Publication Search

Background: A survey in Indonesia reported that 38% of mothers stopped giving breast milk due to a lack of milk production.Oxytocin massage is one of the solutions to overcome the irregularity of milk production. Oxytocin massage is massage along the spine (vertebrae) to the fifth-sixth costae and is an attempt to stimulate the hormones prolactin and oxytocin after childbirth. Oxytocin massage is done to stimulate the oxytocin reflex (milk ejection) or the let down reflex (flow reflex). Purpose: the purpose of this study was to determine the effect of oxytocin massage by husbands on increasing milk production in postpartum mothers in Ngrukuh Village, Klaten Regency. Methods: This research was conducted in June 2023. This type of research uses a case study research design. Samples were 2 (two) postpartum mothers. Measuring the adequacy of breast milk in the oxytocin massage procedure with the length of time the intervention was carried out for ± 15 minutes and the frequency of giving therapy 1-2x a day for 14 days. Data analysis was carried out by looking at the breastfeeding adequacy observation sheet. Results: The results of the study showed that the level of milk production before the oxytocin massage was carried out, namely that milk production did not include signs of sufficient milk supply and after being given oxytocin massage, the level of milk production included signs of sufficient milk supply. Conclusion: There is a significant influence between the level of milk production experienced by postpartum mothers before and after being given oxytocin massage.

Background: The birthing process can affect breast milk production because it tends to cause lactogenesis to be slower. This is one of the factors why breast milk is not smooth at the beginning of the birth period. One treatment that can be done to facilitate breast milk production is by consuming Black Seed. Because black seed contains lagtogonum which functions to facilitate breast milk production. Objective: To determine the effect of giving black seed on the smooth production of breast milk in breastfeeding mothers at PMB Bidan Ning, Tawangmangu District. This research method uses a quasi-experimental method with a post test control group design. The research sample used accidental sampling, totaling 30 breastfeeding mothers on days 3-14 after giving birth who were divided into 2 groups, namely 15 control groups and 15 experimental groups. Results: The results of bivariate analysis using the Mann-Whitney test showed that the results for the black seed experimental group and the control group were p=0.000. Conclusion: There is a significant difference in the smoothness of breast milk between those given black seed and those not given black seed in PMB Bidan Ning, Tawangmangu District.

Researched analyzes the effect of product, price, and location has a positive and significant effect on purchasing decisions using non-probability sampling techniques, purposive sample methods, research designs namely verification and descriptive methods. The analysis used is multiple linear regression analysis. As for the research results product, price, and location simultaneously and partially have a positive & significant effect on purchasing decisions.  

The manufacturer's job is to distribute goods efficiently to meet consumer demand. If goods are delivered on time and are of acceptable quality and quantity, customers will be happy. As a result, a company's productivity levels can be greatly increased with a competent production system. This raises the issue that companies must be able to manage production schedules and prioritize client requests to avoid delivery delays, build excessive amounts of raw material inventory, and increase overall company profitability.

Ineffective breastfeeding if not immediately handled can cause problems such as swollen breasts, nipple blisters, and mastitis in mothers. To prevent this, midwives play a role in overcoming the problem of breast milk that is not smooth, one of which is by providing complementary care in the form of the marmet technique. This study aims to determine the effect of marmet technique on the smoothness of breast milk production. This research is a qualitative research with case studies with data sources and data types using primary data obtained from interviews, examinations, and observations and secondary data obtained from relevant sources.  The implementation technique was carried out on Mrs. T by providing the marmet technique with a duration of approximately 20 minutes a day and conducting an evaluation after administration with the results known to have an effect on the smoothness of breast milk production.    

With increasingly advanced technological developments, some of these problems can be minimized with the latest technology in the construction sector known as Building Information Modeling (BIM). With BIM, all parties involved in the project (stakeholders) can collaborate from the planning stage before the project is carried out, thereby reducing the potential for errors in development implementation (Mafrul, 2022). The use of BIM can provide the various functions necessary to model the entire life cycle of a building, while also providing a basis for dealing with changes and construction progress in positions and correlations between project teams. Proper implementation of BIM enables increasingly integrated design and construction processes, creating buildings with better quality, more efficient production costs, and shorter project completion times (Khairi et al., 2022b).

Good lighting in a room is an important role that must be fulfilled to create a comfortable, functional and productive atmosphere. Inadequate lighting, such as lighting that is too dim or too bright, can cause eye fatigue, decreased productivity, and even health problems. In designing a room, lighting is also an important aspect that must be considered. Factors such as the type of activities performed in the room, the size of the room, and individual preferences can influence the selection of lamp types, light source placement, and optimal lighting settings.

The development of a potential sector cannot be separated from the relationship between stakeholders and economic actors in the region. Because, in essence, the development of potential sectors is carried out by village communities who work together with policy makers at both the village and district levels to provide guidance, direction, coaching and supervision to the community so that they can help in efforts to raise the community's standard of living (Fatmawati et al., 2020).  

The development of the business world is currently experiencing quite high development, not only in the manufacturing industry but many are entering the world of service markets, by presenting similar or even the same service products, thus making service businesses compete to provide service quality and satisfaction in order to gain customer loyalty. . This study aims to analyze the effect of service quality on customer loyalty through customer satisfaction as a mediating variable. Samples were taken using a non-probability sampling technique with a purposive sampling technique with the criteria of consumers who had ordered more than 3 times which resulted in a sample of 90 people, the method of data collection was through distributing google form questionnaires with a Likert scale of 1-5 as a measuring tool. Data analysis techniques in this study used simple linear analysis and partial regression test (t test). Data processing was carried out using the SPSS 25 program. The results of this study indicated that service quality had a significant effect on customer loyalty, service quality had a significant effect on customer satisfaction, customer satisfaction had a significant effect on customer loyalty, and customer satisfaction was proven to mediate the effect of service quality on consumer loyalty.

The purpose of this study was to find out and analyze the calculation of the use of raw materials in Asep Embordir, the advantages of Asep Embordir before using the Linear Program and the advantages of Asep Embordir after using the Linear Program to increase maximum profit. The method used in this research is a survey method. With a descriptive analysis approach. The data used are data from interviews and direct observations during April 2022 regarding raw materials for making apparel, labor wage costs, and profits and production time. The existing problems are then formulated using the linear programming method and solved using the simplex method. The results showed that the use of raw materials in Rmfcollectionembroidery for cloth was 45 wood, buttons (27.8) packs, thread 9 rolls) and collar hardener (162 meters). The optimal production quantity for all production variations according to the company's production capacity is 540 pcs, while for KDLP the optimal production is 60 pcs. RMFCollectionembroidery profit from the selling price of Rp. 35,000/pcs, the total profit from KDLP is Rp. 2,100,000, this can be representative of the profit from the production of other clothing sizes. Based on the results of research studies, it is suggested that for the future, if asep border will increase the amount of production, companies need to take into account development costs and need to further analyze the use of all existing production capacity so that production can be carried out optimally.

The purpose of this study was to determine simultaneously and partially the effect of reward and punishment on the work discipline of employees in the sewing production division of CV.Wijaya Family Tasikmalaya. The samples in this study were employees of CV. Wijaya Family Tasikmalaya, totaling 53 people. This research was conducted by collecting data with a questionnaire data collection technique, then testing the data with multiple linear regression analysis. The results of the study show that partially giving rewards has a significant effect on employee work discipline in the sewing production section of CV. Wijaya Family Tasikmalaya. Partially has a significant effect on punishment on employee work discipline in the sewing production section of CV. Wijaya Family TASIKMALAYA. Simultaneously, it has a significant effect on reward and punishment on employee work discipline in the sewing production section of CV. Wijaya Family Tasikmalaya.

The purpose of this research is to (1) determine the percentage of loading and unloading productivity at the Port of Cappa Ujung Parepare (2) to find out the criteria that have good performance in loading and unloading services at the Port of Cappa Ujung Parepare (3) to find out the criteria that are considered according to the interests of users Loading and unloading services at Cappa Ujung Parepare Port. The population in this study was 120 people, which is the number of respondents in this study related to loading and unloading service assessment performance and the interests of loading and unloading service users. The data collection techniques used were interviews and questionnaires. The data analysis technique in this research was carried out using the Customer Satisfaction Index (CSI) Method and the IPA Analysis Method. The results of this study indicate that (1) The productivity of loading and unloading at the Cappa Ujung Parepare Port in 2021 will reach 5,137,823 Tons/M3 with the biggest achievement in December reaching 1,873% greater than the monthly target. The productivity of loading and unloading at Cappa Ujung Parepare Port in 2022 reached 6,944,242 tons/M3 with the biggest achievement in December reaching 2,510% greater than the monthly target (2) CSI calculation results of 77.64%. Thus, the level of customer satisfaction with loading and unloading services is in the satisfactory category. The highest WF value is shown at 10.42% on attribute 8 (safety in the port environment) which means that this attribute is considered the most important by customers in unloading services. The lowest WF value is shown at 9.69% on attribute 7 (clarity of information about loading and unloading) which means that this attribute is considered not too important by customers in loading and unloading services.

Increasing business value for MSMEs is no less important. This community service is carried out with the aim of increasing the business value of M-Prod SMEs which is engaged in convection services. The SMART Goal Setting concept is implemented to make M-Prod have added value and can improve its business performance in the future. This community service program takes the form of a tiered workshop with assistance to the MSMEs concerned so that they focus on profit, not just turnover. This community service is one of the efforts to increase the competitiveness of M-Prod SMEs in order to gain a competitive advantage. The problem faced by business actors is that the specific goals of a business are not measurable. Finally partners do not understand how goals are set and how to analyze a measurable goal. This is very influential in terms of business development, this will have an impact on profits.

This research has several objectives, including understanding the role of Posyandu Anggrek cadres in community health empowerment and the supporting and inhibiting factors of the Posyandu Anggrek cadres' role in community health empowerment in Olehsari Village, Glagah District, Banyuwangi Regency. The research method applied in this study is qualitative research. Several data collection techniques were used, including observation, interviews, and documentation. In this study, the researcher serves as the instrument. The data analysis technique used in this research is the interactive technique with steps including data collection, data display, reduction, and conclusion drawing. Meanwhile, data validity testing in this study used data triangulation and member checks. The results of this research indicate that the role of Posyandu Anggrek Cadres in community health empowerment in Olehsari Village is very important and influential. With strong support from the government, the community, and relevant institutions, as well as the enthusiasm and commitment of Posyandu Anggrek cadres, efforts to empower health in the village can successfully create a healthier, more productive, and higher quality environment for the community, especially for children experiencing stunting. Meanwhile, inhibiting factors include limited accessibility, lack of community understanding, limited resources, political and social instability, and insufficient involvement of the government and relevant institutions in carrying out the cadres' duties.  

Health is one of the things that is very valuable in life so that community participation is needed to be able to improve the degree of health, as well as mental health which is still a significant problem in the world, including in Indonesia. Mental health is a condition in which an individual can develop physically, mentally, spiritually and socially so that the individual is aware of his own abilities, can handle pressure, can work productively and is able to contribute to his community (Retno, 2020).

According to Maramis (2008), health is one of the most valuable things in life, as is mental health, which is still a significant problem in the world, including in Indonesia. Mental health is a condition where an individual can develop physically, mentally, spiritually and socially so that the individual is aware of his own abilities, can overcome pressure, can work productively and is able to contribute to his community (Febrianto et al., 2019). Mental health is a dynamic condition ranging from mental health to mental disorders. The types of mental disorders that can be found in society are mild mental disorders, for example emotional mental disorders and severe mental disorders, one of which is schizophrenia (Ramadhani et al., 2021).

Saat ini, dengan munculnya e-commerce di Indonesia, orang hanya tinggal di rumah, membeli barang secara online dan mengirimkannya langsung ke rumah. Semua dapat dilakukan dengan beberapa klik atau ketukan. Dengan mempertimbangkan kemudahan ini, minat belanja online semakin meningkat. E-commerce di Indonesia tumbuh signifikan sejak beberapa tahun terakhir. Dalam survei terbaru yang dilakukan oleh Barometer Konsumen Google bersama toko online Elevenia, Jumlah transaksi online di Indonesia meningkat, 78% responden berbelanja online melalui gadget seluler. di Indonesia mencatat 41% penjualannya berasal dari Jakarta, namun enam bulan kemudian angka ini turun menjadi 22%. Hal ini menunjukkan bahwa tidak hanya konsumen di Jakarta yang rutin berbelanja online, konsumen di luar Jakarta juga memberikan kontribusinya terhadap pasar e-commerce di Indonesia, termasuk masyarakat di kota Semarang. Dengan semakin merabahnya perkembangan industri e-commerce Transmart berinovasi dengan meluncurkan Transmart Home Dilevery (THD) diharap mampu membantu memenuhi kebutuhan harian masyarakat terutama produk fresh food namun tetap meminimalisir penyebaran virus corona (Covid-19). Dengan semakin maraknya perkembangan perbelanjaan online Transmart hadir dengan memberikan pelayanan yang aman, praktis dan juga nyaman bagi pelanggan. Riset yang dilakukan oleh Association of E-commerce Indonesia (IDEA), Google Indonesia, dan TNS (Taylor Nelson Sofres) menemukan bahwa produk fesyen mendominasi pasar e-commerce sebagai produk yang paling sering dibeli, diikuti oleh gadget seluler, elektronik konsumen, buku dan majalah, dan bahan makanan. Dengan berkembangnya e-commerce, persaingan antar toko online menjadi semakin ketat. Banyak perusahaan perlu menyesuaikan diri dengan kebutuhan pasar yang berubah-ubah. Untuk mendapatkan keunggulan kompetitif, perusahaan harus memahami pentingnya kepuasan pelanggan. Pelanggan yang puas akan membeli produk lagi, membicarakan produk dengan baik kepada orang lain. Terutama di pasar e-commerce jika orang menemukan produk serupa dengan harga lebih rendah dan kualitas lebih tinggi, mereka dapat dengan mudah pindah dan membeli dari pesaing yang lebih gesit. Masalah belanja online lainnya adalah layanan pengiriman yang buruk yang mengakibatkan kedatangan produk terlalu lama atau bahkan rusak. Layanan pengiriman sangat penting dalam e-commerce, karena merupakan tahap terakhir dari proses pemenuhan pesanan dan dari sudut pandang konsumen, yang paling kritis. Pengiriman tepat waktu dan andal harus menjadi prioritas nomor satu dan sangat penting untuk keberhasilan setiap toko online. Penelitian ini mengambil obyek di Transmart Setiabudi Kota Semarang, karena masa pandemi COVID-19 ini meluncurkan layanan pesan antar Transmart Home Dailivery (THD) yang dapat diakses melalui website thd.transretail.co.id ataupun dengan cara scan QR code yang terdapat pada seluruh sosial media Transmart Carrefour. Peluncuran layanan pesan antar ini diharap mampu membantu memenuhi kebutuhan harian masyarakat terutama produk fresh food, namun tetap meminimalisir penyebaran virus corona (Covid-19). Permasalahan yang diangkat penelitian ini adalah bagaimanakah dampak online fresh product delivery service dan pakaging produk dalam upaya meningkatkan kepuasan dan loyalitas pelanggan. Penelitian ini sesuai renstra Universitas 17 Agustus 1945 dalam topik tata kelola bisnis perusahaan.

Cinangka Village is a village in the Cinangka District that has the greatest economic potential in the plantation sector, especially coconut production. The potential yield of coconut plants in Cinangka Village contributes to coconut production so that in 2021 Cinangka District can produce 1113.75 tonnes of coconut crops. The results of this coconut production are distributed to meet consumption needs in the tourism sector. The high consumption of coconut fruit has an impact on the high amount of coconut husk waste produced. The method for implementing these KKM-PkM activities uses participatory counseling methods, where this counseling is carried out by providing verbal and visual counseling. The results of KKM-PkM activities have had a positive impact, namely increasing public knowledge and awareness about the benefits of utilizing coconut husk waste into coconut husk powder (cocopeat) which is used as a planting medium using hydroponic techniques. Apart from that, if the utilization of coconut husk waste management is carried out on a massive scale supported by the use of coconut husk grinding machines, it can directly increase the income of the people of Cinangka Village.

This paper will discuss the aesthetic of patterns used in Tenun Pahang (TP). This study also aims to describe the patterns found in TP, both basic and contemporary modern patterns. This handicraft product originates from Keladi Island, Pahang. TP is said to be originated from Sulawesi which was brought to Malaya almost 200 years ago. Based on observations, there are various designs used by weavers as the background of this product. In the field study conducted, 2 (two) informants were interviewed and they are from the Royal Pahang Institute of Weaving Skills, Pahang State Crafts and the eleventh (11) generation of Karaeng Aji descendants who are said to have brought this weaving skill to Keladi Island. The results of the analysis found that the pattern used as a background on this TP product was inspired by the high creativity of the weavers as well as the beauty of the production of the TP pattern which is close to the culture of life of the Pahang people themselves. This study is important for the overall understanding as well as a clearer translation of the patterns found in TP.  

: This study aims to examine the effect of work discipline and compensation both simultaneously and partially on the work productivity of Production Section employees at SSC Quality Tasikmalaya. The population in this study is 45 respondents who are employees of the Production Department at SSC Quality Tasikmalaya. The data collection methods used are interviews and questionnaires. Data analysis techniques in this study using multiple linear regression analysis, correlation coefficient and coefficient of determination using SPSS software version 25. The results of this study indicate that work discipline and compensation simultaneously affect work productivity. Work discipline partially has a positive and significant effect on work productivity. Compensation partially has a positive but insignificant effect on work productivity.