Pengaruh Kompetensi Sumber Daya Manusia Dan Pemanfaatan Teknologi Informasi Terhadap Kualitas Laporan Barang Milik Daerah (Studi Kasus Pada Dinas Komunikasi, Informatika Dan Statistik Provinsi Sumatera Barat)
(Joni Zulfiandi, Febryandhie Ananda)
DOI : 10.59581/jrim-widyakarya.v1i3.815
- Volume: 1,
Issue: 3,
Sitasi : 0 05-Jul-2023
| Abstrak
| PDF File
| Resource
| Last.02-Aug-2025
Abstrak:
This study aims to determine the effect of human resource competency and information technology utilization on the quality of regional property reports (a case study at the Office of Communication, Informatics, and Statistics of West Sumatra Province). The method used in this study is quantitative, using primary data in the form of a questionnaire. In analyzing the data using SPSS 25 software, the sampling method used was purposive sampling of 52 ASN respondents from the Office of Communication, Informatics, and Statistics of West Sumatra Province. The analysis technique used is multiple linear regression. Based on the research results obtained, it shows that the competence of human resources and the use of information technology affect the quality of regional property reports at the Office of Communication, Informatics, and Statistics of West Sumatra Province..
|
0 |
2023 |
Korelasi Kompetensi Pedagogik dan Percaya Diri Guru Terhadap Keberhasilan Program SMK Pusat Keunggulan
(Joni Firdaus, Sarmini Sarmini, Julia Safitri)
DOI : 10.24246/j.jk.2023.v10.i1.p45-49
- Volume: 10,
Issue: 1,
Sitasi : 0 27-Jun-2023
| Abstrak
| PDF File
| Resource
| Last.07-Jul-2025
Abstrak:
SMK Multistudi High School Batam is one of 895 SMKs in Indonesia selected by the government in 2021 to implement the SMK Center of Excellence program. This program hopes to help teachers solve every learning problem to prepare graduates ready to compete in the world of work. This quantitative study uses a sample of 45 teachers at SMK Multistudi High School Batam. This study aims to analyze the correlation between pedagogic competence and teacher confidence in the success of the SMK Center of Excellence program. The result of the study shows that there is a positive and significant correlation between pedagogical competence and the success of the Center for Excellence Vovatiobal High School program, with the result of the t-test showing t count 5.379 >ttable 1.679 ans sig.0.000< ? 0.05. It turns out that teacher self-confidence is not correlated with the success of the Center for Excellence Vocational High School program, where the t-score shows a t-score of 0.097 < t-table of 1.679 and sig.0.454 > ? 0.05. The study's results show a partially positive and significant correlation between pedagogical competence and teacher confidence in the success of the Center of Excellence in Vocational High School program, with the F test results showing a significance value of less than 0.05 (0.000<0.05).
|
0 |
2023 |
A DIGITAL PRINTING APPLICATION AS AN EXPRESSION IDENTIFICATION SYSTEM
(Arman Arman, Prasetya Prasetya, Feny Nurvita Arifany, Fertilia Budi Pradnyaparamita, Joni Laksito)
DOI : 10.51903/jmi.v1i1.135
- Volume: 1,
Issue: 2,
Sitasi : 0 12-Aug-2022
| Abstrak
| PDF File
| Resource
| Last.23-Jul-2025
Abstrak:
Human Computer Interaction (HCI), a growing research field in science and engineering, aims to provide a natural way for humans to use computers as tools. Humans prefer to interact with each other mainly through speech, but also through facial expressions and gestures, for certain parts of the speech and displays of emotions. The identity, age, gender, and emotional state of a person can be obtained from his face. The impression we receive from the expression reflected on the face affects our interpretation of the spoken word and even our attitude towards the speaker himself. Although emotion recognition is an easy task for humans, it still proves to be a difficult task for computers to recognize user`s emotional state. Advances in this area promise to arm our technological environment by means for more effective interactions with humans, and hopefully the impact of facial expressions on cognition will increase rapidly in the future. Will do. In recent years, the adoption of digital has increased rapidly, and the quality has improved significantly. Digital printing has resulted in fast delivery and needs-based costs. This article describes a sophisticated combination classifier approach, an empirical study of ensembles, stacking, and voting. These three approaches were tested on Nave Bayes (NB), Kernel Naive Bayes (kNB), Neural Network (NN), Auto MultiLayer Perceptron (Auto MLP), and Decision Tree (DT), respectively. The main contribution of this paper is the improvement of the classification accuracy of facial expression recognition tasks. In both persondependent and nonpersondependent experiments we showed that using a combination of these classifier combinations gave significantly better results than using individual classifiers. It has been observed from experiments that the overall voting technique by voting achieves the best classification accuracy.
|
0 |
2022 |
A DIGITAL PRINTING APPLICATION AS AN EXPRESSION IDENTIFICATION SYSTEM.
(Arman Arman, Prasetya Prasetya, Feny Nurvita Arifany, Fertilia Budi Pradnyaparamita, Joni Laksito)
DOI : 10.51903/jtie.v1i1.135
- Volume: 1,
Issue: 2,
Sitasi : 0 12-Jul-2022
| Abstrak
| PDF File
| Resource
| Last.23-Jul-2025
Abstrak:
Human Computer Interaction (HCI), a growing research field in science and engineering, aims to provide a natural way for humans to use computers as tools. Humans prefer to interact with each other mainly through speech, but also through facial expressions and gestures, for certain parts of the speech and displays of emotions. The identity, age, gender, and emotional state of a person can be obtained from his face. The impression we receive from the expression reflected on the face affects our interpretation of the spoken word and even our attitude towards the speaker himself. Although emotion recognition is an easy task for humans, it still proves to be a difficult task for computers to recognize user`s emotional state. Advances in this area promise to arm our technological environment by means for more effective interactions with humans, and hopefully the impact of facial expressions on cognition will increase rapidly in the future. Will do. In recent years, the adoption of digital has increased rapidly, and the quality has improved significantly. Digital printing has resulted in fast delivery and needs-based costs. This article describes a sophisticated combination classifier approach, an empirical study of ensembles, stacking, and voting. These three approaches were tested on Nave Bayes (NB), Kernel Naive Bayes (kNB), Neural Network (NN), Auto MultiLayer Perceptron (Auto MLP), and Decision Tree (DT), respectively. The main contribution of this paper is the improvement of the classification accuracy of facial expression recognition tasks. In both persondependent and nonpersondependent experiments we showed that using a combination of these classifier combinations gave significantly better results than using individual classifiers. It has been observed from experiments that the overall voting technique by voting achieves the best classification accuracy.
|
0 |
2022 |
Pengaruh Kualitas Pelayanan Dokter Terhadap Kepuasan Pasien di Rumah Sakit Kanker Dharmais (RSKD)
(Joni Tesmanto, Nijan Subarja)
DOI : 10.55606/jumbiku.v2i1.69
- Volume: 2,
Issue: 1,
Sitasi : 0 20-Apr-2022
| Abstrak
| PDF File
| Resource
| Last.19-Aug-2025
Abstrak:
Bisnis dalam bidang kesehatan atau rumah sakit semakin tajam di era globalisasi. Hal ini menuntut pengelola atau perusahaan rumah sakit kanker dharmais untuk siap bersaing. Pelaksanaan pelatihan pelayanan dokter pada Rumah Sakit Kanker Dharmaissudah berjalan sesuai dengan SOP.Rumah Sakit Kanker Dharmais telah menetapkan standar fasilitas Rumah Sakit dan pelayanan dokter yang baik, serta pengaruhnya terhadap tingkat kepuasan pasien pada Rumah Sakit Kanker Dharmais sangat berhubungan.
Pelayanan yang baik merupakan penentu keberhasilan tingkat kepuasan pasien. Meski begitu, fasilitas yang lengkap tetap menjadi prioritas. Pelayanan dan fasilitas yang semakin baik akan berbanding lurus dengan kepuasan pasien, namun sebaliknya jika menurun maka akan berdampak pada jumlah pasien. Kualitas pelayanan dokter secara simultan berpengaruh positif terhadap kepuasan pasien.
Berdasarkan hasil analisis yang telah dilakukan maka saran yang diberikan adalah fasilitas rumah sakit merupakan salah satu faktor yang mempengaruhi kepuasan pasien di Rumah Sakit Kanker Dharmais. Rumah sakit harus selalu meningkatkan fasilitas dari waktu ke waktu dan mengikuti perkembangan teknologi kedokteran terkini. RS Kanker Dharmais juga diharapkan mampu mempertahankan bahkan meningkatkan kualitas pelayanan dokter kepada pasien agar pasien tidak berpindah ke rumah sakit lain dan dapat meningkatkan jumlah pasien. Sebisa mungkin ciptakan suasana yang aman, nyaman, dan bersahabat bagi pasien sehingga pasien merasa dihargai dan dihormati.
|
0 |
2022 |
PENGARUH RASIO SOLVABILITAS DAN RASIO PROFITABILITAS TERHADAP PENGUKURAN KINERJA KEUANGAN PERUSAHAAN DI PT BCA Tbk
(Joni Tesmanto, Naftalia Meilani Angeline)
DOI : 10.55606/jurimea.v2i1.110
- Volume: 2,
Issue: 1,
Sitasi : 0 02-Mar-2022
| Abstrak
| PDF File
| Resource
| Last.19-Aug-2025
Abstrak:
The use of financial ratios will explain and provide an overview of the bank's financial position and see the bank's wealth. Of the Solvency ratio (CAR) and Profitability ratio (ROA, ROE, NIM) on financial performance (profit). The data used is secondary data with data collection techniques through indirect observation. CAR regression coefficient on earnings is negative with the results of the t-test -5.312 < t table 2.04. The regression coefficient of ROA on earnings is positive with the results of the t-test 2.409 > t table 2.043 which means that ROA has an effect on earnings. profit. The NIM regression coefficient on earnings is positive with the t-test result of 0.770 < 2.043, which means that NIM has no effect on earnings. Overall F count of 8,560 > F table 2.70 which means that CAR, ROA, ROE and NIM together have an influence on profit.
|
0 |
2022 |
PENGARUH KUALITAS LAYANAN TERHADAP KEPUASAN NASABAH PT BANK CENTRAL ASIA, TBK CAB KYAI CARINGIN
(Joni, Surry Putri Rustiani)
DOI : 10.55606/jupumi.v1i1.246
- Volume: 1,
Issue: 1,
Sitasi : 0 19-Jan-2022
| Abstrak
| PDF File
| Resource
| Last.19-Aug-2025
Abstrak:
PT Bank Central Asia, Tbk KCP Kyai Caringin continues to raise public funds. To achieve this, we need the right strategy through optimal service by improving product quality and offering it to customers according to customers desires and needs, as well as providing the best service. Effort to provide optimal service to customers must pay attention to the factor needed by customers. Customer satisfaction is very important because by knowing the level of customer satisfaction, we can find out how far the quality of services provided by employees has an effect on customer satisfaction
|
0 |
2022 |
PENGARUH ADMINISTRASI PENDIDIKAN BAGI DISIPLIN KERJA GURU DI SDN LENGGAHSARI 02 KECAMATAN CABANGBUNGIN BEKASI
(Joni Tesmanto, Firman Ardiansyah)
DOI : 10.55606/jupsim.v1i1.234
- Volume: 1,
Issue: 1,
Sitasi : 0 19-Jan-2022
| Abstrak
| PDF File
| Resource
| Last.19-Aug-2025
Abstrak:
In the Lennggahsari 02 State Elementary School, Kecamatan Cabangbungin, Kabupaten Bekasi, there were problems that started from the teacher's work discipline that needed to be improved. This is indicated by the existence of overlapping work activities, delaying some activities, limited management to innovate and the unintegrated work team of teachers. In terms of personnel, it can be seen that there are problems such as: There are teachers who come late from the appointed time, there are teachers who go home before the end of school hours, there are teachers who are not present without giving a clear reason. The existence of the above teacher discipline constraints can be caused by various factors, such as: Leadership, Planning, Directing, Coordination, Educational Administration, Organizational Culture, Organizational Behavior, Salary System, Position Promotion, Educational Background and Family. In this study, the author tries to examine work discipline in relation to educational planning and administration.
The method used in this study is descriptive associative survey method. In this method there are at least two variables. This associative research is a relationship between two variables, namely education administration and teacher work discipline.
Based on the formulation of the results of the research at the Lenggahsari State Elementary School 02 Lenggahsari Village, Branchbungin District, it is presented that there is a positive relationship between the Education Administration Variable (X) and the Teacher Work Discipline Variable (Y). The higher the value of Education Administration, the Discipline of Teacher Work will increase.
|
0 |
2022 |
|
0 |
2021 |
Perancangan Sistem Kontrol CNC Pengebor PCB Otomatis Berbasis Raspberry PI
(Eka Satrio, Koko Joni, Kunto Aji Wibisono)
DOI : 10.26623/elektrika.v13i1.3125
- Volume: 13,
Issue: 1,
Sitasi : 0 24-May-2021
| Abstrak
| PDF File
| Resource
| Last.09-Jul-2025
Abstrak:
<p><em>Circuit</em><em> </em><em>Board (PCB) is a micro-board containing</em><em> </em><em>various components</em><em> </em><em>electronics used in an automatic circuit. In PCB drilling is usually done</em><em> </em><em>human</em><em> </em><em>which takes a lot}when the hole in the PCB is getting more and more. And it takes precision when the eye</em><em> </em><em>touches the PCB board which gives rise to friction force and can cause</em><em> </em><em>drilling. The purpose of this research was the development of tools in the form of automated drills using computers with BCNC software as face-to-face CNC movements. The engine is driven with stepper motor and dc motor as spindle. In this BCNC software the drilling process is done by entering the codes in the form of gcode which can later be read by CNC. The coordinates of the holes in the layout that have been created are obtained by converting the layout into codes called gcode. The process is carried out using PCB designer software. Thoroughness testing on all six axes found an error </em><em>1,2</em><em>% with ten attempts each. PID implementation on DC motor obtained constant value Kp = 54,</em><em> </em><em>Ki = 38 and Kd = 0.9. As well as before drilling, the installation of drill bits must be precise so that at the time of spinning, the drill bits do not shake.</em></p>
|
0 |
2021 |