Publication Search

The development of information and communication technology in the current digital era is growing very rapidly and affects many aspects of human life, including aspects of children's education. The influence of these technological developments also brings changes to modern lifestyles that have both positive and negative impacts on all levels of society, including the lives of children. The COVID-19 pandemic that has occurred since 2020 also affected the life of the education world, namely changing learning methods of the teaching and learning process in schools. The online learning method is starting to be applied for schools that are ready with this online learning system, which requires a lot of media, such as cellphones, laptops, computers and of course the availability of a good internet network. This government policy came into effect in several provinces in Indonesia on Monday, March 16, 2020, which was also followed by other provincial areas. The changing era and the influence of the development of technology and information can affect children's lives. These are a challenge for a teacher because the teacher's role is very important in the child's education process. This role can be interpreted as individual behavior that is important for the social structure of society. While facing all challenges, the teacher has important role to instill the right character values for students to anticipate all negative influences that can be caused and affect their lives, especially for PAK teachers in carrying out their main duties.

The spirit of the Postmodern era is marked by progress in all areas of human life, both technology, science as well as in philosophy, theology and religion. Particulary in the world of theology, the influence of Postmodernism has had a devastating effect on the lives of both believers and the church. This article is a literature review using a reference book that contains discussion of theology, evangelicalism and the Postmodern era by applying descriptive methods. In conclusion, a healthy and consistent theology is a theology that is centered on God and its orientation is from God by God and for God as Paul says in Romans 11:36.

Security Parking UIN Walisongo Semarang at this time can be said to be in poor condition. The high case of loss of a motor vehicle cause anxiety for the academic community. Parking system that is traditional that is doing the checking of identity cards at the exit of the campus is less effective. Hence the need for a system of security parking modern and computerized, so that activities out of the vehicle can be recorded and stored automatically. Based on these problems, the authors designed a parking Security System as a WEB-based form of increased security parking campus UIN Walisongo Semarang. By using RFID technology (Radio Frequency Identification) are planted on the card identity, which can later be used as an authentication tool typing will enter and exit the campus area. To provide double security, there are Features of the Live Camera with the base website that serves as a tool for monitoring vehicles that are parked in real time. The output of this final project is to produce a prototype security system parking. Not only specialized hardware, but also software design of the System monitoring of vehicles in live Web-based. So the users of the parking facilities can monitor the vehicle anywhere.  

Technology assistance is very helpful for community activities including financial institutions, such as the application of Fintech (Financial Technology). Fintech utilizes technology to improve banking and financial services performed by companies by utilizing software technology. Along with the development, Fintech began to have a negative impact, especially from the money loan service or Fintech Peer to Peer Lending (P2PL). the problem is how is the protection for debtors / customers, such as attempts to intimidate customers who have difficulty paying. The method used in this research is normative juridical, namely research based on secondary data, which is then analyzed qualitatively and presented in a qualitative form.Based on the research results, it can be concluded that protection for debtors or customers who feel disadvantaged can take 5 (five) ways, which are regulated in the Consumer Protection Law, OJK Regulation, ITE Law, BI and Government Regulations. Safeguards in the Consumer Protection Law are accommodated in Article 4. OJK's efforts, in collaboration with Kominfo and AFPI, are that if there is intimidation that is detrimental to the debtor, the debtor can submit a complaint report through the website page provided by the OJK and AFPI. Debtors can also report to the authorities. The ITE Law can be seen in Article 26 of the ITE Law. Efforts made by Bank Indonesia, namely BI to form the Bank Indonesia Fintech Office (BI-FTO) and recommend to follow the existing regulations in PBI No. 16/8 / PBI / 2014 and PBI No 18/17 / PBI / 2016 concerning Electronic Money (PBI E-Money).           Keywords: Financial Technology, Legal Protection, Debtor Efforts

Multimedia learning software development requires design methods, development tools, examination models and proficiency in Information Technology systems. It is necessary to formulate a Holistic Method which considers all related aspects in order to guide the quality of good design in designing Multimedia Learning. Implementing the findings of the Holistic Method formulation to build multimedia learning with good design quality. This study formulates the stages of multimedia development which include: Creative Brief, Design, Material Preparation, Compiling, Testing, Distribution. The multimedia software development process will be guided by 15 guiding elements which are grouped into 5 elements, include : content, appearance, utility aspect, user caracter, and didactic. These guiding elements are used to produce good quality learning multimedia designs. The methodology is called Holistic Multimedia Development Model (HMDM).

The development of technology allows one to obtain other people's spatial position data. One mobile technology that utilizes spatial data as a supported factor is location-based services. The large number of employees at the PT.XYZ causes the presence of a controlled process to be under control, and even tends to be questioned. Because it takes a GPS-based presence system on android that is expected to be a solution of the problems that occur at this time. The system development method used is a six-step R&D method, consisting of: Research and information gathering, Planning, Development of initial product forms, initial field testing, major product revisions, main field testing. The final result is the prototype of the Ganesha Employee Presence System Operations. The test results on the system shows the employee attendance system can run on the android platform. The system only responds to presence based on the position of the employee's coordinates with office coordinates. Besides checking the presence process is also based on devices that have been approved in the system. 

The Madukoro gas station is one of the gas stations in Semarang where the payment and refueling systems are still done manually. In general, the manual payment and filling system has many obstacles, resulting in long queues because the service is not fast and effective, also triggering the exchange of counterfeit money because payment uses cash. The application of e-money technology based on microcontrollers is made to make a payment system using electronic money instead of cash that is integrated with fuel filling, this system aims to reduce the long queues that occur and also prevent the amount of counterfeit money circulating at gas stations and make services more fast and easy. The method used in the design of this system is to use the method of Research and Development (R&D) theory from Borg and Gill, starting with gathering information by interviewing Madukoro gas station supervisors and field surveys then designing and developing systems to overcome the problems obtained in research. The system design uses a microcontroller as a data processor that will retrieve data from a database that was previously inputted from the VB.Net application and e-money reader and outputs to instruct the pump to remove fuel from the tank in accordance with the calibration of fuel output per second. As information on the rest of the fuel in the tangka, this tool uses the help of a load sensor that will be displayed on the LCD. In general, this system will make services faster and easier, thereby reducing the number of long queues, but also to avoid the circulation of counterfeit money in gas stations Madukoro, Semarang.

With the increasing development of technology the more variety of books circulating on the internet. As is the recommendation system on online book sites that provide books relevantly and as needed with one's preferences. One alternative is GoodReads, a social networking site that specializes in cataloging books and users can share reading book recommendations with each other by rating, reviewing, and commenting. As a large book recommendation site, it has a lot of data that can be processed by applying machine learning methods, but still not known as the most accurate model. By using the right model, we can provide more accurate recommendations. Therefore, this study will analyze the data obtained from the www.kaggle.com namely the goodreads-books dataset. This study proposed a data mining classification model to get the best model in recommending books on GoodReads. The algorithms used are Decision Tree, K-Nearest Neighbor, Naïve Bayes, Random Forest, and Support Vector Classifier, then for model evaluation using accuracy, precision, recall, f1-score, confusion matrix, AUC, and Mean Error Absolute. The test results of several classification algorithms found that Decision Tree has the highest accuracy among the methods presented by 99.95%, precision by 100%, recall by 96%, f1-score of 98% with MAE of 0.05 and AUC of 99.96%. This is proof that decision tree algorithms can be used as book recommendations based on book categories on GoodReads.

Cloud computing is a technology that makes the internet a center for managing data and applications. With computer users are granted access (login). Cloud is a metaphor for the internet, as the cloud is often depicted in computer network diagrams. Gayo’s openwork cloud application is an android bases application that utilizes Cloud computing technology in the form of cloud Platform as a Service (SAAS) function as the main container or basis for running the system that will use in sales and providing notification services for the search for souvenirs typical of Takengon, namely Kerawang Gayo. Cloud computing is a technology that makes the internet a central storage server for managing data and information. This technology also allows users to freely manage and access information available on cloud storage which is of course connected to the internet network. This gayo filigree is now being created as a result of the home craft industry being embroidered on the cloth. The craft produces various types of souvenirs such as bags, key chains, women’s robes, men’s shirts, caps, bracelets, wallets, prayer mats, tablecloths, pillowcases, cellphone covers, and women’s and men’s traditional clothes, skirts, and scarves. Using the prototyping method is a software development method in the form of a physical working model of the system that functions as an early version of the system.

Information technology concerning the use of computers in a government service is needed to facilitate a job in an agency. One of them is in the Community Empowerment and Village Government Agency, Central Aceh Regency, where data management for poor households is still using the manual method, the data that is processed can be lost, damaged or infected by a virus, besides that the data is also not managed properly. good and when data is needed, the data will be difficult to find due to the large number of files piling up. With a decision support system using the web, it is hoped that it can help ease the burden on employees who manage recipients of aid for poor families which will be implemented at the BPMPK Office, Central Aceh Regency.

The application of technology in public services has become an indispensable obligation, even for the Village Government of Tidu in Pohjentrek Subdistrict, Pasuruan Regency. Manual approaches in public services are vulnerable to serious problems, such as the risk of losing important documents and the lack of structured recording of documents issued by the Village Government of Tidu. In response to this challenge, a community service effort was undertaken to support the Government and the community of Tidu Village in utilizing the Tidu Village Information Website. The mentoring and training sessions conducted successfully demonstrated that the implementation of the service system by the Village Government of Tidu is much more productive, with time savings and a transition from manual data management to digital format through the village information system.

Developing of prototype now are became easier with the existence  of 3 d printer, now is common known as rapid prototyping method. There are many different method on 3d printing depend on material used for printing. The wide range of material that can be print using 3d printer such as metal to plastic even ceramic. The rapid prototyping using 3d printer have various advantage compare to traditional prototyping. The development of 3d printing makes it not only for prototyping but can be a small batch manufacture, where economic scale of production cannot be reach with traditional production. The fast development of computer and internet technology have big impact on the 3d printer development, before the development of reprap 3d printing was only knew by industrialist and manufacturer. After reprap born, 3d printer is became more common to personal user. People can have their 3d printer at home. People can design their own product using CAD software and send it to 3d printer, or send it via internet to print by 3d printing company. Even there ara lot of advantages of 3D printer development , there is some disadvantages of 3d printer, especially on regulation.          

Technological developments encourage changes in the way decisions are made. In terms of stopping the application of urea fertilizer, farmers still rely on BWD observations. In this study, using the RnD method by directly observing the research location in the farmer group Gapoktan, in the village of Tosari, Kendan district and analyzing the problem then making a prototype which will be tested by experts. In this study, a tool was made using NodeMCU with TCS3200 sensor to detect color, which was then sent via the internet to the database using IoT technology. In this study, using several trials with different parameters of urea fertilizer use and the results of the TCS3200 sensor can detect colors according to what is on the BWD and send data to the database via the internet. In this system, farmers can recommend the use of suitable urea fertilizers outside a certain area so as to minimize errors in the observation on BWD, this will make the use of urea fertilizer to be the right dose.  

The growth of financial technology is filled by digital wallet competition in the industry, one of the most known digital payment in Indonesia is OVO. Even so, the obstacles that OVO has can make users switch to another mobile payment provider. This research aims to analyze the impact on continuance usage intention by customers’ trust, and examine factors that influence trust in terms of gender moderation, the theories developed in this study are Innovation Diffusion Theory and Trust Building Framework. The method used to process data in this study are SEM and PLS. The findings of this research state that continuance usage intention is positively influenced by trust. Trust is significantly influenced by reputation, followed by customization, security, and mobility.

In line with the development of science and technology today, a job that is done requires fast-paced data and information. By getting data and information quickly, the company has the ability to develop faster. Inventory is a very important part for a company. Inventory of goods is one of the tasks of logistics management in a company, namely support in the procurement of goods for the company. In order for this support to be utilized, it is necessary to plan and carry out in an integrated manner, which is interrelated and supports between related elements. CV Sinar Karya Ungaran is a private company which is engaged in the distributor of Electric tools. CV Sinar Karya is located on the road Dabo II / D30 RT6 Nitibuana, Ungaran Regency Semarang Tel. (024) 3584074 - 3584075. This company has a wide enough working area covering Central Java and DIY. Because the working area is quite extensive and the number of processes in and out of goods, the company must be more careful in calculating inventory. In the process of recording and counting inventory at this time the company is still using Microsoft Excel so there are still many obstacles. In the process of recording and counting inventory at this time the company still uses Microsoft Excel. One of the difficulties experienced is the frequent occurrence of errors in making inventory reports. Besides making reports takes longer because there is no computerized database system. With the development of technology, especially in the field of computers, the authors try to create a computer-based inventory program using Visual Basic 6.0. This is expected to help companies in making goods inventory more quickly and accurately.

Augmented Reality (AR) and Virtual Reality (VR) which are one of the top ten strategic technology trends for 2019 and continue to be developed massively in this 2020, have been widely applied in various mobile applications by many companies in this industrial revolution era 4.0. AR can be applied to help the promotion for housing developers where users can see the 3-dimensional shape of the types of houses offered, while VR allows users to explore each part of the house in a virtual 3D. Pre-existing brochures are used as markers for this application to work, so that AR and VR applications can be a complement to promotional media. The design method used in this paper is Research and Development (RnD). Salespeople can offer types of houses to prospective customers without having to print multiple brochures, but with just one brochure and one android smartphone to present, so the promotion costs are more efficient.   Keywords: AR, VR, house.

Recent technological developments determine humans to be creative in creating tools that implement technology in it with the aim of facilitating human tasks in daily activities. Inappropriate use of fertilizers can cause losses, both losses on fertilizer, on plants, as well as on the soil and the environment around fertilization. Losses on plants such as unhealthy plant growth and susceptible to disease pests, plant yields are not as expected or low. From the background above, the writer found an idea to create a system or tool that can help farmers in determining the dose of Nitrogen fertilizer in their rice plants, through the storage of the dosage data of each land. The user did five scans, from each scan producing RGB values, each RGB value from five samples was then matched with the BWD dose color indicator. The sample dose results are then sent by the NodeMcu microcontroller to the webserver database. Based on the assessment of the test conducted by 10 Users by Gapoktan Farmers Group of Tosari Kendal Village, the total value of 372 that has been averaged to be 37.2 is between 31 - 40 which is classified in the category of "Very Valid or Very Effective".

The advancement of information technology especially in computerized systems is snowballing. It is also backed by a range of demands from industry/ companies that want to abandon the conventional way of conducting business operations to the use of information technology. MÈMORE is a company engaged in the decoration and crafts industry. The company is now using a computerized system in the form of Microsoft Excel software to monitor the company's income and expense and the company often maintains a separate report in a special book. However, this causes problems for these businesses as there is no more efficient method for data processing or for handling the income and expense. In order to solve the problems of the company, a computerized system of financial management is required that will be tailored to the problems and needs of the owner of the business in order to support the company's growth with reliable, managed, and safe financial data. The system can also differentiate its use between the owner and the employee. It is useful for ensuring the confidentiality and protection of company revenue and expenditure data. 

Facing the challenges of an increasingly developing era, changes will continue to occur in all aspects of life, including one in the world of education. A study needs to be conducted to anticipate increasingly rapid developments, both in Christian and secular theological education. The influence of the challenges of the era will create positive and negative changes, for that it is necessary to conduct an investigation in a study. This study was conducted to investigate the influence of technology-based training on improving professional skills in the field of Christian theology. Integrating the influence of technology-based training in Christian theological education can be an effective strategy for developing relevant and competitive professional skills. Professional skills in the field of Christian theology are an important component for the development of Christian theological education and spiritual understanding of Christian theology. This study is expected to contribute to the development of effective curriculum programs in theological education in the future. The research method used is qualitative with an interview system and questionnaires for training participants. This study shows that the influence of formal technology-based training plays an important role in improving professional skills in the field of Christian theology.  

Information Technology is a medium that can convey information. Family support is the treatment given to a family member. Casual sex among teenagers is a type of juvenile delinquency that is committed without a marriage relationship. The purpose of this research is to analyze the relationship between information systems and family support for free sex among teenagers at SMK 1 Bungoro. This type of research is analytical survey research, with a cross-sectional design. This research was conducted in March 20 - May 10 2020 Based on the research conducted, the results showed that there was a relationship between information technology and knowledge of free sex (0.05=0.05) and there was no relationship between family support and knowledge of free sex (0.06>0.05). Teenagers are expected to be active in seeking positive information from various existing media so that students have high knowledge and understanding about free sex in order to avoid the risks and impacts caused by free sex.