poor condition. The high case of loss of a motor vehicle cause anxiety for the academic community. Parking system that is traditional that is doing the checking of identity cards at the exit of the campus is less effective. Hence the need for a system of security parking modern and computerized, so that activities out of the vehicle can be recorded and stored automatically. Based on these problems, the authors designed a parking Security System as a WEB-based form of increased security parking campus UIN Walisongo Semarang. By using RFID technology (Radio Frequency Identification) are planted on the card identity, which can later be used as an authentication tool typing will enter and exit the campus area. To provide double security, there are Features of the Live Camera with the base website that serves as a tool for monitoring vehicles that are parked in real time. The output of this final project is to produce a prototype security system parking. Not only specialized hardware, but also software design of the System monitoring of vehicles in live Web-based. So the users of the parking facilities can monitor the vehicle anywhere.  

Technology assistance is very helpful for community activities including financial institutions, such as the application of Fintech (Financial Technology). Fintech utilizes technology to improve banking and financial services performed by companies by utilizing software technology. Along with the development, Fintech began to have a negative impact, especially from the money loan service or Fintech Peer to Peer Lending (P2PL). the problem is how is the protection for debtors / customers, such as attempts to intimidate customers who have difficulty paying. The method used in this research is normative juridical, namely research based on secondary data, which is then analyzed qualitatively and presented in a qualitative form.Based on the research results, it can be concluded that protection for debtors or customers who feel disadvantaged can take 5 (five) ways, which are regulated in the Consumer Protection Law, OJK Regulation, ITE Law, BI and Government Regulations. Safeguards in the Consumer Protection Law are accommodated in Article 4. OJK's efforts, in collaboration with Kominfo and AFPI, are that if there is intimidation that is detrimental to the debtor, the debtor can submit a complaint report through the website page provided by the OJK and AFPI. Debtors can also report to the authorities. The ITE Law can be seen in Article 26 of the ITE Law. Efforts made by Bank Indonesia, namely BI to form the Bank Indonesia Fintech Office (BI-FTO) and recommend to follow the existing regulations in PBI No. 16/8 / PBI / 2014 and PBI No 18/17 / PBI / 2016 concerning Electronic Money (PBI E-Money).           Keywords: Financial Technology, Legal Protection, Debtor Efforts

Multimedia learning software development requires design methods, development tools, examination models and proficiency in Information Technology systems. It is necessary to formulate a Holistic Method which considers all related aspects in order to guide the quality of good design in designing Multimedia Learning. Implementing the findings of the Holistic Method formulation to build multimedia learning with good design quality. This study formulates the stages of multimedia development which include: Creative Brief, Design, Material Preparation, Compiling, Testing, Distribution. The multimedia software development process will be guided by 15 guiding elements which are grouped into 5 elements, include : content, appearance, utility aspect, user caracter, and didactic. These guiding elements are used to produce good quality learning multimedia designs. The methodology is called Holistic Multimedia Development Model (HMDM).

Gajah Putih University Takengon is a private university located in Central Aceh District, Pegasing District, consisting of several faculties, one of which is the Faculty of Engineering which has one study program, namely Informatics Engineering. In promoting and informing the wider community, the Faculty of Engineering, Gajah Putih University, Takengon uses brochures and website media which the author feels that this method is still lacking in informing because not all facilities can be informed in detail, from this problem the authors conducted research on 3D animation design profile of the Faculty of Engineering, Gajah Putih University, Takengon as a promotional media. The software used in this research is Blender 2.82. In designing the system the author uses the Luther method, the Luther method has six stages, namely concept, design, collecting material, assembly, testing, and distribution.  

The purpose of this study was to determine the effect of the forensic accounting and audit investigations in detecting fraud procurement of goods and services. The rise of fraud cases in Indonesia, one of which is fraud related to public needs, namely the procurement of goods and services. This is reminiscent of the real threat of fraud in the form of corruption in the procurement of goods and services that can cause poor quality of goods / services produced so that they cannot serve the public interest effectively and efficiently. In this context, the community is the most disadvantaged party. Collecting data in this study through the distribution of questionnaires with a total sample of 34 auditor respondents in the field of Investigation of the Badan Pemeriksa Keuangan dan Pembangunan DKI Jakarta. This research uses PLS (Partial Least Square) analysis technique, using SmartPLS software testing tool version 3.2.8. The results of this study indicate that the results of the analysis of the application of forensic accounting and investigative audits have a significant effect in detecting fraud procurement of goods / services.

This study aims to test empirically the factors that influence corporate social responsibility disclosure (CSRD). The predictor variables used are Company Size, Profitability, Dept to Equity Ratio (DER) and Net Profit Margin (NPM). The research population is manufacturing companies listed on the IDX from 2017 to 2019, the sampling method used is purposive sampling. Analysis of research data using multiple linear regression and data testing using SPSS-23 software. The research sample according to the sampling criteria is 34 companies, so that the observations are 102 firm years. The results showed that company size, profitability and NPM had a positive effect on corporate social responsibility disclosure (CSRD) and DER had a negative effect on corporate social responsibility disclosure (CSRD). Overall the independent variables used have an influence on CSRD, based on the t test the independent variable affects 33.6% while 66.4 is influenced by other variables not used in this study. The implication of this research is that CSRD can be increased by increasing company size, profitability and NMP and reducing DER.  Keywords: CSRD, Company Size, Profitability, DER and NPM.

Developing of prototype now are became easier with the existence  of 3 d printer, now is common known as rapid prototyping method. There are many different method on 3d printing depend on material used for printing. The wide range of material that can be print using 3d printer such as metal to plastic even ceramic. The rapid prototyping using 3d printer have various advantage compare to traditional prototyping. The development of 3d printing makes it not only for prototyping but can be a small batch manufacture, where economic scale of production cannot be reach with traditional production. The fast development of computer and internet technology have big impact on the 3d printer development, before the development of reprap 3d printing was only knew by industrialist and manufacturer. After reprap born, 3d printer is became more common to personal user. People can have their 3d printer at home. People can design their own product using CAD software and send it to 3d printer, or send it via internet to print by 3d printing company. Even there ara lot of advantages of 3D printer development , there is some disadvantages of 3d printer, especially on regulation.          

This community service was conducted for Karang Taruna, a youth organnization, at Perum Graha Kencana RT 01 RW 27 Kadipiro Surakarta. The focus was a training of using Rosetta Stone and Google Translation to improve English skills. The materials were delivered using three phases namely presentation, practise, and production. The training was beneficial for the participants specifically to improve their listening, speaking, reading, and writing skills as well as translation. Having adequate understanding of using Rosetta Stone and Google Translation, the participants were able to develop their English especially when completing school assignments.Keywords: Rosetta Stone, Google TranslationÂ

The advancement of information technology especially in computerized systems is snowballing. It is also backed by a range of demands from industry/ companies that want to abandon the conventional way of conducting business operations to the use of information technology. MÈMORE is a company engaged in the decoration and crafts industry. The company is now using a computerized system in the form of Microsoft Excel software to monitor the company's income and expense and the company often maintains a separate report in a special book. However, this causes problems for these businesses as there is no more efficient method for data processing or for handling the income and expense. In order to solve the problems of the company, a computerized system of financial management is required that will be tailored to the problems and needs of the owner of the business in order to support the company's growth with reliable, managed, and safe financial data. The system can also differentiate its use between the owner and the employee. It is useful for ensuring the confidentiality and protection of company revenue and expenditure data. 

The purpose of this study is to determine the effect of profitability, liquidity, leverage on firm value and determine the effect of dividend policy in moderating the relationship of the effect of profitability, liquidity, leverage on firm value. This research is a quantitative research. The population is 154 manufacturing companies listed on the Stock Exchange in 2016-2018. The sampling method uses a purposive sampling method and a sample of 39 companies is produced. Analysis using multiple linear regression and MRA (Moderated Regression Analysis) using SPSS software version 24. The results showed that: 1) Profitability and leverage have a significant positive effect on firm value, while liquidity has no effect on firm value, 2) Dividend policy is able to moderate relationship between the effect of profitability on firm value, 3) Dividend policy is not able to moderate the relationship of the influence of liquidity on company value, 4) Dividend policy is able to moderate the relationship of the influence of leverage on firm value.

This study aims to explain the effect of financial capital on the performance of SME companies through innovation strategies. In this case, the direct effect of financial capital on innovation strategies is explained, the direct effect of financial capital on SME company performance and, the effect of financial capital on the performance of SME companies through innovation strategies. This research is a quantitative study with an analysis unit of SME companies in Makassar City. the number of samples of 180 SME companies taken accidentally. The analytical methods that are used include validity, reliability, goodness of fit, conventional factor analysis, regression analysis, and path analysis with the help of Amos software. The results of this study indicate that: a) financial capital does not have a direct positive effect on innovation strategy b) Wear capital has a significant positive direct effect on SME company performance c) Innovation strategy does not have a significant effect in mediating between capital gains and SME company performance.  Keywords: Financial Capital, Innovation Strategy and SME Company Performance.

This study aims to analyze the effect of capital intensity, inventory intensity, independent board of commissioners and managerial ownership on the effective tax rate. The population in this study are manufacturing companies listed on the Indonesia Stock Exchange (IDX) in 2015-2017. The sample selection uses the purposive sampling method. The results of the sample selection obtained a final sample of 75 companies with an analysis unit of 225. The data analysis of this study used descriptive statistical analysis and Structural Analysis Modeling (SEM) with AMOS 22 software. The results showed that inventory intensity had a significant positive effect on ETR, while for intensity capital, independent board of commissioners and managerial ownership, have no significant effect on ETR. The conclusion of this study is that the size of ETR in manufacturing companies is influenced by inventory intensity. Whereas capital intensity, independent board of commissioners and managerial ownership in manufacturing companies cannot influence the size of the ETR value.  Keywords: ETR; capital intensity; inventory intensity; managerial ownership.