Publication Search

The inventory system is one of the most important managerial functions, because the majority of companies involve large investments in this aspect, as well as for PT Sango Ceramics Indonesia which uses a lot of inventory in the field of planning and controlling its inventory costs. PT Sango Ceramics Indonesia is a company engaged in the ceramic industry. Problems that often occur so far include the company not determining the frequency of ordering raw materials and storing raw materials, as a result the costs incurred by the company for ordering raw materials are quite high, and the absence of a safety stock to anticipate uncertain inventory needs. The Periodic Review method is a method that can help the process of controlling raw material inventory costs. This method uses an approach to the concept of the number of orders economically used in each period which is a diverse demand. The application of the Periodic Review Method (R, s, s) policy on the inventory system is able to produce a lower total inventory cost, order volume and inventory levels in a balanced manner. . Judging from these problems, the authors need to redesign the stock information system using a computer-based system, namely Microsoft Visual Basic. System design using Qlient Server which consists of input design, system design and procedure, output design fiber. This new system is expected to be able to overcome the weaknesses of the previously used information system.

An application is usually used by several users where each user has access rights to certain forms in accordance with their authority or position. For example, the Inventory application or inventory is used by the Manager to view reports, the Warehouse section to check the stock of goods and the cashier to make purchases and sales transactions. Another example is the Academic Value application used by the Administration to input student and course data, Lecturers to input academic value data and Students to view academic value data. Access rights to use certain forms can be set directly in the program code with the consequence that if there is a change in access rights by certain users, you must change the program code, this is not a problem if the company can still contact the programmer to change the program code according to changes in user access rights but it will be a problem if the program maker cannot be contacted by the company to change the program code according to changes in user access rights.

Fixed assets are one of the elements in the financial statements, the value of fixed assets in companies tends to be in large amounts. Investments in fixed assets by the company are intended to support the company's business activities. Every transaction that affects changes in fixed assets must be managed in order to produce information in the form of financial statements. Improper handling of fixed assets will have an impact on finances and improper handling of fixed assets because they still practice a manual system that allows for various problems in financial reporting. The research objective is to build an accounting information system for depreciation of the company's fixed assets which produces output in the form of fixed asset information that can facilitate management in making business decisions. The research method uses research and development methods, using six steps from ten steps of the R&D model. The system development model uses the Prototype model approach to produce products according to user needs. This research produces a fixed asset management information system product that is able to assist in handling fixed asset management transactions and the information system is capable of producing fixed asset accounting information quickly. Keywords: Accounting Information Systems, Fixed Assets, Straight-Line Method and Total Production

Sinar Harapan store which is engaged in construction materials has regular customers who are outside the area, so a sales information system is needed to help customers buy and receive product information from the store. This web-based information system can help shop customers shop online without having to visit the store in person. The purpose of this research is to design and implement a web-based merchandise sales system at the Sinar Harapan Makassar store. Data obtained through field research, library research and interviews. The system design uses PHP as a programming language and MySQL as the database storage. The information system for selling goods is based on the Sinar Harapan Makassar Store based on the results of the implementation test with the user acceptance test getting an average weight of 36 with a percentage of 90% so this application is very suitable for use

SMK Negeri 11 Semarang is a school that has four competency skills, namely Graphic Preparation, Graphic Production, Multimedia, and Animation. Every time they enter the beginning of the school year, school socialization and skills competencies are carried out to new students through the Student Orientation Period, using the lecture method from each of the Head of Skills Competencies. Researchers have created an attractive and informative audio-visual presentation media, packed with docudrama stories, namely documentary films. The results of validation tests conducted by expert experts and users show that the documentary films that have been developed by researchers fall into the very good criteria with a percentage of 93.75%. In addition, through the use of the 228 new students as respondents, it can be concluded that the documentary film developed by the author falls into the good criteria with a percentage of 61%.

Transportation is a very important aspect of its existence in society, both the transportation of people and goods. One of the well-known online transportation companies in Indonesia is PT Gojek Indonesia. During its development, there have been actions committed by unscrupulous people in the community that harm online motorcycle taxi drivers, namely fictitious / fake orders. Fictitious Order is an order that starts with creating a fake account through an online transportation application that can harm the company.The problem is what is the form of the agreement between the driver and the user and is there the responsibility of PT Gojek Indonesia. The method used in this research is sociological juridical, with data sources in the form of interviews. The results of the analysis were presented descriptively and analytically.The results show that there is no legal regulation that regulates protection for Gojek drivers who experience fictional orders. But from the PT. Gojek provides compensation in the form of compensation money. However, this is not widely used by drivers, because the process of disbursing compensation money takes time, so the driver as the victim prefers to bring the results of the fictitious order himself or sell it to someone else.  Keywords: Protection, Transportation, Gojek

Smartphone retail sales in Indonesia are currently growing very rapidly. Point of Sales Material (POSM) is used to provide information about products to consumers, using displays to stimulate impulsive buying behavior. This study designed a 3D planogram visual media, which can visualize real-time with text, images, and videos. Media that has been developed by researchers is in the very good category with a percentage of 78% for the promoter segment that is more than 1 year and 77% for the new promoter segment who has worked at Samsung retail for less than 1 year. From the results of experalidation and user validation, for the aspect of video visualization and the 3D planogram module that has been developed, the category average AB score is 81-85. The display arrangement process can be done more quickly and precisely because the understanding of the planogram increases.

SD Mardi Rahayu 01 Ungaran is an elementary school. The learning process still uses conventional methods which make students less enthusiastic in participating in learning and tend to get bored with the material presented. The purpose of this research is to develop interactive Javanese script learning media based on multimedia. The development method in this study uses the Research and Development method. Multimedia-based interactive Javanese script learning media is an alternative in the learning process. Based on the results of the validation, the learning media got a feasibility percentage of 92.5% from internal validator, 90% from external validator, and 81% from the results of user trials, so it can be concluded that the learning media developed was categorized as very feasible to use.

The information system for purchases and cash disbursements is one of the entire information systems. In retail sales companies need control of purchases and cash disbursements that are precise and fast. In an effort to minimize sudden out-of-stock inventory, it is necessary to secure an inventory to cope with a sudden out of stock due to delays in purchasing goods that occur at CV. New Space. This is what encourages the author to conduct research on CV. Angkasa Baru and choose the title "Purchasing Information System and Cash Distribution at CV. New Space. In writing this research systemin formation, the author uses the Microsoft Visual Basic 6.0 application, the research writing method uses the Research and Development (R&D) model, while the stages of this research model go through the stages of observation or interviews with parties related to the data required in writing this thesis, stages of designing the application system, designing specifications, validation test stages, revision of validation until the system passes. The development method used by the author is the prototype method, where the system created will be tailored to the needs of the user, if there is a change in the system it will be repaired until the user is satisfied with the system.

Dian Wacana Demak Christian Kindergarten-Kindergarten School, which is one of the agencies engaged in the science and early childhood education. The type of data used is qualitative and quantitative data. The research objective is to design an effective and efficient school financial administration recording information system and design a school financial administration recording information system that has a system security that can maintain the correctness of the data. The research method used is the Borg and Gall R&D Development Research model, the Prototyping System Development Method to produce a product in the form of a prototype with 6 stages: Research and Data Collection, Planning, Initial Product Development, Product Testing, Product Revision, Final Trial. The conclusion from the results of this study is that this system can facilitate the recording of cash in and cash out transactions so that there are no mistakes in recording, users can easily present cash reports more quickly so that they can minimize recording time and recording errors, and make it easier for users to print. cash reports with accurate results so as to support and speed up decision making.

Irrigation is a land irrigation system by damming water sources. Irrigation as the provision, regulation and disposal of water to support agricultural needs. Irrigation is generally used by farmers, especially farmers in rice fields to irrigate and provide water supply to agricultural land, monitoring water stock in rice fields must be done frequently because rice water needs must be balanced with a lack of water supply or excess water supply in rice fields is not good for rice growth . So far, farmers have monitored irrigation channels manually, the location of the rice fields from the farmer's house often causes rice plants to experience scarcity because the floodgates are not opened when the water supply is running low or experiencing water supply. excess because the floodgates are opened for too long, this will greatly disturb the growth of rice plants. Making a monitoring and control system for irrigation channels using a water level sensor installed on the ESP 8266 microcontroller (Wemos D1), the system uses a programming language c. This tool can be used to open the irrigation door if the water supply in the rice fields is below the minimum limit and will close the water gate when the water supply has reached the maximum limit, the servo motor is used to open and close the floodgates. . . The monitoring results obtained will be displayed to users in real time through the android application interface and will be stored in the form of a text file on the storage media.

For blind people, assistive devices to carry out daily activities are needed. If you don't use assistive devices, blind people will experience difficulties when carrying out daily activities such as reaching the obstacles that are near them. In designing the system using the Arduino UNO R3 microcontroller board as a controller, five ultrasonic proximity sensors to determine the distance and position from the user to the front and lower obstacles. In addition, the MP3 module and headseat are used as a marker for sound in the form of sound when detecting an object and the SIM800L module is used to send SMS and the GPS module is used to determine coordinates. The validation test shows the value of 31.5 is between 31- 40 which means that it is located in a Very Good (Valid) value. Keywords: Walking Aid, Blind, Ultrasonic Sensor, Microcontroller, Arduino Uno, GPS

Multimedia learning software development requires design methods, development tools, examination models and proficiency in Information Technology systems. It is necessary to formulate a Holistic Method which considers all related aspects in order to guide the quality of good design in designing Multimedia Learning. Implementing the findings of the Holistic Method formulation to build multimedia learning with good design quality. This study formulates the stages of multimedia development which include: Creative Brief, Design, Material Preparation, Compiling, Testing, Distribution. The multimedia software development process will be guided by 15 guiding elements which are grouped into 5 elements, include : content, appearance, utility aspect, user caracter, and didactic. These guiding elements are used to produce good quality learning multimedia designs. The methodology is called Holistic Multimedia Development Model (HMDM).

Cloud computing is a technology that makes the internet a center for managing data and applications. With computer users are granted access (login). Cloud is a metaphor for the internet, as the cloud is often depicted in computer network diagrams. Gayo’s openwork cloud application is an android bases application that utilizes Cloud computing technology in the form of cloud Platform as a Service (SAAS) function as the main container or basis for running the system that will use in sales and providing notification services for the search for souvenirs typical of Takengon, namely Kerawang Gayo. Cloud computing is a technology that makes the internet a central storage server for managing data and information. This technology also allows users to freely manage and access information available on cloud storage which is of course connected to the internet network. This gayo filigree is now being created as a result of the home craft industry being embroidered on the cloth. The craft produces various types of souvenirs such as bags, key chains, women’s robes, men’s shirts, caps, bracelets, wallets, prayer mats, tablecloths, pillowcases, cellphone covers, and women’s and men’s traditional clothes, skirts, and scarves. Using the prototyping method is a software development method in the form of a physical working model of the system that functions as an early version of the system.

Digital Business is experiencing rapid growth, including in the online-based food business. The Internet is creating a new face in interactive communication between sellers, consumers and business partners. This allows the company to be able to interact and work together continuously to be able to develop products, marketing, delivery and maximum service to get customer satisfaction. One type of business that is currently growing rapidly and is very popular with customers is food delivery services including go food, grab food and shopee food. This delivery service will increasingly compete according to the response from customers, influenced by the quality of service. The purpose of this study was to find out how service quality affects customer satisfaction, especially in online- based food delivery applications. The research used in this research is quantitative analysis method. The method used is to collect information obtained from questionnaires. Variable indicators were tested for validity and reliability. In testing this validity using the Pearson Correlation approach. The reliability test in this study used Cronbach, Alpha coefficient. The results of the study explain that the service variable partially has a positive effect on customer satisfaction. The influence of service quality provided by service providers and service partners is very well responded by application users.

Developing of prototype now are became easier with the existence  of 3 d printer, now is common known as rapid prototyping method. There are many different method on 3d printing depend on material used for printing. The wide range of material that can be print using 3d printer such as metal to plastic even ceramic. The rapid prototyping using 3d printer have various advantage compare to traditional prototyping. The development of 3d printing makes it not only for prototyping but can be a small batch manufacture, where economic scale of production cannot be reach with traditional production. The fast development of computer and internet technology have big impact on the 3d printer development, before the development of reprap 3d printing was only knew by industrialist and manufacturer. After reprap born, 3d printer is became more common to personal user. People can have their 3d printer at home. People can design their own product using CAD software and send it to 3d printer, or send it via internet to print by 3d printing company. Even there ara lot of advantages of 3D printer development , there is some disadvantages of 3d printer, especially on regulation.          

This study generally aims to design an information system that can handle problems in putting and sorting goods into warehouses at CV. Sekar Intan KIC Gatsu, Semarang. In terms of using the Information System, CV. Sekar Intan KIC Gatsu, Semarang. In the transfer and sort of goods in the warehouse still using a manual system when the implementation, warehouse employees must take and place the goods to the warehouse that has been determined each - each type of item, so employees must calculate the number of items when the goods take place, here various problems occur, because it requires some HR to manage the warehouse performance process at CV. Sekar Intan. To support the research, researchers used Research and Development (R & D) research methods through the microcontroller-based moving robot design simulation design stages that have been tested by experts declared valid with Valid validity levels and final product development design simulation prototypes carried out. goods transfer robot uses Arduino IDE development software that is integrated with Arduino Mega 2560, 6 pin line sensor, dc motor, motor driver, servo motor, motor driver, lcd, and has been tested in the field by General Adv. Administration and HRD as users / users and stated to be very effective. Based on the results of the research and discussion, it can be concluded that the robot design system developed can overcome the problems in the old system on the CV. Sekar Intan KIC Gatsu Semarang, so as to produce a system that can facilitate work processes and parking processes for employees to be more effective and efficient.

Augmented Reality (AR) and Virtual Reality (VR) which are one of the top ten strategic technology trends for 2019 and continue to be developed massively in this 2020, have been widely applied in various mobile applications by many companies in this industrial revolution era 4.0. AR can be applied to help the promotion for housing developers where users can see the 3-dimensional shape of the types of houses offered, while VR allows users to explore each part of the house in a virtual 3D. Pre-existing brochures are used as markers for this application to work, so that AR and VR applications can be a complement to promotional media. The design method used in this paper is Research and Development (RnD). Salespeople can offer types of houses to prospective customers without having to print multiple brochures, but with just one brochure and one android smartphone to present, so the promotion costs are more efficient.   Keywords: AR, VR, house.

The purpose of this study was to analyze the effect of management information systems on the work effectiveness of outpatients at the Prof.Dr.H.M Anwar Makkatutu Regional General Hospital, Bantaeng Regency. The type of research used is quantitative research. This research method uses primary data through a survey using a questionnaire as many as 73 outpatient employees of the Regional General Hospital Prof.Dr.H.M Anwar Makkatutu Bantaeng as the research sample. Data were analyzed through univariate and bivariate analysis with Chi-Square test using SPSS program. The results showed that: (1) The quality of the system showed a value of p = 0.001 < from = 0.05, which means it can be concluded that Ho is rejected, meaning that the system user has an effect on the work effectiveness of outpatients at Prof. Hospital. Dr. H. M. Anwar Makkatutu 2020, (2) The quality of information affects the work effectiveness of employees with a p value = 0.000, (3) System users affect the work effectiveness of outpatients with a p value = 0.000, (4) User satisfaction affects the work effectiveness of outpatients path with p value = 0.000. This shows that the quality of the management information system can increase the work effectiveness of outpatient employees at Prof. Hospital. Dr. H. M. Anwar Makkatutu Bantaeng. If the management information system is good, it will increase the work effectiveness of outpatients and increase employee satisfaction.

This study designed a system that is able to assist companies in calculating cash receipts and disbursements. The Accounting Information System for Cash Receipts and Expenditures will be equipped with the use of user log-ins to maintain the level of data security so that not just anyone can misuse the data. The system designed will also be equipped with security of access rights and data storage systems, providing a database using the Visual Basic 6.0 programming language that holds records of cash receipts and disbursements to be a good report, summarizing the process of moving data from ledgers to becoming cash reports flow, and can document each period's report so that it can be grouped properly. The research method used is the Borg and Gall R&D research approach which consists of 10 stages, out of 10 R&D stages the author only conducts the research approach to the 6th stage alone. and monitoring cash flow very well. In addition, it can also produce reports that are precise, accurate and efficient.