Induction motors are components that convert electrical energy into mechanical energy and are very much in demand among industries, with low prices, sturdy construction and easy maintenance making these induction motors used for heavy industrial applications. However, the 3-phase induction motor at this time chooses a low torque and speed so that it affects the efficiency of the induction motor performance, which will decrease.  This study examines the effect of unsymmetrical 2-layer 6-phase induction motor design on the torque and speed of 3-phase induction motors using the finite element method. This research was conducted using Ansys software, which aims to see the magnetic flux density and the effect of 6-phase induction motor design on the torque and speed of a 3-phase induction motor using the finite element method. The induction motor that is the reference for this research has specifications of a 3-phase induction motor: 0.75 KW, 1 HP, 220/380 V, 3.5/2 A, 50 Hz, 1390 rpm. From the results of this study, the simulation results of the shape of the flux density ... which is designed with the parameters of a 3-phase induction motor with an unsymmetrical 6-phase 2-layer induction motor coil design.

This research aims to design and test a genset fuel conversion system from gasoline to HHO gas (brown gas) as a more environmentally friendly alternative. Conventional fossil-fueled generators face challenges in theform of limited resources and the impact of environmental pollution. In this study, HHO gas is produced through a water electrolysis process using an HHO generator that separates water molecules into hydrogen and oxygen using electric current. The test results show that increasing the voltage from 2.58 V to 5.12 V significantly increases the volume of gas produced. At a voltage of 2.58 V, the gas volume reached 110 ml, and increased to 750 ml at a voltage of 4.72 V. The generator set was successfully operated for 1 minute 15 seconds with HHO gas using a separate battery power source. These results demonstrate the potential of HHO gas as an efficient alternative fuel for generator sets. This study recommends further testing with voltage and current variations to find the optimal configuration, as well as the use of a larger power source to increase the efficiency of HHO gas electrolysis.

Indoor air quality plays a vital role in public health, especially since people spend about 90% of their time indoors. Poor indoor air quality, often caused by chemical, physical, and biological pollutants, can severely impact health, comfort, and productivity. To tackle this issue, a robust air quality monitoring and control system was designed, featuring an ESP32 microcontroller paired with sensors such as the GP2Y1010AU0F dust sensor, MQ-7 carbon monoxide sensor, and MQ-2 smoke sensor, along with a fan to enhance air circulation. This system is capable of detecting air quality issues and taking corrective action. The ESP32 module, integrated with the Internet of Things (IoT) technology, enables real-time transmission of sensor data to a web server for continuous monitoring and prompt response. Researchers have made significant progress in creating an effective, system-based solution to improve and maintain indoor air quality

This paper presents the design and implementation of an automatic Virgin Coconut Oil (VCO) making device using an Arduino Uno microcontroller. Virgin Coconut Oil has gained popularity due to its health benefits and versatile uses in various industries. The traditional process of making VCO involves manual effort and precise timing, which can be tedious and inconsistent. The proposed automated system aims to streamline the VCO production process by integrating sensors, actuators, and a microcontroller to achieve precise control and monitoring of the process variables. The Arduino Uno microcontroller serves as the central unit for data acquisition, processing, and control, facilitating automation through programmed logic. Key components of the automated VCO maker include temperature sensors for monitoring heating stages, a motor for stirring, and relays for controlling heating elements. The system utilizes feedback loops to maintain optimal conditions during each phase of VCO production, ensuring reproducibility and quality. The design also emphasizes user-friendly operation, with an interface that provides real-time feedback on process parameters and allows manual intervention if necessary. Safety features are incorporated to prevent overheating and ensure operational reliability. Overall, the developed automatic VCO maker offers a practical solution to enhance the efficiency and consistency of VCO production, catering to both small-scale producers and commercial enterprises in the food and cosmetic industries

 
Utilization of new renewable energy is a solution to meet the increasing electricity demand, one of which is solar power generation technology. Solar panels are a renewable power generator that is environmentally friendly. The relatively low and unstable output voltage of PV is affected by solar irradiation, which becomes a constraint. Therefore, by utilizing a boost converter, the solar panel system is able to work 25% more optimally compared to without using a boost converter. The performance of solar panels when using a boost converter is around 83.3% and without using it, the performance is only about 58.3%. The average output power when using the boost converter is 1,521 W, whereas without using the boost converter, the average output power is 1,172 W. This indicates that the output power is more stable when using the boost converter compared to not using it. This research focuses on a boost converter with PID control as a support, optimizer, and voltage stabilizer where the output power on the solar panel is expected to be more optimal and the output from the solar panel is more stable with more optimal results in various conditions. In this study, 12 solar panels of 125 WP with a capacity of 1.5 KW are used in series-parallel to obtain the required power. If the output from the solar panel is insufficient due to weather conditions, the voltage will be increased by the boost converter towards the inverter so that the voltage remains stable into the inverter with the boost converter. This boost converter uses PID control to keep the output voltage stable.
 

SION (Sistem Informasi Online) ITB STIKOM Bali is a platform used by students and lecturers to support administrative and academic processes on campus. This research examines how the user experience (UX) level of SION can enhance the quality of services provided by the system. The purpose of this study is to measure user satisfaction with the user experience quality. The study uses the User Experience Questionnaire (UEQ) method, which includes six rating scales: attractiveness, clarity, efficiency, accuracy, stimulation, and novelty. The UEQ method also offers analytic tools that can be downloaded from its official website. Respondents in this study consisted of 75 people from a population of 248. The results of the UEQ analysis show positive evaluations across all aspects, with the following detailed scores: attractiveness received a score of 1.37, perspicuity 1.34, efficiency 1.16, dependability 1.21, stimulation 1.16, and novelty 0.87.

Milk consumption and the need for beef cattle for food purposes or sacrificial purposes continue to increase from year to year. This increase is in line with the increasing level of the economy and awareness of the need for nutritious food. However, the increase in demand still faces many production constraints due to the difficulties faced by farmers, the decline in cattle production from year to year in Indonesia. This causes Indonesia to have to import beef for 35.95% of the total national beef consumption. With many factors that affect the decline in the production rate of dairy cows or beef cattle every year, one of them is air pollution and poor air quality in cages. Along with the development of technology, a monitoring and detection system for air cleanliness in cattle pens was created, using the MQ-7 sensor as the concentration of carbon monoxide, the MQ-135 sensor as the concentration of ammonia gas, the MQ-2 sensor as the smoke detection, and When the air pollution value of each sensor input is according to the air pollution standard index (ISPU), the outputs namely indicator lights, buzzers and blowers will be on, then there will be temporary air neutralization in the cage. This tool is made easier by internet of things technology, so that it can send notifications via telegram and can see the level of air pollution levels through the web.

The news about the proposal of the government of the Republic of Indonesia regarding the postponement of the 2024 elections is certainly an interesting discussion. In this research, sentiment analysis will be carried out on the issue of postponing the election. In this study, a dataset obtained using the crawling technique was obtained in the amount of 1280 tweet data about the postponement of the 2024 election. Data labeling in this study uses lexicon-based techniques with Indonesian dictionaries. By applying this technique, the details of the data in the positive class are 67.7%, namely 157 opinion data, and 32.3% negative, namely 75 opinion data. The sentiment classification system's training and test data yield a 9:1 ratio when the Naïve Bayes Classifier method is applied, and word weighting using TF-IDF yields an accuracy value of 91.67%, precision of 90.91%, recall of 100%, and f1-score of 95.24%.

Current technological advances have made the need for information technology very necessary. With the existence of web-based geographic information system technology, it can help PT. Telkom Indonesia Tbk Prabumulih City Branch to digitize every Indibiz customer and target area for Indibiz products. The aim of this research is to create a web-based Indibiz customer mapping information system and to improve technician performance in matters concerning Indibiz. The research method used is descriptive qualitative, the Waterfall method as a system development method and UML as a design tool. The application was built using a website with the php programming language, a mysql database, and printing data using pdf files.

This study aims to analyze the sentiment of iPhone product reviews from Amazon using the BERT (Bidirectional Encoder Representations from Transformers) model to classify reviews as either positive or negative. The dataset, sourced from Kaggle, includes text reviews and star ratings, where high ratings indicate positive sentiment and low ratings indicate negative sentiment. After text preprocessing steps, including data cleaning, tokenization, and sentiment labeling, the BERT model was fine-tuned for sentiment classification, with the data split into training, validation, and test sets. Evaluation results demonstrate that the BERT model achieves a high classification accuracy, with an accuracy rate of 93.9% and a balanced F1 score between precision and recall. Confusion matrix evaluation also indicates that the model consistently identifies both positive and negative sentiments. This study shows that Transformer-based models like BERT are highly effective in understanding customer opinions in e-commerce, with broad application potential for data-driven decision-making in marketing strategies and product development.