Publication Search

PT Atlantic Anugrah Metalindo is a manufacturing company that produces costumize products, steel door systems and fireproof doors. Currently PT Atlantic Anugrah Metalindo is producing 100 units of pallet rack manufacturing with customers from PT X so that proper material requirements planning is needed. The purpose of this research is to determine the material requirements of pallet racks optimally and efficiently. This research requires calculating the Bill of Materials (BOM) using the Cutting plane method and controlling the production process to run effectively and efficiently. Based on the calculations that have been carried out, the results show that for 2 mm thick mild steel material requirements, 6 sheets of plate are needed, 3 mm thick mild steel requires 173 sheets of plate, 3.6 mm thick mild steel requires 12 sheets of plate and 5 mm thick mild steel requires 12 sheets of plate. So that from these calculations PT Atlantic Anugrah Metalindo is expected to minimize the material requirements of pallet rack products.

The increasingly high cost claims for caesarean section cases in the National Health Insurance or Jaminan Kesehatan Nasional (JKN) era mean that hospitals are required to provide service efficiency, the BPJS Health payment system to hospitals is through the INACBG's (Indonesia Case Based Groups) rates. The purpose of this study is to analyze the influence of clinical pathway compliance and prescription writing according to the national formulary on cost control with caesarean section indication as an intervening variable at St Theresia Hospital. This type of research is confirmatory research using a quantitative approach. The sample in this study amounted to 80 samples from caesarean section cases in August-October 2023. The sampling technique used purposive sampling. Based on the results of testing the Path coefficients hypothesis, it was found that F count (63.047) > F Table (3.432) with a significance level of 0.05, the results of the t value> 1.96 and p < 0.05. The results of data analysis and hypothesis testing showed that there was an influence of clinical pathway compliance, writing prescriptions according to the national formulary and indications for caesarean section on cost control.

The inventory problem that still occurs at PT Indonesia Plafon Semesta is the accumulation of resin and calcium raw materials which results in considerable losses. PT Indofon began to experience a buildup of resin raw materials in August amounting to 16,100Kg and for calcium amounting to 15,200Kg so that each month it soared until its peak in October, namely a buildup of 23,500Kg of resin, and 23,200Kg of calcium. The use of the right method for inventory control problems is Just In Time , which is a management strategy used to optimize the production process and product delivery by buying and producing only when needed and at the right time. Silver Meal Heuristic, a heuristic approach used in inventory control to determine the optimal lot size. The quantity of raw material orders using JIT is relatively more than the silver meal, but with JIT the supplier only needs to send 4-5 times, meaning that the company can save costs. The quantity and frequency obtained from data processing using silver meal is more optimal. However, the cost of raw material inventory incurred is quite large. For a decrease in efficiency costs by implementing a policy of making purchases with Just In Time  (JIT) and is expected to save on raw material inventory costs. So that these cost savings can be allocated by the company to other costs.

This article delves deep into the role of Artificial Intelligence (AI) in assisting human resources professionals in the recruitment and selection process. AI is a result of the emergence of machine learning, which can mimic human thought patterns and working mechanisms. AI, or artificial intelligence, has been applied in various fields, including quality control in manufacturing, the entertainment industry, autonomous vehicles, and is increasingly making inroads into the realm of recruitment. With the support of algorithms, AI plays a vital role in helping HR professionals filter applicant portfolios, fundamentally transforming the traditional recruitment process. Through a comprehensive analysis drawing from various literature sources, this article seeks to uncover the wide-ranging changes and profound impacts brought by AI into the world of recruitment. The conclusion drawn from this exploration is that AI has the potential to expedite the acquisition of high-quality applicants more efficiently and cost-effectively while also reducing subjectivity in human assessments. However, this transformation is not without concerns about ethics and data security, which require careful consideration.

World Health Organization (WHO) approximates 1.28 billion individual suffers hypertension, with 46% of them does not realize it, and only 1 of 5 hypertensive individual has their blood pressure controlled. Hypertension prevalence is still relatively high in the elderly population who live in nursing home. This is one of the main health adversities that often happens and should not be underestimated due to its risk of complications. Uncontrolled blood pressure is one of the main risk factor to the global disease burden and total of global death, contributing up to 9,4 millions of deaths (8,5% of the global total) annually. This activity aims to increase the knowledge of the community about hypertension in elderly who lives in nursing home to increase the quality of life and reducing the cost burden of therapies and treatments. We use PDCA activity method to ensure the program could run smoothly and efficiently. This activity included 34 elderly respondents of the St Fransiscus Community with the mean age of 4 (11,8%) years. We found that 4 (11,8%) of the respondents have uncontrolled blood pressure. With the implementation of this program, it is hoped that the public awareness of elderly hypertension and its prevention is increased, so that there will be increase of quality of life for the elderly in the future and relieving the economical burden.

This research aims to analyze time and cost control on the ITC Pole Fiber Optic project managed by PT. LUM uses the Earned Value Management (EVM) method. EVM is an effective method for measuring project performance and progress by combining cost, time and completed work data. This case study uses secondary data obtained from project progress reports and PT financial data. LUM. Analysis is carried out to identify cost variance (CV) and schedule variance (SV) as well as cost performance index (CPI) and schedule performance index (Schedule Performance Index - SPI). The research results show that the ITC Pole Fiber Optic project experienced several deviations from the planned budget and schedule, with CV and SV showing negative values ​​at several project stages, indicating cost overruns and delays. The CPI and SPI values ​​obtained also provide an overview of the efficiency and effectiveness of project implementation. Based on these findings, several improvement steps are recommended to optimize time and cost control to improve project performance in the future. This research makes an important contribution in providing insight into the application of EVM in fiber optic installation projects and can be used as a reference in managing similar projects in the future.

Drug-resistant tuberculosis (TB) is an escalating global health issue, particularly with the rise of multidrug-resistant (MDR-TB) and extensively drug-resistant TB (XDR-TB), which complicate treatment and control efforts. Resistance to both first-line and second-line drugs weakens the effectiveness of standard WHO-recommended therapies, while alternative drugs can cause severe side effects and reduce patient adherence. This study aims to explore the integration of bioinformatics and pharmacogenomics in supporting personalized TB treatment to improve therapeutic success and reduce the risk of further resistance. The research employed a laboratory-based experimental design with a bioinformatics approach, involving TB patients with clinical evidence of drug resistance. Clinical samples were analyzed through whole genome sequencing to identify gene mutations associated with resistance, followed by pharmacogenomic mapping to predict pharmacological responses based on patients’ genetic variations. The results revealed several specific gene mutations consistently linked to resistance and produced individualized therapeutic recommendations that were more targeted than standard protocols. Effectiveness evaluation demonstrated that genome-based personalized therapy yielded higher treatment success rates, faster recovery times, and lower rates of subsequent resistance. These findings highlight the significant potential of precision medicine in TB management, particularly for resistant cases that are difficult to treat with conventional approaches. In conclusion, the integration of bioinformatics and pharmacogenomics plays an essential role in strengthening TB treatment strategies through a personalized, adaptive, effective, and sustainable approach. Nevertheless, its implementation still faces challenges such as high costs, limited infrastructure, and the need for clear regulations regarding the use of patients’ genomic data.

Inventory is an important factor in carrying out a production. Many companies experience problems in terms of inventory control, one example is inventory scarcity. The purpose of this study is to optimize the need for goods so that the company will not experience problems with inventory shortages or inventory buildup. This study uses  the Min-Max method  by collecting data in the form of inventory of goods needs, ordering costs, and storage costs. The result of this study  is that the safety stock value  of 80,887-tons is useful for protecting and anticipating inventory shortages, so companies must be on guard when they are at that value. Then, the Reorder Point value was obtained at 108,165 tons. Furthermore, the value of the Minimum Inventory  is 269,879-tons and the Maximum Inventory is  378,044-tons so that companies are not recommended to have more inventory than that value.    

Pematangsiantar City Army Hospital is one of the state-owned health facilities that provides booster vaccination services with 4 types of booster vaccines available, namely sinovac, astrazeneca, pfizer and moderna. The uncertain level of demand for booster vaccines causes the Pematangsiantar City Army Hospital to require booster vaccine inventory policy planning using the continuous review (s,S) method to prevent overstock which results in considerable cost expenditures. From the calculation of booster vaccine inventory control using the continuous review method (s,S), it is obtained that the total inventory cost has a significant percentage change. For the type of sinovac, the percentage change in total inventory costs reaches 92% of the total inventory costs in the existing conditions, for astrazeneca reaches 58% of the total inventory costs in the existing conditions, for pfizer reaches 60% of the total inventory costs in the existing conditions, and for moderna reaches 95% of the total inventory costs in the existing conditions. The results of the calculation of the total cost of inventory with continuous review (s,S) can provide a decrease in costs incurred by the Pematangsiantar City Army Hospital. This is because the continuous review (s,S) inventory policy minimises the cost of vaccine shortages which are quite costly.

This research addresses water supply issues at PT. Indofood CBP Sukses Makmur Semarang, Noodle Division. The Submersible Pump often experiences damage, such as Short Circuits due to phase failure. To address this, a Phase Failure Relay (PFR) was added to control the pump. The study employs observation, literature review, and interviews to evaluate the impact of PFR on pump control and safety aspects. The research findings indicate that the addition of PFR successfully prevents damage, with the potential for reducing repair costs, providing a practical solution in controlling the Submersible Pump at PT. Indofood.

This research aims to increase the efficiency of raw material management in the Warmindo Sugar Pak Har UMKM business by considering possible risks, optimizing order sizes, and determining manufacturing order times. An approach using the FMEA (Failure Modes and Effects Analysis) method is used to systematically identify risks that can affect the availability of raw materials. Next, this research looks for the optimal solution by calculating the Economic Order Quantity (EOQ) to determine the economical order size. The first specific objective is to identify risks that may occur in procuring raw materials, while the second specific objective is to optimize order sizes in order to minimize storage and purchasing costs. The third step is to determine the optimal time to place an order for making raw materials in order to maintain a smooth production process and avoid stock shortages. The results of this research are expected to provide insight to Warmindo Sugar Pak Har MSMEs regarding the risks that need to be anticipated in procuring raw materials, provide recommendations regarding economical order sizes, and increase understanding regarding ordering time control. It is hoped that this research can contribute to the development of more effective and efficient raw material management strategies in the context of MSMEs.

Inventory control is very important for companies because without proper inventory control the company will experience problems in meeting consumer needs both in the form of goods and services produced by the company. RSUD Dr. Pirngadi is one of the companies that uses conventional methods to calculate the total cost of inventory so that the costs incurred both for ordering syringes and storage costs are still high, therefore it is necessary to control the inventory of syringes which aims to minimise inventory costs so that company goals can be achieved. In solving the problem of controlling inventory costs to minimise total inventory costs, namely using robust optimisation. Robust optimisation is an optimisation model that contains uncertainty data to obtain the right solution using linear program solving. The results of research at the RSUD Dr. Pirngadi obtained the total cost of inventory according to company policy for the use of 3 mL Terumo syringes is Rp.426,104,665 while the robust optimisation method is Rp.319,647,106 so it can be concluded that by applying the robust optimisation method to the company can save inventory costs of Rp.106,987,599 or 25%.  Furthermore, the total inventory cost of using a 5 mL Terumo syringe according to company policy is Rp.208,402,454 while the robust optimisation method is Rp.166,608,139 so it can be concluded that by applying the robust optimisation method to the company can save inventory costs of Rp.41,794,315 or 20%.

This rapid development of technological knowledge can help humans fulfill the new order of civilization in the era of technology that was created to make daily work easier. Computers are not only used as electronic typewriters but have been used to increase work and business productivity. An information system is a system that provides information for the decision-making process at every level in an organization. Network users control what they do through graphical applications prepared for the user. All data including electronic mail (e-mail), databases are stored on the server. Special servers for the internet or even for certain internet functions are the heart of information on the internet. Getting many benefits from the internet, for example reducing communication costs, improving communication and coordination skills, distributing knowledge and providing facilities for e-business or e-commerce, including reducing communication costs. In this article the author explains the implementation of the internetworking concept (internet and extranet), the benefits of using each and the development that can be carried out from the internetworking concept, components and forms of application of the internetworking.

This study aims to determine the application of standard costs, raw material costs, labor costs, and overhead costs at PT.Bibit Alam Sampoerna. The object of this study is the financial statements of the company administration for every transaction that comes out and costs, PT.Bibit Alam Sampoerna is a company engaged in Freshwater lobster cultivating services. The tools used in this research are interviews used as a data collection technique if the researcher wants to conduct preliminary studies to find problems that must be investigated or want to know things from respondents who are more in-depth and in a slightly small number of respondents. And observation is the most basic way to obtain information about social phenomena through the process of observation. Direct observation regarding the work environment and production processes from raw materials to finished product processes. The analysis technique used in this research is descriptive quantitative. Researchers will analyze the data in the form of costs in the production activities of PT. Seed Alam Sampoerna regarding the cost of production. Collecting Data, Identifying Company Standard Costs, Separating these costs based on cost behavior, namely variable costs incurred in the production process, Analysis of raw material costs, Analysis of labor costs, Analysis of factory overhead costs, Calculating the cost of production using the calculation according to researcher. After the company determines the standard cost of production costs, the company can carry out its production activities in accordance with its production goals. The standard cost set is a guideline or measure for each production cost that will be incurred. Research results To increase the effectiveness of production cost control, companies must implement a standard cost system which is used as a guideline for production costs.      

This study aims to know the cost of designing maintenance using the Reliability Centered Maintenance method. Engine and fuel control, is a fuel engine system and fuel control system; in charge of distributing and measuring fuel from the fuel storage tank, to the combustion chamber. Gas turbine or  component area (Combustor), functions as a distributor of fuel used in aircraft systems and plays a role in carrying out its operation (Boeing 737-400 Aircraft Maintenance Manual). Reliability is the possibility of a component or system to be able to operate and/or carry out its functions. The function has been assigned to certain operating conditions and in a certain environment for a predetermined period of time. Thus, reliability is the probability that it will not fail or be able to perform its function for a period of time (t) or more. In the analysis of preventive maintenance financing, which is carried out when the reliability value reaches 70%, 60% and 50%, respectively, it is obtained for each component.

In a hotel, it requires various needs in the form of operational goods, food ingredients, beverage ingredients or assets and this is where the role of the Receiving Officer is needed in the procedure for receiving goods. The process of receiving goods documents that require time for the approval of the General Manager makes it difficult for the Receiving Clerk to receive goods because when receiving goods the Receiving Clerk does not bring Purchase Orders and Purchase Requisitions because they are still in the process of approval and the Receiving Clerk's limited understanding of the quality of goods also hinders the procedure for receiving goods. this can be detrimental to the hotel. Guided by the Receiving Job Description, if the Purchase Order and Purchase Requisition documents are still in process, this will also hinder the Receiving Clerk in checking the quality and quantity of incoming goods. By using the interview method with 3 informants, which was given to several employees at the Ministry of Finance, so that the author is more accurate, it is also guided by the Literature Study studied. The author manages these sources of information into a result of field facts, so that the writer can provide conclusions on the problems that arise and provide advice to management. The data collection method used in this study is a qualitative method with a descriptive type. Data collection techniques using observation techniques, interviews, and documentation, in order to obtain accurate data and documents. The people interviewed were Receiving Officer,Cost Control, Buyer, Purchasing Officer

This study aims to analyze the marketing strategy implemented. The marketing strategy is a series of plans as a joint tool to achieve the long-term goals set by the company. The marketing strategy provides direction for each company to control all aspects in order to achieve the company's goals in meeting consumer demands and needs. This research is a qualitative descriptive research. By taking respondents from several sources who are considered appropriate to become resource persons for research. The research results are that the location research has implemented a marketing promotion strategy to increase sales turnover. Sales promotions that are utilized include Personal selling, Sales Promotion and Direct Marketing. The problems faced by the company resulted in fluctuations in sales targets, lack of promotional media aimed at providing information on ongoing promotions and high costs for promotions aimed at increasing consumer brand awareness.  

This study aims to determine the extent to which responsibility accounting is implemented at Pintar Asia Swalayan and to evaluate the efficiency of cost control at Pintar Asia Swalayan Maumere. The analytical method used in this study is descriptive method, with data analysis techniques in the form of an overview of the application of responsibility accounting which refers to the 5 conditions for implementing responsibility accounting according to Mulyadi's theory. The results obtained in this study indicate that Pintar Asia Swalayan Maumere has not fully implemented the requirements for implementing responsibility accounting because the cost budgeting process has not involved all units in the company and there is no separation of costs between controlled and uncontrollable costs. Cost control is also not fully efficient because there is still a difference between budgeted costs and actual costs.

Patty sandwich is a processed product made from catfish, coconut runch, and clover leaf puree which is formed into a square measuring 8 x 8 cm with a thickness of 1 cm which is used as a filling for white bread or sandwiches. The aims of this study were 1) to determine the sensory quality of patty sandwiches with the proportion of catfish and roasted young coconut with the addition of clover leaf puree, 2) to determine the nutritional content per 100 g of patty sandwich with the proportion of catfish and roasted young coconut with the addition of clover leaf puree, and 3) find out the cost of raw materials for patty sandwiches. This type of research is an experiment. The data collection technique used meted observation by means of a sensory quality test on 35 panelists (5 expert panelists and 30 semi-trained) who were assisted by a line scale observation sheet (0-15 cm). The independent variables in this study were the proportions of roasted catfish and young coconut (60% : 40%, 70% : 30%, and 80% : 20%) and the addition of cloverleaf puree (5% and 10%). The dependent variable of the research is sensory quality including shape, color, texture, aroma, and taste. The control variables in this study include the types of materials, equipment, and processing techniques. Data analysis used double anova test and Duncan's further test. The results showed 1) there was an effect of adding cloverleaf puree on shape, color, and taste, 2) there was an effect on the proportion of catfish and roasted young coconut on texture, aroma and taste, 3) there was no effect of the proportion interaction with the addition on the sensory quality of the patty sandwich on shape, color, texture, aroma, and taste.

This research is about fish meatballs using the main raw material of tuna which is proportioned with shrimp to help give more taste and be able to increase the nutritional quality content of the product and the addition of clover puree is expected to be able to increase the nutritional content and also be able to increase the potential for rare local ingredients. used. The purpose of this study was to determine 1) the sensory quality of fish balls with the proportion of tuna and shrimp and the addition of cloverleaf puree 2) the nutritional and non-nutritional content based on laboratory tests including protein, carbohydrates, fat, water, ash, calcium and potassium 3) cost raw material for fish balls. This type of research is an experiment. Observation data collection techniques by means of sensory quality tests were carried out by 35 panelists. The independent variables in the study were the proportions of tuna and shrimp (80%:20%), (70%:30%) and 60%:40%) and clover puree (5% and 10%). The dependent variable of the research is sensory quality including shape, color, texture, elasticity, aroma, and taste. The control variables in this study include the types of materials, equipment and processing techniques. Data analysis used double anova test and Duncan's further test. The results showed 1) there was an effect on the sensory quality of making fish balls with the proportion of tuna and shrimp with the addition of cloverleaf puree including color, aroma and taste. 2) there is no effect on the sensory quality of shape, texture, and elasticity of the meatballs. 3) the selected product contains nutrition equal to or greater according to SNI 2017 including protein content 8.11%/100gr, fat 3.86%/100gr, water 36.58%/100gr, carbohydrates 49.88%/100gr, ash 1 .24%/100gr, calcium 75.80 mg/100 gr, potassium 86.90 mg/100 gr 4) the best product has a raw material cost of IDR 56,450.