Publication Search

Diaconal ministry is one form of church service that embodies the love of Christ in serving others. However, in practice, this ministry is often carried out in a charitable manner and has yet to fully address comprehensive and sustainable empowerment of the congregation. This study is driven by the urgent need to develop a diaconal service that not only provides temporary assistance but also effectively enhances the socio-economic independence of the congregation, particularly within the context of Gereja Isa Almasih Pringgading, where some Christian members face economic challenges due to limited access, resources, and institutional church support. The objective of this study is to analyze and describe the role of the Church Council in developing reformative and sustainable empowerment-based diaconal ministry. A qualitative descriptive method was employed, with data collected through in-depth interviews with Church Council members and service recipients, direct observations of diaconal activities, and documentation of church archives and social service reports. Data were analyzed thematically to identify patterns of service, empowerment strategies, and socio-economic impacts on the congregation. The study's findings reveal that the Church Council plays a strategic role in transforming diaconal ministry from mere charitable assistance into a structured empowerment program. Successfully implemented programs include entrepreneurial skills training, micro-business mentoring for congregation members, internal church cooperative development, and the establishment of local economic partnership networks. The impacts of these programs are reflected in increased household incomes, improved economic independence for some members, and strengthened social solidarity within the congregation. This study produces a conceptual model of empowerment-based diaconal ministry that can be replicated by other local churches to sustainably enhance congregational welfare.

Difficulty reading the Qu’ran in students will usually be obvious. With the emergence of unusual behavior, one of them is difficulty in reading the Qu’ran. So the efforts of Al-Quran Hadith teachers in overcoming difficulties in reading the Al-Quran in class VII at MTs Al-Ma'ruf Denpasar are very much needed in overcoming students' difficulties. Based on the problems above, the focus of the research is: 1) What difficulties do students experience in reading the Koran? 2) How do Al-Quran Hadith teachers try to overcome students'difficulties in reading the Al-Quran? 3) What are the supporting and inhibiting factors for Al Quran Hadith teachers in overcoming difficulties in reading the Al-Quran? The aims of this research are 1) To find out what difficulties students experience in reading the Qur’an, 2) Efforts of Al-Quran Hadith teachers in overcoming difficulties in reading the Al Quran 3) Supporting and inhibiting factors for Al-Quran Hadis teachers in overcoming difficulties in reading the Al-Quran. This type of research is qualitative with a descriptive approach,informants are determined purposively. The informants are the head of the madrasah, Alquran Hadis teacher, class VII students and parents. Data is collected by interviews, observation and documentation, then analyzed using the stages of data reduction and presentation. data and drawing conclusions The research results show that 1) Difficulties in reading the Qur’an include: difficulty in pronouncing makharijul letters, difficulty applying the laws of reciting tajwid, difficulty in recognizing punctuation, not knowing the length and shortness of reading the Qur’an and lack of fluency in reading the Qur’an. 2) The Al-Quran Hadith teacher's efforts to overcome difficulties in reading the Al-Quran are by making morning recitations of the Al-Quran, arousing students' interest in reading, providing encouragement and motivation, selecting and developing learning methods and providing good role models. 3) Supporting factors for teacher efforts in overcoming difficulty reading the Koran, there is guidance to read the Koran every morning, supporting facilities and infrastructure. The inhibiting factors for teachers in overcoming student difficulties include: low student interest and also family factors.

Background: Patient safety is one of the dimensions of quality that is the center of attention of health practitioners on a national and international scale. Patient safety is a top priority that must be implemented by hospitals with an optimal role of nurses that can support the patient safety movement. A good safety culture creates an increase in service quality in its implementation, the culture of reporting incidents has not been widely practiced because officers think that reporting incidents can threaten the work of medical staff. The purpose of this study was to determine the description of the implementation of patient safety culture in nurses in the inpatient room at Sanjiwani Gianyar Hospital. Method: The method used in this study was quantitative with descriptive research design. The sampling technique used was Nonprobability Sampling type of total sampling of 94 respondents. The research instrument used was a patient safety culture questionnaire which amounted to 42 questions. Results: The results of this study indicate that the implementation of patient safety culture with the culture category is sufficient (57.4%). Conclusion: The conclusion of this study is that the implementation of a patient safety culture is categorized as a sufficient culture, meaning that nurses have implemented a safety culture but are not optimal in carrying out services according to the SKP.  It is expected for hospitals to further optimize and pay attention to the implementation of patient safety culture.

Background: Telepharmacy is the application of telecommunications technology in the provision of pharmaceutical services over long distances. In remote areas such as East Sumba which have limited access to conventional health services, telepharmacy has the potential to be a solution to increase community access to drug information and pharmaceutical counseling. This research aims to determine the perspective and behavior of pharmaceutical personnel regarding Telepharmacy in East Sumba, especially in terms of providing drug information. Methods: This research is a descriptive observational study with a cross-sectional approach. A total of 27 pharmaceutical workers who practice in East Sumba were selected purposively. Data collection was carried out using an online questionnaire via Google Forms. Results: The results show that the majority of respondents were female (59.3%), under 30 years old (88.9%), and had a pharmacy diploma (33.3%). Pharmaceutical personnel generally have a positive perspective regarding Telepharmacy (82.4%), drug information services (82.7%), pharmaceutical counseling (76.3%), drug therapy monitoring (93.8%), and legal restrictions (89.9%). Consclusion: Research shows that the majority of pharmaceutical workers in East Sumba have a positive view of Telepharmacy.

Background: Nurses are the profession that suffers the most from Burnout with a prevalence of 43% due to low ability to manage emotional intelligence. Nurses who are emotionally intelligent will be better able to understand and manage their own emotions and others, motivate themselves so that burnout is lower. The purpose of this study was to determine the relationship between emotional intelligence and burnout in nurses.  Methods: this study was observational analysis research with cross-sectional study design. The sample size of 42 people was selected by total sampling. Instruments to measure emotional intelligence using a self-report questionnaire and burnout using a questionnaire, analysis using the Spearman Rank test. Results: The results of the study of nurses' emotional intelligence were mostly in the moderate category, namely 25 respondents (59.5%). Burnout experienced by nurses is mostly moderate category as many as 27 respondents (64.3%). Rank Spearman test results obtained p value = 0.000 (<0.05) indicates there was a relationship between emotional intelligence with burnout in nurses. Conclusion:  this study can be concluded that emotional intelligence is significantly related to burnout. It is recommended for nurses to consult with leaders if they experience symptoms of burnout so that they can be treated and given a quick and appropriate solution according to the symptoms experienced.  

Background: Typically lasting six to eight weeks, the postpartum period is a time of recovery following childbirth. Afterpains are a type of discomfort that can be caused by uterine contractions during the involution process. Massage or other non-pharmacological treatment can be used to ease discomfort. Using specific techniques, massage can lessen or even eliminate pain. Methods: The cross-sectional design of the quantitative research design was used in this study. The objective was to compare how massage reduced postpartum pain in Cilacap City mothers before and after intervention. 30 postpartum mothers who were experiencing postpartum pain two hours later comprised the population. Saturation sampling was used for the sampling, and there were a total of 30 participants. The frequency distribution was used in univariate data analysis, while the paired-sample t-test was used in bivariate data analysis. For the pain scale, the paired-sample t-test analysis produced a t-value of 8.238. Results: As a result, the calculated t-value exceeded the critical t-value for a pain scale of 8.238 > 2.045, indicating acceptance of the alternative hypothesis (Ha) and rejection of the null hypothesis (Ho), indicating that massage is effective in reducing postpartum pain in women. Conclusion: massage has been shown to reduce postpartum pain in mothers.

Background: The use of smartphones among teenagers is increasing greatly among teenagers, especially in high school students, who are not only studying but also entering the world of industry. The definition of cell phone addiction or in other terms is smartphone addiction is one of the common forms of technology addiction. Smartphones are devices that can help someone establish broad social relationships via the internet and web technology. The aim of this research is to determine the level of addiction among teenagers using smartphones. Methods: This research uses a descriptive method with a quantitative approach. The sample in this research was 374 teenage students at SMK N 1 Denpasar. The measuring tool in this research uses a questionnaire in the form of a goggle form which is then processed using computer-based analysis software, namely SPSS, with a descriptive method. Results: In the research results, the number obtained from filling out the questionnaire was 374 respondents, with the age category found that most were in the 17-25 year old age category (late teens), namely 58% and in the gender category, the majority were male, namely 74.5%. Meanwhile, in the major category, the majority of categories were multimedia majors, 33.1%. Conclusion:  Based on research, most respondents have a level of addiction to using smartphones.

Material handling is a form of transportation or conveyance carried out in an industrial company environment. This activity involves moving raw materials, semi-finished goods, or finished goods from the location of origin to a predetermined location. One of the material handling is Doors operation which is located in the furnace machine section which functions as a gate to release a billet that has been heated. In Material Handling, especially in doors operation, an automatic control system using a Programmable Logic Controller is needed. The type of PLC used is the Siemens S7-300 PLC. With the method of observation (observation) in the field of all the equipment that is done and with the literature study can be known material handling control system, especially doors operation. From the results of research on material handling doors operation, it can be seen that this control aims as a gate to release a billet either by remote control or direct control, so that billets that have been heated to a temperature of 1200 degrees can come out effectively and will go to several stands to be printed. All stages in material handling, especially doors operation, can be monitored on the CCTV screen and HMI (Human Machine Interface).

Biogas is a potential renewable energy source to meet energy needs, especially in remote areas that do not have access to electricity. The process of making biogas is carried out through anaerobic fermentation of organic materials such as vegetable waste, livestock manure and agricultural waste. This research aims to design a batch type biodigester that can produce biogas from a mixture of goat manure, chicken manure and vegetable waste. Biodigester is a reactor used to produce biogas. The stirred biodigester aims to mix the substrate evenly in the biodigester and prevent the formation of scum. The biodigester designed has a capacity of 120 liters with a stirring system to increase the efficiency of biogas production. The fermentation process was carried out for 21 days by monitoring parameters such as temperature, pH, Chemical Oxygen Demand (COD), and methane gas concentration (CH4). The results showed that the temperature and pH in the biodigester remained in optimal conditions for the activity of methanogenic microorganisms. The highest CH4 concentration measurement was recorded on day 20 at 60%, which indicates good biogas quality. In addition, the flame test on day 21 produced a blue flame, indicating a high CH4 content. The decrease in CH4 concentration at the end of the study was caused by the exhaustion of organic material. This research contributes to the development of efficient and environmentally friendly biodigester technology to produce biogas as a renewable energy source.

Spentwash, a liquid waste byproduct of bioethanol production, is a potential raw material for biogas production due to its high organic content and abundant availability. PT Energi Agro Nusantara (ENERO) utilizes spentwash through anaerobic digestion processes to produce biogas, which is used as an alternative energy source.However, optimizing biogas production still faces various challenges, including the need for efficient monitoring and increased production volume. Internet of Things (IoT)-based technology offers a solution through real-time monitoring systems, enabling direct and accurate methane level measurements.This study aims to develop a prototype of a stirred digester equipped with an IoT-based methane gas detection sensor, using the MQ-2 sensor to detect methane gas.

Eco enzyme is a biocatalyst obtained from a fermentation process involving microorganisms, and has the potential to be applied in various environmental and industrial fields. This research aims to determine the optimum conditions for the volume of eco enzyme, determine the most influential variables between time and pH used during the eco enzyme fermentation process and the chemical characteristics of the eco enzyme product which was fermented for three months. Optimization method using the Central Composite Design – Response Surface Methodology (RSM) method. The comparison made in eco enzyme fermentation is water: organic waste: molasses = 10: 3: 1 = 5000 ml: 1500 gr: 500 gr. Fermentation for 3 months resulted in optimum conditions for making eco enzyme found at a reaction time of 96.213 and a pH of 5.207, with a maximum % yield of 10.24. The most influential variable in this research is pH. FTIR test results show the strongest absorption in the -OH (hydroxyl) group with alcohol properties at a wavelength of 3307.99 cm⁻¹, with a low transmittance of 48.2%. This group has antimicrobial properties that support the growth of good bacteria and other microbes.

Balerina Fashion faces the problem of waste in production process activities, which is caused by errors in pattern cutting, repetitive activities between production stages, and double work in the Quality Control (QC) division. This study aims to improve the efficiency of the production process by reducing waste using the Lean Manufacturing approach through the Value Stream Mapping (VSM) and Process Activity Mapping (PAM) methods. The results showed a significant increase in Value Adding (VA) time, from 56.00% to 84.88%. In contrast, Non-Value Adding (NVA) time decreased dramatically from 35.74% to 3.33%, while Necessary Non-Value Adding (NNVA) time increased slightly from 8.25% to 11.79%. These changes reflect productivity improvements and an increased focus on activities that provide direct value to customers. As a recommendation, the development of a new Standard Operating Procedure (SOP) is suggested to ensure each process runs according to standard. This SOP includes a detailed step-by-step guide for operators and QC, which was previously unavailable.

The learning process can proceed well if aided by the presence of teaching aids.Because the teaching aid for the electrical system of the motorcycle rear brake light was not available, this teaching aid was created.The purpose of this research is to determine: (1) the method of creating a teaching aid for the rear motorcycle brake light system, (2) the feasibility level of the teaching aid for the rear motorcycle brake light system, and (3) the students' response to the teaching aid for the rear motorcycle brake light system.This research uses a development research approach, also known as Research and Development (R&D). The Research and Development (R&D) method is a research method used to produce a specific product and test its effectiveness. This research will be conducted at SMK Negeri 1 Nisam. The implementation will be carried out in the even semester of the 2024/2025 academic year. This research and development uses 3 methods in data collection. The methods used are observation, questionnaires, and documentation. The data analysis technique used in this research is descriptive analysis, which presents the results of product development in the form of learning media, testing the validity and suitability of the product for implementation in the electrical system of motorcycle rear brake lights.The results of the research on the development of teaching media props, which have gone through several stages such as potential issues, data collection, product design, product validation, design revision, product testing, until it became a teaching media prop for the electrical system of the motorcycle brake light. The results obtained from the material expert validation were 91.31% by validator 1 and 95.13% by validator 2. The media expert validation results were 97.91% by validator 1 and 97.91% by validator 2. The results of the students' responses to the teaching aids, after calculations, showed a total response score of 506 out of 572 overall. With a final score percentage of 88.46% and the qualification of the developed teaching aids' response being in the "Very Good" category.

In the cracker production process at UMKM Kerupuk Subur, the process of drying crackers involves human labor so there is a risk of injury because when drying crackers, workers have to bend and squat. This study aims to determine the occupational dangers of workers during the drying process of crackers in UMKM Kerupuk Subur and provide recommendations for improvement. The method used to analyze body posture is Rapid Entire Body Assessment (REBA) then for improvement recommendations using an anthropometric approach with percentile calculations to determine dimensions as parameters for designing the work aids needed in the form of an ergonomic drying table. The results of REBA's analysis show a score of 9 with a high or high level, meaning there is a high risk of injury so immediate improvement is needed. The results of the design of an ergonomic drying table were then simulated through Inventor software which described the position of the worker's posture when carrying out cracker drying activities with a perpendicular working position. The results of the assessment of the working posture of the worker after the improvement showed a decrease in the risk level from medium to low and negligible.

This community service program aims to equip students with knowledge and skills relevant to facing the challenges of the digital workforce. The activity was attended by 40 students, with materials covering four main topics: Understanding the Digital Era Workforce, Key Soft Skills for the Digital Era, Building Competencies for the Digital Workforce, and Preparing for Career Success. In addition, participants were guided in creating an individual Action Plan to prepare themselves for career success in the future. The methods used in this program included material presentations, interactive discussions, and the development of personal action plans, aiming to enhance both technical and non-technical skills needed in the digital workforce. Evaluation results show that 75% of students rated the material as excellent, 20% as good, and 5% found it somewhat beneficial. This indicates the program’s success in providing significant value to participants. This program is expected to enhance students' readiness to enter the increasingly digital and technology-driven job market, while providing valuable insights for planning and developing their careers. Moving forward, this activity can serve as a model for developing more effective community service programs that align with the needs of the modern workforce.

The training titled "Innovative Studentpreneur: Integrating Design Thinking into the Business World" is designed as a solution to enhance students' entrepreneurial competencies through creative and innovative approaches. This training focuses on providing an in-depth understanding of the principles of design thinking to create business ideas that are both solution-oriented and sustainable, thus fostering the development of competitive ventures. The target participants of this training are final-year students from the Faculty of Economics at Universitas Nasional PASIM Bandung, located at Jalan Dakota No. 8A, Bandung. This training aligns with the vision and mission of both the university and the faculty, which aim to produce graduates capable of creating businesses and becoming studentpreneurs. The training is designed to be engaging and interactive by combining various methods such as discussions, simulations, and lectures to enhance participant involvement. Based on the implementation of this Community Service (Abdimas) activity, it can be concluded that the event met the needs of the partner, Universitas Nasional Pasim, and that the material presented was well understood by the participants. However, for future Abdimas activities, it is recommended to focus on more technical training, such as the utilization of artificial intelligence (AI), data analysis techniques, and the use of Microsoft Office, especially Excel. This training is expected to continue supporting the development of students' skills and their relevance to the demands of the workforce.

Mastery of technology positively impacts the competitiveness of MSMEs, but there are still MSMEs who do not master technology. This community service activity aims to provide Canva training to optimize digital marketing for MSMEs. 25 MSMEs attended the training. The training consisted of four sessions @ 45 minutes. The training method was in the form of lectures, questions and answers and practice. Participants were measured for their knowledge and skills regarding promotion, marketing communications, and the Canva application before and after training. The level of knowledge and skills was then analyzed using Mann-Whitney U. The study results showed that Canva training for MSMEs succeeded in increasing the knowledge and skills of participants using the application to design attractive promotional media. MSMEs need to apply the ability to use Canva to optimize digital marketing so that their products have competitive competitiveness.

This seminar entitled “The Important Role of Facebook Ads as a Marketing Strategy for MA Darul Arqam Students”, was attended by 32 participants consisting of XII social studies students. The purpose of the seminar was to increase students' understanding of the use of Facebook Ads as an effective marketing tool in business. Problems faced by students include a lack of knowledge about digital marketing and limited access to information regarding marketing strategies. Many students do not understand how to optimally use social media such as Facebook Ads for promotion. The benefits of this seminar include an increased understanding of students in managing digital ads and an understanding of market segmentation. By utilizing Facebook Ads, students are expected to implement modern and efficient marketing strategies, increasing competitiveness in the business world. In addition, the knowledge gained can be used to promote their school products or independent businesses in the future, making them better prepared to face challenges in the digital era.

This research analyzes the influence of testimonials on purchasing decisions at the Tiktok Shop using qualitative methods through interviews with 30 respondents. It can be concluded that testimonials play an important role in influencing purchasing decisions. Respondents tend to choose testimonials that are informative, descriptive and do not give the impression of exaggerating, the time spent also influences purchasing decisions. The results of this research confirm that authentic and genuine testimonials can be used as an effective marketing tool to attract attention and increase buyers' trust in a product.    

One of the indicators based on the Sustainable Development Goals (SDGs 2030) is to support welfare and ensure a healthy life for all at all ages with the most important point being to reduce maternal mortality to less than 70 per 100,000 live births and prevent neonatal and toddler mortality rates of at least 12 per 1000 live births and 25 per 1000 live births in toddlers. A study was conducted to determine the effect of giving red guava juice on changes in hemoglobin levels in pregnant women in the third trimester at PMB Debby Deliserdang in 2022. In this study, the sample used was all pregnant women in the third trimester in March to May 2022, totaling 12 people. The study showed that in the intervention group before giving red guava juice, the majority had moderate anemia with a frequency of 8 respondents (66.7%) and a minority were normal with a frequency of 1 respondent (8.3%). Meanwhile, after giving red guava juice, the majority were normal with a frequency of 7 respondents (53.8%) and a minority of moderate anemia as much as 1 respondent (8.3%). The results of the analysis test in this study using Mann Whithney showed a P-Value of 0.022 (P <0.05), namely that there is an effect of giving red guava juice on increasing hemoglobin in pregnant women in the second trimester. Pregnant women, especially pregnant women who experience anemia, are expected to routinely consume red guava juice because if consumed properly, red guava juice has many benefits, especially for pregnant women so that it can meet the nutritional needs required by the body and can maximize iron absorption.