Publication Search

Quality control is one of the obstacles experienced by PT. Wahana Kasih Mulia on CV. KKN. Quality control is an important thing that must be done by companies to minimize defective products. To be able to analyze product defects, researchers use the six sigma model, by formulating the Define, Measure, Analyze, Improve, Control (DMAIC) stages. The purpose of this study was to determine the level of quality control using the DMAIC method with the Six Sigma model applied to manufacturing companies. The results showed that from the measurement of the number of Omiland brand baby mattress products in the January-October 2021 period, it was found that defective products came from three main causes of disability. The distribution data of the number of product quality characteristics and company performance are at the sigma level of 3.50 with a DPMO value of 27,082.275. This shows that the company has not been able to meet process quality standards. Based on this research, the recommendations for improvement given are that the company needs to provide periodic training to employees, perform maintenance on machines, apply a clearer and more detailed Standard Operating Procedure (SOP), conduct tighter supervision of newly arrived raw materials and the company needs to place quality control at every stage of the production process.

Study table is one of the supporting learning activities but the current study table design is not in accordance with consumer needs, especially for children. The development of this study table product is expected to answer the needs of custumers or consumers and produce an ergonomic study table. This multifunctional learning folding table product uses the parameter measurement of the Quality Function Deployment (QFD). The result obtained based on the customer show that there are 7 attributes (customer requitment) and 4 technical parameters ( technical response). In this regard, the product development of a multifuntional folding study table uses the Quality Function Deployment (QFD) method using teak wood. This table also has several features, namely a reading light feature, a glass holder, a storange feature, equipped with a simple design, attaractive practical colors and ideal dimensions so as to increase comfort inusing the folding study table product.

Breastfeeding is one of the best for babies because by breastfeeding the baby's nutritional needs will be met, at the age of more than 25 years, a third of women in the world (38%) agree not to breastfeed their babies (IDHS, 2012). Breastfeeding is an unrivaled way of providing ideal food for the healthy growth and development of babies. In addition, it has a unique biological and psychological effect on the health of mothers and babies. Anti-infective substances contained in breast milk help protect the baby against disease. However, breastfeeding is not always able to run normally, not a few mothers complain such as breast swelling due to the accumulation of breast milk, because the milk is not expelled or sucked by the baby (Heryani, 2012). The purpose of this study was to determine the relationship. To determine the relationship between knowledge and attitudes of breastfeeding mothers about ASI dams at PBM Hj. Mariani Makassar City. This type of research is an analytic survey with a cross sectional study approach. population and sample were all postpartum mothers from December 2021 to February 2022 (13 people) with accidental sampling technique which was then analyzed using chi-square. The results showed that there was no significant relationship between mother's knowledge and attitudes towards breastfeeding dams. It is hoped that breastfeeding mothers and families will be active in finding out about ways to prevent breast milk dams

The still low protection of IPR for SMES products needs to be strengthened to protect the ownership rights of inventors on the recognition of other parties. The Harmoni Semanggi SMES Center of Surakarta City is one of the centers made by design by the Surakarta City Government. The SMES is a derivative of the batik SMES which is a superior product of the City of Surakarta and has export potential. However, the resulting product does not yet have IPR protection, so it is necessary to carry out community service activities in the form of socialization and counseling and assistance in obtaining IPR. Activities carried out by conducting outreach and assistance to the Semanggi SMES center actors. The result is an increase in partner knowledge about the urgency of IPR protection.  

The emergence of the current COVID-19 pandemic has a significant impact on people's activities from various aspects of life, both in foreign countries and in this country in various sectors, namely economic, political, social and cultural. The Covid-19 pandemic has hit almost 3 years and has not been fully controlled. Government policies that have been made and implemented require good management, for that full support from the community is also needed. The implementation of existing policies, ranging from PSBB, transitional PSBB, emergency PSBB, New Normal PSBB, Emergency PSBB 2, PPKM, emergency PPKM, Micro PPKM is felt to have not shown a significant decline, this makes the government continue to strive to continue to make policies and regulations. To reduce the rate of suspected Covid-19 contamination, the last government policy through the Java and Bali Level PPKM showed good results, was able to suppress and control the Covid-19 pandemic, Covid-19 control will not work if only the government does it, but requires participation of all elements of society in their respective areas. The government really needs the participation of various parties, namely the business world, the community, Covid-19 volunteers, community leaders and the media. In addition, community behavior is expected to be disciplined in implementing the health protocol, namely 3M (maintaining distance, wearing masks and washing hands frequently), with 3M discipline being the key to strengthening the implementation of 3T (testing, tracing, treatment) down to the village level. In addition, social distancing, long-distance travel restrictions, and proper promotion and education to the public are forms of public health efforts in breaking the chain of the spread of the Corona virus. In fact, there are still people who don't follow the rules, go out on motorbikes, don't wear masks and helmets, don't maintain social distancing, still crowd in the market, they tend to ignore the rules for wearing masks, even though there are rules from PerWali Semarang number 57 of 2020 article 6 paragraph 3

This study aims to determine the appropriate use of learning media in the form of media for the use of sub-materials for the use of Indonesian biodiversity for class X, plant-based high schools. The research method used is descriptive. The research was conducted in 2 stages, namely plant inventory and media feasibility test. Inventory of medicinal plants in the village of Selat Remis was carried out by means of observation, interviews, and documentation. The results of the plant inventory in Selat Remis Village found 77 species of plants used by the community as used according to needs carried out in three stages of media creation, media validation, and data analysis. The magazine media was validated by two Biology education lecturers and three high school teachers who were determined using purposive sampling, namely, State Senior High School 1 Teluk Pakedai, State High School one Rasau Jaya, and Madrasah Aliyah Negeri 1 Kubu Raya. The validation assessment uses a Likert scale and data analysis based on the Lawhse formula (1975) by five validators and obtains a Content Validity Index (CVI) result of 1.00 so that the contents of the magazine media on the sub-material of the use of Indonesian biodiversity for class X Senior high school are said to be valid and feasible to use.

Human Development Index or HDI and Economic Growth in the Regency/City of Banten Province needsto be studied whether the Human Development Index and Economic Growth have influence or not. the studied variable are Independent Variable HDI and Dependent Variable Economic Growth . The research methods used is quantitative method using document data from Central Statistics Agency (CSA) with some literature review. The result showed that HDI had no significant effect on Economic Growth. Where if there is a decrease in the Human Development Index, it can’t be confirmed that it will reduce Economic Growth in Banten Province.   Keywords: HDI, Economic Growth, Banten

Motivation is the most basic factor in educational institutions to mobilize the potential of human resources to foster enthusiasm in working with organizational goals. The second factor is the leader as a leader who is able to mobilize human resources. Sensitivity leaders are expected to understand the nature and human needs. The hierarchy of human needs is expected to be another consideration in motivating staff, teachers (ustadz) or employees. Five things human needs that need to be considered are: physiological, safety, social, esteem and self-actualization needs. If a leader puts forward human values ​​in motivating his subordinates, then productivity and success can be realized in the institution or agency he leads.

Stick is a snacksthat haveslong, flat, savory andscrunchy taste madesfrom flour, eggs, butter, water and othersadditional seasonings. Food by-product from tofu has the potential to be used as an ingredientsfor stick makingsbecause of high protein and fiber content. In addition, local rawsmaterials such as mocaf floursand green spinach are rich in fiber content that can fulfill fiber needs of the body. This research is experimentswith purpose was to determine the physical, chemical, sensory characteristics and determine the formulation of sticks that produce high levels of fiber andsprotein. The experimental design is a completely randomized design (CRD) with the first factorscomparing tofu waste flour and mocaf flour (50: 150, 100: 100 and 150: 50) with the additionsof spinach (10%, 20% and 30%). The results showed that the stick formulation with the additionsof the best green spinach based on chemical and organoleptic values were 150 grams of tofuswaste flour, 50 grams of mocaf flour with the addition of 60 grams spinach that have a moisture content 3.742%, an ash content 2.353%, a protein 8.317 %, crude fiber 1.997%, fat 12.115% andscarbohydrate 73.473%. Based on the physical andsorganoleptic values, the tofu dregs flour was 50 grams, 150 grams of mocaf flour with the addition of 20 grams of spinach, the color yield was 2.467%, the flavor of tofu by product 2.200%, the flavor of mocaf was 2.467%, the flavor of spinach was 2.200%, the texture was crispy 3.800% and the total preference was 3.200%.s

Indonesia is currently facing various health and nutrition problems. Indonesia experiences a triple burden of nutritional problems, namely malnutrition, excess nutrition (obesity) and micronutrient deficiencies. To overcome this nutritional problem, it can be done by implementing balanced nutrition. Balanced nutrition is a daily food composition that contains nutrients in types and quantities that suit the body's needs, taking into account the principles of food diversity or variety, physical activity, cleanliness and ideal body weight.Objective: Service activities are carried out to increase knowledge about balanced nutrition, determine nutritional status, and as a training tool for nutrition students in providing nutrition and health education to the community. This activity is expected to increase knowledge of balanced nutrition for children and adolescents at the Qurrotu A'yun Batam Center Orphanage.Conclusion: This counseling activity was carried out at the Qurrotu A'yun Batam Center Orphanage, Batam City, which was attended by children and teenagers. The activity consisted of an opening led by a team of lecturers and continued by reading material presented by a team of lecturers and students. Then the moderator returned to the event for a question and answer session and continued with measuring nutritional status and providing snacks to posyandu participants.

Human needs for vital living air, ranging from ablution, bathing, washing, latrine, cooking, washing, and so on. The limitation of clean water from PDAM is a necessity, because to meet the air needs of every resident who needs abundant raw water and adequate infrastructure. UNTAG Semarang campus which is located on Jl. Pawiyatan Luhur, Bendan Duwur Village, Gajahmungkur District, Semarang City has 7 main buildings. All of these buildings have daily water needs for toilets, ablution and watering plants around the buildings. The highest potential for rainwater harvesting at the UNTAG Semarang Campus is in February with the following potential catches: Faculty Building 233 m3, Fisip & FTP Building 211 m3, Faculty & Rectorate Building 321 m3, FEB & YPP 17 Building 229 m3, Rusunawa Building is 48 m3, Campus Mosque is 26 m3 and PMB Building & Library is 48 m3.

The Government's goal to make Indonesia an Maritime Country must be supported by all elements of society, especially is from the education sector. As one of the maritime education institutions to improve competent human resources in its field, it needs training and supporting facilities and infrastructure. One way to increase competence is to supply cadets with capabilities in the field of operation and maintenance of ship machining. Synchronous generator is one of the important components in ship machining. Therefore, the ability to operate and maintain generators is absolutely necessary for cadets in the world of work. Standard selection of generator in the Shipbuilding Laboratory follows Government standards through the Ministry of Transportation Regulations. To choose the best electricity generator, a special method is needed. The solution to this problem is the use of the Analytical Network Process (ANP) to determine synchronous generators that meet the quality standards and specifications of stakeholders.By implementing ANP, the synchronous generator is obtained according to quality standards with the specifications desired by stakeholders. In applying ANP, weighting is based on criteria, namely: durability, maintenance, spare parts, specifications and price. Then obtained an electric generator with appropriate quality standards and specifications.Results of data processing using the ANP method obtained electical generator alternative selection with each weight is adalah CUMMINS GFS-C30KW 41,6 %, HARTECH HT35Y 33,9 %, and CATERPILLAR C2.2 24,5 %.

The denim jacket is one of the fashion needs young people have to have for stylish needs. Not only was the durability of the denim jacket also made clothing that was easily combined with various garments. While the denim jacket also has certain wear, the denim model tends to have simple cuts, besides the type of denim itself being monotonous and without motive. Thus the application of quilting technique was fitting to show a newer jacket with a striking combination of cloth on quilting's motive. The purpose of the denim jacket was to know the process of applying quilting techniques on the denim. The methodology used was observation methods, literature methods and documentation methods. The process of application of quilting techniques on the making of denim jackets goes through three stages of designing denim jackets, the preparation of tools and materials, specifying sizes, creating basic patterns, breaking jacket patterns, cutting materials, merader materials, and sewing. Quilting's pattern requires high concentration and precision because it has to watch the angles of the motif connection. A concern when quilting was an polyester layer of layered foam that tended to be slippery shifted the furs. Therefore furing cuts need to be wider than the patchwork pattern. The thickness of the layer of foam should not be too thick because it will make the jacket rigid and heavier.

This research aims to build a career development center information system at the Ketapang State Polytechnic. The results of this research are then used as a scientific study in the field of design and development of information systems. In addition, this career development center information system can be implemented at the Ketapang State Polytechnic so that it can contribute to the accreditation process of institutions and study programs, as a forum for building alumni networks and the availability of an alumni database, as a collection of important input/information for the development and improvement of universities. higher education (administration, curriculum and study design). Career centers at universities function to bridge the information needs of the world of work required by universities and to answer the challenges of the world of work. This career development center information system is based on the needs of alumni, tracer studies for campus accreditation, knowing the educational outcomes produced by universities, knowing the contribution of universities to existing competencies in the world of work, for monitoring college graduates when entering the word

At the present time of the pandemic, it is difficult for the world's most unusual cuttlefish to market its products. Thus, umkm needs to be provided with facilities to market the products online. Special-based backends are one of the media for selling by-products on the catapult. The purpose of this research is to construct typical web-based appendage by-by-products. The purpose of this research is to construct typical web-based appendage by-by-products. Research methods used in the construction of systems on this research are the methods of research and development (R & D). This study provides several design systems, the design of system architecture, the DFD system, the design of the interface, and the design of system testing. The system was created using the framework laravel. As for the results of the final assignment research "typical web-based appendage". In this system, there are two users, the user as the store and the user as the buyer. On the user as a store there are several features that include input from store products, editing from products, confirmation of deliveries, responding to comments given by the buyer on the product, viewing the order data done by the buyer, and editing the store's data. While the user's features as the purchaser look at the product's data, see the store's data as a souvenir, order a by-product payment, confirm the order has been accepted, give an assessment of the product's already received, and edit the customer's data. The system was tested by using black box methods testing to see the effectiveness of a system built with test variables was 100%.

Information technology is a technology used to process data, including processing, obtaining, compiling, storing, manipulating data in various ways to produce relevant, accurate and timely information, which is used for personal, business and government purposes and is strategic information for decision making, in recording fixed assets for example, must be managed properly because the need for the data is frequent intensity, the number of items is not small so it is impossible to memorize, the calculation of depreciation of fixed assets of a company needs to be done at the end of every year because it will affect the book value and depreciation expense on the balance sheet and depreciation expense on fixed assets on the income statement. This depreciation calculation can also be used as a reference in the allocation to purchase new assets if the existing fixed assets can no longer be used. Obstacles in preparing depreciation reports if not resolved immediately will have a bad impact on schools, for example being late in submitting annual tax reports due to the long preparation of depreciation reports will result in schools being fined for being late in reporting the annual corporate tax return. With the accounting information system for depreciation of fixed assets, it is expected that it will facilitate officers in managing fixed asset data and depreciation reports. The new system that will be designed is web-based, so that it can be accessed at any time by interested parties and makes coordination time more effective.

One of the main factors in achieving effective and efficient performance isattention to human resources. Having reliable and truly appropriate human resourceswith needs is the hope of every manager. The company needs employees with the appropriate abilities with job roles. As for the position of PT. Bogowonto Primalaras still uses a work period limit where employees cannot fill vacant positions at any time, based on the criteria of tenure an employee fulfills the term of service that is in accordance with his expectations. where on assessment in absenteeism is carried out by collecting daily report data that makes HRD send one by one who has sent the daily report. Where is the report related to the productivity criteria of an employee who has reached the target or not.

Rice is the most important staple food for humans to have energy to carry out activities. The purpose of this study is to provide information to the public in the form of a reference for selecting rice based on consumer interest, so that it can be used as a decision making in buying rice. The Mamdani method is a method that is able to solve problems in the case of rice selection based on consumer references. The work process of the Sugeno method consists of four parts, namely fuzification, inference engine, implication function amplification and the last one is defuzzification. The final result, the Mamdani method has the characteristics of using the AND operator and using the min-max value. This research is in the form of a decision-making system in rice selection based on references from consumers by looking at four aspects of criteria such as price, quality, taste, and shape variables, these four aspects can be used as a reference in rice selection. Sugeno fuzzy logic to get the final value.The Mamdani method is a very effective method in selecting rice according to the needs and interests of consumers so that potential consumers can easily choose rice according to their interests and desired criteria.

Management of medical actions carried out in handling patients who are ODP (people under monitoring), OTG (asymptomatic people), PDP (patient under monitoring) and positive Covid-19 patients is carried out based on assumptions, such as self-isolation, hospitalization, or special treatments in the ICU (Intensive Care Unit) room. The condition of the body in each patient is different, a patient may have same symptoms but the treatment is different, especially in elderly patients. Many problems occur in determining medical action because the patient's body condition is different. Therefore, it needs to be appointed as a research. The research method used in this study was Nive Bayes algorithm with supporting application Rapid Miner. It was applied to carry out the process of testing on patient data as much as 500 data, 25 variables or patient symptoms and 3 outputs as a form of medical action. Based on the results of the analysis carried out in this study, prediction of medical actions for ODP, PDP, OTG and positive Covid-19 patients were obtained by comparing training data with testing data using Rapid Miner application. It resulted that an accuracy rate of 76.00% was obtained

Art education in kindergarten is part of the process of forming a whole individual in accordance with the goals of national education. Art education includes dance, music, visuals and drama. This activity aims to provide assistance to kindergarten / early childhood teachers in artistic creativity and creativity, especially painting activities using local wisdom-based media so that they can be applied in teaching and learning activities in kindergarten / early childhood education. As for art and reativity, what is meant is not only to form skilled students at imagination through fine arts, but also to form appreciative and creative personalities through the experience of art processing. This activity can contribute not only to the development of teaching materials, but also to the ability of kindergarten / early childhood teachers to create art, especially art and creativity which can have a positive effect on the development of teacher skills by packaging teaching materials based on art and creativity according to the needs of garden children childhood and early childhood education. This PKM activity was attended by Kindergarten / Early Childhood Teachers who are members of the entire West Semarang District, Semarang City.