Indonesia is a country with the largest Muslim population in ASEAN, but in Islamic banking Indonesia is still lagging behind Malaysia. This study compares the financial performance of Islamic banking in both countries with the CAMEL method. There are five aspects to the CAMEL approach, namely Capital Adequacy (CAR), Asset Quality (NPF), Management Quality (NPM), Earnings (ROA, BOPO), and Liquidity (FDR). The analytical tool used is a different t-test to find out whether there is a difference or not between the financial performance of Indonesian and Malaysian sharia. From the results of data analysis with the Independent t-test three variables namely (NPF, NPM, BOPO) showed significant differences, while the variables (CAR, ROA, and FDR) there were no significant differences between Indonesian and Malaysian banks.

The World Health Organization (WHO) recommendation that mothers breastfeed for a minimum of 6 months has not been achieved, this is because the psychological condition of mothers after giving birth often experiences disturbances, which will affect breast milk production. This problem can occur due to the transition period to becoming a parent, the anxiety felt during post partum can be one of the factors influencing breast milk production. The aim of this service is to This service activity is carried out with the aim of providing information about psychological adaptation in breastfeeding mothers and how to carry out this psychological adaptation to achieve optimization of the role as a mother at the Jongaya Community Health Center. The number of participants in this service activity was 15 people which was held on July 28 2023 at the Jongaya Community Health Center using the lecture and question and answer method as well as the sharing method. The results of this activity show changes in behavior in the form of successful adaptation, especially in psychological changes during breastfeeding.
 

In line with the development of science and technology today, a job that is done requires fast-paced data and information. By getting data and information quickly, the company has the ability to develop faster. Inventory is a very important part for a company. Inventory of goods is one of the tasks of logistics management in a company, namely support in the procurement of goods for the company. In order for this support to be utilized, it is necessary to plan and carry out in an integrated manner, which is interrelated and supports between related elements.
CV Sinar Karya Ungaran is a private company which is engaged in the distributor of Electric tools. CV Sinar Karya is located on the road Dabo II / D30 RT6 Nitibuana, Ungaran Regency Semarang Tel. (024) 3584074 - 3584075. This company has a wide enough working area covering Central Java and DIY. Because the working area is quite extensive and the number of processes in and out of goods, the company must be more careful in calculating inventory. In the process of recording and counting inventory at this time the company is still using Microsoft Excel so there are still many obstacles.
In the process of recording and counting inventory at this time the company still uses Microsoft Excel. One of the difficulties experienced is the frequent occurrence of errors in making inventory reports. Besides making reports takes longer because there is no computerized database system.
With the development of technology, especially in the field of computers, the authors try to create a computer-based inventory program using Visual Basic 6.0. This is expected to help companies in making goods inventory more quickly and accurately.

In the first quarter of 2017, retail in Indonesia recorded a growth of 2.5%, while in 2018 the growth was only in the range of 1% -1.5%. The cause of the slow growth is the change in the consumption pattern of the people and it will continue at the beginning of 2018. In addition, the decreasing productivity of the community at the lower middle level. As a retailer, Anterah store also faces the same thing, so anticipating a decline in sales requires an analysis of the best-selling products and how to find out the relationship between the products purchased by consumers. The association relationship between these products will be used as the basis for product arrangement, so that the frequency of products that consumers often buy can be arranged closely together so that consumers do not have to look for them longer. Market basket analysis to determine the relationship between products sold simultaneously is used to explore association rules (Association Rule Mining) which will produce products that are purchased simultaneously as a consideration for product arrangement in Anterah Retail storefront. Meanwhile, the best-selling products will be explored using the Frequent Pattern Growth method in order to obtain a ranking list of the most purchased products by consumers. This analysis is used as a basis for considering product promotion. The test results on the sales sample data obtained an average value of minimum support = 0.0025, minimum confidence = 0.610, LaPlace = 0.9985, Gain = -0.006, p-s = 0.003, Lift = 103.82, Convicting 2.5285 with a processing time of 41.456 seconds.

This study generally aims to design an information system that can handle problems in putting and sorting goods into warehouses at CV. Sekar Intan KIC Gatsu, Semarang. In terms of using the Information System, CV. Sekar Intan KIC Gatsu, Semarang. In the transfer and sort of goods in the warehouse still using a manual system when the implementation, warehouse employees must take and place the goods to the warehouse that has been determined each - each type of item, so employees must calculate the number of items when the goods take place, here various problems occur, because it requires some HR to manage the warehouse performance process at CV. Sekar Intan.
To support the research, researchers used Research and Development (R & D) research methods through the microcontroller-based moving robot design simulation design stages that have been tested by experts declared valid with Valid validity levels and final product development design simulation prototypes carried out. goods transfer robot uses Arduino IDE development software that is integrated with Arduino Mega 2560, 6 pin line sensor, dc motor, motor driver, servo motor, motor driver, lcd, and has been tested in the field by General Adv. Administration and HRD as users / users and stated to be very effective.
Based on the results of the research and discussion, it can be concluded that the robot design system developed can overcome the problems in the old system on the CV. Sekar Intan KIC Gatsu Semarang, so as to produce a system that can facilitate work processes and parking processes for employees to be more effective and efficient.

Customer loyalty merupakan salah satu hal penting dibidang bisnis. Hal tersebut dikarenakan customer loyalty dapat memberikan tambahan pendapatan bagi sektor bisnis. Customer loyalty diterapkan tidak hanya pada bisnis retail saja, tetapi banyak sektor bisnis lainnya yang menerapkannya. Customer loyalty memiliki beberapa variabel dan faktor yang dapat mempengaruhinya. Hal tersebut antara lain adalah engagament, satisfaction dan brand. Ketiga faktor tersebut dapat dihasilkan dari penerapan gamifikasi. Oleh karena itu, dalam penelitian ini akan dijelaskan mengenai gamifikasi yang dapat mempengaruhi customer loyalty. Pada penelitian ini juga akan dibahas elemen game apa yang sesuai dengan konteks ini, bagaimana cara penerapannya dan apa dampak yang akan dihasilkannya. Hasil dari penelitian ini menyimpulkan bahwa terdapat beberapa elemen gamifikasi yang dapat diterapkan. Ditunjukkan pula implementasi gamifikasi yang cocok untuk permasalahan ini.

Taking selfies for documentation reasons mentioned by Rettberg (2014) and Chae (2017). Likewise, this study reports documentation and archiving, which is part of communicating self-motives. Additionally, this research draws attention to general digital effects such as special event filters and seasonal filters used with selfies to signal specific locations or events. In their research, Senft and Baym (2015) noted that selfies can be used as an empowering tool to overcome political problems. This research shows how selfies are used as an empowering tool to educate Saudi women, particularly about their legal rights. The use of selfies as an educational tool in the context of public problems has not been reported in previous research.

Augmented Reality (AR) and Virtual Reality (VR) which are one of the top ten strategic technology trends for 2019 and continue to be developed massively in this 2020, have been widely applied in various mobile applications by many companies in this industrial revolution era 4.0. AR can be applied to help the promotion for housing developers where users can see the 3-dimensional shape of the types of houses offered, while VR allows users to explore each part of the house in a virtual 3D. Pre-existing brochures are used as markers for this application to work, so that AR and VR applications can be a complement to promotional media. The design method used in this paper is Research and Development (RnD). Salespeople can offer types of houses to prospective customers without having to print multiple brochures, but with just one brochure and one android smartphone to present, so the promotion costs are more efficient.
 
Keywords: AR, VR, house.

Inventory is an asset in the form of goods and equipment to support the company's operations. PT Indonesia Comnet Plus is a company engaged in telecommunications, inventory control in the company includes devices or tools used in network construction and network maintenance. In the process of determining the priority of inventory tools and monitoring the use of tools still use manual and subjective methods. Thus causing the possibility of not being precise in determining the priority of inventory tools that must be immediately in stock. The Fuzzy AHP (Analytic Hierarchy Process) method is a method that is considered better in the process of inventory management tools to the maximum. The test results prove that the fuzzy AHP method has an important level of criteria so that the resulting weight value is more detailed. The output of this system is in the form of a monitoring tools system that is equipped with a decision support system in determining the priority of the best tools inventory.
 

Wood is an important element determining the quality of a product on furniture. The lack of knowledge of the furniture industry in this industry causes problems to choose a decision in determining the wood material to produce quality and quality furniture products. Development of a decision support system using the Analytichal Hierarchy Process method uses wood quality feasibility parameters consisting of five criteria, namely Physical Physical Properties, Mechanical Mechanical Properties of Wood, Wood Grade, Wood Age and Wood Substance from several samples. The results of this study were to produce a decision from the data to determine a decision, a decision support system for the purchase of wood materials for a furniture industry company using the Analytichal Hierarchy Process method. After testing, it can be concluded that the decision obtained is appropriate for use by staff and superiors and is ready to be implemented.