Publication Search

The achievement of the Sustainable Development Goals (SDGs) in Indonesia continues to face various challenges, particularly those related to poverty, social inequality, and increasing environmental degradation caused by climate change. These conditions highlight the need for an instrument capable of integrating social welfare objectives with environmental sustainability. This article aims to analyze the role of green zakat as an Islamic social finance instrument in supporting the achievement of the Sustainable Development Goals (SDGs). The study employs a descriptive qualitative approach using a library research method through the collection and analysis of various sources, including academic journals, books, official reports, and other relevant documents related to zakat, Islamic social finance, green economy, and sustainable development. The findings indicate that green zakat has significant potential to support the achievement of the SDGs through environmentally based economic empowerment programs, such as sustainable agriculture, reforestation, waste management, and the development of eco-friendly businesses for vulnerable communities. In addition to contributing to poverty alleviation, green zakat can support climate change mitigation efforts and environmental conservation in line with the principles of maqashid sharia. However, its implementation still faces several challenges, including limited public literacy, inadequate regulatory support, and suboptimal governance of environmental-based programs. Therefore, stronger collaboration among government institutions, zakat management organizations, and society is needed to develop a more effective green zakat model. Future studies are recommended to conduct empirical research to measure the impact of green zakat implementation on specific and measurable SDG indicators.

Lead (Pb²⁺) is a hazardous heavy metal commonly found in industrial wastewater and poses serious risks to human health and the environment due to its toxic and non-biodegradable nature. Therefore, an effective and environmentally friendly treatment method is required to reduce Pb²⁺ concentration in wastewater. This study aimed to evaluate the effect of pH and initial Pb²⁺ concentration on the adsorption capacity of ramie leaf (Boehmeria nivea) bioadsorbent activated with NaOH. The adsorption process was conducted using a batch system with pH variations of 4, 5, and 7 and initial Pb²⁺ concentrations of 20, 25, and 30 mg/L. The residual Pb²⁺ concentration was analyzed using Atomic Absorption Spectrophotometry (AAS), and the adsorption performance was evaluated based on removal efficiency and adsorption capacity (Qe). The results showed that pH and initial Pb²⁺ concentration significantly affected the adsorption performance. The optimum adsorption condition was obtained at pH 5, with a maximum removal efficiency of 99.20% and a total adsorption capacity of 18.56 mg/g. The increase in pH from 4 to 5 enhanced adsorption performance due to reduced competition between H⁺ and Pb²⁺ ions for active sites on the adsorbent surface. Increasing the initial Pb²⁺ concentration tended to increase adsorption capacity, although removal efficiency remained relatively stable due to the limited number of active adsorption sites. The Relative Standard Deviation (RSD) values ranged from 1.56% to 3.37%, indicating good precision and repeatability of the experimental data. These findings demonstrate that NaOH-activated ramie leaves have considerable potential as an effective, low-cost, and environmentally friendly bioadsorbent for Pb²⁺ removal from wastewater.

The primary challenge faced by the community in Dewasari Village, Ciamis Regency, is the ineffective management of household organic waste, along with limited knowledge and skills in converting organic waste into value-added products. This community service program aimed to strengthen community capacity in developing smart environmental management through community-based Black Soldier Fly (BSF) maggot cultivation. The program was implemented through educational sessions, practical training on BSF maggot cultivation, community mentoring, and learning evaluation using a participatory approach involving the village government, community groups, and local youth. The results showed significant improvements in participants' knowledge and practical skills in managing organic waste, cultivating BSF maggots independently, and utilizing the harvested maggots as alternative livestock feed and an additional source of household income. The program also increased community awareness of the importance of sustainable and environmentally friendly waste management. Therefore, community-based BSF maggot cultivation can serve as an innovative solution for promoting smart, productive, and sustainable environmental management while strengthening community economic empowerment and improving household livelihoods in Dewasari Village.

Lead (Pb²⁺) contamination in wastewater is a major environmental concern due to its toxicity, persistence, and ability to accumulate in living organisms. Adsorption using biomass-based materials has been developed as an alternative treatment method because it is efficient, economical, and environmentally friendly. This study aimed to analyze the effect of bioadsorbent dosage and contact time on Pb²⁺ removal efficiency and evaluate Pb²⁺ mass distribution using mass balance analysis in a batch adsorption system. Ramie leaf (Boehmeria nivea) was utilized as a bioadsorbent due to its lignocellulosic content, which provides active sites for metal ion adsorption. The research was conducted experimentally through bioadsorbent preparation, chemical activation, and batch adsorption using artificial Pb²⁺ solutions with variations in bioadsorbent dosage and contact time. Pb²⁺ concentrations before and after adsorption were analyzed using Atomic Absorption Spectroscopy (AAS). The obtained data were used to determine removal efficiency and Pb²⁺ distribution between the liquid phase and bioadsorbent. The results showed that ramie leaf bioadsorbent effectively reduced Pb²⁺ concentration, with the optimum condition obtained at 4 g/L bioadsorbent dosage and 90 minutes contact time, achieving 98.46% removal efficiency. Mass balance analysis indicated that Pb²⁺ ions were successfully transferred from the solution phase onto the bioadsorbent surface. These findings demonstrate that ramie leaf bioadsorbent has potential as a sustainable alternative material for heavy metal removal in wastewater treatment.

Plastic waste, particularly plastic bottles, has become one of the major challenges in urban environmental management due to its increasing volume and potential to pollute ecosystems. In Bogor City, plastic waste constitutes a significant proportion of daily municipal solid waste, highlighting the need for effective and sustainable waste management models. This study aims to analyze the role of the Reduce, Reuse, Recycle Waste Processing Facility (TPS3R) in managing plastic bottle waste in Bogor City, with a case study of the Eco Techno Park at Ibn Khaldun University (UIKA) Bogor. The research employed a descriptive qualitative method using a case study approach. Data were collected through field observations, in-depth interviews with facility managers, and reviews of relevant documents and literature. The findings indicate that the TPS3R Eco Techno Park has successfully implemented the 3R principles through an integrated system supported by environmentally friendly technologies and a circular economy framework. Plastic bottle waste is managed through sorting, shredding, and recycling processes to produce value-added products, including plastic pellets, handicrafts, and construction materials. In addition, organic waste management is integrated through the cultivation of Black Soldier Fly (BSF) larvae. The facility has contributed to reducing the volume of waste sent to landfills by approximately 18%. The study implies that strengthening regulatory support, enhancing community participation, and developing circular economy-based business models are essential to ensure the long-term sustainability of waste management programs and support Bogor City's waste reduction targets.

The increasing demand for electricity and high dependence on the utility power grid have driven the adoption of photovoltaic (PV) power generation as an environmentally friendly alternative energy source. This study aims to analyze the techno-economic feasibility of a load-sharing PV power generation system, focusing on technical analysis, operational costs, electricity bill savings, and environmental impacts. The research was conducted using quantitative methods to compare energy from photovoltaic generation and the grid, carbon emission calculations using an emission factor of 0,87 kgCO₂/kWh, and economic evaluation through parameters such as Net Present Value (NPV), Return on Investment (ROI), Cost of Energy (COE), and Payback Period (PP). The research results indicate that the photovoltaic panel generation system enables reducing utility grid energy consumption and reducing carbon emissions by 4,85 tons of CO₂ in 2024, increasing to 8,45 tons of CO₂ in 2025. The economic analysis indicates that the NPV value is not yet optimal; however, the ROI stands at 15%, the COE is Rp. 980.08/kWh, and the Payback Period is 6,56 years. The system is feasible for long-term investment. Overall, the implementation of the photovoltaic power plant demonstrates good potential in supporting carbon emission reduction, increasing the utilization of renewable energy, and reducing dependence on fossil-based energy.

This study aims to design a liquid dish soap made from lerak fruit (Sapindus rarak DC.) as an environmentally friendly alternative to synthetic chemical-based soaps. Lerak fruit was selected due to its high saponin content, which functions as a natural surfactant capable of producing foam and removing grease. This research integrates three courses: Product Design and Development using the Quality Function Deployment (QFD) method with House of Quality (HOQ) to identify consumer needs; Work Measurement Analysis using Operation Process Charts (OPC) to design the production process; and Cost Estimation Analysis using the full costing method to calculate production costs and determine the selling price. Results show that the best product concepts are Concept 4 and Concept 8, characterized by natural lerak surfactant, active ingredient concentration above 15%, pH of approximately 6, citrus/lemon scent, and pump bottle packaging. The production process consists of preparation, mixing, boiling, addition of thickener, cooling, pressing, filtering, and packaging, with a total production time of 142.05 minutes for two 500 ml products. Total production cost is Rp65,184, with a cost of goods sold (COGS) of Rp32,592 per unit and a selling price of Rp34,000 per unit.

The development of electric vehicle technology has encouraged the use of electric bicycles as an environmentally friendly and energy-efficient mode of transportation. One of the main components of an electric bicycle is the hub BLDC (Brushless Direct Current) motor, which is considered more efficient because it is directly integrated into the wheel without requiring a chain transmission system. However, the performance of the hub BLDC motor is affected by operating conditions, particularly variations in load and speed, which influence current consumption and overall electrical performance. This study aimed to analyze the effect of load and speed variations on the current consumption of a hub BLDC motor. A quantitative experimental method was employed by conducting direct tests on an electric bicycle using load variations of 50 kg, 60 kg, and 70 kg, as well as speed variations of 30 km/h, 35 km/h, and 40 km/h. Current measurements were carried out in real time using a PZEM 051 sensor, and the collected data were analyzed using average values obtained from repeated measurements. The results showed that increasing the load and speed led to higher current consumption of the hub BLDC motor, from 4.6 A to 5.0 A under load variation and from 4.5 A to 5.1 A under speed variation. These findings indicate that both load and speed significantly affect the electrical current required by the hub BLDC motor, demonstrating that greater operating demands result in higher energy consumption.

The development and performance of high-strength, environmentally friendly, and renewable nunang fiber (Cordia dichotoma)-reinforced polyester composites continue to be refined to achieve optimal performance. This study characterizes the key properties of nunang fiber-reinforced polyester composites with carbon powder fillers. The polyester composites were fabricated using a hot-press method with a nunang fiber volume fraction of 20% (by weight) and varying carbon powder content from 0–10% (by weight). The results of the investigation show that the tensile and bending strengths of the composites increase with increasing carbon powder content up to 2.5%. However, adding carbon powder filler up to 10% to the polyester–nunang fiber composites reduces their tensile and bending strengths. A different trend is observed for the impact toughness of the composites, which increases up to a carbon powder content of 5% and decreases when the carbon powder content reaches 10%. This phenomenon is attributed to the ability to form an optimal fiber-matrix interface between the nunang fibers and the polyester–carbon powder matrix. SEM morphological observations confirmed fiber pull-out failure and matrix failure due to the high stiffness caused by the presence of the carbon powder filler.

Increased vegetable production, especially cabbage (Brassica oleracea), in Indonesia requires effective and environmentally friendly pest management strategies. Plutella xylostella L. (Lepidoptera: Plutellidae) is a key pest capable of causing up to 90% yield loss. This study aimed to evaluate the effectiveness of botanical insecticides derived from Lantana camara leaf extract, Myristica fragrans seed extract, and Barringtonia asiatica seed extract in controlling P. xylostella larvae at a 15% concentration. The study was conducted using a Completely Randomized Design (CRD) with four treatments and three replications at a cabbage plantation in Tataaran Patar Village, South Tondano District, Minahasa Regency, from July to November 2025. Observations were carried out weekly for five weeks, recording larval mortality. Results showed that all three botanical extracts significantly affected larval mortality compared to the control. The highest mortality was recorded in the Barringtonia asiatica extract treatment at 87.07%, followed by Lantana camara at 78.09%, Myristica fragrans at 74.44%, and the control at 22.55%. These findings confirm that all three botanical insecticides at 15% concentration are effective in suppressing P. xylostella larval activity and can be developed as environmentally safe alternatives to synthetic pesticides.

The quality of rice that is suitable for consumption, one of which is determined by the absence of associated components when the rice is in storage. Rice storage is carried out by means of long shelf life and good rice quality. Damage to rice due to pest attacks causes a decrease in quality and quantity. Environmentally friendly efforts are needed to control the rice weevil Sitophilus oryzae using vegetable materials. This study sought to ascertain the death rate of rice weevils treated with lemongrass stem (Cymbopogon citratus), bay leaves (Syzygium polyanthum), and pandan leaves (Pandanus amaryllifolius). The study employed a fully randomized design with three treatments in the form of simplicia plant components. There were 21 study units because each treatment included seven repetitions. Each treatment used 20 rice weevil imago breeding results which were infested in a jar containing 200 g of rice for 4 weeks in the laboratory. The use of pandan leaf, bay leaf, and lemongrass simplicia at 7 days after treatment showed the proportion of rice weevil mortality was 59,29%, 39,29%, and 50,00%, respectively. As for the observations of 14 day after treatments, 21 day after treatments, and 28 day after treatments showed that the mortality rate of all rice beetles was above 50%. Regarding the percentage of rice powder, hollow rice, and rice weight loss, the findings of observations on rice weevil mortality did not reveal any significant variations across all treatments.

Gorontalo Province possesses significant mineral resource potential, particularly gold, silver, and copper, positioning the mining sector as a key driver of regional economic growth. However, a shortage of skilled local labor and the scarcity of vocational educational institutions in the mining field severely hamper human resource development in this sector. This study aims to design a Mining Polytechnic Campus in Gorontalo by applying sustainable architecture principles, encompassing energy efficiency, environmentally friendly materials, sound wastewater management, and user comfort. The research approach involves literature studies, field observations, interviews with relevant stakeholders, and quantitative data analysis regarding resource potential, the number of senior high school students, and educational space requirements. The design results emphasize site arrangement, building mass configuration, utility systems, and interior and exterior spaces that support academic, social, and community activities. The application of sustainable architecture principles is expected to create a campus that not only meets the needs of mining vocational education but also contributes to environmental conservation and sustainable regional development.

The use of synthetic dyes in the textile industry has caused various environmental problems due to waste that is difficult to degrade and has the potential to contaminate water and soil. Therefore, the development of environmentally friendly natural dyes is an important alternative to be explored. One potential but underutilized source of natural dye is kirinyuh weed (Chromolaena odorata L.), which is known to contain natural pigment compounds such as tannins and flavonoids. This study aims to analyze the dyeing quality of primissima cotton fabric using kirinyuh leaf extract with variations of alum and ferrous mordants through a mordanting process. The research employed an experimental method, including hot extraction of kirinyuh leaves, dyeing of primissima cotton fabric, and mordanting using alum and ferrous salts. The evaluation of dyeing quality focused on washing color fastness and light color fastness tests based on standard textile testing methods. The results indicate that the type of mordant significantly affects the resulting color quality. Alum mordant produced relatively lighter colors with good washing fastness, while ferrous mordant resulted in darker shades with similarly good washing fastness. However, color fastness to light showed relatively lower values, particularly in fabrics treated with alum mordant. Based on these findings, it can be concluded that kirinyuh leaf extract has the potential to be used as a natural dye for primissima cotton fabric, although further optimization is required to improve color resistance to light exposure.

The physiological changes that occur during pregnancy, both physically and mentally, may be rather uncomfortable, particularly in the second and third trimesters. Pregnant women often report back discomfort, muscular aches, trouble sleeping, excessive exhaustion, and irregular sleep patterns. Mothers' physical and mental health as well as the health of their unborn children may be significantly impacted by inadequate sleep quality during pregnancy. To enhance comfort and the quality of sleep during pregnancy, one non-pharmacological technique is to use an aromatherapy maternity pillow. An ergonomic and ecologically sustainable invention to enhance mother comfort during pregnancy was the goal of this research, which intended to produce a Pregnancy Pillow Therapy product with pineapple leaf fiber and aromatherapy. A descriptive research design using a prototype creation technique was used in this study. The stages of the research included problem identification, literature review, product design, material selection, prototype manufacturing, and product evaluation. Data were collected through literature studies and observations related to sleep discomfort in pregnancy, maternity pillow utilization, aromatherapy therapy, and pineapple leaf fiber characteristics. The developed product was designed ergonomically to support the back, abdomen, waist, and legs of pregnant women. The addition of aromatherapy was intended to provide a relaxing effect and improve sleep quality. The use of pineapple leaf fiber also supports environmentally friendly product innovation through agricultural waste utilization. The results indicate that Pregnancy Pillow Therapy has the potential to become a supportive product for improving comfort and sleep quality among pregnant women. Further studies are recommended to evaluate product effectiveness directly among pregnant women.

The urgency of this research lies in the increasing risk of flooding and air pollution in Makassar City due to rapid urbanisation and the uncontrolled growth of motorised vehicles. The purpose of this study is to analyse the potential of urban planning and sustainable mobility policies in reducing disaster risks and environmental impacts, and to formulate more adaptive and data-driven policy strategies. This study uses qualitative methods by collecting data through interviews, documentation, observation, and focus group discussions (FGDs). Key informants include the Environmental Agency, the Spatial Planning Agency, and the Makassar Regional Disaster Management Agency (BPBD), which have strategic roles in spatial planning policies, environmental management, and disaster mitigation. The study findings indicate that flood risk and air pollution in Makassar City are complex problems influenced by population growth, land conversion, vehicle density, limited drainage, climate change, and industrial waste. Although various urban planning policies have been implemented, their effectiveness remains limited due to implementation constraints. Therefore, an integrated approach that combines adaptive urban planning, environmentally friendly mobility, effective waste management, and community participation is needed. With a systemic and coordinated strategy, Makassar has the potential to reduce flood risk, reduce pollution, and create a safer, healthier, and more sustainable urban environment.

The increasing demand for electrical energy in military education facilities necessitates an efficient, reliable, and sustainable energy solution. This research aims to design a Solar Power Plant (PLTS) system to meet the street lighting needs in the Wangi-Wangi Complex of the Indonesian Naval Academy (AAL). The research method used is quantitative descriptive with an engineering design approach thru the stages of site survey, collection of solar energy potential data in the Surabaya area, calculation of electricity energy needs, calculation of solar panel capacity, calculation of battery capacity, and design of battery connection configuration. The research results show that the energy requirement for street lighting is 1,920 Wh/day, sourced from 8 units of 20 Watt LED lamps with an operating time of 12 hours per day. Based on the average solar radiation potential in Surabaya of 5 kWh/m²/day, the designed system requires 3 units of 200 Wp monocrystalline solar panels with a total area of approximately 4.89 m². For energy storage, 4 units of Yuasa N200 12 V 200 Ah batteries are used, configured in a series-parallel arrangement, capable of providing an effective energy of around 3,600 Wh with an estimated operating time of 22.5 hours. The research results indicate that the proposed solar power plant design is feasible to implement as an environmentally friendly, efficient alternative energy source that supports the green defense concept in the AAL environment.

Hydroponic cultivation of mustard greens (Brassica juncea L.) in greenhouses is an effective alternative for overcoming land limitations, particularly in urban areas. Hydroponic systems enable plants to obtain nutrients optimally through the application of the Nutrient Film Technique (NFT) and Deep Flow Technique (DFT), thereby promoting more efficient plant growth. In addition, the success of hydroponic mustard cultivation is influenced by environmental control, including temperatures ranging from 15–35°C and relative humidity levels of 70–90%. Plant nutrient requirements are supplied through an AB Mix nutrient solution with a pH range of 5.5–6.5 and an electrical conductivity (EC) value of 1.5–3.0 mS/cm. This review aims to analyze various factors affecting the growth of hydroponic mustard greens, including nutrient management, environmental conditions, and biological pest and disease control using beneficial agents such as Trichoderma and Bacillus. Furthermore, this study discusses several technical and economic challenges that may influence cultivation success. The findings indicate that hydroponic systems can significantly improve crop productivity and yield quality, reduce the use of chemical pesticides, and support the implementation of sustainable and environmentally friendly urban agriculture in Indonesia.

This study aims to analyze the environmental impact of waste generated by the gecko processing home industry based on environmental law regulations in Indonesia. In its processing activities such as lizards and snakes. These activities produce organic waste in the form of animal organs, blood, body fluids, and other waste in the materials that are later utilized as catfish feed. The research method used is qualitative with a normative juridical approach, statutory approach, and literature study. Data were obtained from laws and regulations , scientific journal, and environmental law literature. The results of the study indicate that the disposal of waste into rivers can increase Biological Oxyen Demand and Chemical Oxygen Demand (COD) levels, cause unpleassant odors, and reduce water quality and public health. The utilization of waste as catfish feed can reduce the amount of waste disposed of, however, it still requires hygienic processing to prevent biological risks. From the perspective of environmental law, the direc disposal of the waste into rivers is not in accordance with Law No. 32 of 2009 concerning Environmental Protection and Management and Government Regulation No. 22 of 2021 concerning the Implementation of Environmental Protection and Management. Therefore, better waste management is needed through proper waste treatment, increased awareness among business actors, and goverment supervision so that home industries can operate sustainably and in an environmentally friendly manner

Gorontalo Province has abundant freshwater resources, yet lacks integrated and sustainable aquaculture facilities. This article presents the conceptual design of a Freshwater Fish Aquaculture Center in Gorontalo Province as a response to this condition, applying Ecological Architecture as the primary design approach. The designed area accommodates various activities including freshwater fish cultivation, education, tourism, as well as research and development of fisheries technology. The method used is a qualitative descriptive approach through literature studies, field observations, interviews, and precedent studies. The design results show that the area can be divided into four main zones: the aquaculture zone, education zone, tourism zone, and supporting zone. The ecological approach is realized through the use of natural lighting and ventilation, environmentally friendly materials, an integrated water management system, and the maximization of green open spaces. This design is expected to increase fisheries productivity while promoting community empowerment through educational activities and environmentally sustainable tourism.

The Aceh Tamiang region was one of the areas affected by the hydrometeorological disaster. The disaster not only caused damage to community facilities and infrastructure but also left behind dead soil deposits that were poor in nutrients, dense in texture, and less productive for supporting agricultural and plantation activities. Research was conducted to examine strategies for utilizing dead soil after flooding by processing it with organic materials so that it could be converted into organic fertilizer with utility and economic value. This research aimed to find environmentally friendly land rehabilitation solutions, increase soil productivity, and open new business opportunities for disaster-affected communities. The results showed that the combination of flood sediment soil with organic materials significantly increased nutrient content, improved soil structure, increased water holding capacity, and accelerated the growth of test plants compared to untreated soil. Furthermore, this program provides dual benefits: on the one hand, it serves as a post-disaster land rehabilitation solution, and on the other hand, it serves as an opportunity for an organic fertilizer business that can reduce the community's dependence on relatively expensive chemical fertilizers. The implications of this research are not only limited to the technical aspects of agriculture but also touch on the socio-economic dimensions of the community. Utilizing dead soil as organic fertilizer can strengthen local economic resilience, increase farmer independence, and encourage the creation of environmentally friendly, sustainable agricultural systems. Therefore, this strategy can serve as an innovative model for addressing the impacts of hydrometeorological disasters in other areas facing similar challenges.