Durability is defined as a measure of a rock's resistance to weathering and disintegration when the rock undergoes weathering processes over a short period of time. The susceptibility of rocks to disintegration is related to their low durability. Rock durability is often measured using the slake durability test. The slake durability test is widely used to assess physical changes resulting from wetting-drying processes (Franklin and Chandra, 1972). Therefore, slake durability testing is conducted to understand the weathering of rocks caused by heat and water, particularly clay stones which are one of the constituent rocks on a slope. The sampling location is around Sanga-sanga and Muara Badak. Sampling was conducted with coordinate points and the Balikpapan and Kampungbaru formations. The claystone samples taken were then brought to the Mineral and Coal Technology Laboratory of the Engineering Faculty of Mulawarman University for Slake Durability tests. In this study, the lowest index value obtained was 45.7% and the highest value was 93%, indicating high to very high durability. The difference in the durability index values of claystone at the research locations indicates the presence of variables that can affect the slake durability index values of the claystone in the Balikpapan and Kampungbaru formations, including grain size and mineral content as well as geological conditions at the research site. Based on the results of the claystone durability tests, the durability index value (Id2) was obtained, indicating that the sandstone at the research location falls into the classification of high to low.

This journal examines the factors that have the potential to cause delays in the implementation of the Dempsey Hill residential housing construction project, North Citraland, Surabaya. Projects managed by CV. Tirta Kusuma has a target of completion in 10 months, but there are indications of delays that affect the schedule and costs. This study aims to identify and analyze the dominant factors causing delays, such as project management, material procurement, and human resources. The methods used include observation, questionnaire distribution, and literature study. The results of this analysis are expected to provide recommendations to improve time management, resource efficiency, and control of future construction projects. The results of data analysis in this study indicate that project delays are primarily caused by material delays and errors in work execution, as concluded based on the results of factor analysis.

In the Kutai Basin area, seasonal changes such as high rainfall can significantly increase groundwater content, so that the effect of water content on the shear strength of claystone, increasing water content in rocks tends to decrease shear strength. Water in the pores or fractures can increase pore water pressure and reduce effective normal stress. Shear strength is one of the most important mechanical parameters used to assess soil and rock stability, this parameter is very important in slope stability analysis, foundation planning, and various civil engineering and mining applications. Therefore, this study was conducted to determine whether the water content in rocks can affect the strength of rocks in receiving shear forces. The method used in this study is more quantitative and specific to the effect of water content on the shear strength of claystone in this area. Increasing water content in rocks tends to reduce shear strength. This study was conducted by taking claystone samples from several locations in the Kutai Basin. Data collection in the form of primary data and secondary data for testing physical properties and testing mechanical properties, in testing physical properties, the water content value will be taken as supporting data which is one of the factors that affect rock strength, in testing mechanical properties, claystone shear strength data will be taken. From the results of the physical properties test calculations, the air content in each Formation is obtained, namely, in the Kampungbaru Formation the minimum air content value is 15.54% and the maximum is 20.17%, in the Balikpapan Formation the minimum air content value is 10.21% and the maximum is 12,88%, in the Palaubalang Formation the minimum air content value is 10.49% and the maximum is 22.87%. The results of the strength of the claystone in receiving shear forces in the Kutai Basin are the Muara Jawa location 0.486MPa, Tanah Datar location 0.500 MPa, Sanga-sanga location 0.333 MPa, Muara Badak location 0.269, Air Putih location 0.711MPa, Mugirejo location 0.021 MPa and Lempake location 0.092 MPa.

This study aims to design and develop a GPS tracking system for ships integrated with Internet of Things (IoT) technology. The system enables real-time ship position monitoring via the Telegram application by utilizing ESP32, SIM800L, and GPS Neo 6M modules. The research employs an experimental method with both static and dynamic testing of hardware components such as GPS modules, SD cards, and battery performance. The test results demonstrate that the system successfully transmits accurate coordinate data to Telegram and logs the location on the SD card module. This system is expected to serve as an alternative solution to improve ship tracking security and efficiency, particularly in emergency situations or AIS signal loss.

The aim of this study is to design a battery charging system using solar panels, integrated with an IoT-based monitoring system to improve efficiency and ease of supervision. The system utilizes the photovoltaic effect to convert solar energy into electrical energy, which is then stored in a battery through the regulation of a solar charge controller. The main components in this design include a solar panel, lead-acid battery, ESP32 microcontroller, current and voltage sensors, and the Blynk application for remote monitoring. The research method involves several stages, including the design of hardware such as solar panels, current and voltage sensors, and a step-down regulator, as well as software development using the Blynk platform and ESP32 programming. Test results show that the system is capable of achieving charging efficiencies between 89.45% and 99.57%, with optimal performance under clear weather and maximum sunlight conditions. The IoT system performs well up to a distance of 10–15 meters, with an average data transmission delay of less than 1.5 seconds. Therefore, this device proves to be effective as an independent battery charging and energy monitoring solution in locations without permanent electricity access.

Digital transformation through Internet of Things (IoT) in warehouse management represents a paradigmatic revolution in contemporary logistics systems. This research comprehensively explores the complexity of IoT implementation, analyzing critical factors influencing digital transformation in storage systems. Utilizing a systematic literature review methodology, the research unveils multidimensional dynamics involving complex interactions between advanced technology, organizational structures, and human resources. Findings indicate that successful IoT implementation requires a holistic approach that transcends mere technological adoption, demanding a fundamental reconstruction of business ecosystems. Key factors include top management support, sustainable infrastructure investment, human resource competency development, and innovation culture creation. The research affirms that digital transformation is not simply a technological project, but a complex strategic journey requiring long-term commitment and sustainable adaptive capabilities. Research implications provide profound insights for academics and practitioners in designing effective digital transformation strategies in warehouse management.

Community Service Activities are a real form of students' social concern for the surrounding environment. Five students of the Management Study Program at Borneo Tarakan University carried out community service in collaboration with local MSME actors through an activity entitled "Sharing Chocolate Bread as a Form of Social Concern". This activity was held on Sunday, May 4, 2025 at 11.00–12.00 WITA at the Hidayah Nurul Yaqin Orphanage, Jl. Sesanip, Karang Anyar, Tarakan, North Kalimantan. The activities included welcoming, praying together, introductions, distributing chocolate bread produced by MSMEs, and documentation. The children of the orphanage welcomed enthusiastically, a warm and pleasant atmosphere was created, and positive interactions were established between students, MSMEs, and the children of the orphanage. This activity brought happiness to the children, became a means of social learning for students, and promoted products for MSMEs. This collaboration shows that synergy between academics and business actors can provide sustainable social contributions.

With the times, cash transactions that used to use cash are now turning to credit cards. However, the increasing use of credit cards presents challenges, especially in maintaining customer loyalty. Customer churn is the loss of customers within a certain period for various reasons. Logistic Regression is a machine learning algorithm that studies the relationship between a dependent variable and several independent variables and Extreme Gradient Boosting (XGBoost) is a Gradient tree-boosting algorithm that offers out-of-core learning and sparsity awareness.The purpose of this study is to compare the performance between Logistic Regression and Extreme Gradient Boosting (XGBoost) algorithms in predicting customer churn in credit card services using evaluation metrics such as accuracy, precision, recall, and F1-score. Based on the research results, it can be concluded that XGBoost has better performance in all evaluation metrics, both in terms of precision, recall, F1-score, and accuracy. Based on the research, XGBoost shows superior performance compared to Logistic Regression in all evaluation metrics.

This study aims to evaluate the performance of the loading and unloading equipment in coal mining activities at the Mahakam Pit, PT Insani Bara Perkasa Site Km 11, East Kalimantan. The research was motivated by the importance of achieving mechanical equipment performance standards according to the Decree of the Minister of Energy and Mineral Resources No. 1827 of 2018. Data were obtained through direct observation and analysis of actual working time and evaluation of operational constraint factors. The results of the analysis showed that before the evaluation, the mechanical availability (MA) value was 87.24%, physical availability (PA) 88.51%, availability utilization (UA) 88.73%, and effective utilization (EU) 78.54%. After evaluating the constraint time, there was an increase in all parameters: MA to 88.71%, PA to 89%, UA increased to 90%, and EU reached 80%. This evaluation also had an impact on increasing the productivity of the loading and unloading equipment from 268.41 bcm/hour to 284.43 bcm/hour. Thus, the evaluation of work obstacles is proven to be effective in increasing the efficiency and productivity of the digging-loading equipment at the research location.

This study investigates impoliteness strategies used in the YouTube comment section of Gibran Rakabuming's video entitled "Generasi Muda, Bonus Demografi, dan Masa Depan Indonesia." Using a qualitative approach and Culpeper's (2005) impoliteness framework, the researchers analyzed 50 purposively selected comments. The study identifies various strategies such as bald-on-record impoliteness, sarcasm/mock politeness, positive impoliteness, and negative impoliteness. The findings reveal that bald-on-record and sarcasm are the most frequent strategies used, often driven by political dissatisfaction and emotional expression. This study aims to determine the most dominant impoliteness strategy employed by netizens and contributes to understanding digital discourse in Indonesian political contexts, highlighting the role of anonymity and group identity in shaping online communication.