Publication Search

This study aims to determine the influence of service quality on the satisfaction of mothers with toddlers at Posyandu Melati Mekar RW 05, Margajaya Village, Ngamprah District, West Bandung Regency. The method used is a quantitative approach with data collected through questionnaires distributed to 70 respondents using a saturated sampling technique. The results showed that the service quality at Posyandu Melati Mekar was in the "very high" category with a score of 3,007 out of a maximum of 3,500, while the level of satisfaction among mothers was in the "high" category with a score of 2,900. The t test showed a t value of 9.592, which is greater than the t table value of 1.995, with a significance level of 0.001, indicating a significant influence of service quality on mother satisfaction. A correlation coefficient of 0.758 indicates a strong and positive relationship, while the determination coefficient of 57.5% shows that service quality greatly contributes to customer satisfaction. Thus, improving service quality can directly increase user satisfaction with posyandu services

This research aims to analyze the protection of state forest areas against unauthorized forest product collection in Pasangkayu Regency, specifically from the perspective of preventive and repressive legal protection. The research method used is normative juridical with a descriptive-analytical nature, utilizing secondary data collected through literature studies. The results indicate that forest area protection in Pasangkayu Regency is currently still dominated by a repressive approach, namely legal actions taken after violations occur, such as enforcement operations and criminal proceedings. However, this approach has proven ineffective in providing a maximum deterrent effect due to the high rate of violations triggered by low legal awareness and the community's economic dependence on forest products. Meanwhile, preventive efforts such as monitoring and legal counseling have not operated optimally due to limitations in human resources and budget. Therefore, a balance between preventive and repressive approaches is required, along with strengthening community participation through economic empowerment to enhance the effectiveness of forest protection.

Limited competence among teachers in systematically managing scientific references remains one of the main challenges in producing high-quality scientific writing. This community service activity aims to enhance the competence of Biology MGMP teachers in Sidoarjo in reference management through a Smart Referencing approach using the Mendeley application as a Reference Management System. The methods employed include training sessions, hands-on practice, and mentoring in the use of Mendeley, covering installation, library management, and the automatic integration of citations and bibliographies into scientific documents. The evaluation of the activity was conducted through questionnaire distribution to measure participants’ improvement in understanding and skills. The analysis results indicate that several technical aspects, such as the use of the Mendeley plugin in Microsoft Word (score = 3.40) and the overall ease of use of the application (score = 3.00), fall into the high category on a maximum scale of 4. This suggests that although the application is perceived as useful, there is still a need for initial adaptation in its usage. Furthermore, the overall mean score of all questionnaire items is 3.74, with a satisfaction index of 93.5%, which falls into the very high category. These findings indicate that the Mendeley-based Smart Referencing training received very positive responses and was effective in improving participants’ understanding and skills in reference management for scientific writing.

The use of moldboard plows in agricultural land preparation often faces wear problems on the share component, leading to increased maintenance time and reduced operational efficiency. This study aims to design and analyze a modular concept for the plow share to improve maintenance and repair efficiency without compromising structural performance. The research methods include field observation, component dimension measurement, design modeling using CAD software, and structural analysis using the Finite Element Analysis  (FEA) method. In addition, maintenance ease was evaluated through a questionnaire based on a rating scale. The results show that the modular design significantly improves maintenance and repair efficiency, with an average score of 4.59 categorized as very good. Structural analysis indicates that the modular design reduces maximum stress on the moldboard and slightly decreases deformation, reflecting improved structural stiffness compared to the conventional design. However, the Safety Factor on the share component remains below the acceptable limit, indicating the need for further development. Overall, the modular design provides an effective solution to enhance maintenance efficiency while maintaining the structural performance of the moldboard plow.

The shaft is a crucial component in mechanical systems because it serves to transfer power and rotational motion throughout the machine. This research aims to assess the structural strength and operational performance of shafts used in a tire shredding machine through numerical simulation methods in order to achieve a safe and efficient design. The study involved several stages, including the development of shaft geometry models, the determination of boundary conditions, load application, mesh generation, and stress analysis using the finite element method. Two shaft configurations were examined: a 59 mm diameter shaft made from AISI 1045 steel and a 49 mm diameter shaft manufactured from ASTM A36 steel. The simulation results indicate that the 59 mm shaft experiences a Von Mises stress of 8.9 × 10⁻⁵ MPa, with a maximum displacement of 0 mm and a safety factor of 15. Similarly, the 49 mm shaft shows a Von Mises stress of 8.4 × 10⁻⁵ MPa, no measurable displacement, and a safety factor of 15. These findings confirm that both shaft designs are capable of safely withstanding the applied working loads. In addition, cutting system tests revealed that a 24-tooth blade achieved an efficiency of 26.9%, while a 40-tooth blade reached only 22.3%, indicating that the 24-tooth configuration provides better performance.

A single paragraph, maximum 250 words. Abstract content must contain (1) an overview of the object of research, (2) problems, and research objectives, (3) proposed methods, (4) main findings and results and synthesis of main ideas, and (5) conclusions. In recent years, the Iran–United States conflict has not only unfolded within the geopolitical arena but has also been intensively constructed through international media framing that shapes how global audiences understand this reality. In the context of the digital information overflow, media no longer function merely as conveyors of facts; rather, they act as agents that construct meaning, evoke emotions, and shape the social perceptions of audiences. This study aims to analyze how international media framing constructs representations of the Iran–United States conflict and how audiences interpret such discourse within their social experiences. This research adopts a qualitative approach with a Critical Discourse Analysis (CDA) design. Data were collected through document analysis of 25 news articles from both Western and non-Western media, as well as exploratory interviews with nine participants from academic backgrounds. Data analysis was conducted using a thematic approach based on Norman Fairclough’s three-dimensional model. The findings reveal three main patterns: the construction of threat through media language, moral polarization that produces a dichotomy of “us versus them,” and the negotiation of meaning by audiences, which is reflective and not always linear. These findings indicate that audiences are not entirely passive; rather, they actively interpret and, at times, question media framing. Theoretically, this study extends Critical Discourse Analysis by incorporating the dimension of audience experience into the discursive process. Practically, it underscores the importance of critical media literacy in navigating the complexity of global information and opens avenues for further exploration of the relationship between discourse, power, and social experience.

Advances in digital technology have opened up significant opportunities for utilizing media as a tool for education, creativity, and religious outreach. However, the low level of digital literacy among the public, particularly the younger generation, means that the use of digital media remains largely limited to entertainment. This community service activity aims to enhance participants’ understanding and skills in utilizing digital media productively through the seminar “Halal Profits, Maximum Rewards through Digital Da’wah” at MWC NU Waru Sidoarjo. The method employed was Participatory Action Research (PAR) with data collection techniques involving observation. The results of the activity showed an increase in participants’ knowledge regarding digital da’wah, the positive use of social media, and halal economic opportunities through digital content. Additionally, participants demonstrated high enthusiasm and began to understand the importance of using technology wisely and productively. This activity is expected to serve as a first step in improving digital literacy, community empowerment, and the strengthening of Islamic values through digital media.

Lumbar flexibility refers to the maximum capacity of the muscles in the lumbar spine to move freely. Impairment in functional movement may lead to restricted mobility, which can be influenced by disruption of biomotor components, particularly lumbar spinal flexibility. Flexibility may be affected by both internal and external factors, including age and duration of sitting during work. This study aimed to analyze the relationship between sitting duration and age with lumbar flexibility using the Modified Schober Test among employees of PT Bank Syariah Indonesia, Lhokseumawe City. This study applied a cross-sectional design and was conducted in December 2023 in the prayer room area of the PT Bank Syariah Indonesia branch office. Sampling was carried out using a total sampling technique involving 46 respondents. Data collection was performed by measuring lumbar flexibility using the Modified Schober Test method. The results showed that the highest proportion of respondents had limited lumbar flexibility, accounting for 24 respondents (52.2%). The majority of respondents had a sitting duration of 7–9 hours, totaling 26 respondents (56.5%), while the largest age group was 26–35 years, consisting of 23 respondents (50%). Spearman-Rank correlation analysis demonstrated a relationship between sitting duration and lumbar flexibility measured by the Modified Schober Test (r = 0.662). In addition, the relationship between age and lumbar flexibility also showed a correlation based on the Spearman-Rank test (r = -0.321). The study concluded that longer sitting duration and increasing age were associated with greater limitation in lumbar flexibility among employees of PT Bank Syariah Indonesia, Lhokseumawe City.

Urban development has resulted in an increase in impermeable surfaces, increasing the risk of runoff inundating the road network. This situation occurs in the drainage system on Jl. Letjend S. Parman, Jl. Emo Kurniaatmaja, and Jl. Pulau Banda, Pasirkareumbi Village, Subang Regency. This study aims to evaluate the hydraulic performance of existing channels and develop redesign guidelines to reduce the risk of local flooding. The methods used include hydrological analysis of daily maximum rainfall data from the Subang rainfall station, rainfall frequency analysis using the Generalized Extreme Value (GEV) distribution, Intensity-Duration-Frequency (IDF) curves, and hydrological and hydraulic simulations using the Storm Water Management Model (SWMM). Model parameters include sub catchment area, rainfall intensity, time of concentration, infiltration using the Curve Number method, channel dimensions, cross-sectional shape, channel material, and the Manning coefficient. The results indicate that the GEV distribution provides a good fit for determining design rainfall. Based on the typology of a metropolitan city and a catchment area of ​​26.04 ha, the modeling period is 2 to 5 years. The SWMM simulation results indicate that some channel segments have very high flow velocities, potentially causing scour, while other segments have very low velocities, potentially causing sedimentation. This confirms the need for evaluation and restructuring of channel dimensions and slopes to improve the hydraulic performance of road drainage and reduce localized flooding.

Article 210 of the Compilation of Islamic Law (KHI) limits gifts to a maximum of one-third of the donor’s assets as a form of protection for the rights of heirs and to uphold social justice. However, in practice, land gift deeds drawn up by PPATs/PPATSs are still found to exceed this limit, thereby giving rise to controversy and legal disputes in the form of lawsuits seeking the annulment of such deeds in court. This phenomenon indicates a disconnect between legal principles and practical implementation, leading to legal uncertainty. This study aims to analyze the legal status of land gift deeds that exceed the maximum limit, legal protection for bona fide donees, and the responsibility of PPATs in their drafting. The research method employed is a normative legal approach using legislative, conceptual, and case-based analyses, along with primary, secondary, and tertiary legal sources analyzed qualitatively. The results indicate that a land grant deed exceeding the maximum limit retains limited legal validity, specifically only for the portions compliant with the provisions of the KHI. Legal protection for the grantee can be guaranteed if there is consent from all heirs. Furthermore, the PPAT bears civil, criminal, administrative, and ethical responsibilities regarding the deed drafted. Therefore, strengthening regulations, enhancing public legal literacy, and ensuring the PPAT’s due diligence are necessary to guarantee legal certainty and reduce disputes.

separating and shredding organic and inorganic waste. This study aims to analyze the process of shredding household waste using the Computational Fluid Dynamics–Discrete Element Method (CFD-DEM) and determine the optimal operational parameters based on variations in rotor speed. The research method uses numerical simulation with SolidWorks 2024 software for geometric modeling and Ansys Rocky 2023 R1 for CFD-DEM simulation. The rotor speed variations used are 1000 RPM, 2500 RPM, and 4000 RPM with a mass flow rate of 4 tons/hour and a simulation duration of 2 seconds. The parameters analyzed included particle mass flow rate, shredding characteristics, and power consumption. The simulation results showed that a speed of 1000 RPM produced the most optimal performance with a maximum capacity of ±4 tons/hour and a stable shredding response compared to other variations. At 2500 RPM, there were high fluctuations with low capacity (±0.6 tons/hour), while at 4000 RPM, the capacity was moderate (±1.1 tons/hour) but still did not exceed the performance of 1000 RPM. Based on these results, it can be concluded that a rotor speed parameter of 1000 RPM is the most effective condition for improving the grinding efficiency and production capacity of a hammer mill-type Depackaging machine based on CFD-DEM simulation.

The Free Nutritious Meal Program (MBG) is a strategic initiative by the Indonesian government to address the long-standing issues of malnutrition and stunting, which have significantly hindered human resource (HR) development in Indonesia. The program aims to improve children's nutrition and reduce stunting by providing free nutritious meals, particularly in areas with limited access to healthy food. This study aims to analyze the legal framework of MBG, its effectiveness in achieving its goals, and its impact on national development. Using a qualitative approach, the study analyzes the implementation of MBG through document analysis, interviews with relevant stakeholders, and field observations. The findings highlight challenges within the program, including imbalanced food distribution, inadequate infrastructure in remote areas, and suboptimal food quality control, which resulted in several food poisoning incidents in 2025. Nevertheless, the program has a positive economic impact by empowering micro, small, and medium enterprises (MSMEs) involved in food supply. The study suggests strengthening the monitoring system, improving budget management, and better coordination between government sectors and communities to maximize the success of MBG. It also emphasizes the importance of nutrition education campaigns to support the program's goals. Overall, MBG is a crucial step toward creating a healthier and more productive generation, supporting the achievement of Indonesia's Golden Generation by 2045..

Sweet corn is a high-value horticultural crop with steadily increasing demand for both fresh consumption and use as a raw material in the food industry. This study aims to evaluate the effectiveness of NPK 16-16-16 fertilizer on the growth and yield of sweet corn. The research was conducted at Sindangbarang Experimental Field, Faculty of Agriculture, IPB University from July to October 2025. This experiment used a Randomized Complete Block Design (RCBD) with a single factor, namely the dose of fertilizer application. Treatments were using fertilizer dosages of 0, 50, 0,75, 1,00, and 1,50 NPK 16-16-16, with a control treatment for comparison. During the vegetative phase, sweet corn exhibited similar growth responses across all fertilization levels relative to the control. However, all fertilizer doses significantly improved stover weight, cob weight with and without husk, cob length, cob diameter, yield per plot, and overall productivity compared to the control. The application of NPK 16-16-16 fertilizer at the recommended (1.0) rate achieved the highest relative agronomic effectiveness (103.11%), corresponding to a 1.03-fold yield increase over the control and outperforming the comparison treatment. Application of NPK 16-16-16 at the 1.0 recommended dose is suggested as the most efficient fertilization strategy for sweet corn production, as it maximizes yield and productivity without unnecessary increases in fertilizer input.     

Baby blues syndrome can have negative implications both in the short and long term, this has the potential to cause a tendency for passive attitudes in pregnant women, and result in neglect of the baby's needs, including a lack of attention and touch from the mother. This study aims to analyze the relationship between the contribution of husbands and the role of health workers with the level of understanding of pregnant women regarding Baby blues syndrome at the Lueng Bata Community Health Center, Banda Aceh. The study applied an analytical method with a cross-sectional approach, and involved all 73 pregnant women registered at the study location, with a total sampling technique. The data collection tool used was a questionnaire. The study took place from May 3 to 25, 2025. Based on the findings, there was a significant relationship between husband's support and pregnant women's knowledge regarding Baby blues syndrome (p = 0.001), and a significant relationship was also identified between the role of health workers on pregnant women's knowledge regarding the condition (p = 0.003). From the results obtained, it can be concluded that husband's support and the involvement of health workers mutually contribute to increasing pregnant women's understanding regarding Baby blues syndrome in the service area of ​​the Lueng Bata Community Health Center. It is recommended that health workers be more proactive in providing education and counseling regarding this syndrome so that pregnant women's knowledge regarding Baby blues syndrome can be maximized.

The architecture of consumer decision-making has completely changed due to the quick development of recommendation systems based on artificial intelligence (AI). The majority of earlier studies saw algorithms as instruments for forecasting and maximizing preexisting preferences. This study, however, makes a different claim: algorithmic curation actively shapes preferences rather than just reflecting them. This study creates and evaluates a structural model that examines the impact of algorithmic curation intensity on perceived search autonomy, identity resonance, affective evaluation, and the development of initial preferences. The model is based on identity-based consumption theory and the literature on human-AI interaction. The study's findings, which are based on survey data from Generation Z consumers and Structural Equation Modeling (SEM) analysis, demonstrate a contradictory dynamic: algorithmic curation improves identity resonance and directly influences initial preferences while simultaneously decreasing feelings of autonomy. The primary mediating mechanism that links algorithmic exposure to emotional assessment and preference creation is identified as identity resonance. In addition to introducing the concept of algorithmic consumer formation as a new conceptual framework for comprehending consumer behavior in the AI-based digital era, our findings expand the notion of bounded rationality toward algorithmically bounded agency.

The Fréchet distribution is one of the commonly used Extreme Value Distributions (EVDs) in statistical modeling and heavy-tailed data analysis, where it plays an important role in describing product lifetimes as well as climatic and financial phenomena. The estimation of its two parameters, namely the shape parameter and the scale parameter, is traditionally based on the Maximum Likelihood Estimation (MLE) method. However, maximizing the likelihood function for this distribution involves numerical difficulties, which necessitates the use of numerical optimization methods. In this study, we propose the use of the Aquila Optimizer (AO), a recent metaheuristic algorithm inspired by the hunting behavior of eagles, as an efficient numerical tool for maximizing the likelihood function of the Fréchet distribution. The objective function was formulated as the negative log-likelihood function (-LogL), and the Aquila Optimizer was employed to obtain the optimal estimates of the distribution parameters. Several simulation experiments with different sample sizes were conducted to compare the performance of the proposed method with a conventional approach represented by the Nelder–Mead method, using the Mean Squared Error (MSE) criterion. The simulation results demonstrated that the Aquila Optimizer outperformed the Nelder–Mead algorithm in many cases, although the superiority was slight. The results also showed that both algorithms were consistent, as their MSE values decreased with increasing sample size. In addition, a practical application was carried out using real data, and the results of the survival function estimation indicated a good fit.

This study aims to analyze the implementation of pedagogical competence among Christian Religious Education teachers and its implications for students’ learning interest at SMTK Katharos Bekasi. The study is based on the importance of teachers’ pedagogical competence in creating effective learning environments and increasing student engagement in the classroom. A qualitative approach with a descriptive design was applied in this research. Data were collected through classroom observations, questionnaire-based interviews with students, and literature review. The findings show that teachers’ pedagogical competence is categorized as good, with an average score of 33.8 or 75.1% of the maximum score, reflecting effective classroom management, appropriate material delivery, and proper student guidance. Students’ learning interest is also categorized as good, with an average score of 32.8 or 72.9%, indicating active participation and positive engagement in the learning process. Therefore, pedagogical competence positively influences students’ learning interest, and continuous improvement is needed to enhance learning effectiveness.

This study was conducted with the aim of identifying and analyzing the influence of price, innovation, and service quality variables on consumer decisions in using the Maxim online transportation service. The background of this research is the increasing competition in the online transportation industry in Indonesia, which encourages companies to continuously improve their marketing strategies to attract and retain customers. As one of the rapidly growing online transportation service providers, Maxim needs to understand the factors that influence consumer decisions in order to compete effectively. The method used in this research is a quantitative approach, with data collected through questionnaires distributed to 134 respondents who are active users of Maxim's transportation services. The data collected were analyzed using multiple linear regression to examine the effect of each independent variable (price, innovation, and service quality) on the dependent variable (consumer decision). Validity and reliability tests were also conducted to ensure the research instrument was appropriate for use.The results of the study show that all three independent variables—price, innovation, and service quality—have a positive and significant effect on consumer decisions. This means that the more competitive the price offered, the higher the level of innovation provided, and the better the perceived service quality, the more likely consumers are to choose and continue using the Maxim online transportation service.These findings provide practical implications for Maxim’s management in designing more targeted marketing strategies and service improvements, as well as strengthening the company’s position in facing market competition.

This article analyzes the role of Work-Life Balance, Motivation, and Work Environment on Employee Performance in the manufacturing industry. Work-Life Balance (WLB) can be measured on time management, mental health, job satisfaction, and overall performance. Work Motivation is seen from intrinsic and extrinsic factors, while the Work Environment is seen from a conducive, safe, and comfortable atmosphere. This study uses a quantitative approach using SmartPLS. This method was chosen because of its effectiveness in testing complex causal models with many variables and its flexibility assuming data distribution. Primary data was collected from 98 employees via Google from Likert scale, using the seneus technique. Analysis includes evaluating measurement models for validity and reliability and testing hypotheses. The SEM-PLS analysis confirms that Work-Life Balance, Motivation, and Work Environment all have a positive and significant impact on employee performance. WLB showed the most dominant influence among the three factors. This research is an important factor that significantly affects employee performance. Maintaining and improving these factors, especially WLB, is essential for fostering employee motivation, a sense of security, and maximizing work output, thereby contributing to the overall success of the organization.

This research was conducted to analyze the process of providing social services for abandoned children at the Sayap Ibu Foundation. Abandoned children are seen as a group with a high level of vulnerability and therefore require special intervention in fulfilling basic rights, protection, and developing their personal capacity so they can develop optimally. The research method applies a qualitative approach that uses interview processes, observations, and documentation studies to obtain the required information. Research findings show that the services provided include aspects of protection, education, fulfillment of basic needs, and psychosocial development which are implemented in an integrated manner by professional staff and volunteers. In its implementation, this service still faces a number of obstacles, including limited human resources, infrastructure, and minimal support from the community, which has an impact on the suboptimal service. However, the Sayap Ibu Foundation still has a significant contribution in improving the welfare of abandoned children through various programs oriented towards social rehabilitation, character strengthening, and empowerment. Therefore, it can be concluded from this study that it is necessary to strengthen comprehensive and sustainable services, as well as closer collaboration between institutions, government and the community in order to increase the effectiveness of handling neglected children by utilizing the functions and roles of foundations to the maximum. Then, the implications of the results of this study can be used as consideration for policy makers and social actors in designing more effective service programs for neglected children.