Publication Search

Building fires can significantly degrade the strength and integrity of steel structures, so post-incident evaluation is crucial to ensure building safety and feasibility. This study aims to evaluate the condition of the steel tower structure after the fire through a visual inspection method. A total of 35 structural elements were examined, including columns, beams, and bracing, to identify damage caused by heat exposure. The inspection results showed that 6 elements (17%) were in the category of Acceptable, 8 elements (23%) Needs Attention, 5 elements (14%) Not Acceptable, and 1 element (3%) Not Applicable because they had been removed. Steel columns generally remain upright without deformation, but suffer damage to the protective layer (coating). In contrast, most blocks lose their protective layers, are directly exposed to fire, show early signs of corrosion, and some suffer severe damage such as flange tears and cuts. These findings confirm the importance of systematic documentation and classification of element conditions as the basis for technical decision-making for structural improvement. Visual inspection proved effective as an initial step in the evaluation process, providing a relevant initial picture of the extent of damage and the need for intervention. This study recommends follow-up in the form of advanced structural analysis and material testing to ensure the feasibility of reusing the affected steel elements.

This community service project sought to investigate the significance of community oversight in village fund management, focusing on Belabaja Village. Socialization and observational activities revealed a low level of community participation in monitoring the management of village funds. Factors contributing to this low participation include limited public awareness, inadequate socialization efforts by the village government, community members' busy schedules, and a lack of strong relationships between village officials and the community. Despite these challenges, community oversight remains essential for ensuring transparency and accountability in the utilization of village funds. The study concludes that there is a need to enhance public awareness of the importance of oversight and to foster stronger partnerships between village governments and the community to achieve sustainable development objectives.

For the Langa indigenous people, Waja is a process of recovery for mistakes because someone has violated a prohibition or certain customary law norms that apply in the Langa indigenous people. There are several marriage problems that occur in the Langa community that are not resolved with waja. The practice of waja serves to break the bond of engagement or marriage that has occurred between a man and a woman, the purpose is as a deterrent effect and also as a means of value education for the community so that marriages that violate customary norms can be eliminated or no longer repeated. This research is an empirical research, so the data source used is the primary data source, the primary data is obtained from the results of interviews. The data were analyzed in a descriptive-qualitative manner. The results of this study show that: (1) The function of waja customs in the marriage legal system of the Langa indigenous people is for the enforcement of customary norms and rules, the restoration of good name, efforts to break the bond of engagement or marriage between men and women and to realize justice and balance in community life, including in terms of marriage. (2) The process of applying waja customs in the practice of marriage of the Langa indigenous people is carried out in accordance with the marriage violations that have been carried out by both parties. The types of violations of waja customs are infidelity, relationships that are not approved by parents and abusive behavior of husbands towards wives.

For the Langa indigenous people, Waja is a process of recovery for mistakes because someone has violated a prohibition or certain customary law norms that apply in the Langa indigenous people. There are several marriage problems that occur in the Langa community that are not resolved with waja. The practice of waja serves to break the bond of engagement or marriage that has occurred between a man and a woman, the purpose is as a deterrent effect and also as a means of value education for the community so that marriages that violate customary norms can be eliminated or no longer repeated. This research is an empirical research, so the data source used is the primary data source, the primary data is obtained from the results of interviews. The data were analyzed in a descriptive-qualitative manner. The results of this study show that: (1) The function of waja customs in the marriage legal system of the Langa indigenous people is for the enforcement of customary norms and rules, the restoration of good name, efforts to break the bond of engagement or marriage between men and women and to realize justice and balance in community life, including in terms of marriage. (2) The process of applying waja customs in the practice of marriage of the Langa indigenous people is carried out in accordance with the marriage violations that have been carried out by both parties. The types of violations of waja customs are infidelity, relationships that are not approved by parents and abusive behavior of husbands towards wives.  

Internet users in the use of information have given rise to two opposite sides, where on the one hand it is easier in terms of access and utilization of information, while on the other hand it causes various kinds of illegal acts, one of which is copyright infringement in the form of film piracy which is currently inserted through illegal streaming sites resulting in losses for the creators of cinematographic works. This of course violates the ITE Law and the Joint Regulation of the Minister of Law and Human Rights and the Minister of Communication and Informatics concerning the Implementation of Content Closure and/or User Access Rights, Copyright Infringement and/or Related Rights in Electronic Systems. This research is a normative juridical research using a legislative and conceptual approach, using legal materials from literature and the internet as a source of legal materials. The results of the study show: (1) The form of legal protection for the creators of cinematographic works in film piracy on illegal streaming sites is reviewed from the ITE Law in a preventive manner regulated in Articles 23-25, Article 25, Article 32 paragraphs (1) and (2) of the ITE Law and has been repressively regulated in Article 48 paragraphs (1) and (2) of the ITE Law and the Joint Regulation of the Minister of Law and Human Rights & the Minister of Communication and Information related to Content Closure. (2) The effectiveness of the legal protection provided by the government to the creators of cinematographic works in the piracy of films on illegal streaming sites provided by the government through the ITE Law and the Joint Regulation of the Minister of Law and Human Rights and the Minister of Communication and Informatics related to site blocking cannot be said to be effective until now because the legal factor itself has not sufficiently accommodated the protection of creators clearly in the event of film piracy on illegal streaming sites.

Penelitian ini bertujuan untuk menganalisis kemampuan penetrasi dua jenis proyektil, yaitu WC-6Co dan baja standar Pindad, terhadap pelat baja Armox 500T, yang dikenal memiliki ketahanan tinggi dan digunakan dalam aplikasi pertahanan. Simulasi dilakukan menggunakan perangkat lunak ANSYS Student dengan pendekatan eksplisit dinamik untuk mengevaluasi total kecepatan dan deformasi selama tumbukan proyektil pada pelat. Proyektil WC-6Co menunjukkan kemampuan penetrasi yang signifikan, menembus pelat Armox 500T dengan kecepatan maksimum mencapai 1063,4 m/s, serta menghasilkan deformasi maksimum 3,1779 meter. Sebaliknya, proyektil baja standar Pindad hanya menghasilkan deformasi lokal tanpa penetrasi, dengan kecepatan maksimum 1347,7 m/s dan deformasi maksimum 4,0253 meter. Hasil ini menunjukkan bahwa proyektil berbasis WC-6Co lebih efektif dalam menembus pelat baja Armox 500T dibandingkan dengan proyektil baja Pindad, memberikan wawasan penting bagi pengembangan sistem pertahanan dan pilihan material pelindung.  

A pressure vessel is a closed container that stores pressurized liquids or gases. Low-carbon steel is used as a material for pressure vessels that operate at low to moderate temperatures. One of the important aspects of manufacturing pressure vessels is the welding process. The welded area tends to be the weakest point due to exposure to high heat, which can lead to greater residual stress and potentially cause cracking. This study aims to evaluate the effect of variation in ample angle and current strength on mechanical properties, especially tensile strength, and hardness, to determine the optimal amplitude angle and current strength. The research method applied is an experiment by conducting SMAW welding on SS400 steel using E7016 electrodes, with a single V ample angle variation of 55°, 60°, 65°, and strong welding current of 110 A, 120 A, and 130 A, then a tensile test and hardness test are carried out. The results show that the tensile strength of the raw material is 481.2  with a hardness of 191.95 HVN. For the variation of the amputation angle, the highest tensile strength value was recorded at an angle of 55°, which was 567.471 N/mm2 , while the lowest was at an angle of 65°, which was 559.997 N/mm2 . The highest hardness value at a 65° angle reached 328.422 HVN, while the lowest at a 55° angle was 312.878 HVN. In terms of current strength variation, the highest tensile strength is obtained at 130 A which is 568.421 N/mm2 and the lowest at 110 A is 552.339 N/mm2 . The highest hardness value is found at a current strength of 110 A, which is 343.411 HVN, and the lowest at a current strength of 130 A, which is 295.122 HVN. The optimal parameters were found at a yield angle of 55° with a tensile strength of 567.471 N/mm2 and a hardness of 312.8 HVN and a current strength of 130 A with a tensile strength of 568.421 N/mm2 and a hardness of 295.1 HVN.

Politeness, for Javanese people is very important. Javanese culture highly upholds politeness or Eastern customs. A person's manners can be seen and assessed from their behavior (patrap) and speech (subasita/unggah-ungguh). So there is a proverb that says "Ajining raga tumata ing busana, ajining dhiri gumantung kedaling lathi", this expression implies that whether someone is good or not can be assessed from the way they dress and speak. Along with the development of the era of globalization today, Javanese cultural values ​​are increasingly being degraded. . The younger generation who are reluctant to apply the manners of Javanese language which are considered complicated, they also have difficulty using polite and respectful language (ragam krama). The reason is that manners are considered difficult so that they (especially young people today) are afraid that if they apply the correct manners incorrectly, they will be considered impolite or arrogant; the second reason is that Javanese language (ungguh-ungguh) is perceived as not bringing progress to their future ideals. Thus, socialization of Javanese politeness was held for elementary school students, with the aim of improving students' character and instilling politeness from an early age. Socialization was carried out for students in grades 5 and 6 at SDN 01 Kayumas and SDN 02 Kayumas. The delivery of simple materials and direct practice made it easier for students to understand the politeness material.

The objectives of this research are: (1) To produce an e-module accounting module to improve the learning achievement of SMAS Regina Pacis Bajawa students. (2) Examining the feasibility of accounting e-modules to improve the learning achievement of SMAS Regina Pacis Bajawa students. (3) Examining the effectiveness of the accounting e-module in improving the learning achievement of SMAS Regina Pacis Bajawa students.This type of research is research and development research with the ADDIE model. With an experimental trial design using a pre-test – post-test model. The test subjects in this research were class XI IPS D SMAS Rergina Pacis Bajawa. Product suitability is tested by media experts, material experts, learning practitioners, namely teachers, and media users, namely students. Data collection was carried out using observation, interviews, questionnaires and tests. The data collection instruments used were interview guides, expert validation questionnaires, teacher response questionnaires, student response questionnaires, and accounting questions as an information system. Development products are assessed based on the appropriateness of media design and learning materials. The feasibility of the resulting learning media was analyzed using a conversion of 4 eligibility criteria, namely very good, good, poor and very poor.Results of the research (1) An accounting e-module with a book creator has been developed to improve student learning achievement. (2) The accounting e-module with book creator was assessed in the very appropriate category by media experts with a score of 91.66%, a score of 84.61% in the very appropriate category from material experts, a score of 100% in the very appropriate category from teachers and a score of 87 .14% in the very feasible category was obtained from student assessments. (3) E-module accounting module with book creator can improve the learning achievement of Regina Pacis Bajawa High School students. It can be seen that there is an increase in the average student score from the pretest of 57.18 to 85.78 in the posttest.

The purpose of writing this article is to analyze and understand how the law protects against software copyright infringement so that later we can find out how the law enforcement process works according to positive law in Indonesia. This research uses normative research methods as a reference in analyzing problems based on a statutory approach. The results obtained from this research are that software is a work that is protected by law so that anyone who violates these provisions can be subject to sanctions. Law enforcement proceedings can be filed based on civil proceedings or criminal proceedings and can be carried out in three ways of resolution, namely through alternative settlements, arbitration mediation bodies, or with commercial courts through Intellectual Property Rights.

The objectives of this research are: (1) To produce an e-module accounting module to improve the learning achievement of SMAS Regina Pacis Bajawa students. (2) Examining the feasibility of accounting e-modules to improve the learning achievement of SMAS Regina Pacis Bajawa students. (3) Examining the effectiveness of the accounting e-module in improving the learning achievement of SMAS Regina Pacis Bajawa students.This type of research is research and development research with the ADDIE model. With an experimental trial design using a pre-test – post-test model. The test subjects in this research were class XI IPS D SMAS Rergina Pacis Bajawa. Product suitability is tested by media experts, material experts, learning practitioners, namely teachers, and media users, namely students. Data collection was carried out using observation, interviews, questionnaires and tests. The data collection instruments used were interview guides, expert validation questionnaires, teacher response questionnaires, student response questionnaires, and accounting questions as an information system. Development products are assessed based on the appropriateness of media design and learning materials. The feasibility of the resulting learning media was analyzed using a conversion of 4 eligibility criteria, namely very good, good, poor and very poor.Results of the research (1) An accounting e-module with a book creator has been developed to improve student learning achievement. (2) The accounting e-module with book creator was assessed in the very appropriate category by media experts with a score of 91.66%, a score of 84.61% in the very appropriate category from material experts, a score of 100% in the very appropriate category from teachers and a score of 87 .14% in the very feasible category was obtained from student assessments. (3) E-module accounting module with book creator can improve the learning achievement of Regina Pacis Bajawa High School students. It can be seen that there is an increase in the average student score from the pretest of 57.18 to 85.78 in the posttest.

Selection of suppliers is a critical aspect that requires serious attention from every company, as it not only impacts the improvement of the supply chain quality but also affects the quality of the products produced. The current issue faced by PT Ciptaunggul Karya Abadi in the supplier selection process involves conducting direct surveys to several suppliers and comparing prices, which results in delivery delays and subsequent production delays. This situation forces PT Ciptaunggul Karya Abadi to find alternative suppliers unexpectedly. This research employs the Analytical Network Process (ANP) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) methods in the supplier selection process at PT Ciptaunggul Karya Abadi. The objective of this study is to combine the ANP and TOPSIS methods to enhance the accuracy of decision-making in supplier selection. The results of this research identified four criteria and 12 sub-criteria, and the prioritized ranking of the best suppliers for PT Ciptaunggul Karya Abadi shows that PT Baja Kencana Sakti ranks the highest with a preference value of 0.56693, followed by PT Stilmetindo Prima with a preference value of 0.44565, and PT Fujimaki Steel with a preference value of 0.39298.

The Kediri Airport development project encountered challenges related to underground ducting work. The design of Kediri Airport adheres to international standards, which led to the use of materials not readily available in Indonesia, specifically pipes and duct spacers. Duct spacers are tools used to arrange ducting pipes according to their formation and prevent them from floating during concrete pouring due to buoyancy. The SKEP/114/VI/2002 serves as a reference for underground cable installation, involving direct burial of cables at a depth of 70 cm, covered with a 5 cm layer of sand above the cable surface. These two approaches significantly differ, necessitating problem-solving solutions. To address this issue, research was conducted to find suitable duct spacers in Indonesia. Two alternative materials were considered: PVC and lightweight hollow steel. The study compared costs and time associated with these materials. PVC duct spacers would be imported and be fabricated in Indonesia, while hollow steel duct spacers would be fabricated on-site. The research focused on three aspects: ducting work methods, duct spacer design, and cost-time analysis. Given tight installation spaces and busy schedules, duct spacers needed to be compact, simple, and adaptable to various pipe formations. The design for hollow steel duct spacers aimed for simplicity to reduce on-site construction work. However, care was taken to avoid potential injuries from exposed bolts on the hollow steel frame. The PVC duct spacer design utilized Polytam PF 1000 material, with a nominal shear strength of 399 kg and a nominal moment of 266 kg·cm—sufficient to withstand saturated soil loads up to 162 cm but not vehicular loads. Analyzing procurement time, PVC duct spacers from Indonesian manufacturers were the quickest, taking only 56 days due to no port clearance delays. The fastest completion time for the project was achieved using PVC duct spacers, taking 122 seconds—three times faster than hollow steel duct spacers. While lightweight steel was the most cost-effective option for on-site procurement, combining cost and time analysis favored PVC duct spacers. The minimal cost difference allowed for accelerated production, minimizing the risk of delays    

The study titled "The Influence of System and Service Quality on User Satisfaction of Silalapbaja Website" aims to evaluate the impact of each independent variable on the dependent variable. There were 51 respondents involved in this research, with data analysis conducted using SPSS version 25. The results indicate that System and Service Quality significantly influence User Satisfaction, as evidenced by the significant value of Fhitung = 0.000 < 0.05. From the t-test, System and Service Quality variables partially affect User Satisfaction, while Information Quality does not have a significant partial effect. For instance, the significant values of thitung X1 = 0.000 < 0.05 and X3 = 0.49 < 0.05, whereas X2 = 0.094 > 0.05. The variables that significantly influence are System Quality with a Standardized Coefficients Beta of 0.552 and Service Quality of 0.220. Based on the research findings, it can be concluded that System, Information, and Service Quality contribute to 59% of User Satisfaction, while other factors beyond this study affect 41%. Therefore, it is recommended for the developers of the Silalapbaja Website to prioritize improvements in System and Service Quality to enhance User Satisfaction.

In order to better understand the complex links between infrastructure development, education, tourism, agriculture, and regional economic growth in Indonesia, this study uses structural equation modeling with partial least squares, or SEM-PLS. The research makes use of a 287-observation dataset and applies rigorous measurement model evaluation, bootstrapping analysis, structural model estimation, and model validation against multiple fit indices. The results show a strong positive correlation between each sector—agriculture, tourism, education, and infrastructure development—and regional economic expansion. The necessity for comprehensive, integrated development strategies is highlighted by the interconnectedness of these interactions. In order to promote balanced and resilient regional economic growth, the findings provide policymakers with useful insights and highlight the significance of ongoing investments in infrastructure, education, and sustainable tourism and agricultural practices.    

The development of information technology today is very rapid, which has a positive and negative impact on law enforcement regarding song copyright which is regulated in Law number 28 of 2014 concerning Copyright. The positive impact is that the flow of any information becomes fast, making it easier to access the latest information also related to the internet which makes it easier to buy original songs/music through online shopping facilities and playing music online on Spotify. Meanwhile, the negative impact is that there are more and more illegal song download links in cyberspace, which also makes it easier to pirate sound recordings in the real world. This research method uses a normative juridical library research method, namely research that refers to legal norms contained in statutory regulations, literature, expert opinions and papers. The result of this study is Copyright protection for creators which has been regulated in the regulations currently in force.

The purpose of this journal article is to provide research findings regarding the application of automated production control system theory to the construction industry. from expediting work processes. The method used in this research is to observe the production process of a Primalland light steel construction company in real time. Please note, raw materials can be obtained from literature studies, with a focus on their implementation in industrial processes. There are many challenges in the development sector in Indonesia, both in terms of quality and quantity, PT. PrimaLand Light Steel Frame was founded on December 25 2008 in Pandeglang. Based on the research that has been carried out, the data obtained from this research is then analyzed in detail to determine whether there is a significant difference between price changes that affect sales volume and price changes that affect sales volume. Research on sales volume at PT PrimaLand Pandeglang between 2014 - 2016. PrimaLand light steel tries as best as possible to maintain the quality of the roof truss profile produced by using high quality steel coils, or what can be called High Tension, namely with a yield strength range of Mega Pascal 400 Mpa – 500 Mpa and generally standard G550, or reaching 2x the strength from conventional melted steel which is more than 240 Mpa.

This study aimed to investigate the physiological impact of academic stress, particularly examination stress, on biochemical indices among college students at the University of Tikrit. A total of 60 healthy students (30 in an experimental group and 30 in a control group) aged 19-21 years participated in this cross-sectional study. Salivary samples were collected during pre-examination and post-examination periods to measure levels of cortisol, malondialdehyde (MDA), glucose, and total antioxidant capacity (TAC). The results indicated significant increases in cortisol, MDA, and glucose levels in the pre-examination period compared to the post-examination period, suggesting heightened stress responses. Conversely, TAC levels were significantly higher in the post-examination period, indicating a potential recovery or response to oxidative stress. The findings support the hypothesis that academic examinations can induce significant physiological stress in students, reflected by changes in salivary biochemical markers. These stress responses may influence overall student health and academic performance, suggesting the need for strategies to manage stress among students during examinations.

This research is conducted with the aim of discussing and analyzing answers to problems such as the forms of actions that can be categorized as criminal acts of film piracy and the qualifications of criminal acts of film piracy on TikTok social media and how criminal liability for acts of film piracy in the TikTok application with regard to positive law in Indonesia. This research method is normative juridical method. Normative juridical method is a legal research method that focuses on library materials or secondary materials. With the approach used by researchers is a statutory approach and a conceptual approach. Based on the results of the research, benefits were obtained. The benefits obtained can be seen from the increase in likes and followers. Then the researcher also concluded that the act of piracy is categorized as a qualified offense with criminal aggravation which is included in the category of voorgezete handelings. In overcoming the existing problems, researchers argue that Tiktok also needs to be held accountable considering the losses caused are not small. However, researchers found that the legislation, especially Law Number 28 of 2014 concerning Copyright, does not separate sanctions for individuals and corporations. According to the author, there needs to be a separation of sanctions because the comparison of losses caused by actions taken by individuals and those taken by corporations is different.

Indonesia menghentikan ekspor nikel kadar rendah  melalui  Peraturan Menteri Energi dan Sumber Daya Mineral  No. 11 Tahun 2019 (Permen ESDM 11/2019) terkait perubahan kedua atas Peraturan Menteri Energi  dan Sumber Daya Mineral, pada tanggal 25 Desember 2018 mengenai pengoperasian tambang mineral dan batubara per  31 Desember 2019, Uni  Eropa sebagai salah satu importir nikel dari Indonesia menyatakan tidak setuju dengan pasal  dan mengajukan gugatan. Uni Eropa telah mengajukan keluhan ke Organisasi Perdagangan Dunia (WTO) atas larangan ekspor nikel  Indonesia. Uni Eropa menyatakan bahwa nikel yang diimpor dari Indonesia biasa digunakan oleh Uni Eropa  sebagai bahan baku industri baja tahan karat Eropa. Uni Eropa menuduh bahwa pembatasan tersebut dirancang oleh Indonesia untuk menguntungkan industri baja tahan karat dan pengecorannya. Adapun identifikasi masalah dengan bagaimana dampak terkait kasus larangan ekspor nikel terhadap hubungan perdagangan antara indonesia dan uni eropa dan apa alasan terkait kebijakan pembatasan ekspor nikel yang diterapkan pemerintah indonesia. Larangan ekspor nikel yang diberlakukan pemerintah Indonesia berdampak besar pada hubungan perdagangan antara Indonesia dan Uni Eropa. Uni Eropa,  konsumen  bijih nikel terbesar di dunia, telah mengambil tindakan hukum dan mengajukan gugatan terhadap Indonesia di Organisasi Perdagangan Dunia (WTO). Peristiwa tersebut telah menimbulkan ketegangan  hubungan dagang dan penyelesaiannya bergantung pada keputusan WTO. Pemerintah Indonesia menerapkan kebijakan pembatasan ekspor nikel karena berbagai alasan, antara lain meningkatkan nilai tambah tambang nikel, melindungi sumber daya alam, dan mendiversifikasi perekonomian. Keputusan tersebut juga berkaitan dengan upaya menjaga keseimbangan  perdagangan internasional dan mendorong praktik pertambangan yang lebih ramah lingkungan.