Publication Search

Conventional power plants that exist today can cause environmental damage, such as air pollution and the erosion of fossil reserves. Therefore, humans continue to innovate to develop environmentally friendly power plants. One of them is the combined wind turbine and solar cell technology to create a more effective solution called a Hybrid power plant. This research proposes a VAWT Helix Turbine Design for Microhybrid Power Plant. The design is according to the wind speed and solar radiation for the Madiun city area. BMKG data shows that the average wind speed is 3 m/s to 7 m/s. Meanwhile, the sun's heat is on average 25°C to 36°C. The wind turbine uses 3 blades of helix type and the solar cell used is Monocrystalline. The design was designed using the AutoCAD program and simulated using Qblade software. The blades are made using 3D Printing Polylactic Acid (PLA) and then printed using a 3D Printer. Simulation results using Qblade show the average value when the wind speed is 3 m/s produces an average power within 11.4 Watt. When the wind speed is 4 m/s, the average power is 33.7 Watt. When the wind speed of 5 m/s produces an average power of 80.2 watts.

Based on national policy, renewable energy is a source of energy that can be renewed, such as water, geothermal, sun, biomass, wind, changes in sea temperature, biogas, biofuel and sea waves. The sun is a type of renewable energy that is used to fulfill human needs. This condition is because the sun is basically eternal or never runs out, so its use is easier than other renewable energy. PLTS is a power plant that converts sunlight energy into electrical energy, often called a solar cell. This design is intended to study the hybrid PLTS design system to reduce dependence on electrical energy from PLN. A hybrid system is a system that uses two energy sources which will then back up each other. The results of this test in the solar panel test, the highest voltage was 17.51 ​​and the highest current produced by the solar panel was 4.12, and the battery charging test for 9 hours was 51.85Ah. Weather conditions and time differences cause the light intensity received by the panel to produce varying values, voltage, current and power due to uncertain weather conditions.