Identifikasi dampak dari jenis olahraga terhadap kekuatan genggam tangan telah dilakukan melalui pengukuran kekuatan genggam tangan dengan menggunakan hand-dynamometer. Identifikasi ini merupakan salah satu metode yang valid, sederhana, cepat, mudah dilakukan, tidak menimbulkan efek samping, dan dapat menggambarkan kekuatan seluruh tubuh. Kekuatan genggam tangan telah banyak digunakan sebagai parameter fungsionalitas dua puluh tujuh anggota tubuh bagian atas dan kesehatan umum. Jenis penelitian ini adalah deskriptif kuantitatif dengan sampel berjumlah 40 mahasiwa Jurusan Pendidikan Olahraga Universitas Kristen Satya Wacana (UKSW). Dari hasil pengelompokan sampel didapatkan dua kelompok bidang minat berbeda, tujuh belas mahasiswa memiliki bidang minat dalam olahraga yang banyak menggunakan tangan (basket, voli, badminton, dan tenis meja) dan dua puluh tiga mahasiswa memiliki bidang minat dalam olahraga yang banyak menggunakan kaki (sepak bola, futsal, dan marathon). Uji statistik yang digunakan adalah uji One Way Anova dan Regresi Linier dengan tingkat kebenaran 0,05. Dari uji One Way Anova didapatkan nilai signifikansi sebesar 0,000 N dan 0,000 Ns. Angka ini menunjukkan bahwa terdapat dampak yang signifikan antara jenis olahraga terhadap kekuatan genggam tangan. Dari uji Regresi Linier juga didapatkan nilai signifikansi sebesar 0,000 N dan 0,000 Ns yang menunjukkan bahwa terdapat dampak dari jenis olahraga terhadap kekuatan genggam tangan.

Practical work at PSTA-BATAN to find paraffin design and the design of mobile devices with Monte Carlo N Particle (MCNP) software. The method used is to determine the paraffin design and calculate the volume of paraffin. The resulting intact writing that modeled with the MCNP. Shielding is required to absorb the leaking radiation until the 20 mSv / year Dose Limit Value for radiation workers is met. The material used is paraffin. Calculation is done by using MCNPX calculation facility with tariff of 10,42 ?Sv / hour. The paraffin design criteria are built on recommendations from Indonesian Journal of Physics and Nuclear Applications Volume 1, Number 1, February 2016. Some of the above-standard methods are overcome with the protection aspects of distance and radiation time. Paraffin used is made of hydrocarbons suitable for strengthening shielding structures and for absorbing gamma radiation.
 

The problems of this research are: 1) how to develop the approach of societal technology science?; 2) how is the feasibility approach of societal technology science; 3) is the approach of society technology science can cultivate the inspirational attitude?. This is a mixture between qualitatif and quantitative research. Qualitative research was chosen to describe the application of the society technology science. Quantitative research which is a pre-experimental design of one–group Pretest-Postest design, is to see the understanding and change of students’ character before and after the application of the model. The learning model development used the ADDIE (Analysis, Design, Develop, Implemen, Evaluation) design model. The results of this research are: 1) the development of society technology science approach to realize inspiring character was done through 5 stages. With the preliminary stages of approach, establishment/development concept, application in life, the improvement of concept, and assessment; 2) the approach of society technology science to create an inspiring attitude that has been developed, is declared feasible to be used with a score of 15 (90%) in ‘very decent’ criteria; 3) social technology science approach has reflected an inspiring attitude. This is shown from observations on the coursework and results of the student's work that earned an average yield of 3.6 on a ‘good’ category (90%). It is suggested planning a more mature, fuller and wider concept mastery component.

Based Studies were carried out to analyze the internal dose of radiation for workers at Boron Neutron Capture Therapy (BNCT) facility base on Cyclotron 30 MeV with BSA and a room that was actually designed before. This internal dose analyzation included interaction between neutrons and air. The air contained N2 (72%), O2 (20%), Ar (0.93%), CO2, Neon, Kripton, Xenon, Helium and Methane. That internal dose to the worker should be below the dose limit for radiation workers which is an amount of 20 mSv/years. From the particles that are present in the air, only Nitrogen and Argon can change into radioactive element. Nitrogen-14 activated to Carbon-14, Nitrogen-15 activated to Nitrogen-16, and Argon-40 activated to Argon-41. Calculation using tally facility in Monte Carlo N Particle version Extended (MCNPX) program for calculated Neutron flux in the air 3.16x107 Neutron/cm2s. The room design in the cancer facility has a measurement of 200 cm in length, 200 cm in width, and 166.40 cm in height. Neutron flux can be used to calculate the reaction rate which is 80.1x10-2 reaction/cm3s for carbon-14 and 8.75x10-5 reaction/cm3s. The internal dose exposed to the radiation worker is 9.08E-9 µSv.

The implementation of 4G LTE network and its advantages gave us faster speed of mobile network. We need to know the performance of LTE mobile network in Sokaraja Tengah – Indonesia, which deployed by Telkomsel network provider by comparing its  RSRP, SINR, RSRQ, and throughput using drive test method of Genex Probe. Signal performance was measured by drive test dedicated mode on the streamed videos and analyzed with Genex Assistant. The result shows that generally Telkomsel’s 4G LTE network in Sokaraja Tengah has 99.7% of (-70) – (-90) dBm RSRP value, 85.09% of 1-15 SINR value, 99.23% of (-15)-0 dBm RSRQ value, average uplink 2575 kbps and downlink 1530 kbps of throughput.

The purpose of this study is to determine the characteristics of the cooling system on the new design of the Kartini Reactor plate fuel based on numerical calculations (Computational Fluid Dynamics). The fuel plate model was simplified and made in 3D. The model dimensions are 17.3 mm x 68 mm x 900 mm. The space between the two plates called the narrow rectangular channels has a gap of 2 mm. On these simulations a heat flux of 10612,7 watt/m2 was used which was obtained from the MCNP calculation program. Simulations were conducted in a steady state condition and single-phase model laminar flow of an incompressible fluid through the gap between the two fuel plates. This simulation uses UDF (User Define Function) to approach heat flux behaviour that follows the neutron distribution in the reactor core. The simulation results show that the maximum temperature that occur at a flow rate of 0.01 m/s was 43.5 °C.

The implementation of inclusive education in reality, really requires readiness and support from various parties, including fron the educators who are ready in the sense of being able and willing to educate children with special needs. The focus of this study is to examine the perceptions of pre-service teachers in Pelita Harapan University for children with special needs who have access to inclusive education, and what factors underlie these perceptions. The next focus is whether the pre-service teachers have the readiness or vice versa just that there is still doubt or reluctance to teach in inclusive schools. The research method is qualitative descriptive. The number of respondents was one class consisting of 40 students which was a combination of 2 two study programs. The results showed that pre service teachers had perceptions that children with special needs could attend school in inclusive schools, and will be successfull. The arguments that underlie these perceptions are three things: the equal right to education for everyone; curriculumadjustment, teaching methods, assessments and facilities for students with special needs; inclusive schools are a combination of public schools with special schools, and adjustments for each child with special needs in the form of PPI (Individual Development Program). All respondents stated their readiness to teach in inclusive schools. The reason are because a teacher should treat his student equally, the subject of Teaching Student With Special Ability courses has equipped them, and adjustments made in inclusive schools in terms of methods, curriculum, assessment and infrastructure.

Mesin Stirling merupakan teknologi yang memanfaatkan perbedaan suhu sebagai pendorong gerak berkelanjutan. Karena itu dari sudut pandang pembelajaran, konsep dasar dan prinsip kerja mesin ini sangat berguna untuk mendemonstrasikan aplikasi termodinamika dalam teknologi. Penelitian pengembangan ini bertujuan untuk menghasilkan model mesin Stirling dengan memanfaatkan teknologi 3D printing untuk menghasilkan komponen-komponen mesin yang dirancang sesuai fungsi dengan perangkat lunak Autodesk Fusion 360. Komponen ruang udara (chamber) memanfaatkan semprotan kaca (syringe) 10 ml. Sumber energi penggerak adalah nyala api dari pembakar spiritus. Mesin ini dapat beroperasi lebih dari 5 menit secara terus-menerus tanpa pendingin. Prinsip kerja dan lama beroperasinya mesin ini memungkinkan siswa melakukan eksplorasi berbagai parameter yang menentukan kecepatan, lama operasi, dan kekuatan putar (torka) sehingga dapat menjadi media belajar yang interaktif.

Critical thinking skills need to be developed in learning activities because these skills are needed by students especially in solving problems both in everyday life and for the future. Based on research that has been done, students' critical thinking skills can be developed by implementing the rally coach learning model in mathematics learning activities. Rally coach is a cooperative learning model. From the research results obtained using descriptive research methods with a qualitative approach, students' critical thinking skills have increased significantly which indicates that the implementation of the rally coach learning model was declared successful. This study has been done using CAR (Class Action Research) method with 4 cycles. As part of the research, to find out an increase in accordance with expected, researchers designed a test instrument that has been tested for validity and reliability using the content validity ratio (CVR) method and the Cronbach Alpha formula. The results that have been obtained show in detail that the rally coach learning model provides an excellent contribution to improving students' critical thinking skills.

Optimized Link State Routing (OLSR)is one of the two standard for mesh networks. OLSR is a link state routing protocol, which use hallo message and topology control (TC) to determine the link state information across the mobile ad-hoc network. OLSR is widely used in the wireless mesh network. Raspberry Pi is a mini computer which can be used as a node router to replace the function of a router in a wireless mesh network. In this research, Raspberry Pi is used as a router nodes to determine the performance of routing protocol OLSR. The parameters used to measure its performance is self-configure time, self-healing and bandwidth usage. The test results showed that the use of routing protocols OLSR on the Raspberry Pi in a wireless mesh network proved able to repair itself if there is a problem on the network since it has ability to self-configure and self-healing.