Publication Search

Almond crispy is one of the flat-shaped pastries and crunchy texture that is quite popular in Indonesia. As an effort to innovate the almond crispy almond crispy ingredients are diversified with mocaf flour and given a sprinkling of ketapang seeds. The purpose of this study is 1) to determine the public's acceptance of almond flour crispy Mocaf with Ketapang seed sprinkles; 2) to determine the composition of materials used in the manufacture of almond flour crispy ketapang seed sprinkles mocaf the most preferred community. The research methods used are library methods, experiments, documentation, questionnaires and sensory tests. The results showed that almond crispy mocaf flour with a sprinkling of ketapang seeds using 100% mocaf flour is the most preferred product. The composition of the ingredients used in the manufacture of almond crispy mocaf flour with Ketapang seed sprinkles consists of 100 g of mocaf flour, 80 g margarine, 80 g refined sugar, 30 g egg white, 20 g cornstarch, 20 g butter, 10 g Ketapang seeds, and 1 g salt.

Temanggung Regency has an area of mostly highlands because it is located on the part of Mount Sindoro and Mount Sumbing. In general, these areas have lower temperatures and water is more limited than areas that are located lower, especially during the dry season. Not all types of plants can live and develop properly. One type of plant that can be cultivated with good results is tobacco. Initially, the tobacco grown in Temanggung Regency was N. tabacum var. fructicosa then became a variety that has been adapted for years to produce a specific tobacco quality. Through a special cultivation model, namely related to tillage, planting seeds, plant maintenance and fertilization, a long flat-shaped tobacco is produced with a width of approximately 0.5-1 cm. Therefore, people call it soft tobacco. Soft tobacco which is the original cultivation of the people of Temanggung is a special attraction for kretek products so that several manufacturers mix their products with soft tobacco from Temanggung Regency. Regardless of the pros and cons of the tobacco plant itself, Soft Tobacco can have economic value so it has potential to be used as a Geographical Indication for Temanggung Regency. This writing uses a qualitative method, with a normative juridical approach, in which case the method uses a statutory and conceptual approach. Protection of geographic indications aims to protect the uniqueness of a product, in this case, Temanggung soft tobacco from counterfeiting or improper use, while at the same time providing opportunity and legal protection to the people of the Temanggung area as producers of soft tobacco products to get maximum benefits. Therefore it is interesting to write about Soft Tobacco having the potential to become a Geographical Indication for Temanggung Regency and what is the role of the local government in making this Soft Tobacco a Geographic Indication.

Myrtaceae  is one of the largest families, numbering 5500 species. General characteristics of this family include taproots, woody stems, thin skin, shrubs, tannins, single leaves, and flat leaf edges. The fruit is in the form of tubers, tops, capsules and drupes. The purpose of this study was to determine the types of plants belonging to the Myrtaceae and to determine the morphology and distribution of the Myrtaceae family. The research was conducted on June 12 2023 in Andir Village, RT.01 / RW.08, Rancamulya Village, Sumedang Utara District, Sumedang Regency. The method used is the method of exploration and observation by exploring the research location while observing the surrounding plants. The species results obtained included Syzygium aqueum totaling 4 individuals, Syzygium polyanthum totaling 6 individuals, Syzygium myrtifolium Walp totaling 176 individuals and Psidium guajava L totaling 7 individuals.

This study aims to test and analyze the effect of transfer prices and preferential relationship transactions on tax avoidance and to test and analyze the effect of profitability in moderating transfer prices and preferential relationship transactions on tax avoidance in infrastructure companies that are flattened on the indonesian stock exchange. The selection of samples in this study used the purposive sampling method with predetermined criteria, obtained by 23 companies for 6 years so that the total sample used was 138 data. The type of data used is secondary data obtained from the company's annual financial statements in the 2016-2021 period. This hypothesis is tested using descriptive statistical analysis, classical assumption test, multiple regression and moderation test, hypothesis test, namely t test and r analysis test. The results of this study show that partially the price of transfers and special relationship transactions has a negative and significant effect on tax avoidance. Profitability cannot strengthen but significantly affect transfer prices and preferential relationship transactions on tax avoidance

Diffuser is one of the construction that is able to control the behavior of the fluid. Adverse pressure gradient (APG) causes boundary layer develops rapidly so that it causes separation and Cp becomes low. So that need to evaluating divergence angle of diffuser to delay the separation to get optimization Cp of diffuser. This study uses a numerical method with software Fluent 6.3.26 with k-ω turbulence model of shear stress transport (SST) for evaluate in a symmetric flat-walled diffuser with constant ratio in divergence angle (2θ1) = 8° and usedused the Reynolds number 12.9 x 104. Test section consisted of three parts, namely symmetric diffuser, upstream channels, and downstream channels. The symmetric diffuser has a length (L1) = 500 mm, the upstream channel length (L2) = 500 mm, and the downstream channel has a length (L3) = 1000 mm. The results of the study showed that there is no flow separation on the field at midspan vertical diffuser (2θ1) = 8 °. However, based on the velocity vector visualization, flow separation can be observed at midspan plane horizontal to diffuser (2θ1) = 8 ° indicated the occurrence of separation in the area after the inlet diffuser, ie at x / L1 = 1.4 and x / L1 = 1.6

The research method used in this study is the research and development method or also called Research and Development. The research design that will be developed in this study uses the development model presented by Borgan Gall. The product produced in this study is an Arduino Nano-Based Distance Measuring Tool with a Display on the LCD on the Flat Side Room Building Material for Class VIII at SMP Negeri 5 Sepauk. The test subjects of this study included two subjects. The first subject is the validator and the second is class VIII students of SMP Negeri 5 Sepauk. The analysis technique used is to determine the effectiveness, practicality, and validity. The percentage of effectiveness from the average of the two analyzes obtained a percentage value of 94.06% with Very Effective criteria used in learning mathematics. The results of the combined teacher and student response questionnaires - the average percentage obtained was 89.55% with very practical criteria. The combined results of the average percentage obtained from the percentage of experts and the results of the measurement trials obtained a percentage of 76,36% with very valid criteria.    

The main thing that distinguishes between 2D and 3D animation lies in the quality of the resulting display, namely the appearance of 2D animation that seems flat and the appearance of 3D animation that seems more volume. This study aims to manually apply 2D visual effects as an alternative in making an animated visual effect. The process of uniting a 3D animation combined with 2D animation visual effects that are created manually frame by frame and using Clip Paint Studio and Blender software. The results of this study indicate that the application of 2D animation visual effects in 3D animation is able to display a visual style that resembles 2D animation and does not require computer engine performance that is too heavy, rather than using 3D simulation methods or 3D procedural which requires strong computer resources. It is good to use in making a 3D animation with a visual style of 2D animation.

The Map is a picture of the earth's surface that is displayed on a flat plane with a certain scale and the depiction of the earth's surface is reduced to a certain scale in the form of symbols that are selective in a certain projection system that is represented in two dimensions from a three-dimensional space. Various types of data can be described and explained in maps and provide information on the correlation of data to the geographical conditions (geospatial information) of an area which can then be used as a tool in policy formulation, in this case the customary area of ​​the Ayapo village in the East Sentani District. This research was conducted using a mapping method using spatial data based on satellite imagery from Google Earth Pro and community participation through field surveys through interviews. The data was then processed using ESRI ArcGIS software. The research was conducted in the Ayapo traditional village, Jayapura Regency, Papua Province. From the results of the information depiction carried out, it was obtained a map of the Ayapo village, a mapping of the distribution of indigenous peoples which included traditional leaders and tribal chiefs as well as a map of the structure of the customary space. Mapping also obtained the development of the ayapo village for 3 years, namely 2002, 2014, and 2021 which showed the growth of the village spread out along the coast of Lake Sentani in a linear form. This customary mapping becomes a source of information for the development of traditional traditional villages in Jayapura district.

Rapid technological advances make print communication media begin to be shifted by information media that utilizes computer technology as a means of delivery. Technological developments change the teacher's task from being a teacher to a facilitator who provides convenience in learning. SD Negeri 004 Bangsal Aceh is one of the schools that still applies the mathematics learning process using textbooks so that students do not understand the lesson. Teachers are required to make changes in teaching patterns in the classroom, one of which is with animated videos. This study uses the Multimedia Development Life Cycle (MDLC) method covering concept, design, collecting material, assembly, testing and distribution. The final result of this research is an animated video of mathematics learning about the material of flat shapes. Animated videos are used as an interesting and effective means of information and learning media. Besides that, it can also improve students' understanding and skills in learning mathematics, especially the material of flat shapes