Publication Search

Coloring materials for fabric painting can be produced from natural dyes and synthetic dyes. Natural and synthetic dyes have their respective advantages and disadvantages. The combination of the two colors will give the impression of a brighter color, and slightly reduce environmental pollution. The objectives of this research are: 1) Knowing the processing of synthetic and natural dyes for fabric painting; 2) Knowing the results of applying synthetic and natural dyes to fabric painting. The method used in this research is the research and development approach model Research and Development (R&D) and data analysis. Trials in this study were carried out with dye using 4 types of cloth with the help of a validator as an assessor of the coloring results. The results of this study indicate that synthetic dyes are lighter than natural dyes. Meanwhile, the colors produced from natural dyes tend to be darker. In painting this cloth, the writer needs a combination of dark and light colors. Therefore, the use of synthetic and natural dyes requires mixing of colors. The fading test conducted by the author for the color absorption of diamond crape on the fabric is very good. Thus it can be concluded that the use of natural and synthetic dyes can be applied to fabric painting by conducting trials first to get the right color.

Indonesia is an agricultural country that has great potential for the development of tropical fruits, horticultural crops and vegetables. Vegetables are important foods that are needed by the body because they contain nutrients needed by the body. However, some sweet potatoes that contain nutrients have not been adequately studied and utilized, including sweet potato (Ipomoea batatas L) from the Convulvulaceae family (Suparman, 2007). Sweet potato plants (Ipomoea batatas L) from 1968 until now have been widely produced, even Indonesia was the fourth largest country that produced sweet potato plants.The objectives of this study were: 1) Knowing the process of making purple sweet potato Gel candy; 2) Knowing consumer acceptance of purple sweet potato Gel candy products; 3) Knowing the nutritional content of purple sweet potato Gel candy. The methods used in this research include literary, documentation, experimental, organoleptic, hedonic and nutritional content methods. The resulting data is then processed and evaluated and then presented in tables and diagrams with in-depth explanations.The results showed that the best formula composition is found in code 472 The characteristics of the purple sweet potato gel candy produced are sweet and sour taste, candy aroma, solid chewy texture, light purple color. The panelists' acceptance of the making of purple sweet potato gel candy through the hedonic test results showed that the most favored by the Panelists were the product code 472 with a composition of 60 grams of sweet potato, 75 grams of gelatin, 75 grams of sugar, 1 gram of himalaya salt.

The objective is to determine the effect of compliance, on tax violations and the presentation of means of transportation to make tax payment transactions for vehicle transportation equipment. This research was conducted at SAMSAT Semarang City. The amount of data taken by the sample is 100 by collecting data. The search for the number of respondents was carried out by means of questions and answers, questionnaires. The results of this study, the data can be seen that the effect of compliance, on the violation of the Vehicle Transportation Tax to pay the vehicle tax at the Semarang City SAMSAT Office

Fixed assets are one of the elements in the financial statements, the value of fixed assets in companies tends to be in large amounts. Investments in fixed assets by the company are intended to support the company's business activities. Every transaction that affects changes in fixed assets must be managed in order to produce information in the form of financial statements. Improper handling of fixed assets will have an impact on finances and improper handling of fixed assets because they still practice a manual system that allows for various problems in financial reporting. The research objective is to build an accounting information system for depreciation of the company's fixed assets which produces output in the form of fixed asset information that can facilitate management in making business decisions. The research method uses research and development methods, using six steps from ten steps of the R&D model. The system development model uses the Prototype model approach to produce products according to user needs. This research produces a fixed asset management information system product that is able to assist in handling fixed asset management transactions and the information system is capable of producing fixed asset accounting information quickly. Keywords: Accounting Information Systems, Fixed Assets, Straight-Line Method and Total Production

Main Objective: The objective of this research is to complete the exciting and fictive effects of each color and lighting type when practiced in 3D animation setting. In addition, this research also proposes several lighting design recommendations in 3D animation. Background problem: The main sense for the advance of animated films is cinematic lighting effects. Various techniques and approaches have been planned to create lighting effects, but how these effects affect the viewer’s sentimental sense and especially the storytelling practice is not understood. Novelty: The results of the emotional effects of lighting styles show that these effects are not shown in an imposing aspect, which means, not all lighting style affects the feelings on each scale. In this study, several differences were found in several color scales with different cinematic meanings. Research Method: The research method used is quantitative and subjective data analysis adopting a qualitative grounded theory coding with several animated video scenes developed with various colors and low and high-key statistical lighting designs to analyze and measure the effects of different lighting designs. Finding/Result: The finding of this study indicate that cinematic lighting influences the emotional impact of scenes and stories in plan. Conclusion: This study also confirms the current lighting approach, according to the result of this study, it brings guidance on how certain lighting and color techniques can be adopted to influence the audience in 3D animation about feelings and story perception Keywords: Cinematic Lighting, 3D animation, Emotional Storytelling

The biggest problem for children who are faced with the law is because of Law no. 3 of 1997 regarding Juvenile Court is no longer relevant, both from the juridical, philosophical and sociological aspects. This law does not provide the right solution for the handling of children as children in conflict with the law. Children who are in conflict with the law that is resolved in court, result in mental and psychological pressure on the child who is in conflict with the law, thus disturbing the child's development and development. Thus, there is a need for a criminal law policy in handling bullying. The research method used in this research is juridical empirical by looking at the facts that exist in practice in the field. The research objective is to explain policies in law enforcement against child bullies. Settlement of the criminal law for bullying offenders against student victims of violence at school has not been going well because bullying has not been regulated in a law that specifically regulates it.   Keywords : children, underage, criminal law, policy, bullying.

Dian Wacana Demak Christian Kindergarten-Kindergarten School, which is one of the agencies engaged in the science and early childhood education. The type of data used is qualitative and quantitative data. The research objective is to design an effective and efficient school financial administration recording information system and design a school financial administration recording information system that has a system security that can maintain the correctness of the data. The research method used is the Borg and Gall R&D Development Research model, the Prototyping System Development Method to produce a product in the form of a prototype with 6 stages: Research and Data Collection, Planning, Initial Product Development, Product Testing, Product Revision, Final Trial. The conclusion from the results of this study is that this system can facilitate the recording of cash in and cash out transactions so that there are no mistakes in recording, users can easily present cash reports more quickly so that they can minimize recording time and recording errors, and make it easier for users to print. cash reports with accurate results so as to support and speed up decision making.

This community service is in the form of delivering material exposure to the Implementation of 4C in the 21st Century Era in Integrative Thematic Learning to Teachers of SD Mojosongo III Surakarta. Community service by presenting teachers, school principals and in material presentation and interactive question and answer events to the level of mastery of SD Mojosongo III Surakarta teachers regarding the Implementation of 4C in the 21st Century Era in Integrative Thematic Learning for SD Mojosongo III Surakarta Teachers is intended to be able understand the essence of 4C in learning to support the smoothness of the learning process as well as theoretical clarity and a better understanding of learning, learning objects and learning situations and conditions in elementary schools. The delivery of this material to all teachers at SD Mojosongo III Surakarta, school principals and school supervisors totaling 25 teachers, both classroom and sports teachers, religion teachers and art teachers from parallel classes at the school. With the hope of teachers in the learning process in the classroom so that aspects of teacher knowledge and skills can further improve the abilities and professionalism of primary school teachers. Providing a scientific basis for elementary school teachers in understanding the essence of 4C Implementation in the 21st Century Era in Integrative Thematic Learning which consists of Communication, Collaboration, Critical Thinking and Creativity, and provide theoretical clarity and understanding better about learning, learning objects and learning situations and conditions in Primary Schools. The implementation will be held on Monday, July 15 2020 in the SD Mojosongo III Surakarta classroom with a 6 hour implementation time pattern, starting at 8.00 WIB until 15.00 WIB. The objectives of this community service are (1). Provide a scientific basis for elementary school teachers in understanding learning in the 21st Century Era in Integrative Thematic Learning (2). Provide theoretical clarity and better understanding of 4C communication, collaboration, critical thinking, creativity in learning in the 21st Century Era Keywords: 4C in the 21st century, communication, collaboration, critical thinking,

This research, in general, aims to improve the learning outcomes of class X MIPA 4 students of MAN 1 Grobogan in the 2018/2019 academic year by implementing multimedia learning. And specifically it aims to make students able to achieve the learning objectives by producing a minimum KKM score of 70 and at least 80% of the total students are able to reach this minimum limit. The research method used in this research is the Classroom Action Research Method or better known as the Classroom Action Research (PTK) method. The PTK method is a process of assessing learning problems in the classroom through self-reflection in an effort to solve these problems by taking planned actions in real situations and analyzing any effects of these treatments. The results of research conducted on class X MIPA 4 MAN 1 Grobogan, the application of multimedia presentation learning media on the basic laws of chemistry and stoichiometry with the concept of enjoyful learning can improve student learning outcomes. That the application of multimedia presentation learning media can improve student learning outcomes in chemistry, especially in the material of the basic laws of chemistry and stoichiometry

financial information in schools. Payment information which is the basis for schools to determine future policies. The object of research in this thesis is the Demak Development High School which is one of the agencies engaged in the field of science and education. The research objective is to design an effective and efficient school payment administration recording information system and design a school payment administration recording information system that has a system security that can maintain the accuracy of the data. The research method used is the Borg and Gall R&D Development Research model, the Prototyping System Development Method to produce a product in the form of a Prototype with 6 stages: Research and Data Collection, Planning, Initial Product Development, Product Testing, Product Revision, Final Trial. The conclusion from the results of this study is that this system can facilitate the recording of administrative payment transactions so that there are no mistakes in recording, users can easily present payment reports more quickly so that they can minimize recording time and recording errors, and make it easier for users to print payment reports with affectic and efficient results so as to support and accelerate decision making

Camisole is one of the underwear that is commonly used to improve body shape so that it looks more beautiful and proportional. Most of the camisole is made by using a baleine stitch and attachd to the main material, this time the writer wants to try new things in making a camisole. Such as selection and placement Baleine on a camisole as a complement to a party outfit. The objectives of this research are: 1) To know the right type of baleine on a camisole; 2) Can know the placement of baleine on a camisole. The methods used in the selection and placement of baleine on a camisole as a complement to the party dress are: 1) R&D method; 2) Data Analysis. The selection and placement of Baleine on the camisole as a complement to the party outfit begins with determining the design. Camisole design to be made, preparation of tools and materials, taking measurements, making basic patterns, breaking patterns, cutting steps, and determining baleinejahit and baleine stitches that will be installed on the main material or will be attached to the furing (sewing process). Baleine installation can be done in two ways, namely attaching it to the main material and attaching it to the lining. It turns out that baleine sewing is more effective for making camisole, the result of a camisole that uses baleine sewing looks firm and good when used.

AbstractPartners in the Community Partnership Program activities are Pande Besi PRASOJO located in Nangsri Kidul RT 2 / IV Nangsri Kebakkramat Karanganyar and Pande Besi MANDIRI located at  Dondong RT 2/IX Klumprit Mojolaban Sukoharjo. The two partners are traditional blacksmiths. The problems faced by the two partners are relatively the same, namely: 1) traditional / conventional production processes; 2) do not apply the principles of Occupational Health & Safety. Solutions that will be carried out from this activity are: 1) production of blower and grinding tools; 2) the use of personal protective equipment (PPE). The method that will be carried out to realize the objectives of the PKM implementation program is through: 1) Procurement of electric blowers and grinders for both partners; 2) Increased knowledge and training in the use of personal protective equipment (PPE). In this method both partner SMEs are involved in each activity starting from problem identification, action analysis, action planning and implementation of activities. Through this method, the identified problems and actions to be taken are bottom up proposals. So that every action that will be carried out is right on target and is able to realize the objectives to be achieved maximally. The results of the Community Partnership Program activities were Pande Besi PRASOJO and Pande Besi MANDIRI succeeded in increasing the quantity and quality of products through the procurement of blower and grinding tools. Both partners have also implemented occupational health and safety principles through increased knowledge and use of PPE.