Publication Search

This study aims to examine "Analysis of the influence of dissatisfaction, product attributes, and the need for variation, on the switching of the Asus brand ". This data research used a questionnaire with a scale of 1-5 with a sample of 96 respondents. This sampling technique uses a non probability sampling with technique  purposive sampling . The data obtained were then analyzed with the SPSS . The results of this study partially (1) Dissatisfaction has a positive and significant effect on brand switching based on the value of t count > t table that is 3.575 > 1.662 with a significant 0.001 < 0.05. (2) Product attributes have a positive and significant effect on brand switching based on the value of t count > t table, namely 2.362 > 1.662 with a significant 0.002 < 0.05. (3). The need to look for variations has a positive and significant effect on brand switching based on the t count > t table, namely 6.472 > 1.662 with a significant 0.000 <0.05. (4) Simultaneously, dissatisfaction, product attributes, and the need for variation have a positive and significant effect on brand switching. Based on the calculated F value < F table that is 111.918> 3.945 with a significant 0.000 <0.005. Based on Adjusted R Square that is equal to 0.778. In this case, it means that 77.8% of the variation in the brand switching variable is explained by the variables of dissatisfaction, product attributes, and the need to seek variation. Meanwhile, the remaining 22.2% is explained by other variables outside the model

  Packaging is one part of the product as a whole. Packaging must be able to attract the attention of consumers. Getting the attention of consumers is very important, because if a product does not get the attention of consumers (consumer attention), then consumers will not have a picture of the product (Hine, 1995). Packaging can give an initial picture of a product, both in terms of quality and value offered. “Jenang Kudus” is a type of traditional food originating from the city of Kudus. At first it was produced in a home industry since about a century ago. Initiated by mothers as a supporter of family income, and marketed directly to local consumers in traditional markets. Because the development of this business in the future is considered quite prospective for the Kudus community, the Kudus Regency Government makes the Jenang Kudus product as the mainstay product of the Kudus Regency. Based on some of the explanations above, there are several weaknesses in the packaging design of CV jenang products. Sinar Aisyah Kudus which can cause delays in the marketing process of its products due to unattractive packaging designs. This causes a desire to increase the competitiveness of jenang sales with other companies through attractive and varied packaging designs. Due to some of these things, raises the desire of CV. Hj Siti Aisyah to redesign the product packaging according to the type of jenang product, type of taste, quantity of contents, without leaving the characteristics of the previous design.

This study aims to develop a fuel inventory control system so that it can facilitate monitoring the volume of fuel stock from each bunker ship and can be reported at any time, so that the leadership can estimate the addition of fuel orders to PT. Pertamina for each bunker ship that is adjusted to the incoming fuel request order. If there is a sudden fuel order by the customer, the company can still serve the customer well, so that the fuel stock can be controlled and can be monitored properly at any time. The research method used in the information system monitoring the pump fabrication process is Research and Development (R&D) in this study only until the 6th (sixth) stage and produces the final product in the form of a prototype, so it does not reach the product implementation stage. The six steps are Research and information collecting, Planning, Develop preliminary form of product, Preliminary field testing, Main product revision and Main field testing. This application is made using Macromedia Dream Weaver and MySQL database.

During this pandemic period, many companies have experienced a decline in performance in any aspect, but many companies are also able to maintain their performance even during the current pandemic from the many activities within the company that we do not know how to maintain their performance. The purpose of this study was to find out how to implement a management control system for company productivity and payroll during the pandemic. This study uses a descriptive qualitative method with the data used is primary data. Conclusion From the results and discussion above For the control system at the company CV. TRIO CIPTA has a control system with a new strategy that is more suitable to be applied during this pandemic so that the company that produces this RO machine can survive during this pandemic. Productivity at this company also experienced a very rapid increase.

This Research is generally aimed at designing a system that can solve problems at Hotel Oyo Jakarta Selatan. In addition to the use of bathroom tools, there is a need for a gas controller in the bathroom space, especially ammonia gas and other gas in the bathroom. The bathroom control system at Hotel Oyo Jakarta Selatan is currently ineffective, in the use of the bathroom tools to hotel guests and hotel staff. The reseach method used by researcher is The research step begins with research and information gathering, then planning and developing the initial form of the product or system, and field testing the feasibility of the system or product, if there is a revision, it can be developed further before conducting the main field test. . Based on the research results, monitoring ammonia gas in rooms based on a microcontroller can be a solution for the Oyo South Jakarta hotel in monitoring rooms, both from guests or hotel employees more effectively and efficiently , and to facilitate the management of existing bathroom rooms in the Hotel Oyo Jakarta Selatan

Urban landscape design is an approach in designing cities that has a positive impact on city residents by providing a livable environment. Urban landscapes come in various forms, one of which is city parks. A city park is one of the facilities provided by a city and its residents can carry out several activities in it. A city park also serves as a city landmark. The city of Salatiga has several parks with recreational functions but not many city parks are available to function as public spaces. One of them is a park located in Tingkir District, Salatiga City, namely Tingkir Park. The purpose of this study was to apply 3D computer technology in the redesign of Tingkir park with the concept of Urban landscape design. A city park that is functional, aesthetically pleasing, can be a better public space and can become a landmark in the area. The method of developing a Virtual 3D City Park Design product uses 5 steps ADDIE (Analysis, Design, Development, Implement and Evaluation). In academic interest, this research results in the experimentation of computer graphics technology in the development of urban park design.

One of the main factors in achieving effective and efficient performance isattention to human resources. Having reliable and truly appropriate human resourceswith needs is the hope of every manager. The company needs employees with the appropriate abilities with job roles. As for the position of PT. Bogowonto Primalaras still uses a work period limit where employees cannot fill vacant positions at any time, based on the criteria of tenure an employee fulfills the term of service that is in accordance with his expectations. where on assessment in absenteeism is carried out by collecting daily report data that makes HRD send one by one who has sent the daily report. Where is the report related to the productivity criteria of an employee who has reached the target or not.

Motivation is the driving factor to achieve a quality services, especially in health. Work motivation is desirable in order to improve public health, it also can be expected to produce socially optimal production in accordance with the goals and ideals of the organization in the future. Research Purposes to determine the influence of work motivation on employee performance at Puskesmas Kairatu Method. This type of research used in this study was cross sectional. This research was conducted at the health center Kairatu West Seram regency. The population in this study were all employees of the health center Kairatu totaling 84 people. While the sample is done purposive sampling amounted to 69 people. The survey results revealed that respondents are less intensive relationship with the motivation to work as much (100%). For quite intensive relationship with the motivation does not support as many (10.8%) and motivational support as many (89.2%). known relationship with the working conditions are less motivation to work as much support categories (100%). For good working conditions to do with the motivation that does not support as many (11.4%) and support as many (88.6%). it is known that the relationship is less motivated colleagues support as many categories (100%). For a good relationship with co-workers motivation does not support as many (11.1%) sedangan motivational support as many (88.9%). Chi-square test results note that there is no significant relationship between the variables relationships with colleagues with the motivation which means p = 1.000 p> 0.05.

This empowerment was carried out bearing in mind that there are still many banana tree fronds that are not used and only become waste, therefore to overcome the large amount of banana frond waste in Marga Mulya Village. And to find out what the benefits of banana fronds are for processed products that are useful and have economic value, we make use of these banana fronds by making processed banana fronds chips that have high economic power by empowering housewives in Marga Mulya Village. This community empowerment is carried out every Saturday with four meetings. And it is hoped that the manufacture of banana chips which has been implemented in Marga Mulya Village can continue and help the economy of local residents.

Husna Roti is a business specializing in cakes and bakery products that has been operating for nine years in Desa Purwosari, Comal District, Pemalang Regency. As part of a community service program, faculty members and students are involved in providing assistance to help develop this business. The program includes various improvement efforts, particularly in the areas of marketing and human resource management. The actions taken include creating Grabfood and Instagram accounts to expand the digital market, making official stamps, obtaining halal certification, and producing promotional videos and documenting the production process. Additionally, the company profile and organizational structure were prepared to strengthen management. Financial reports and cost of goods sold calculations were also made to optimize cost management. Through this collaboration, the faculty members and students aim to provide concrete solutions to the challenges faced by Husna Roti. With this assistance, it is hoped that the quality of the products and the competitiveness in the market will improve, allowing the business to grow and positively impact the local economy.

Research on the Effect of Presidential Aid BLT UMKM on Productivity of Micro, Small and Medium Enterprises in Batang Regency aims to find out how UMKM working capital assistance affects the productivity of UMKM actors and to find out how the influence of this UMKM working capital assistance program has an effect on increasing the economic growth of UMKM actors in the Regency. Trunk. The research method used is quantitative, where data is obtained by distributing questionnaires to recipients of the MSME working capital Banpres while for sampling using a random sampling technique where a sample of 233 Banpres MSME recipients is obtained. Data analysis uses a regression formula. The results showed that 1) MSME working capital assistance had an effect on the productivity of MSME actors, 2) MSME working capital assistance had an effect on increasing the economic growth of MSME actors in Batang Regency

The increasing use of the Internet by a society marked by soaring costumer and businessmen, to encourage the emergence of an internet service demand in excess of what can be obtained in the real world. This includes the opportunity to sell goods online commodity. Business people in general are still conducting business transactions manually through direct face to face or over the phone. But sometimes this method is not very effective, because not everyone knows the phone number of the company. Should be developed based E-commerce system that focuses on individual-based business transactions using the Internet (technology-based digital networks) with application of E-commerce transactions can be done more quickly and more intensively. Therefore the grace of catering company wants to advertise his wares by using websites that have a sales system based on e-commerce with the aim of selling efficiency of the way the previous sales system. The method used in the design and development of e-commerce in the catering grace Semarang is a Research and Development (R & D) in this study only up to the stage six (6) to produce the end product is a prototype, so it was not until the stage of implementation of the product. The sixth step is Research and information collecting, Planning, Develop prelminaryformof product, Preliminary field testing, revision and Main Main product field testing. The results of the research prototype applications products that have been tested in the field and meet the objectives stated in the design and application development e-commerce in the catering grace Semarang

The craft MSME sector is one of the leading sectors for developed countries in foreign exchange earning country. Products in handicraft industrial centers always have a higher exchange rate profitable and can create added value that is greater than other sectors. Craft Center woven bamboo as an example of a leading industry in Indonesia that is able to absorb labor as well stimulating the micro economy, but cannot be separated from facing problems, including in the field of production and management. In the production sector, the problem faced is still weak application of standards technological procedures, the process of mastering technology where most producers still use equipment simple production leading to low productivity and efficiency. Apart from that, the weak business management which causes them to be unable to increase the scale of their business. From the background of the problems above, In general, this Community Technology Dissemination activity seeks to solve partner problems with introducing appropriate technology and providing business management assistance for quality and the quantity of products from the two prospective MSME partners increased. The methods given are: 1) Introduction technology for preparing material components with a spinser (a combination of spindle and serkel machines); 2) Mini introductions cold press; 3) Introduction of finishing technology; 4) Training on diversification of processed materials into products mixmedia (mixmedia furniture design / prototype.

Kelurahan is one of the government agencies which is the spearhead in administrative services to the wider community, the Kaliwungu subdistrict is an administrative part of the Kaliwungu sub-district, Semarang Regency which is located at Jl. Raya Ampel –Simo KM 8, in the service and processing of population administration data in the Kaliwungu village, they still use the conventional method, namely the data is still stored separately in books, this of course has weaknesses such as when looking for data records, difficulties in making reports population that cannot be obtained immediately and the process of data collection and storage of population archive data that is still stored and recorded manually. This research was conducted using the Research & Development Method through the system design stages which were validated by experts and product prototypes that were field tested by involving users. Making a prototype of an electronic filing system (e-filing) system application using the ALFRED method approach to analyze the system, the software used using Microsoft Visual Basic 6.0 as a design medium and as a programming language, and a SQL Server database as a storage medium. The final result of this research is a product prototype of a filing system using an electronic filing system (e-filing) which has been declared to be functioning properly so that it can produce useful information for the archiving process up to the stage of making reports, which can be done quickly and accurately in accordance with established procedures. already exist, making it easier to re-access archives and provide public services with accurate and integrated information 

Maos Lor Village, is one of the villages that has considerable agricultural potential and is one of the centers for banana production. However, the added value of banana cultivation in the village is not yet optimal. The selling price of bananas given is still quite low so that it has an impact on the level of economic development of the community which is still low when compared to the potential of the area owned. The objectives of this community service are to: 1) Increase knowledge in processing bananas into banana Dodol through training for community groups in the Maos Lor Village environment and 2) Improve community skills in increasing the added value of the Banana Dodol processed business. The activity was carried out in March-July (4 months) with several activities including socialization, training on making Calcium Dodol and post-production assistance. The results of this activity include the formation of a small business group of Banana Dodol "BAJA MAOS) which so far has been able to produce as much as 52 kg

Service quality in the Islamic concept can be said that the overall features and characteristics of a product or service that depend on its ability to satisfy stated or implied needs and in accordance with Islamic values.21 In this concept Islam teaches that providing services in the form of goods or services. must be of quality in accordance with Islamic values, and do not give bad and not quality because it will only harm both parties. Service quality in Islam is defined as a customer's assessment of the superiority or privilege of a product or service as a whole which is of course based on Islamic principles, the quality of service in Islam provides services that basically every activity related must be based on compliance with sharia which is full of values. -moral and ethical values. Improving the quality of service in Islam is very necessary in order to determine customer decision making. However, it will not run well if it is not accompanied by quality decision making. To maintain the quality of service in Islam is not only the duty of the employees, but all the members involved. Judging from the above phenomena, the quality of Islamic services can be taken into consideration for customer decision making. The purpose of this study was to determine how the influence of Islamic service quality on customer decisions in murabahah financing. The number of samples in this study was 100 respondents, this study used a quantitative approach. The data collection technique in this study used a questionnaire, and the sampling technique used the incidental sampling method using the hair formula. The data obtained were then processed with SEM AMOS Version 20. The results of this study indicate that the CR value is 3,418 > 1.96 and the probability is 0.000 < 0.05, so it can be concluded that Islamic Service Quality has a positive and significant effect on Customer Decision Making in Murabahah Financing.

Wonorejo Village, which is located in the Polokarto District, Sukoharjo Regency, is one of the central villages for convection products, almost 75% of the population is entrepreneurs in the convection business, the decline in turnover has been very significant since the Covid 19 pandemic in mid-2020, the most affected is in the product marketing process. company results. Initial efforts to restore the economy and increase the bargaining power of the Village have been carried out by initiating development into a Convection Tourism Village. The steps that have been taken are to carry out an inventory of convection throughout the village and develop a marketplace, the results obtained are that 80 convection businesses have been recorded and an e-commerce web has been created whose address is wisatakonveksi.com, as a follow-up to this effort is to conduct sales process training and socialize the existence of this marketplace.

The desired objective of this research activity is to examine and analyze the effect of compensation, motivation and job satisfaction on the work productivity of employees at PT. Nusantara Plantation IX Ngobo Ungaran Plantation. The population in this study were all production employees at PT. Nusantara Plantation IX Ngobo Ungaran Plantation, totaling 50 people. In this study, samples/respondents were taken from the entire population of 50 respondents, using saturated sampling techniques. Based on the discussion, the following conclusions can be drawn: Testing the compensation hypothesis on employee work productivity shows that the value of t count = 2.805 > t table = 1.684 with a significance number = 0.007 <α = 0.05 (significant). Thus, the hypothesis (H1) that compensation has a positive effect on employee work productivity is proven. Testing the hypothesis of motivation on employee productivity shows that the value of t count = 3.972 > t table = 1.684 with a significance number = 0.000 < α = 0.05 (significant). Thus, the hypothesis (H2) that motivation has a positive effect on employee work productivity is proven.

This study aims to determine the effect of work ability, incentives, and work discipline on work productivity at PT. Nayati Indonesia Semarang. The population in this study were all production employees at PT. Nayati Indonesia Semarang. The sample used was 82 respondents with simple random sampling technique. The data used is primary data, with data collection techniques using interviews and questionnaires, and data analysis used is multiple linear regression analysis. The results showed that the value of the coefficient of determination was 0.685, meaning that the variables of work ability, incentives, and work discipline could explain the variation in work productivity variables of 68.5%. The results of hypothesis testing with the statistical t test show that (1) Work ability has a positive and significant effect on work productivity, (2) Incentives have a positive and significant effect on work productivity, and (3) Work discipline has a positive and significant effect on work productivity.

This study aims to determine the effect of social media on learning outcomes in PAK (Catholic religious education) learning at Santa Maria Palangka Raya Middle School, especially for class VIII students. Through this research, the researcher wants to see further whether there is an influence of social media on the learning outcomes of Catholic Religious Education. This study uses a quantitative approach. The research location is at St. Catholic Junior High School. Maria Palangka Raya. The research population is all students in class VIII. The research sample is class VIII B and C taken by cluster random sampling technique. Data collection techniques used questionnaires distributed via google form and additional interviews with Catholic religious education teachers. The data analysis technique used Pearson's product moment correlation technique.