Publication Search

The increasing demand for electrical energy and the issue of climate change are driving the utilization of renewable energy, one of which is through Solar Power Plants (PLTS). The Province of Bali targets the development of PLTS of 108.2 MW, equivalent to 8.62% of the total solar energy potential of 1,254 MW by 2025. However, land limitations pose an obstacle to the construction of large-scale PLTS. Floating solar power plant design can be a solution to this issue. By utilizing 4,955.32 m² of water surface at the Telaga Tunjung Dam, the Floating Solar Power Plant at Telaga Tunjung Dam has a potential capacity of 141.4 kWp, using 280 Trina Solar modules of type TSM-DEG18MC.20(II) (505 Wp) combined with one SG110CX inverter with a capacity of 110 kW. The annual electricity production of the floating solar power plant, based on Helioscope software, is 201.1 MWh. The economic feasibility parameters used in this study include initial investment cost, Profitability Index (PI), and Payback Period (PP). The analysis results show that the 141.4 kWp floating solar power plant project at Telaga Tunjung Dam has an initial investment value of IDR 1,248,764,582, a PI of 1.26, and a PP of 3.91 years. Therefore, this project is considered economically feasible and contributes positively to reducing CO₂ emissions.

 The Karanggeneng River in Rembang Regency, Central Java, serves as the main water source for the surrounding community but is vulnerable to seawater contamination during the dry season due to decreasing river elevation. To address this issue, this study aims to design and implement a river water elevation monitoring device based on the Internet of Things (IoT) powered by a hybrid Solar Power Plant (PLTS). The device utilizes the MB7360 ultrasonic sensor connected to an ESP32 microcontroller to measure water elevation in real-time and display the data through an LCD and the Blynk application on a smartphone. The methodology includes literature review, device design, system implementation, and field performance testing. Test results show that the sensor can measure water height accurately within a range of 30 cm to 5 meters, and the PLTS system is capable of supplying the required 0.56 Watts of power. The study compared two alternative solutions and selected the ESP32-based system as the best option due to its efficiency, cost-effectiveness, and easy-to-source components. The conclusion of this research indicates that the developed device can provide accurate and continuous information, support monitoring of river conditions to prevent the risk of seawater intrusion, flooding, or drought, and has the potential to be applied as a mobile system in various other river locations across Indonesia.

This research aims to monitor the performance of a 2x100Wp Solar Power Plant (PLTS) using the parameters of current, power, and solar intensity. The monitoring system is designed to record and analyze the electrical output of the solar panel in real-time. The experimental method is used by collecting data directly through current and voltage sensors, as well as light sensors connected to a microcontroller. Data was collected to see the relationship between solar intensity and electrical power generated. The test results show that the intensity of the sun greatly affects the amount of current and power generated by the solar panel. This monitoring system can be a tool for learning and analyzing the performance of small-scale solar power systems in a laboratory environment.

This study aims to examine the potential and challenges of utilizing Solar Power Plants (PLTS) in Medan City, which is geographically located near the equator and receives high exposure to sunlight throughout the year. The method used is a literature review with a narrative review approach that analyzes secondary data from various journals and relevant scientific articles. The results of the study show that Medan City has an average annual horizontal global solar radiation intensity of 463.61 W/m², with the potential for electrical power that can be generated from rooftop solar panels reaching 748.57 MW (monocrystalline), 598.85 MW (polycrystalline), and 299.43 MW (thin film). This potential is comparable to the capacity of large-scale power plants. The use of PLTS contributes to reducing carbon emissions, increasing energy security, creating jobs, and developing the local economy. However, challenges such as high installation costs, limited suitability of roof structures, and low public awareness are still major obstacles in the implementation of this technology. Therefore, synergy is needed between government policies, public education, and technological innovation to optimize the use of solar energy in urban areas such as Medan.

Tropical regions offer significant opportunities in the development of renewable energy, particularly through industrial-scale Solar Power Plants (PLTS). This study aims to analyze PLTS implementation strategies in tropical areas as a means to support clean energy and green economic development. A literature study with a qualitative-descriptive approach was employed. The results show that industrial-scale PLTS implementation is highly promising due to stable and high solar radiation throughout the year. However, challenges persist such as limited infrastructure, high initial capital, and inconsistent regulatory frameworks. Thus, collaboration among stakeholders is essential to establish a sustainable energy ecosystem.

Remote islands in Indonesia face significant challenges in achieving sustainable electricity supply. This study analyzes the technical and economic feasibility of implementing a hybrid Solar Power Plant (PLTS) and Wind Power Plant (PLTB) system on Dudepo Island, North Gorontalo Regency. With an average solar radiation of 5.2 kWh/m²/day and wind speed of 4.8 m/s, the hybrid system is designed to supply approximately 97% of local electricity demand with an efficiency of 85%. Simulations using HOMER Pro reveal an optimal configuration of 100 kW PLTS, 60 kW PLTB, and 300 kWh battery storage. Economic analysis indicates a Levelized Cost of Energy (LCOE) of IDR 1,450/kWh, more affordable than conventional diesel generators, with an eight-year payback period. The system’s implementation has enhanced community well-being by providing stable electricity access for education, healthcare, and economic activities. Moreover, it contributes to carbon emission reduction by up to 120 tons of CO₂ annually. Technical challenges and local human resource capacity necessitate sustainable management strategies, including technician training and IoT-based monitoring systems. This study offers recommendations for sustainable renewable energy development on remote islands as a model for environmentally friendly energy transitions.

Indonesia, which is located on the equator, has great potential to utilize solar energy, with an average solar radiation reaching 4.80 kWh/m² per day. This provides an advantage in the development of Solar Power Plants (SPP), one of which is through the installation of rooftop on the roof of the building as a source of electrical energy. This study aims to analyze the feasibility of SPP development by considering the techno-economic aspects of the Pondok Juice cafe. The total real electrical energy consumption required by the Pondok Juice cafe is 32,548 Wh/day. Assuming a system loss of 15%, the total electrical energy requirement that must be supplied by the SPP is 37,430.2 Wh/day. The initial investment projection is IDR 204,265,197, with operational and maintenance costs for 25 years of IDR 105,760,028. The investment feasibility analysis shows NPV of IDR 441,523,820.10, BCR 4.11, DPP ±5 years, and IRR 15.55%, which proves that this SPP planning is feasible to implement.

Indonesia is currently very dependent on fossil energy, the availability of which is limited and has an emission effect on the environment. To sustain the availability of electrical energy, alternative energy sources are needed in the form of renewable energy, one of which is the Solar Power Plant (PLTS). This research discusses the design of an On Grid PLTS system in the park at Campus II, Pamulang University using Pvsyst 7.2 software by taking into account technical and economic aspects in three scenarios. In scenario 1, the On Grid PLTS is designed to suit the energy needs of the Pamulang University Campus II park, while in scenario 2 it uses an OFF Grid system and in scenario 3 it uses a Hybrid PLTS system (PLN+Batteries). Economic aspects are calculated using the Net Present Value (NPV) and Discounted Payback Period (DPP) methods. Technically, the Performance Ratio obtained was 83.59% and 83.53% respectively with Solar Fraction of 62.64% and 70.15% respectively. Economically, the NPV value obtained is positive and the investment return period is 7.78 years and 7.8 years respectively. So, designing an On Grid PLTS in the park of Pamulang University's Campus II is considered feasible.

Indonesia is a developing country located at the convergence of four tectonic plates, making it highly prone to natural disasters such as earthquakes, tsunamis, landslides, and volcanic eruptions. These frequent disasters highlight the critical need for reliable electricity during emergencies. However, disaster-affected areas often struggle to restore power due to accessibility issues. To address this, alternative energy sources are needed, and Solar Power Plants (PLTS) offer a practical solution. PLTS are easy to implement, depend only on sunlight, and provide clean energy with low carbon emissions. Under clear skies, solar radiation can reach 1,000 Watts per square meter, making it a powerful energy source. Additionally, PLTS systems are adaptable and can be deployed in various formats, including mobile units. This study focuses on designing a Mobile PLTS to support BASARNAS operations in disaster zones. Data collection was conducted using resources from BNPB, BMKG, BASARNAS, and NASA. The analysis includes the geographical characteristics of the site, solar radiation intensity, and the operational dimensions of the BASARNAS Mobile Truck. The study aims to determine the suitable system specifications and estimate the energy production capacity of the Mobile PLTS. The proposed design features 20 solar panels, each with a capacity of 300 Wp, producing an average of 27.70 kWh per day. It also includes 16 batteries for energy storage. The remaining space in the truck can be used for transporting logistics or essential tools, making it a multifunctional unit ideal for disaster response scenarios.

This research aims to design a Solar Power System (PLTS) for households that can meet an energy demand of 4.5 kWh per day. The system design takes into account the efficiency of solar panels and the average solar radiation potential in Semarang, which is around 5 hours per day. The method used in this research involves calculating the required solar panel capacity based on the daily energy needs of the household, panel efficiency, and solar radiation hours. The calculation results show that the required PLTS capacity is 1125 Wp, which is then designed using 4 solar panels with a capacity of 300 Wp each. This system is expected to allow households to meet their energy needs independently and sustainably. The implication of this research is to provide an alternative solution for households in reducing their dependence on conventional energy sources, while contributing to the effort to reduce greenhouse gas emissions.

Indonesia, as an archipelagic country with over 17,000 islands, faces significant challenges in providing electricity access, particularly to small and remote islands. One promising solution is Solar Power Plants (PLTS), both land-based and floating solar plants that utilize water surfaces, suitable for areas with limited land availability. This study evaluates the economic feasibility of floating solar plants and land-based solar plants using the Levelized Cost of Electricity (LCoE) approach. LCoE encompasses all costs of construction, operation, maintenance, and energy production over the plant's lifespan, serving as a key benchmark in selecting power generation technologies. The findings show that the LCoE for floating solar plants is Rp11,197.00/kWh, lower than land-based solar plants at Rp11,769.00/kWh, although both exceed the electricity purchase price in Kodingareng, South Sulawesi, at Rp2,460.00/kWh. This difference is influenced by higher construction costs for floating solar plants but offset by greater energy output and lower operation and maintenance costs. This research provides a basis for developing solar power systems in archipelagic regions, emphasizing efficiency and sustainable energy solutions.

Photovoltaic (PV) systems are a promising renewable energy source due to their ease of installation, eco-friendliness, and abundant solar radiation availability. Indonesia has a theoretical potential of 4.625 kWh/m² and a practical potential of 3.767 kWh/kWp; however, as of September 2021, its installed capacity was only 194 MW. Land constraints have led to the development of floating PV systems, which reduce land usage and enhance module efficiency due to lower temperatures above water. Nonetheless, PV systems face challenges from solar radiation intermittency, influenced by cloud opacity, causing output power fluctuations. This study maps cloud opacity patterns on Kodingareng Island based on dry and rainy seasons using 2020 BMKG data. Results indicate that output power during the dry season is more stable than in the rainy season due to lower cloud cover. Conversely, thick cloud cover during the rainy season reduces solar radiation reaching PV modules, resulting in fluctuating power output. Thus, floating PV systems demonstrate better energy availability during the dry season. This study highlights the importance of understanding cloud opacity patterns in planning floating PV systems to address the challenges of solar radiation intermittency.