Publication Search

Medokan Ayu Village is 3 km from the UPN "Veteran" East Java campus. The location of this service is located in Griya Amerta Housing RW 15, Medokan Ayu Village. Like housing in general, residential land area is usually relatively small, has relatively narrow yards and the distance between houses is also close to each other. So that the area of ​​the yard owned by the community for cultivating crops while developing agriculture is not very supportive. Verticulture or what can be called vertical farming is a system of cultivating plants vertically, so that the planting medium is put in a container that stands and rises up. This cultivation technique can be used in two ways, namely with water and soil as the planting medium. Pakcoy can be harvested when it is 40-50 days old, while curly lettuce can be harvested when it is 40-60 days old. This verticulture cultivation uses a mixture of several planting media such as soil, cocopeat, roasted husks, and kohe. The goal is for the plants to meet their nutritional needs and nutrients, so that the plants can grow optimally and have good quality.  

Poverty is a condition where people are unable to meet their basic needs. Poverty can be said to be a fairly complicated matter that is being experienced by various countries in the world, especially a developing country like Indonesia. Poverty can be used as a measuring tool for socio-economic conditions in assessing the success of development carried out by the government in an area. Various impacts that can arise from the increase or lack of handling of the poverty rate include a decrease in the level of social welfare, an increase in the crime rate, a decrease in the level of public health, a decrease in the quality of education and there are still many social problems that will arise as a result of this poverty. The poverty rate can be influenced by various factors including GRDP (Gross Regional Domestic Product), HDI (Human Development Index) and TPT (Open Unemployment Rate). This study examines the effect of GRDP, HDI and TPT on poverty in Central Java Province in 2002-2021. The purpose of this study is expected to be able to analyze how and how much influence GRDP, HDI and TPT have on poverty in Central Java Province, so that it is hoped that later this can be used as a basis for determining policies to overcome poverty in Central Java Province. The data used in this study is secondary data obtained through the Central Bureau of Statistics (BPS). The method of analysis in this study is the time series data analysis method of estimating the ECM model with the help of Eviews 10. The results show that the relationship between GRDP, HDI and TPT has a significant effect on the poverty rate in Central Java Province.

This journal discusses the utilization of articles as an effective means to enhance company's brand awareness while educating the public. In the ever-evolving digital era, companies need to employ communication strategies that effectively reach their target audience. This approach entails using informative and industry-relevant articles. The research involves analyzing the needs and preferences of the public regarding desired information. Based on the analysis, a series of articles are produced to fulfill the public's information needs and simultaneously promote the company's brand. These articles are published across various online platforms, including the company's website, blog, and social media. The results demonstrate a significant increase in brand awareness and public recognition of the company through the implementation of this strategy. Additionally, the articles provide educational benefits to the public by presenting valuable and industry-relevant topics. The utilization of articles as a means to enhance brand awareness while educating the public offers diverse advantages. It enables companies to expand their reach, improve consumer trust, and strengthen their market position. Simultaneously, the public gains access to valuable and beneficial information, enhancing their knowledge and deriving direct benefits from the provided articles. Therefore, this strategy effectively fosters positive relationships between companies and consumers while contributing to the overall literacy and knowledge enhancement of the public.

Application of the database system using the Dikbud HR application in personnel information services within the Indonesian Cultural Arts Institute (ISBI) Tanah Papua. Dikbud HR is a special application designed to meet the needs of personnel administration in the fields of education and culture. The results of implementing the Dikbud HR application are to increase the efficiency and effectiveness of personnel administration at ISBI Tanah Papua. In this study, data was collected through interviews with related parties and retention analysis related to the implementation of Education and Culture HR at ISBI Tanah Papua. The results of the study show that the application of the Education and Culture HR application brings significant benefits. First, the database system allows storing employee data in a structured manner, facilitating the management of personal information, work history, training and employee achievements. Second, attendance and leave management becomes more efficient with electronic attendance records and an automated process for applying for leave. Third, employee payroll can be done automatically based on the risk of salary data, benefits and deductions stored in the database, reducing calculation errors and speeding up the payroll process. Fourth, the management of employee training and development becomes more effective with well-documented training history data. Fifth, reports and analysis generated from the system database enable management to obtain accurate information and deeper insights into employee performance and the effectiveness of staffing programs.

One of the automatic sink products was made by Yogyakarta Technology University students. It is felt that this automatic sink product needs to be tested for its usability or ease of use. The USE questionnaire was used to carry out this test, and five test parameters were used. specifically, learning ability, efficiency, memory, error avoidance, and satisfaction. Based on its use, the purpose of this paper is to find out the user's opinion about the automatic sink product. The distribution of the USE questionnaire consisting of ten questions and five rating points on a Likert Scale was used to conduct this kind of quantitative descriptive research on consumers of automatic sink products. This study obtained usability measurement results for automatic sink products with a value of 84.67% on learnability, 96.22% on efficiency, 82.44% on memoriability, 88% on errors and 76.88% on satisfaction.

Deafness is a condition in which someone experiences hearing disorders, which usually causes the individual to have special needs. Deafness is one form of diversity owned by our community, and it is not uncommon that the differences in diversity become something not acceptable so easily. This research was initiated to dive deeper into the proof that even with special needs, a deaf person could also grow to their potential, and one of the ways is through art, especially the art of dance. The method used in this study is descriptive qualitative research methods through observation and interview. Other than pursuing artwork, dancing also becomes a medium for deaf students to develop personality and motor skills. The teacher’s role is crucial, and it is well regarded that further there will be more creative ways to enrich arts pursued by people, and especially children or students with special needs.

Laptops are very necessary for students in lectures. However, choosing a laptop for student needs is not easy. A way to help college students decide which laptop is right for their needs is to use a decision support system. The process used by DSS is the Analytical Hierarchy Process or AHP. shows that the Asus Vivobook Ultra 15 laptop is the first priority for students with a total score of 0.1243, the HP 250 G8 laptop is the second priority with a total score of 0.0951, and the Lenovo V14 G2 laptop is the last priority with a total score of 0.0823 for students. Based on the review and assessment of the previous chapter, the following conclusions can be drawn:1. Making DSS for laptop selection can be pursued with an analytical Hiarakiya process that ensures the criteria and weights are calculated systematically. 2. The process of analytic hierarchy, which is a decision support procedure for solving various multi-criteria decision problems, can also be used to solve the laptop selection problem.

Ribbon embroidery is an embroidery art that uses ribbons as the embroidery material, the development of ribbon embroidery to be applied to the clohting is still something that is rare because usually ribbon embroidery is only used in the manufacture of household linen or just as decoration. Likewise with webbing which is usually found on objects made of bamboo, because woven is rarely used in decoration on clothing. Destination making this report to find out the process of making decorated clothes using ribbon and woven embroidery. The methodology. The methodology used is Research and Development (R&D) method, data analysis using Analysis Descriptive. Making ribbon and woven embroidery that is applied to clothing through several stages, namely: 1) determining the fashion design, 2) the process of embroidering robbon, 3) weaving process, 4) validation, 5) sizing on the model, 6) pattern making, 7) cutting material, 8) making seams, 9) pressing, 10) sewing process, 11) finishing. The process of making clothing needs to be done carefully, to produce appropriate clothing. On sewing the skirt with refence to the pattern Singo Sato should be done carefully when sewing curved, because it can make the fabric stretchy if it’s too tight holding it in the sewing process. And it will make the stitching result not according to size.

This study aims to analyze how effective promotion can help build customer loyalty in kebab businesses in Wonokerto, and to find out whether the business is feasible or not to run. Qualitative case studies were conducted by conducting in-depth interviews with kebab business owners and several loyal customers, as well as observing promotional activities carried out. This study uses qualitative research methods to collect data and analyze complex phenomena in a specific language and cultural context. In-depth interviews were used to collect data from purposively selected informants, namely kebab business owners and some loyal customers. Observations were also made to obtain information regarding promotional activities carried out and interactions between customers and kebab business owners. The results of the study show that effective promotion can help build and maintain customer loyalty to kebab businesses in Wonokerto. Kebab business owners need to pay attention to customer needs and preferences in designing effective promotional strategies. Effective promotion must be able to attract customers and provide significant added value for them. Therefore, kebab business owners need to understand the characteristics of customers and the market environment to design targeted and effective promotional strategies. So that the business can be declared feasible to run.

Machine maintenance must be carried out as a support for the reliability of a machine so that the production system can run smoothly to meet production needs. The fundamental problem of this study is in PT XYZ with the Roll Table 5Q machine, which frequently experiences sudden damage caused by critical components. The goal of the study was to determine the maintenance time interval of the 5Q Roll Table machine, the optimal age of the machine, and the number of mechanics based on the minimum total maintenance cost in an effort to improve the reliability of the machine using the Reliability Centered Maintenance (RCM) II methods and Life Cycle Cost (LCC) methods. From the results of research for critical components As Roll Table obtained interval value of 331 hours / 13 days once a year with the selection of action is Scheduled restoration task and for Bearing components obtained interval value of 109 hours/5 days once a year with the selection of action is Scheduled on-condition task. From the calculation of the total life cycle cost of Rp. 3,720,459,386 with the optimal number of mechanics on the Roll Table machine as many as 3 mechanics with an efficiency level of 9.63% with an optimal age for the Roll Table machine 5Q is 12 years.

CV XYZ is a company engaged in manufacturing with production in the form of stacking chairs. This company has a production capacity of 200 units of stacking chairs every day. The company has 3 types of bunk chairs, namely CH-100 KR, CH-200 KR, and CH-200 PC. Customer demand at this company tends to be fluctuating (up and down) which results in the company experiencing difficulties in determining the optimal raw material inventory to meet customer needs. The Material Requirement Planning (MRP) method is an appropriate method for scheduling inventory. The result of this scheduling model is in the form of a master production schedule (JIP) which is used to determine the demand for chair products for the next 6 months. The results of data processing obtained requests for stacking chairs in the next 6 months for the type CH-100 KR 10.724 unit, CH-200 KR of 10.998 unit, and CH-200 PC of 9.687 unit. The demand is then calculated using the MRP approach with LFL and EOQ. An effective material requirements planning method with the lowest cost is to use the Lot For Lot (LFL) method which gives the lowest cost results IDR 7,475,617,611.

This study aims to analyze the responsibilities of directors in a company through a legal approach. In this context, the responsibility of directors refers to the legal obligations attached to directors in carrying out their duties and functions in a company. This study uses the literature analysis method to collect data from various legal sources, such as laws, court decisions, and related literature. The results of the research show that the responsibility of directors in a company has a strong legal basis. The directors have an obligation to act in good faith, carry out the functions of managing the company, and protect the interests of the company and its shareholders. They must make rational decisions, based on careful consideration and adequate information. However, there are several issues that need to be considered regarding the responsibilities of directors in the company. One of them is the potential problem of law violations by the directors, whether intentional or unintentional. In this regard, there needs to be an effective oversight and accountability mechanism in place to ensure that directors are held accountable for their actions.

Puskesmas as one of the most important health services infrastructure has a task for give health services to the whole of society. Puskesmas is accused to always keep patient’s trust and satisfaction by give quality services. Quality services in the context of the services at Puskesmas mean give services to the patient based on standard quality for fill up necessary and anxiety of the society, so that they can get satisfaction which finally can increase patient’s trust to Puskesmas. This study aims to determine the quality of health services, the causal factors, and the demands and needs of the community. Measurements from service quality using the SERQUAL method and data extraction is done either quantitatively or qualitatively.

Traffic problems are problems faced by developed countries as well as developing countries like Indonesia. However, in Indonesia, the problems that are often encountered nowadays are becoming more severe and bigger than in previous years, including accidents, congestion and air pollution as well as traffic violations. There are at least three factors that influence traffic law enforcement, namely: Judicial Factors, Law Enforcement Factors and Community Legal Culture Factors. In order for the law to have an influence on attitudes or behavior, certain conditions are required, namely: the law must be communicated; position to behave, meaning the things that motivate people to behave in a certain way. Fines alone are not effective in building a culture of safe driving. The government needs to make legal breakthroughs, both in the legal drafting aspect and the system that regulates implementation in the field.

Papungan’s one of the villages in Blitar Regency where most of the population are farmers and mostly cultivate rice crops. The effort was made by farmers to meet the needs of the community, but still in limited quantities. From the results of interviews with farmers in Papungan village, they complained a lot because the rice crop was still relatively low, due to the scarcity and high price of fertilizers. By making PGPR (Plant Growth Promoting Rhizobacteri) organic nutrients, it is a consortium of bacteria that actively colonize plant roots which play an important role in increasing plant growth, crop yields and land fertility. This study aims to optimize the profitability of rice farming in Pappungan Village. The results of the profit optimization calculation using the Goal Programming method. This study uses primary and secondary dta, and the purpose of this study aims to solve the problem of limited resources optimally with the Goal Programming method. Based on the results of the discussion of calculations using the goal programming method, the conclusion of the optimization of rice crops and applied using LINGO software, obtained optimal results, namely Z = 424.7647 with three goals achieved, among others, the production yield reached 27,640 Kg and the selling price of rice crop production reached Rp 18,000 / Kg with production costs required for rice crop production for per hectare of Rp 61,980,000. For the results of the goal achieved (goal) optimization of crop patterns, Papungan Village farmers are recommended to plant type B rice.

PT. Z is one of the companies that produces steel plates located in Surabaya, East Java. Production process at PT. The Z fully uses machines that operate 24 hours a day. The bottleneck in the steel plate production process is that there are often breakdowns caused by people, machines, and materials. In the engine factor, there is often a machine breakdown that makes production stop. The smooth running of the production process is disrupted due to damage to the production machine. High downtime often occurs due to repairs and replacement of components in certain machine parts. Therefore the machine needs maintenance / maintenance (maintenance). Among all production machines, rolling mill machines are the machines with the highest downtime rates. The components in the rolling mill machine that cause the highest downtime of 12,851 minutes are roll components. This study intends to make a scheduling plan for roll replacement on rolling mill machines. The methodology used in this study is Preventive Maintenance by calculating its reliability and making a schedule for replacing and maintaining the machine. The results showed that the average roll replacement every 6 days with 63.21% reliability, and the average roll replacement process time was 131 minutes.

This study aims to clearly describe the regulation of regulations that examine changes in the Employment Copyright Act, the legal consequences that can be caused to companies if they do not provide severance pay at the time of Termination of Employment and Government Regulation no. 35 of 2021. This type of research uses a normative juridical research model. Based on the Employment Act, a person who has retired, his rights and severance pay must be paid in accordance with the mandate of Article 156 paragraph (1). The results of this study are 1). based on several legal provisions as mentioned above, we can conclude that the retirement age in 2022 is at the age of 58 (fifty eight) years, 2). the current regulation regarding layoffs does not have to go through the determination of the Industrial Relations Court (PHI), the Company only needs to inform the workers of the intent and reason for the layoffs. If the worker refuses to be laid off, the worker can propose bipartite negotiations to the company and if a meeting point does not occur, mediation can be carried out, up to a settlement at the PHI, 3). different arrangements between the Manpower Act and the Job Creation Act. Among them is the amount of entitlement to severance pay. In the Manpower Act, a person who retires gets a severance pay amount of 2x (twice) the provisions of Article 156. While in the Employment Act it is 1.75 (one point seventy-five) from Articles 156, 4). criminal law provisions in the Copyright Act, if the employer does not provide severance pay in accordance with applicable legal provisions to workers who have been laid off due to entering retirement age. This is not regulated in the manpower law which is more civil in nature in terms of resolving disputes over layoffs.

As the main community within the scope of Islamic boarding schools. the role of the santri, who daily seek religious knowledge, is still needed for the sustainability of the institutional economy to meet future needs. By forming an entrepreneurship program that facilitates students, they will learn directly in the world of business by selling food products. it is also wrong to support the needs of the institution in the future. the purpose of conducting this research is to find out what efforts are made on the role of santri in the economic cycle of Islamic boarding schools. This study uses qualitative research methods with an ethnographic approach. and the theoretical basis used as an analytical knife is the structural-functional theory put forward by Talcot Parson. data collection using interviews, observation and documentation

Leadership is the art or ability of a person in coordinating and directing each individual or group towards achieving the expected goals. Leadership in an organization is seen as one of the most important aspects. An organization certainly needs a leader in order to run efficiently in accordance with its goals.  A leader must not only lead its members but also  become a representative of the organization, because a leader has a big influence on how an organization runs. Regardless of the roles and responsibilities of the leader, leadership traits and spirit can greatly help the running of an organization. Leadership training in general does not only aim to produce excellent leaders. It also provides education on organizational dynamics and how to run an organization efficiently. Leadership training that is held at the high school and college level are usually organized by the students themselves, the core of this training is activities organized by students and aimed at students. Leadership training can also be seen as a means to build a positive culture in educational organizations. It triggers active collaboration between staff and students, creating positive interactions within the educational organization. The leadership training takes the form of classroom-based training, workshops and seminars, online training, and mentoring and coaching.

This article will discuss the importance of character education in the world of education. Character education is an important part of the life process of students at school, of course it needs comprehensive activities in the process. Character education includes everything about the values ​​of positive people's behavior, helping people to become better people, especially individual students who will shape the next generation of the nation. The role of character education has a major influence on a person's moral development through letter education which will be used as a printer to renew the morals of the Indonesian nation through education. Family, teachers, parents and the environment all influence the cultivation of character education by students.