Klaim Artikel Anda
Verifikasi kepemilikan artikel akademik
Apakah artikel-artikel ini milik Anda?
Daftarkan diri Anda sebagai author untuk mengklaim artikel dan dapatkan profil akademik terverifikasi dengan fitur lengkap.
Badge Verifikasi
Profil terverifikasi resmi
Statistik Lengkap
H-index, sitasi, dan metrik
Visibilitas Tinggi
Tampil di direktori author
Kelola Publikasi
Dashboard artikel terpadu
Langkah-langkah Klaim Artikel:
- 1. Daftar akun author dengan email akademik Anda
- 2. Verifikasi email dan lengkapi profil
- 3. Login dan buka menu "Klaim Artikel"
- 4. Cari dan klaim artikel Anda
- 5. Tunggu verifikasi dari admin (1-3 hari kerja)
Menampilkan 1–2 dari 2 artikel
Identifikasi Bahaya dan Analisis Risiko Pada Pekerjaan Ketinggian Menggunakan Metode Job Safety Analysis (JSA) Pada Gedung Fasilitas Kesehatan di Kota Semarang
Adani, Hafidh Atha
; Kalmah, Kalmah
; Hidayati, Ratna
; Sangadji, Ramli
Jurnal Universal Technic (UNITECH)
Vol 4
, No 2
(2025)
Working at heights refers to performing tasks in elevated locations, which pose a risk of injury to workers in the event of a fall. To reduce the number of accidents caused by working at heights, one of the necessary steps is conducting hazard and risk assessments using the Job Safety Analysis (JSA) method. JSA is an analytical method used to identify hazards at the workplace and find ways to reduce the risks of accidents. The purpose of this study is to assess the completeness of safety equipme...
Sumber Asli
Google Scholar
DOI
Analisa Pengaruh Variasi Bevel Dan Penggunaan Backing Ceramic Terhadap Kekuatan dan Defect Material Baja Grade A Pengelasan Shield Metal Arc Welding (SMAW)
Muflih, Abdullah
; Sangadji, Ramli
; Hamid, Abdul
; Sutrisno, Sutrisno
; Wa’addulloh, Mu’izzaddin
Jurnal Universal Technic (UNITECH)
Vol 4
, No 1
(2025)
Grade A steel plates are commonly used in marine and offshore structures due to their high corrosion resistance. This study investigates the effect of bevel angle variations (30°, 40°, and 50°) and the use of ceramic backing on the mechanical properties and welding defects of Grade A steel using the Shielded Metal Arc Welding (SMAW) method. Welding was conducted with four-pass multipass welding. An experimental approach was employed, including macro visual inspection, dye penetrant, tensile, and...
Sumber Asli
Google Scholar
DOI