Publication Search

Desa Kemuning merupakan salah satu Desa yang terletak di Kec. Ngargoyoso, Kab. Karanganyar Jawa Tengah. Desa Kemuning mempunyai potensi dalam bidang pariwisata yang dikenal luas oleh masyarakat. Dalam proses pengembangan desa, salah satu permasalahan yang ada pada Desa Kemuning adalah kurangnya perhatian masyarakat tentang pentingnya Keselamatan dan Kesehatan Kerja (K3) dalam proses konstruksi. Sehingga Dosen Program Studi Teknik Sipil Universitas 17 Agustus 1945 Semarang melaksanakan kegiatan pengabdian yang berlokasi di Desa Kemuning yang berupa penyuluhan terkait pentingnya Keselamatan dan Kesehatan Kerja (K3) dalam proses pembangunan dan pengembangan Desa Kemuning. Metode kegiatan yang digunakan untuk tercapainya tujuan Pengabdian kepada Masyarakat ini adalah survei untuk mengetahui kondisi masyarakat dan lingkungan, analisis mengenai penyuluhan yang terkait pengetahuan masyarakat mengenai Keselamatan dan Kesehatan Kerja (K3), penyusunan materi tentang Keselamatan dan Kesehatan Kerja (K3), serta melakukan sosialisasi kepada masyarakat Desa Kemuning. Berdasarkan hasil dari proses kegiatan pengabdian kepada masyarakat yang dilaksanakan di Desa Kemuning yang berupa penyuluhan mengenai pentingnya Keselamatan dan Kesehatan Kerja (K3) untuk pelaksanaan konstruksi, dapat memberikan tambahan pengetahuan dan peningkatan sikap kehati-hatian dalam bekerja dibidang konstruksi dan warga semakin tahu item-item yang wajib digunakan dalam memenuhi standar Keselamatan dan Kesehatan Kerja (K3).

This study aims to analyze the implementation of occupational safety and health (OHS) and identify potential hazards and risks of work accidents in the production section of PT. Adhi Persada Beton Batching Plant Kebonarum using the Job Safety Analysis (JSA) method. The study was conducted with a descriptive analytical approach through direct observation. The results of the study showed that the highest risk of accidents occurred in the mobilization of the loader to the hopper, while moderate risks were found in the process of washing the mixer truck, loading concrete, transporting concrete to the casting location, and unloading concrete. The risk controls implemented, such as providing personal protective equipment (PPE), installing safety signs, and routine training, succeeded in reducing the risk level significantly.

This research examines God as the initiator of cross-cultural missions through a case study of mission transformation in the life of the Apostle Peter. Departing from the existing research gap, namely the need to reflect on the nature of God who loves other nations through a change in Peter's perspective, this study aims to show that God is the initiator of salvation for all mankind. The significance of this study is to encourage the church to see cross-cultural missions as an important approach in transmitting God's love to those who have not yet repented. Using a descriptive-analytical method, this study finds that Peter's encounter with Cornelius was a crucial turning point in early Christian missionary work. The experience radically changed Peter's narrow understanding of who was worthy of receiving the gospel, extending from just Jews to all nations. The descent of the Holy Spirit upon Cornelius and his family is clear evidence to Peter that God's grace is impartial and available to every believer. This event was not only a personal lesson for Peter, but also a revelation of God that opened the door for the gospel to reach the Gentile world, fundamentally changing the course of church history.   Penelitian ini mengkaji Allah sebagai penggagas misi lintas budaya melalui studi kasus transformasi misi dalam kehidupan Rasul Petrus. Berangkat dari kesenjangan penelitian yang ada, yaitu kebutuhan untuk merefleksikan sifat Allah yang mengasihi bangsa lain melalui perubahan cara pandang Petrus, studi ini bertujuan untuk menunjukkan bahwa Allah adalah inisiator keselamatan bagi seluruh umat manusia. Signifikansi penelitian ini adalah untuk mendorong gereja agar melihat misi lintas budaya sebagai pendekatan penting dalam menularkan kasih Allah kepada mereka yang belum bertobat. Dengan menggunakan metode deskriptif-analitis, penelitian ini menemukan bahwa perjumpaan Petrus dengan Kornelius merupakan titik balik krusial dalam karya misi Kekristenan awal. Pengalaman tersebut secara radikal mengubah pemahaman sempit Petrus mengenai siapa yang layak menerima Injil, meluas dari hanya orang Yahudi menjadi semua bangsa. Turunnya Roh Kudus kepada Kornelius dan keluarganya menjadi bukti nyata bagi Petrus bahwa kasih karunia Allah tidak memandang bulu dan tersedia bagi setiap orang yang percaya. Peristiwa ini tidak hanya menjadi pelajaran pribadi bagi Petrus, melainkan juga wahyu Allah yang membuka pintu bagi Injil untuk menjangkau dunia non-Yahudi, secara fundamental mengubah arah sejarah gereja.

Based on the background of the title I took, and I am an employee at one of the manufacturing companies in Batam. Therefore, I raised the title about translating Occupational Health and Safety documents in order to provide a breakthrough for employees to understand and comprehend, even though they do not fully understand foreign languages, especially English, so that there is no misunderstanding of communication that has fatal consequences for employees and the company where we work. Rojak and Handayani (2023) stated that language barriers in translating Occupational Health and Safety (OHS) technical documents can affect the effectiveness of safety communication in the workplace. This study aims to analyze the level of accuracy of translating Occupational Health and Safety (OHS) terms from English to Indonesian in the manufacturing industry based on a literature review of 15 recent journals, where the results of this study explain that incompatibility or dissimilarity in translation has the potential to cause miscommunication that is very dangerous to the safety of employees and employees in a company. The research that I did is not solely for employees and employees in the company where I work, but for all employees and employees wherever they work, especially in the manufacturing industry. The definition of manufacturing industry is a company or industrial body that processes raw materials into products or semi-finished materials and from semi-finished materials into products, which processing can be done mechanically or chemically.

Occupational Health and Safety (K3) is an effort to provide safety guarantees and improve the health status of workers/laborers by preventing work-related accidents and diseases, controlling  workplace hazards,  health  promotion, treatment and  rehabilitation. Occupational Health and Safety efforts include workforce, work methods/methods, work tools, work processes and work environment. In the PTM room at the West Baktiya Health Center, the space is quite narrow due to the large number of patients visiting, so there is untidiness in the room even though the AC and windows are used. However, having 2 tables in the room makes the room increasingly narrow and difficult to work comfortably. This research aims to find out an overview of the implementation of Occupational Safety and Health in the PTM room. This research is a qualitative descriptive research with a case study design. The subjects of this research were 3 officers in the PTM room. The object of this research is the implementation of K3 and PTM rooms at the West Baktiya Community Health Center. Data was collected by participant observation and semi-structured interviews with informants. The risk factors for the PTM room at the West Baktiya Health Center, seen from occupational safety and health factors, are that it is quite clean, no animals were found that cause disease transmission such as cockroaches, rats and others. There are no occupational safety and health signs and standard operational procedures related to occupational safety and health, while fire prevention in the PTM room at the West Baktiya Public Health Center and the West Baktiya Community Health Center itself is quite good with APAR. There needs to be signs regarding occupational safety and health and SOPs regarding occupational safety and health, especially in the PTM room.

This study analyzes the use of safety harnesses in ensuring workplace safety at PT. XYZ, focusing on their role in preventing accidents during high-altitude work. The research employs the Job Safety Analysis (JSA) method to identify potential hazards and evaluate risk control measures. Data from 2021 to 2024 reveal a significant correlation workplace accidents with injuries ranging from minor to severe. The findings underscore the importance of strict adherence to safety regulations, proper training, and routine equipment inspections. The study concludes that consistent use of safety harnesses, aligned with national and industry standards, can significantly reduce accident rates and enhance worker safety.

International airports are complex work environments with unique occupational health and safety risks. As hubs of intensive transportation activities, airports involve various operations, including flight services, passenger handling, cargo management, and fuel operations. Early detection of fuel leaks is crucial to ensure the aircraft’s fuel system is free from leaks, blockages, or potential fire hazards. This study aims to analyze the causes of fuel leakage and identify appropriate mitigation measures, using observation and literature review methods. The findings indicate that fuel leakage occurring while the aircraft is parked suggests damage to certain fuel system components, such as seal gaskets, sealants, and dome nuts, which may suffer from wear or cracking due to age-related degradation. Such damage poses serious risks, including fire hazards, corrosion to aircraft structures—particularly in hard-to-reach areas like the wings or fuselage—and a drop in fuel pressure that could impair engine performance or cause flight cancellations. To address these issues, thorough inspections of all fuel system components are essential. Additionally, the use of sensors to detect abnormal changes in fuel pressure and flow, combined with rigorous leak testing after repairs, is recommended to ensure operational safety and reliability.

Work accidents can be said to be a conflict in employment because they cause losses to workers and companies. Although the government has regulated the company's obligations in implementing occupational safety and health through various laws and regulations, in reality the effectiveness of the implementation of these regulations is still a problem, especially in terms of law enforcement in companies that have not fully implemented occupational safety standards according to applicable norms and provisions, one of which is at PT Sinar Semesta which is a metal casting company in Klaten Regency. This study aims to determine the regulations related to Occupational Safety and Health and the implementation of legal protection for Occupational Safety and Health at PT Sinar Semesta. This study uses an empirical legal research method. Based on the results of the study, it can be concluded that Occupational Safety and Health has actually been regulated in several laws and regulations. However, the implementation of legal protection for Occupational Safety and Health at PT Sinar Semesta has not been fully fulfilled because there are no health facilities specifically located in the company environment, the Occupational Safety and Health Management System has not been implemented, and the Occupational Safety and Health Development Committee has not been formed..

The port industry plays an important role in Indonesia's economic growth, but its operational activities pose a major risk to occupational safety and health (OHS). The aim is to analyze the management of occupational accident risk hazards at Tanjung Perak Port. And identify potential hazards in loading and unloading activities, use of heavy equipment, and worker safety. This study was conducted qualitatively, which showed that several risks were in the low category with 2 risks, medium with 25 risks, and high with 12 risks, so that these results require immediate control measures. The application of OHS management through the HIRARC method helps to systematically identify, assess, and control hazards. This study suggests increasing compliance with the use of personal protective equipment (PPE), optimizing work procedures, and regular safety training to significantly reduce occupational accidents.

This study aims to examine the influence of knowledge and awareness on safety riding behavior among online motorcycle taxi drivers. Considering the rapid growth of online transportation and the increasing risk of accidents, understanding the factors that affect driver behavior is crucial. This literature review analyzes 15 relevant studies. The researcher conducted a series of studies involving various sources such as books, Google Scholar, Mendeley, PubMed, ScienceDirect, focusing on open access and full paper articles in Indonesian or English. The analysis shows a significant relationship between drivers’ knowledge and awareness of safety riding practices and their compliance with safe driving behavior. Higher levels of knowledge and awareness correlate with increased adherence to traffic regulations, proper use of safety equipment, and better understanding of potential road hazards. These findings emphasize the importance of continuous safety training programs and policy interventions to improve the safety and welfare of online motorcycle drivers.    

The study aims to analyze the occupational safety and environmental health risks due to aircraft painting at the Hangar of PT. XYZ. The study is a descriptive study with a qualitative approach. The results of the study are the analysis of occupational safety risks seen from occupational safety risks and risk control. Occupational safety risks in aircraft painting activities at PT. XYZ are divided into several parts, namely (1) Exposure to hazardous chemicals is included in the high category; (2) The risk of work accidents is included in the moderate category; (3) Equipment damage is included in the low category; and (4) Fire is included in the low category. Risk control can be carried out by (1) Increasing strict supervision of the aircraft painting process; (2) Conducting appropriate occupational safety training for workers; (3) Using PPE; (4) Using adequate safety equipment; and (5) Carrying out proper equipment maintenance. The analysis of environmental health risks is seen from environmental health risks, sources of risk and risk control. Environmental health risks are divided into several parts, namely (1) Air pollution is included in the moderate category; (2) Soil and water contamination is included in the moderate category; and (3) Environmental damage is included in the moderate category. Sources of environmental health risks are the use of hazardous chemicals and painting waste. Risk control can be done by carrying out strict supervision, using safe chemicals and proper waste management.

Occupational safety and health training explains that increased knowledge and awareness of workers about potential workplace hazards can motivate them to comply with safety standards, including the use of personal protective equipment (PPE). This research aims to analyze the effect of occupational safety and health training on the behavior of using PPE by workers in the construction industry. This research is driven by the high number of work accidents that happen in the construction industry sector in Indonesia, where many workers are still reluctant to use PPE. The method used is a comprehensive literature review, with analysis of various relevant sources including academic journals and research reports as well as 3 electronic databases, namely Google Scholar, PubMed, and GARUDA. The findings of the study showed that workers who participated in occupational safety and health training showed increased knowledge and awareness of potential hazards in the workplace. Despite this, compliance rates are still low, especially among younger and less experienced workers. There is still no clear research data on reducing the accident rate in workers after this occupational safety and health training. This research confirms the need for strict supervision in the field to create a safer and healthier work environment. 

This study aims to identify and analyze the influence of knowledge and awareness on motorcycle riders' safety behavior (safety riding), particularly among online motorcycle taxi drivers. In the context of increasing traffic accidents, understanding the factors influencing riders' compliance with safety regulations is crucial. This research employs a qualitative descriptive method and was conducted from January to April 2025. A total of 15 relevant articles published between 2020 and 2025 were systematically reviewed from credible databases such as Google Scholar, CORE, and ScienceDirect. The analysis reveals that compliance with road safety regulations is influenced by both internal and external factors. Internal factors include the rider’s knowledge level, safety attitudes, age, and riding experience. External factors consist of law enforcement supervision, access to safety training, availability of protective gear, and social support from family and peers. Among these, knowledge and attitude are identified as the most influential aspects affecting safety compliance. Therefore, a comprehensive approach is needed, including continuous education, regular training, and collective awareness-raising to foster a safe riding culture. This study contributes to a better understanding of behavioral aspects related to road safety and serves as a foundation for the development of behavior-based transportation safety strategies

The high number of accidents due to alcoholic drinks in 2020 caused 201 people to die, 184 people were seriously injured, and 417 other people suffered minor injuries, making the provinces of Papua and North Sulawesi the provinces with the highest number of accidents due to the influence of alcoholic drinks. The aim of developing this community is to provide education to motorists in Jayapura City, for the area around Waena, Jayapura City. Increasing drivers' awareness of the dangers of driving under the influence of alcoholic beverages and improving traffic safety attitudes in the youth community in boarding houses around Heram Abepura sub-district. By using video lecture and game methods. This service activity was carried out in three student dormitories, namely the Yahukimo Dormitory, the Papua Regional Government Mess and the BEOPRITS Asmat Dormitory. The results of this service are intended for the participants

Cargo safety on container ships is a crucial aspect of maritime operations, especially during voyages across open waters such as the Indian Ocean, which is characterized by extreme weather conditions and high waves. A common problem encountered is cargo damage or shifting due to non-compliance with proper stowage and securing procedures. This study aims to analyze the factors influencing cargo safety during container ship voyages in the Indian Ocean. The research employs a qualitative descriptive method using a case study approach. Data collection was conducted through historical document analysis related to cargo damage incidents and direct observation of the loading, stowage, and securing processes on board. The findings indicate that severe weather conditions, suboptimal cargo stowage techniques, and low compliance with safety procedures are the main factors contributing to cargo instability. Based on these findings, the study recommends enhanced training for crew members, the use of real-time cargo monitoring technologies, and stricter enforcement of regulations concerning container securing and stowage. These measures are expected to minimize the risk of incidents and improve overall cargo safety during maritime transport.

Kegiatan perawatan pelampung suar di wilayah kerja Distrik Navigasi Tipe A Kelas I Tanjung Perak memiliki tingkat risiko kecelakaan kerja yang tinggi, mengingat aktivitas ini melibatkan pekerjaan fisik berat serta kondisi lapangan yang dinamis. Penelitian ini bertujuan untuk menganalisis risiko kecelakaan kerja menggunakan metode Job Safety Analysis (JSA), yang berfungsi untuk mengidentifikasi potensi bahaya serta menetapkan langkah pengendalian yang sesuai. Penelitian ini menggunakan pendekatan kuantitatif dengan metode deskriptif observasional. Teknik pengumpulan data dilakukan melalui observasi lapangan dan penyebaran kuesioner kepada 40 responden, yang dipilih berdasarkan teori Arikunto. Hasil penelitian menunjukkan bahwa terdapat 13 jenis potensi kecelakaan kerja selama proses perawatan pelampung suar berlangsung. Dari jumlah tersebut, 9 termasuk dalam kategori risiko tidak diinginkan dan 4 lainnya dalam kategori dapat diterima dengan kontrol. Pengendalian risiko dilakukan melalui penerapan rekayasa teknik, pendekatan administratif, penggunaan alat pelindung diri (APD), serta eliminasi bahaya langsung dari sumbernya. Hasil ini menunjukkan bahwa analisis risiko merupakan bagian penting dalam sistem manajemen keselamatan kerja di bidang navigasi laut.

Shipping safety is everything that can be developed related to accident prevention measures when carrying out work in the shipping sector. Shipping safety and security is a state of fulfillment of transportation safety and security requirements in waters, ports and maritime environments. Fire extinguishing equipment is vital in ensuring operational safety on board and meeting the requirements set by SOLAS. Regular and regular maintenance is required to ensure that fire extinguishing equipment is always in a ready-to-use condition in the event of an emergency. Conducting  periodic drills aims to find out the extent of the readiness of fire extinguishing equipment to be used and its completeness. This study has the purpose of finding out: 1) Factors causing fire extinguishing equipment in KM. Lambelu is less than optimal 2) The impact that will occur if routine maintenance is not carried out on the fire extinguisher. The method used by the researcher this time is a qualitative descriptive method. The results of this study are as follows, The main causes of damage to light fire extinguishers in KM. Lambelu is the lack of inspection and supervision that is carried out periodically on the equipment, while other supporting factors are the lack of understanding and skills of the crew in operating light fire extinguishers, the use of light fire extinguishers that are not in accordance with the SOPs, and exposure to the marine environment that causes light fire extinguishers to corrode or rust. The impact of not carrying out routine maintenance is a decrease in preparedness in times of emergency, in addition to that it will cause financial losses, operational disruptions, and reduce public trust in the company.

Occupational safety and health (K3) is an important factor in ensuring the physical and mental health of workers and creating a safe work environment. This research discusses the implementation of K3 management to minimize work hazards, especially those caused by developments in industrial technology and the use of hazardous materials such as asbestos. As a destructive material, asbestos can cause serious diseases such as lung and pleural cancer if not managed properly. Referring to the K3 management system policy in the Minister of Manpower Decree No. 05 1996, this research emphasizes the important role of company management in integrating K3 into the operating system. It is hoped that the results of this research can serve as a guide for the business world to identify hazards, assess risks, and implement control measures to create a safe and secure work environment.

Management and characteristics of B3 waste at PT Ketenagalistrikan based on the potential hazards produced have been carried out by grouping and storing B3 waste based on physical, chemical and based on potential hazards with the aim of security and safety in the Temporary Storage Warehouse for B3 Waste. PT. Ketenagalistrikan has implemented a comprehensive Hazardous and Toxic Materials (B3) waste management system based on Government Regulation No. 22 of 2021 and Regulation of the Minister of Environment and Forestry No. 6 of 2021. Power plant operational activities produce various types of B3 waste such as used oil, used batteries, and other contaminated materials. B3 waste management is carried out through the stages of identification, sorting, containerization, labeling, temporary storage at licensed B3 TPS, as well as transportation and processing by licensed third parties. A quarterly recording and reporting system to environmental agencies is also carried out routinely. This program has succeeded in reducing the risk of environmental pollution and increasing the company's compliance with applicable B3 waste management regulations. Occupational Safety and Health (K3) at PT. Electricity, especially in the handling and storage of Hazardous and Toxic Materials (B3) waste, also plays an important role in avoiding unwanted things. B3 waste generated from PT. Ketenagalistrikan office operations such as used lubricants, batteries, used TL lamps, printer cartridges, and other electronic equipment require special handling in accordance with Government Regulation No. 22 of 2021. Compliance with K3 standards in the storage of B3 waste is an effort to minimize the risk of environmental pollution and potential health problems for workers. The implementation of K3 in the storage of B3 waste in PT. Ketenagalistrikan offices not only fulfills regulatory obligations but also supports the company's commitment to environmental sustainability in accordance with ISO 14001:2015, as well as ensuring the safety and health of its workers.

Listrik menjadi penunjang dalam kemajuan teknologi dan pelaksanaan pembangunan yang mendorong kegiatan ekonomi untuk kesejahteraan masyarakat. untuk mendukung program tersebut maka perlu dukungan instalasi listrik yang memadai untuk menjamin keselamatan dan mencegah kerugian pada konsumen. Kerugian ini dapat terjadi akibat instalasi yang tidak sesuai dengan standar PUIL. Seperti halnya dengan rumah ibdah yang terdapat pada kampung kalamanuk distrik fakfak timur kabupaten fakfak. Setelah dilakukan observasi, masih terdapat instalasi penerangan yang tidak sesuai dengan standar. keadaan ini membuat masyrakat menjadi tidak khusyuk dalam melakukan ibadah karena khawatir akan bahaya krosleting listrik yang dapat membahayakan keselamatan jemaat. Hal ini mendorong mahasiswa Jurusan Teknik Listrik Politeknik Negeri Fakfak melakukan reinstalasi penerangan pada rumah ibadah di Kampung Kalamanuk. Pelayanan yang diberikan berupa instalasi ulang listrik penerangan serta perbaikan instalasi dan mengganti perlatan yang tidak sesuai dengan standar. Proses instalasi dilakukan dengan mengganti pengkabelan untuk jalur penerangan. Pemasangan ulang kabel dilakukan pada plafon rumah ibadah kemudian diklem pada setiap jarak 30 cm. Setelah proses pengkabelan selesai maka selanjutnya adalah melakukan instalasi penerangan baik dalam ruangan rumah ibadah maupun yang terdapat pada teras depan dan belakang rumah ibadah. Sebanyak 2 buah lampu penerangan pada bagian teras depan, 2 buah lampu penerangan bagian teras belakang dan 6 buah lampu penerangan pada bagian sisi samping kiri dan kanan rumah ibadah. Pemasangan penerangan pada bagian teras dimaksudkan agar halaman rumah ibadah menjadi terang ketika malam hari.