Publication Search

The purpose of this research is to determine the influence of learning motivation and style in learning on learning outcomes. The type of research that will be carried out is using quantitative research methods with descriptive analysis. Data collection was carried out through a questionnaire which was measured using a Likert scale from one to five for 100 respondents with the criteria being students aged 18-22 years. The data analysis technique that will be used in this research is the Outer Model with calculations of Convergent Reliability, Discriminant Validity, Composite Reliability, Cronbach's Alpha and Inner Model with T statistics, R-Square and VIF calculations using SmartPLS 4 tools. The results of the research show that learning motivation influences learning achievement because of the accuracy factor in collecting assignments, this has high motivation. Learning style has no effect on learning achievement because it is caused by the very minimal study time that students spend. Apart from that, learning motivation and learning style together influence student learning achievement.    

The development of welding technology in this era took place rapidly, especially in the sector of new ship building and ship construction repair. Incorrect welding activities often cause delays which cause costs, time and consumables losses. In order to develop the speed and efficiency of the welding work, it is mandatory to determine a welding method that is suitable for the site conditions. This study provides a choice of three welding methods consisting of the SMAW and FCAW welding methods based on their strength and economic value. To strengthen the results of welding can be tested with a destructive test consisting of a tensile test, bending test and impact test. Next, the calculation of the welding cost per kg, welding speed per meter and electrode consumption is carried out to find out the difference in the economic value of all the welding materials. When tested, it was found that there was no difference in tensile strength between SMAW and FCAW. Welding method, maximum 1%, but SMAW welding method has 4% better yield strength than FCAW welding method. The ductility value of the FCAW welding method is 34% better than the SMAW welding method. The FCAW welding method has 67% better economic value when compared to the SMAW welding method. The FCAW welding method has a speed of 72% better than the SMAW welding method, and the FCAW welding method is 50% more efficient than the SMAW welding method.

The branch of mathematics that studies history is usually known as ethnomathematics, and the concept of ethnomathematics has made a major contribution to improving mathematics learning. It turns out that many cultures cannot be separated from mathematical calculations, including historical buildings that are simple but have many meanings and meanings. So this research was conducted to describe and identify mathematical concepts in Betawi Warehouses in the Setu Babakan Betawi Cultural Village. The research method used is a descriptive qualitative method with an ethnographic approach. The results of the research show that there is a mathematical concept in the Gudang Betawi house building in the Setu Babakan Betawi Cultural Village, namely the shape of the Gudang Betawi house which has a rectangular pattern from front to back, there are many philosophies in ornaments that have sizes and shapes, and there are geometric elements found in the building. Betawi Warehouse Houses are like whole numbers in measuring activities, equivalent comparisons in calculating the length of time to build a Warehouse House, there are corners in the building, there are flat geometric elements found in the length, area and perimeter of the building, there is also space geometry which has content and volume , there is a geometric transformation in the ornamental part of the Gudang Betawi house, and there is a congruence of flat shapes that can be seen on the door of the Gudang Betawi house.

Financial performance is a form of achievement on the results of management's work to achieve the company's goals in conducting an assessment by measuring financial ratios periodically the company's operational activities according to the criteria approved by the company. This study uses common size analysis which is a financial statement calculation technique to be simpler generally in the form of horizontal and vertical analysis, so as to show the relationship and trend of the company's financial position. This study aims to determine the circumstances, conditions and financial proportions in more detail of the company under study. The study was conducted descriptively with a comparative approach by processing secondary data in the form of company financial statements. The object of research is a food and beverage company listed on the IDX, namely PT. Mayora Indah Tbk and its competitor, PT. Indofood CBP Sukses Makmur Tbk and PT. Siantar Top Tbk. Sampling was taken with a research period of 7 years, from 2015 to 2021 and found as many as 21 financial data. The method used is Common size analysis. The results obtained are financial management in terms of liquidity is mostly done by PT. Indofood CBP Sukses Makmur which is offset by assets that also increase is reflected in the management balance sheet report showing optimal management with stable sales over time, PT. Mayora Indah Tbk transfers a lot of funds to the company's assets and equity, but in a pandemic situation, management still has difficulty managing funds so that operating profit has decreased, while PT. Siantar Top Tbk shows a unique pattern of liabilities with debt rising and falling from year to year based on profit appears very sharp decline in addition the company has a proportion of funds that mostly go to sales expenses compared to other account components.

The purpose of this study was to find out and analyze the calculation of the use of raw materials in Asep Embordir, the advantages of Asep Embordir before using the Linear Program and the advantages of Asep Embordir after using the Linear Program to increase maximum profit. The method used in this research is a survey method. With a descriptive analysis approach. The data used are data from interviews and direct observations during April 2022 regarding raw materials for making apparel, labor wage costs, and profits and production time. The existing problems are then formulated using the linear programming method and solved using the simplex method. The results showed that the use of raw materials in Rmfcollectionembroidery for cloth was 45 wood, buttons (27.8) packs, thread 9 rolls) and collar hardener (162 meters). The optimal production quantity for all production variations according to the company's production capacity is 540 pcs, while for KDLP the optimal production is 60 pcs. RMFCollectionembroidery profit from the selling price of Rp. 35,000/pcs, the total profit from KDLP is Rp. 2,100,000, this can be representative of the profit from the production of other clothing sizes. Based on the results of research studies, it is suggested that for the future, if asep border will increase the amount of production, companies need to take into account development costs and need to further analyze the use of all existing production capacity so that production can be carried out optimally.

Degenerative disease is a health condition of an organ or related tissue whose condition can deteriorate over time due to changes in body cells that affect organ function as a whole. The factor is due to unhealthy life changes such as lack of activity and frequent exposure to harmful substances into the body. Degenerative diseases include hypertension, diabetes, cholesterol, cancer, and death. Harmful substances or free radicals can be inhibited by antioxidants. One drug that has antioxidant activity is ascorbic acid (Vitamin C) which functions as an immune booster and is used by the public because it is effective as an antioxidant and health therapy but there are side effects in the form of gastrointestinal. The research aimed to find candidate drug ingredients from compounds contained in black pepper seeds (Piper nigrum L.) as in silico antioxidants. The methods used are molecular docking and molecular dynamics. The results showed BLH19 had better toxicity than the comparator drug and had hydrogen interactions that could be stabilized by the amino acid Gln139. The results of molecular dynamic calculations for BLH19 have an RMSD value of 1.5 Å with a ΔGTotal of -33.50 Kcal/mol. While the comparator drug has an RMSD value of 1.6 Å with ΔGTotal -3.39 Kcal/mol. The results showed that the affinity level of ascorbic acid compared to BLH19 for the 4RP9 receptor was predicted to be a candidate for a new antioxidant drug.

The Revitalization Development of the Leles People's Market Building Phase III is a government development project overseen by the Garut Regency DISPERINDAG. The construction of this market building began in mid-2021 and was planned to be completed within 120 days of the project plan, however, there were obstacles that resulted in the realization of the construction process requiring additional time to complete the construction. The method used in this study is the Fault Tree Analysis (FTA) method, the purpose of which is to find the fault tree of various errors that will result in the occurrence of unwanted events and the Event Tree Analysis (ETA) method is used to estimate and assess the probability of each consequence. can arise from an event in anticipation of its various consequences. This research methodology uses the concepts used in the survey using questionnaires and interviews with informants/respondents involved in the Catfish Market Revitalization project. There are two main intermediate events that cause delays in the development of the Revitalization of the Leles Garut People's Market, namely structural work / architectural work and work on the completion of side buildings. The result of identifying the total value of the minimum cut set combination probability for the Top Event of 0.9998 is the overall result of the total combination calculation of the minimum cut set. The results of the Initiating scenario impact analysis which has a "High" risk level caused by the Owner due to Rework work in the field, Changes to work plans, Delays in project work targets, There is some work that requires additional working hours.

. In the shipbuilding industry, the repair process is a series of jobs that require a relatively short time. Delays in repairs can occur due to weak management and also caused by less than optimal empowerment of human resources. This study aims to identify the risks found in four divisions, namely the Production Division, Warehouse Division, Finance Division and Purchasing Division. The study found 31 risk events. Determining the value of each risk is carried out using the Failure Mode and Effect Analysis method. There were 13 risks that had the highest Risk Priority Number, namely the length of approval for requests for goods (RPN = 522.88), delays in payment processes by customers (RPN = 504.64), requests for additional work from the owner (RPN = 477.128), fluctuations in the number of manpower (RPN = 454.08), Changes in material use related to the availability of materials in the warehouse (RPN = 411.768), Changes in material calculations related to design (RPN = 389.017), Length of decision making by the owner (RPN = 388.36), Long material delivery process (RPN = 388.36), Insufficient stock material (RPN = 357,588), Writing the amount on the Request for Goods Bill is not detailed (RPN = 357.71), Lack of availability of stock material (RPN = 349,524), Making and submitting late payment requests (RPN = 316.8), Placement of materials that are less efficient (RPN = 296.8) Risk mitigation is carried out using the Fault Tree Analysis method to find the main cause / basic event of each risk. And the mitigation step that needs to be done is by making changes to the warehouse layout. If the layout design of the warehouse is changed to be more efficient it will speed up the material retrieval process which has an impact on the ship repair process time.

Introduction: Nutritional status is a balance between a worker's nutrient intake and better endurance. Nutritional status is one aspect of occupational health that has an important role in terms of work productivity. The nutritional intake of workers will be directly proportional to the nutritional status of the worker which can be translated through a normal Body Mass Index (BMI) in the range of 18.5 to 25. Work productivity is the ability of a person or group of people to produce goods or services. Increasing work productivity is required so that the employees can have more efficient, effective, and productive performance. Objective: The purpose of this study was to describe nutritional status in workers at the PT. Bina Sukses Lestari. Methods: This study uses observational (non experimental) method with semi quantitative approach. Data  is  obtained  directly  and  virtually  through  interview  methods  and  anthropometry  measurements  so that the types of data used are primary and secondary data. The instruments used are microtoise, weight scales. Result: The sample count consisted of 16 hotel employees with different positions and levels of physical activity. Based on the results of the calculation shows there are 5 people (31.25%) who have a skinny BMI and 11 people (68.75%) have a normal BMI. Conclusion: the BMI avarage of  workers in normal status, with an avarage working time in 8 hours/day.

A good facility layout will affect the smooth production process. Preliminary observations on CV Renjana Offset are still not good enough to apply because they do not take into account the degree of closeness. This can be seen from the location of the machine and work stations that look far apart and the existence of intersecting material flows resulting in backtracking, such as the printing work station to the coating work station, the material transfer distance is 12.4 m and has to pass through the garden and back of the CV Renjana Offset office with distances that are too long cause the production time to be longer. The method used to design the layout of production facilities at CV Renjana Offset is the Systematic Layout Planning and Blocplan methods. This method was chosen because it is in accordance with the characteristics of the company and can minimize the distance between production stations and no longer intersecting production process flows. This research was conducted with the aim of knowing and getting an increase in the efficiency of the initial material handling layout with layout suggestions. The results of the calculation of the total area needed for assistance are 171.5 m². The results of SLP and Blocplan processing are 10 alternative layouts and the Adjacency score, R Score, and Rel-dist score feature values ​​are presented for each layout alternative. Of the 5 alternative layouts produced, there is a layout for the production of yearbook products which is chosen as the best layout because it has an Adjacency Score of 1.00, layout 2 has an R Score of 0.87, and the Rel-dist Score of the second layout has a value of 202. Based on three parameters, The selected layout is layout 2. Calculation of distances using the rectilinear method at each facility for the yearbook product layout is 28.29 m.

The role of ICT (Information and Communication Technology) is needed by employees as a provision for them to face the changes and demands of the times in the Industrial Revolution 4.0 era. Operating a computer is a part of hard skills, employees need to have skills in operating programs found in Windows and the program most frequently used is Microsoft Excel. However, to achieve this, companies must overcome several obstacles, such as a lack of quality competence to develop and manage, analyze various high-tech systems Workers who have the competence and skills will be accepted in the world of work in the industrial era 4.0. The output target of this dedication is in the form of training services in the form of information for students about data processing, calculation and data management using the Microsoft Excel application. The method of implementing the activities used is the offline training, discussion, and question and answer method. The results of implementing this community service activity are providing an understanding of the use of the Microsoft Excel application for preparing financial reports and improving the hard skills of Pt employees. Resmar Hartana

Human resources play an important role in helping an organization or company achieve its goals, and as a result, business growth is highly dependent on employee performance. Each employee receives a salary directly from the company, which is distributed at a time determined by the company, in accordance with the terms of the employee agreement with the company. UD Wahyu Printing is still doing it. At the UD Wahyu printing press, payroll calculation activities are still carried out manually using a calculator and manual recording which causes errors in calculating an employee's salary, so an electronic system must be created to overcome this problem. As for a goal to be achieved in this research is to perform a salary calculation of employees by implementing an automatic payroll system to make it more effective and efficient. This study uses a type of qualitative research with interviews and direct observation methods. The results of this study through the stages of implementation and trials carried out that the employee payroll information system at the UD Wahyu printing press can link payroll information with employee attendance procedures, and the data is stored in a database so that reports can be printed. And the system can provide facilities to employees regarding payroll calculations.

Tunneling construction is important to get more attention because considering the magnitude of the risks from this work such as the instability of the carrying capacity of the soil around the construction which can cause collapse during dredging or installation of tunneling walls, or and other problems such as lack of oxygen intake for workers who are carrying out tunneling excavations , the presence of toxic and flammable gases, or falling objects that can result in minor accidents or even death. The purpose of this study is to make a visual assessment through certain media (photos/videos) that can be done quickly regarding the existing conditions of the environment/work, whether the work carried out meets work safety standards, work safety regulations and so on. Rapid assessment can assume that what happened in the field at that time was a reflection of previous work. From the results of the study there were 58 variables which were divided into 4 main variables which were assessed based on the WBS and 26 photos of the environment of the Manikin Dam Tunneling development project taken from several sides. Calculations were made using the results of data from 6 informants, resulting in a P(H | Ecomb) value of 0.932 or a probability of 93.2%, which means that the tunnel work according to the 6 informants was carried out safely. The final value obtained from the analysis is almost close to 1 and all the results of the analysis from the 6 informants are more than 67%.

Elaboration of information regarding differences in bridge loading regulations, especially bridge loading on superstructures between RSNI T 02 2005 and SNI 1725 2016 regulations really needs to be done considering there are still many engineers who don't know and haven't upgraded. Changes to these regulations are based on scientific developments and environmental conditions that continue to change from time to time. The elaboration of the differences in these regulations is carried out to make the engineer aware that the changes that occur must be highly considered and evaluated in order to create a civil building that is strong, sturdy and safe for users.frame and shrinkage, traffic loads, D loads, additional fatigue loads, changes in the calculation of wind and earthquake loads.

PeduliLindungi is an application from the Government of Indonesia that was made in response to the COVID-19 pandemic. Since its initial release in 2020, this application has received many updates with the goal of improving its overall performance. One of the basics of updating applications is to process the reviews given by users at the Google Play Store using sentiment analysis. The methods used this time are Naive Bayes Classifier (NBC) and Support Vector Machine (SVM). The sample data used were 300 reviews with positive feedback and 300 reviews with negative feedback, for a total of 600 user reviews. The results of the NBC algorithm calculations produce an accuracy of 76%, a precision of 76%, a recall of 82%, and an f1-score of 79%. As for the SVM algorithm, it produces an accuracy rate of 80%, a precision of 83%, a recall of 80%, and an f1-score of 81%.

A calendar is a system for naming a period of time and is known as a Calendar Date. The Gregorian calendar is used throughout the world including Indonesia, this calendar is calculated from the birth of Jesus from Nazareth, the calculation uses the pattern of the sun's movement. The Gregorian calendar has 12 months in a year and 7 days in a week. The Hijri calendar is a calendar system based on the circulation of the moon around the earth, called Hijiriah because of its first year when the migration of the Prophet Muhammad from Mecca to Medina took place in 662 AD. Due to the different intervals or repetitions between the day and the weton where the day will return to the same day after 7 days while the weton will return to the same weton after 5 days, it is quite difficult to find out the day and weton on a certain date that is hundreds or thousands of days apart from the current date. The Gregorian calendar program with weton is used to find out the day and weton of a date by specifying the month and year, a 1 month calendar will be displayed along with the day and weton

As the center of academic activities of Muhadi Setiabudi University with 101 lecturers, 1266 students and 94 employees must be supported by adequate parking infrastructure. Parking is an important infrastructure in an activity. One of the problems in parking is the lack of adequate parking space. For this reason, it is necessary to evaluate the characteristics of parking in the campus area. The evaluation results found parking characteristics at the location in the form of: motorcycle parking volume of 347 vehicles and cars of 28 vehicles. The maximum parking duration for motorbikes is 195,089 minutes and cars is 185,591 minutes. The maximum accumulated value of motorcycle parking is 267 vehicles and cars are 18 vehicles. The maximum static capacity on the motorcycle is 922 vehicles while for cars it is 41 vehicles. The maximum parking index on motorcycles is 89% as well as on cars is 130%. The maximum turnover on motorcycles is 1.16 times and for cars 2.16 times. The maximum parking space requirement on motorcycles is 294 vehicles, on cars is 20 vehicles. From the calculation results, it can be concluded that the capacity of the existing parking lot for motorbikes is adequate, but for cars it is not adequate.

One of the main activities of hospital nutrition services is the provision of meals for patients in the hospital. The goal is to provide quality food in accordance with the nutritional needs, cost, safety and acceptance of the patient to achieve optimal nutritional status The food management information system currently used in the Nutrition Installation of Rsud Prof. DR H M Anwar Makkatutu Bantaeng is still using a manual (conventional) system, starting from calculating the need for foodstuffs to ordering foodstuffs. This is due to the unavailability of applications that can more efficiently save energy and time. So far, calculating food needs requires a long time and energy is needed by more than one person. The type of research method used in this research is a quantitative quasi-experimental research method which aims to show a causal relationship and to investigate the relationship and clarify the causes of events, where in this study it focuses on the use of energy and the duration of time used before and after using the application. computers for food management activities in the Nutrition Installation, in this case the calculation of food needs. Based on the results of the research, before and after using a computer-based management information system application to improve the efficiency of food administration at the Rsud nutrition installation, Prof. DR. HM Anwar Makkatutu Bantaeng (SPMIG), there was a difference in time duration, where the time used in calculating the need for foodstuffs was shorter or shorter. Food administration at the Nutrition Installation of Prof. DR H Makkatutu Bantaeng Hospital before using the SPMIG application software an average of 180 minutes - 210 minutes and after using the SPMIG application software the average was 1 - 10 minutes, so the time difference used was 170 minutes.

The purpose of this study is to determine labor productivity against costs and time of implementation of the Watudakon River DPT project development work. The results of this study are the large number of labor productivity in the construction work of the Watudakon River DPT project, Mojokerto. With the results of calculating the overall productivity level, namely with an average of 2,228 m³/day, assuming 25% of formwork material shunting work and 75% installation of formwork, the calculation data is in accordance with what is carried out in the field. Duration of implementation according to a survey conducted on DPT Sungai Watudakon construction work, Mojokerto with an average value of duration for installation of pile cap formwork 1.013 days/hour, and for installation of DPT wall formwork 1.00 days/hour, then for pile repair work DPT cap and wall 1.00 days/hour, and also for pile cap casting work 1.166 days/hour, for DPT wall casting work 1.312 days/hour. The conclusion in this study is that the productivity of the workforce working hours is in accordance with the realization in the field and that work results can be increased by adding working hours or overtime.

Machine maintenance must be carried out as a support for the reliability of a machine so that the production system can run smoothly to meet production needs. The fundamental problem of this study is in PT XYZ with the Roll Table 5Q machine, which frequently experiences sudden damage caused by critical components. The goal of the study was to determine the maintenance time interval of the 5Q Roll Table machine, the optimal age of the machine, and the number of mechanics based on the minimum total maintenance cost in an effort to improve the reliability of the machine using the Reliability Centered Maintenance (RCM) II methods and Life Cycle Cost (LCC) methods. From the results of research for critical components As Roll Table obtained interval value of 331 hours / 13 days once a year with the selection of action is Scheduled restoration task and for Bearing components obtained interval value of 109 hours/5 days once a year with the selection of action is Scheduled on-condition task. From the calculation of the total life cycle cost of Rp. 3,720,459,386 with the optimal number of mechanics on the Roll Table machine as many as 3 mechanics with an efficiency level of 9.63% with an optimal age for the Roll Table machine 5Q is 12 years.