Publication Search

The construction of health facilities is part of national development. Therefore, many health facility development projects, such as hospitals, continue to be carried out in various regions. One of them is the construction of the New Siloam Hospital in Surabaya. This article aims to understand the concept of detail engineering design on the building structure of New Siloam Hospital. Field surveys and data collection are the methods used to obtain information related to hospital construction projects. There are several differences between field data and work drawing data that has been created. Some of these differences include details on the reinforcement and casting volume. Therefore, it is necessary to carry out further evaluation of field data with work drawing data so that the project can proceed according to initial planning.

The construction implementation method is a very important part of the construction project to obtain the objectives of the project, the cost, quality and time. The technology aspect is very important in a construction project. Using the method of proper, practical, fast, and safe is very helpful in a construction project. Preloading and Prefabricated Vertical Drain (PVD) methods are intended to accelerate settlement and increase the bearing capacity of soft native soils by reducing pore water through PVD in the soil with the intention of reducing water content or air content in soil grains so as to accelerate long-term settlement. Preloading with PVD can reduce the material used for pre-loading, reduce embankment material, accelerate consolidation time, and increase embankment stability.

Quality control review of concrete at PT. Merak Jaya Beton is important to ensure that the work carried out meets quality standards and is implemented according to existing procedures. PT. Merak Jaya Beton is one of the companies in Indonesia that produces precast concrete. At PT. Merak Jaya Beton, quality is highly regarded from trials before being taken to projects (trial mix and F’c)to construction projects (Slump tests), checking the proportions of mixtures and uniformity of basic materials at the batching plant, to hammer test checks. The process of selecting the right concrete materials can determine the amount or quantity of dependency on materials considering the quality requirements of the concrete used. Several specifications of ready-mix concrete are produced to meet the specifications demands from clients. Meanwhile, for material quantity planning based on the production volume to be implemented, it includes material needs, ordering cycles, and the amount of orders. In concrete mixtures, there are materials added during the Mixing process (admixtures), this is aimed to alter the properties of concrete to make it more suitable and cost-effective.

Awareness of potential hazards, risks of accidents, and the need for preventive measures is a must to create a safe and healthy working environment for all workers.  The choice to implement a hydrant system is seen as an effective preventive measure in addressing potential fire risks, which are a major threat to the warehouse environment.  Thus, this research planning has not only a purely academic purpose, but also seeks to make practical contributions to strengthening the application of the Principles of Occupational Safety and Health in the industrial sector.  The planning research was done by jumping directly into the field and the data source was obtained from interviews with local authorities.  This research describes the design of the hydrant system in order to be able and meet the safety standards set by the NPFA. The results of the conservation of the warehouse of PT. Putraduta Buanasentosa then the author was able to describe the building based on the construction of the building. The warehouse PT. Putraduta Buanasentoza requires hydrant boxes of 6 pieces. The water requirements for the fire protection system based on NFPA have been calculated by considering the building size as well as the risk of fire with hydrant 6 pieces and 1 hydrant pillar, requires 4800 liters of water/minute and to extinguish the fire in the event of a fire requires a time of 15 minutes where the required water requirements in 15 minutes is 72.000 litres of water.

The 21st century has led to many transitions, mainly related to the instructional paradigm from teacher-centred to student-centred. This paradigm demands meaningful activities that emphasise learning and are able to build motivation to learn well. This has relevance to Ki Hadjar Dewantara's ideas regarding his concept of education which focuses on the question of how to become a complete human being. Therefore, this narrative literature study aims to provide a descriptive explanation of Ki Hadjar Dewantara's ideas related to the 21st century learning perspective based on existing literature. This article reveals that the ideas inherited by Ki Hadjar Dewantara have strong relevance to the construction of 21st century learning. The discussion of the relevance will be explained in this article as a common reflection for many people, especially educational agents

The 21st century has led to many transitions, mainly related to the instructional paradigm from teacher-centred to student-centred. This paradigm demands meaningful activities that emphasise learning and are able to build motivation to learn well. This has relevance to Ki Hadjar Dewantara's ideas regarding his concept of education which focuses on the question of how to become a complete human being. Therefore, this narrative literature study aims to provide a descriptive explanation of Ki Hadjar Dewantara's ideas related to the 21st century learning perspective based on existing literature. This article reveals that the ideas inherited by Ki Hadjar Dewantara have strong relevance to the construction of 21st century learning. The discussion of the relevance will be explained in this article as a common reflection for many people, especially educational agents

As an embodiment of e-government the Directorate General of Population and Civil Registration of the Ministry of Home Affairs launched the e-Office system, this system was built to improve the quality of public services in terms of correspondence, communication between regions online or digitally, in its implementation there are various problems from the provider side Such services include long bureaucratic processes. The aim of this research is to analyze how Atandie e-Office is implemented at the Directorate General of Dukcapil, Ministry of Home Affairs. The research method used is descriptive with a qualitative approach and data collection techniques through interviews and observation. This research uses indicators of e-government implementation according to Indrajit (2005:13). The results of this research show that content development has been carried out for e-Office development since 2021-2022 and there will still be final development in 2023, competency building training that has already been carried out, The connectivity of the infrastructure provided is sufficient as seen from the large server capacity provided, but we still have to add a backup server, cyber laws, the legal regulations underlying e-Office are quite strong with Minister of Home Affairs Regulation N0.7 of 2019 concerning Online Population Administration Services, citizen interfaces Staff procurement is carried out approximately once a year in two ways, capital in terms of the budget applied for the construction and development of e-Office is sufficient.

The urgency of this research lies in the importance of digital transformation in enhancing the quality of public services in Bima Regency. This study employs a qualitative descriptive approach to explore digital transformation in public services in Bima Regency. The research subjects involve local government officials, SKPD employees, and the general public to obtain a broad perspective on the obstacles and solutions in digital transformation. The research findings indicate that the implementation of e-Government faces various significant challenges, including accessibility, digital literacy, cultural and organizational changes, official support, and budget allocation. Bima Regency requires an inclusive and affordable approach to develop e-Government services accessible to all layers of society, including those in remote areas and vulnerable groups. Digital literacy emerges as a crucial factor in confronting digital transformation, and structured digital literacy programs can assist the public and government employees in acquiring the necessary knowledge and skills. Cultural and organizational changes are also vital in adopting e-Government, necessitating organizational restructuring, capacity building, and continuous learning. Support from officials and public awareness are also crucial factors in the successful implementation of e-Government. With commitment from officials and public awareness of the benefits of e-Government, local governments can accelerate technology adoption and ensure widespread participation from all layers of society. Additionally, adequate budget allocation is crucial in supporting the development of e-Government, enabling the construction of robust technological infrastructure and enhancing service accessibility.

Computer vision technology is used to improve work safety in the construction industry. The key in this project is the utilization of the YOLO method on the Roboflow platform. In addition to the Convolutional Neural Networks (CNN) algorithm, YOLO efficiently divides the image into a grid and classifies the objects in the grid by bounding box and confidence score. With the integration of YOLO, this project can achieve accurate and fast PPE detection. This project uses the YOLO method to detect head and body parts from input images. The detected body parts are then cropped and processed using the CNN method for classification. This project will also implement computer vision algorithms, including Deep Learning methods that currently have the most significant results in image recognition is CNN method, to automatically detect and monitor the use of PPE. This model achieves mAP 64.1%, Precision 73.2%, and Recall 60.2%. The Streamlit framework was used for deployment, creating a web application for PPE compliance tracking. This project, ''Health and Safety PPE Compliance Tracking'', aims to improve work safety in the construction industry. This project uses Computer Vision technology to detect, monitor, and ensure worker compliance with the use of appropriate PPE. The suggestion is to conduct further trials using other datasets in the form of photos or videos that can be done in real-time by ensuring that the colors of hats and vests do not vary too much to detect the conformity of labeling with PPE use.

Concrete is a rock made from a mixture of cement, sand, aggregate and water. For this reason, this construction material is very important to develop. One effort to develop it is by utilizing industrial waste. Like other industrial waste, wood ash waste can also be used as a partial replacement for cement. The aim of this research is to determine the effect of adding wood ash as an additive to cement on the compressive strength and tensile strength of concrete, as well as to determine the effect of varying the percentage of wood ash in the concrete mixture on the compressive strength and split tensile strength of concrete. The type of research used in this research is quantitative research with experimental methods, namely by comparing normal concrete with 3 variations of mixture to determine the compressive strength and splitting tensile strength of the concrete. The results of the research showed that the experimental compressive strength and split tensile strength of concrete on normal concrete and variations of 3 mixtures, namely 2%, 4% and 6% of cement, obtained experimental results on the compressive strength of concrete for 28 days of normal concrete with an average of the average of 25,478 Mpa decreased with a 2% variation with an average of 24,723 Mpa, and decreased drastically for a 4% variation with an average of 19,439 Mpa, and for a 6% variation with an average of 18,967 MPa. Meanwhile, in testing the split tensile strength of normal concrete with an average of 7.185 Mpa, it experienced an increase from normal concrete with a variation of 2% with an average of 7.333 Mpa, and experienced a decrease from normal concrete with a variation of 4% with an average of 6.667 Mpa, and 6%. with an average of 6 Mpa. So it can be concluded that concrete with a variation of 2% wood ash does not really affect the compressive strength of the concrete, but the more wood ash that is added, the compressive strength of the concrete will decrease. From this research it can be concluded that the use of wood ash does not achieve the planned compressive strength so it is not suitable for use in construction.                                                                                                                                                         

Concrete is an artificial stone made from a mixture of cement, sand, aggregate and water. For this reason, this construction material is considered very important to continue to be developed. One effort to develop is by improving the weak properties of the concrete itself. From this, researchers will use additional materials such as fiber palm fiber and sika visconcrate in the concrete mixture. Fiber fiber itself has durable properties and does not rot easily in open conditions or embedded in the ground, while sika visconcrate is a chemical that is used as an additive in the mixture to increase the workability, quality and strength of concrete with the desired properties. The method used in this research is quantitative experimentation. The aim of this research is to determine the characteristics of concrete using palm fiber and sika visconcrate with variations of 3%, 5% and 7% from normal concrete. The results of the research show that the average compressive strength of normal concrete is 25,572 MPa, 3% SI+SV variation concrete has an average of 27,365 MPa, 5% SI+SV variation concrete has an average of 26,704 MPa, and 7% SI+ SV variation concrete The average is 26,044 MPa. The split tensile strength test results of normal concrete averaged 6.074 MPa, 3% SI+SV variation concrete averaged 6.444 MPa, 5% SI+SV variation concrete averaged 7.852 MPa, and 7% variation concrete averaged amounting to 8,148 MPa.    

Road construction using aggregates. In Pinrang, the material used to make samples was brick ash. The aim of this research is to determine the aggregate properties and aggregate compatibility of AC-WC dan AC-BC asphalt concrete mixtures based on general specifications from Marga Buildings in 2018. This study, which was carried out in the laboratory from August to October 2023, used an experimental approach. According to the research results, the AC-WC dan AC-BC stability value obtained from adding 5% brick ash content with 5% asphalt content was 1975.31 kilograms and 6% asphalt content was 2995.74 kilograms. The MQ value is 833.46 Kg/mm 5%, and 6% 1109.53 Kg/mm, while the stability value obtained by adding 6% brick ash content with 5% asphalt content is 1564.59 kilograms and 6% asphalt content is 2399 .03 kilograms. The MQ value is 665.78 Kg/mm for 5% and 6% 891.83. The AC-BC stability value obtained from 5% brick ash with 5% asphalt content is 2023 ki.29 kilograms and 6% The large asphalt content is 2018.77 kilograms, the resulting MQ value is 613.12 from 5% and 6% is 531.25. The stability value resulting from the addition of 6% brick ash with 5% asphalt content is 1118.02 kilograms and 6% is 1122 .54 and the resulting MQ values were 272.69 from 5%, 267.27 from 6%. From the results of this research, the addition of 6% brick ash can reduce the stability of AC-WC and AC-BC, in contrast to 5% brick ash increasing stability.

To create a clean tourist village, the people of Kandri Village carry out waste management using the 3R system (reduce, reuse, recycle). This system takes the form of a waste bank that effectively manages inorganic waste while providing economic benefits for the surrounding community. One of the active waste banks in Kandri Village, Gunungpati District is the "Nuri" Waste Bank which is located at RT 09 RW 04. To develop inorganic waste management at this waste bank, it is necessary to socialize and build an inorganic waste storage space which is carried out in the form of 'Devotion' activities. to Society'. The method includes physical construction and socialization of inorganic waste management at the "Nuri" Waste Bank. The final result of this activity is the development of a physical building for storage space for segregated and weighted inorganic waste at the "Nuri" Waste Bank before it is collected by officers. Another result is the socialization of the management of the "Nuri" Waste Bank which is expected to increase community participation and provide environmental and economic benefits, especially for the people of Kandri Village, Gunungpati District.

Industry is an economic sector that uses machines and labor to produce goods or services. Manufacturing, mining, construction, energy, and technology are some of the industry subsectors. Each subsector has an important role in economic growth and development of the country. Industry plays an important role in meeting society's needs, creating jobs, increasing national income, and encouraging innovation. Small and Medium Industries (IKM) consist of small and medium enterprises operating in various sectors. SMEs make an important contribution in creating jobs, local economic growth and national industrial development. The government has paid great attention to the development of MSMEs through various programs and policies, as well as support from the private sector and financial institutions.    

The construction of the Bypass Road is one of the factors in facilitating regional development, besides that it will also facilitate the flow of traffic which of course will have both positive and negative impacts related to the land around the road. Symptoms that occur indicate that with the construction of the Balige Bypass road is in addition to spurring the growth and development of the areas around the road but also spur speculators, migrants and investors to reside and invest to open businesses along the Bypass road, which in turn is expected to improve the welfare of the people around the Balige Bypass road. The purpose of this study was conducted to determine and analyze the impact of the construction of the Balige Bypass road on the welfare of the Tambunan Balige community. This research is expected to add knowledge in knowing the impact of the construction of the Balige Bypass road on improving the welfare of the Tambunan Balige community and can be one of the reference materials for the government and related parties for improvements in improving community welfare, as well as information and reference materials for parties in need. This type of research is descriptive qualitative research. Data collection is done through observation, interviews and documentation. The results of this study indicate that the construction of the Balige Bypass road has opened up employment opportunities.

This Journal discusses the juridical analysis of compensation in land acquisition due to the construction of dam reservoirs in Bolaang Mongondow Regency. Procurement of land for the benefit of development is often collided with the stages that take time, whereas the land is needed immediately. The rules for the implementation of land acquisition state that for the acquisition of land with an area of not more than 1 hectare, it can be carried out directly by agencies that require land with the right parties. One of the problems that arise in the procurement of land is the provision of compensation to the owner of the land that will be used for construction. Article 27 of Law No. 2 of 2012 on Land Acquisition for Development states that land acquisition must include an assessment of compensation and the provision of appropriate and fair compensation to the entitled party and Article 1365 of the Civil Code. This study uses empirical research methods with a case approach. The purpose of this study was to analyze the implementation of compensation in land acquisition due to the construction of dam reservoirs and the inhibiting factors in the provision of compensation. The legal basis is a reference in the procurement of land in Indonesia. In practice, however, there are some obstacles to the award of damages. In the case of the construction of a reservoir dam, the government and companies have promised compensation to the public since 2013. However, as of 2019, the land has not been compensated to the community. In 2022, the land was flooded and could no longer be managed by the community, so the case had to be resolved through litigation. It is hoped that the results of this study can provide a deeper understanding of this problem and become a reference in improving the effectiveness and efficiency of land acquisition in Indonesia.

An anchor is a steel element that is embedded in concrete when it is cast (cast in place) or installed later (post-installed) into concrete that has hardened and is used to distribute loads (tension and shear) acting on the concrete (SNI 2847:2019). The use of anchors in the world of construction is increasingly popular to help connect concrete structures. The installation of anchors has progressed from the initial anchors being installed before casting the concrete (cast in place), progressing to the anchors being installed after the concrete has hardened (post installed) by drilling. By drilling into concrete, installing and removing anchors becomes easier. Installation of cast-in-place anchors is generally used in the design of new construction, while post-installed anchor installation is generally used in old construction for repairs or retrofitting. Anchors have several variations including hed heax, L bolt and J bolt anchor variations, but it is not yet known which anchor variation has a greater bond strength value, what are the results of the comparison of bond strength values ​​for each variation of anchor and what are the differences in the anchor bond strength capacity for each variation? the anchor. With this research, it is hoped that we can find out the bond strength and bond stress values ​​for each variation of anchor so that the comparison of the bond strength of the anchor can answer the differences in capacity of each variation of the anchor as well. Research on the bond strength of anchors based on variations in anchor shape using the cast in place method shows that the bond strength value shown at the highest loading value is the type J anchor variation with an average load of 27,816 kN, the type L anchor variation with an average load of 26,971 kN and variations of the hex head type anchor with an average load of 12.85 kN. It can be concluded that the stress value is directly proportional to the loading value. The greater the loading value, the greater the bond stress value. The highest bond stress value is found in the type J anchor variation with an average bond stress value of 151,397 Mpa, in the L type anchor variation with an average bond stress value of 147,798 Mpa and in the hex head type anchor variation with an average bond stress value of 69.953 Mpa, so the bond stress is directly proportional to the loading value.

Building Information Modeling (BIM) is a process that involves creating and managing digital information about the physical and functional characteristics of a building. This research aims to find out the process of the stages of using Sketchup and BIM software in the process of designing wide-span buildings. in the Wide-Span Building Design Process in this case the object of research focuses on the Medan Great Mosque. This research method uses descriptive qualitative in which this research describes the process stages of using Sketchup and BIM software. The results of this study explain that the use of BIM (Building Information Modeling) and Sketchup Software greatly support and facilitate the design and construction process in building design support and facilitate the design and construction process in the design of the Medan Great Mosque building.

Ezra means helper. Ezra was a prophet sent by God to lead the Israelites after the exile. After the exile ended, the Israelites intended to build a temple for God. They face many challenges and obstacles, but when God is with them everything can be overcome easily. Just like us today, when we surrender to God everything we want, God will suffice. Just as in building God's house of worship, the Israelites were so enthusiastic when they wanted to build God's house, we too as God's congregation should have the same commitment as the Israelites in building God's house. Because that is one form in which we glorify God and how we give what is best for God. We must emulate the Israelites with great enthusiasm. When they laid the first stone in the construction of God's house, they were very happy, they praised God, sang and played musical instruments such as the harp, ciracap and also the trumpet. Even among all the shouts of cheers and songs of joy, there were also those among them who were crying, moved by what they had been through so far. Such great enthusiasm enabled the Israeli people to do this and overcome all the challenges in their lives.

PT XYZ, a building construction and design company in Palembang. The number of employees in this company is 30 employees with project, finance, marketing and also human resources (HR) divisions. PT XYZ has a need to improve the efficiency of human resource management. In the current condition, the company still relies on manual processes for recruitment, attendance, layoff data management, and employee leave applications. This Personnel Information System uses the Rational Unified Process (RUP) method as a system development method. System development uses the Laravel framework, PHP, CSS, HTML programming languages. In the analysis stage using PIECES and Usecase Diagram. System development uses two main approaches, namely using the FlutterFlow low-code platform and the Laravel Framework. The final result obtained is the implementation of a web-based Personnel Information System at PT XYZ. The implementation of this system makes a significant contribution in improving the efficiency and accessibility of staffing data at PT XYZ.