Publication Search

This study aims to: (1) develop Prezi application-based learning media products on fantasy embroidery basic competencies (2) determine the feasibility of Prezi application-based learning media based on assessments from media and material experts (3) determine student responses to Prezi application-based learning media on competence basics of fantasy embroidery. The research was carried out in class XI Fashion Design at SMK Dharma Wanita Gresik. The type of research used was research and development. The development method chosen was Borg & Gall with 7 stages of development, namely data collection, planning, initial product format development, expert validation testing, revision of expert validation test results, limited field trials, revision and improvement of limited trial results. The data collection method uses a student response questionnaire, a validation test results questionnaire. Descriptive analysis techniques are used to process and analyze the results of student response questionnaires and validation questionnaires. The results of this study state that: (1) producing Prezi application-based Learning Media products on the basic competence of fantasy embroidery is good and feasible to use (2) the feasibility of Prezi application-based Learning Media products based on media experts' assessments gets a percentage of 93.75% included in the very feasible category , from material experts, an average percentage of 100% is included in the very feasible category (3) student responses to Prezi application-based learning media in the basic competence of fantasy embroidery get a percentage of 90.97% included in the very good category.

CV. XYZ is a manufacturing company whose main product is lightweight concrete bricks made in various sizes. Lightweight concrete brick with a thickness of 10 cm is the product that produces the highest defects compared to other products. The resulting defects have an average of 5% where this value exceeds the company's tolerance limit of 3-4%. Based on these problems, a study was conducted to determine the level of defects of lightweight concrete bricks and to provide suggestions for improvements to reduce defects. The research was conducted using the Seven Tools method and Failure Mode and Effect Analysis (FMEA). The results showed that the defect level of Lightweight Concrete Bricks from the highest to the lowest were chipped, cracked, uncut, and dimensional defects respectively. In addition, it can be seen that the Gompal failure mode with the cause of the disassembly or sorting process is too hard to produce the highest RPN score of 245, so that the recommendations for improvement need to be prioritized first.

Digital marketing can be a solution to solving problems that have been experienced by MSME actors, namely product marketing problems. Especially in Musir lor Village, Kec. Rejoso, Kab. Ngajuk, East Java Province, where there are several UMKM that have the potential to be developed to become more productive. However, the lack of understanding of digital marketing causes these UMKM to not develop further on a large scale. This is based on the results of observations and the implementation of location surveys in the village of Musir Lor which is a form of research method in the analysis of problems with Musir Lor UMKM owners, namely the lack of awareness of the residents of Musir Lor Village about the importance of Business Identification Numbers, as well as the lack of understanding in increasing business value. or the image of a product to support product quality improvement and increase the interest of potential consumers in an UMKM product. Some UMKM build businesses with minimal knowledge of UMKM business owners causing a lack of knowledge about product brands. Therefore, in branding or rebranding a product, it must be understood that an attractive, unique and easily recognized design is very important. Therefore, several alternative strategies that need to be considered in building a brand are logos that are appropriate to the line of business, banners and business stamps, more attractive and modern packaging designs. In this modern and technological era, it is certainly not far from operating digital applications that must be understood by UMKM business actors as a form of effort to increase the development of an UMKM, such as operating an online marketplace, social media and operating a financial management application to manage finances in a structured manner.

PT Kusuma Mulia Plasindo Infitex is a company engaged in the manufacturing sector that produces polypropylene and HD (Hight density Polyethylene) plastic products. The problem that occurred at PT Kusuma Mulia Plasindo Infitex was that the number of defective products on HD plastic products of 98,327 kg contained 4,194 kg of defective products. The purpose of this study is to determine the factors that cause defects and suggestions for improvements to minimize defective products. This study uses the six sigma method which is useful for finding the root causes of problems that are adjusted to the characteristics of the data they have. The 5 stages of six sigma are DMAIC(define, measure, analyze, improve, control) and kaizen is the Five M-Checklist. So from the results of data processing, the value is obtained in the form of DPMO 8393.048 and a sigma value of 2.49. Proposed improvements include providing training in plastic welding, providing additional 5-10 minute breaks and supervision while working. Perform routine machine maintenance every month and cleaning every day. Adding ventilation and blowers in the production room. Carry out the production process according to the existing SOP at the company, especially in mixing materials according to the SOP for raw materials that have been made by the company.

PT KMPI is an industrial company that produces textiles and plastics, including plastic products made of polypropylene (PP). The problem that occurs in PT Kusuma Mulia Plasindo Infitex is the quality of the products that still have defects, based on the results of the analysis in February 2023 with a total production of 76,596 kg there are rejects data of 4,695 kg and the percentage of product defects that occur is 6.1%. The objective of this study is to determine the predominant types of defects that influence the factors that cause defects. This study uses the seven tools method to find the root cause of the problem to be solved, as well as the Kaizen Five-M checklist and the Kaizen Five Step Plan to suggest improvements to the company. Based on the results of data processing, there are three types of defects, namely wrinkle defects with a percentage of 43% for a total defect of 2039 kg, medium wrinkle defects with a percentage of 45% for a total defect of 2094 kg, and thick-thin defects with a percentage of 12% for a total defect of 562 kg. From the fishbone diagram, it can be seen that the occurrence of defects is caused by several factors, namely people, materials, methods and machines. Suggested improvements using the Kaizen Five-M checklist analysis are training and monitoring of production, implementation of SOPs (Standard Operating Procedures) established by the company, such as dosing the mixture of plastic seeds with addictive substances at a ratio of 25 Kg. 1 oz. and Kaizen management control: 1 Ons and Kaizen five-step plan management controls, namely Seiri, Seiton, Seiso, Seiketsu, Shitsuke. This includes pre-job briefings and periodic assessments, and the establishment of standard operating procedures for the supervision of single-table melting machines with a melting temperature of 160-166oC.

This service aims to improve lecturer skill and comprehension of the application of instructional approaches in shaping the character of students at the Bandung College of Administrative Sciences in Cibeunying Kidul District, Bandung City. This dedication is motivated by the need for lecturers who are motivated to improve competency and who have the ability to use instructional tactics to shape students' character. The degree of the students' bad character and the lecturers' poor teaching techniques is the dull everyday instructional routine. This service took place on Thursday, June 3, 2023. Field surveys (locations), conversations, information collection, and lecturer observations were initially carried out in order to deliver this service. After that, teachers received training and help with regard to enhancing their competency as lecturers and putting character-development teaching methodologies into practise. The output objectives for this volunteer initiative include scientific publications, online content, YouTube activities, and photo documentation of PKM activities. It is common to use workshops, seminars, and question-and-answersessions. 

 The mentoring program for small business actors was initiated by the Ministry of Cooperatives and Small Medium Enterprises which aims to increase awareness and capabilities for business actors. On the other hand, the program can reduce the high rates of poverty, unemployment, and disparities between regions in Indonesia. Beginning with human resource improvement program activities as executors of activities. It is expected to be able to solve the problems of business actors from various aspects of capital, market, technology, and business governance. The method used in identifying all the problems faced by them as business actors are by using training methods that suit their needs, including entrepreneurship training, market-winning strategies, and mastery of effective and efficient technology and this training can be carried out continuously to increase the profitability company.

The objectives of this research are to: 1) determine the plan for maximising Gayo Takengon Campgrounds' tourist potential; and 2) provide management of the campgrounds' attractions with guidance. This study discusses the potential and how to create it using a sort of qualitative research and descriptive data analysis. The study's findings indicate that there is potential for development into a natural tourist attraction. These possibilities are: 1) As the Gayo Camping Ground develops as a tourism object, the promotion strategy is currently quite effective. For instance, the tourism office has promoted by providing promotional flyers and videos, which were then uploaded to social media, which is directly managed by the Gayo Camping Ground manager himself. The availability of this material on social media platforms like Instagram, Facebook, and YouTube makes it simpler for travellers to find out more about this tourist destination. 2) Based on the findings of this research, there aren't many improvements that need to be made to the Gayo Campground tourist attraction as all of its amenities already match the requirements for a tour.

The study was set to examine an interpretation of the philosophy of the course and to elevate it with a short story extrapolated value found in the mega best seller on the self-improvement volume volume entitled "Filosofi Teras" by Henry Manampiring. The study is a library study using qualitative descriptive methods. The data-gathering technique in this study is text-reading with the data-analysis techniques using the elective analysis techniques, that is, analyzing, connecting and summarizing the study of philosophy and extrapolic values contained in the short story. The data analysis techniques in this study are based on data selectively, that is, data reduction, data presentation, and deduction drawing. The urgency of research is for readers to understand, possess and implement the values contained in the short story book Filosofi Teras and extrinsic values.

The background of writing this research is the result of observations during PPL 1 PPG pre-service that students' literacy skills are still low, especially in students' critical reasoning skills and literacy independence. Alternative learning as a solution is the application of the Problem Based Learning learning model assisted by Energy Cards. The purpose of this study is to describe learning literacy design, analyze process and result improvements, and determine the impact of implementing the Energy Card-assisted Problem Based Learning model. Data collection is carried out by test, observation, and documentation techniques. This research is a qualitative approach by looking for various theoretical descriptions, findings and other research materials obtained from reference materials to be used as a basis for activities. This study resulted in the percentage of students' critical reasoning ability and literacy independence with an average score of 85.8% (very good). The average student learning outcomes on the posttest were higher than the pretest with an increase of 20. The conclusion of this study is the design of learning literacy using the Energy Card-assisted Problem Based Learning model, the application of the Energy Card-assisted Problem Based Learning model is effective in improving student learning literacy skills, this study has an impact on students, teachers and schools.

The background for writing this is that based on the results of observations in class IV SDN Jatisari found problems including low reading interest due to the lack of availability of varied teaching resources for students. Then the learning model is still conventional. To overcome these problems, teachers can use the Flashcard-assisted Problem Based Learning model which can attract and facilitate student understanding both visually and in writing. The purpose of writing this is to describe the design of learning literacy, test the improvement of processes and results and find out the impact of implementing Problem Based Learning assisted by Flashcard media for fourth grade students at SDN Jatisari. Data collection techniques using tests, observation and documentation. The results of the percentage of students' independent literacy abilities show an average score of 85.25% (good) and critical reasoning abilities show a score of 86% (very good). For Pretest and Posttest learning outcomes there is an average increase of 19. The conclusion of this best practice is the design of learning literacy using Problem Based Learning assisted by Flashcards. The application of the Problem Based Learning model assisted by Flashcards is effective for the literacy skills of fourth grade students at SDN Jatisari Semarang. besides that this has an impact on writers, students, teachers and schools.

The Office of the Airport Authority Region III is one of the government agencies that provide public services to the public, namely airport PAS services, therefore the Office of the Airport Authority Region III participates in the government program to build a good and clean government by designing the construction of an integrity zone towards a Serving Free Bureaucratic Area (WBBM) to improve the quality of its services. The purpose of this research is to determine the effectiveness of the WBBM predicate and the supporting and inhibiting factors in improving the quality of airport PAS services at the Office of the Airport Authority Region III. The research method used is mixed methods, which means combining quantitative and qualitative research simultaneously with the chosen strategy, namely sequential explanatory. The data sources obtained are primary and secondary data with the data collection techniques used are interviews, documentation, and direct observation at the Region III Airport Authority Office. The results of this study indicate that the WBBM predicate is effective in improving the quality of airport PAS services as evidenced by the SKM results which continue to increase from 2020 to 2022 and changes in the airport PAS service system to online services. Factors that support the improvement of the quality of airport PAS services are the six areas of change in WBBM and the existence of inhibiting factors, namely websites that have not been properly managed, human resources that have not provided excellent service, and lack of work ethic in providing services

 Performance appraisal is a way of determining the work results of employees and work groups that are useful if used the right methods on target and produce the desired conclusions according to output targets and performance standards. This research method is qualitative, namely observing performance appraisals that are already in effect with a combination of quantitative and qualitative methods. Quantitative by comparing work standards and output targets. Qualitative is assessed from skills (competence, physical abilities, coordination and teamwork); character (discipline, ability to make decisions and speed of response); and accuracy (supervision, control and the presence of work solutions).  Assessment data from January to April 2019. The time limit was chosen because the performance appraisal had stopped starting in August 2019, and required a remedial analysis. The results of the study show that performance appraisal provides an efficiency of 14% and makes assessments more noticed by all production employees. Methods collaborate in generating a more complete and mature assessment, as well as other suggestions for improvement. And prove that performance appraisal is useful for efficiency and effectiveness, controlling and monitoring performance, and being able to motivate employees to work even better.  

This community service activity aims to enhance the skills of the residents of Lekis Rejo Village, Lubuk Raja Subdistrict, through macrame craft training. The training was motivated by the community's need for alternative household economic improvement, especially in the post-pandemic period. The implementation method included planning, theoretical and practical training, monitoring, evaluation, and reporting. The results showed increased motivation and skills among participants in creating functional products such as pot hangers and mask connectors. Moreover, the training sparked entrepreneurial interest among the participants. Thus, this macrame training has proven to make a real contribution in fostering entrepreneurship and improving family income at the village level.

This research is an experimental research with pre-experiment method, this research design is the one group pretest posttest. This study aims to determine the effectiveness of the Student Team Achievement Division (STAD) learning model in identifying information and summarizing explanatory text. The samples in this study were VIII grade students. Based on the results of research and data analysis regarding the comparison of statistical values, the comparison of learning outcomes categories and the comparison of the level of completeness proves that the improvement of student learning outcomes can be seen from the data on student learning outcomes through descriptive statistical analysis before using the Student Team Achievement Division (STAD) learning model, the average student score is still below the KKM value, namely 49.57 and after using the Student Team Achievement Division (STAD) learning model, the average student score increases above the KKM, namely 84.21. It is known that the posttest value is 84.21 more than the Pretest value which is 49.57. Furthermore, based on the results of inferential statistical analysis using the t-test formula, it is known that the t_ (count) obtained is 4.371 with the frequency df = 14 -1 = 13, at a significant level of 0.05 or 5% the t_table is 1.770. So t_ (count) > t_table or H_0 rejected H_1 accepted. These results can be concluded that there is a significant increase in student learning outcomes. This means that the use of the Student Teams Achievement Division (STAD) learning model is effective in learning to identify information and summarize explanatory texts in class VIII students of SMP Muhammadiyah 10 Makassar.      

The quality of hospital services will affect patient satisfaction and also their loyalty in using these facilities and the rapid development of health services currently requires hospital managers to run their business well. in the hospital. This study uses the method of literature review (literature review) with search engines used in literature searches including Google Scholar and Research gate with the keywords Service Quality Improvement, Lean Six Sigma, Hospitals. The resulting articles were selected based on publications published between 2018 and 2023. The results showed that the application of lean six sigma in hospitals in improving the quality of their services can be carried out through the DMAIC (Define, Measure, Analyze, Improve, Control) approach. The conclusions of this study indicate that the application of lean six sigma can reduce difficulties, increase speed, and separate activities that have added value or value added from activities that have no added value or non-value added in hospitals, such as improving service quality by setting priorities by according to the highest gap required by the patient.

This increase is very important for a country, especially for a developing country like Indonesia. Along with continuous improvement, progress is characterized as a conscious effort by the state. One of the things that is very important in the progress of a nation is its workers, that in the rapid progress of a country, it is the workers who start. That departing from this, the government is an important part in winning progress in the business sector as well as for the national development program which must be endeavored to open up as many jobs as possible from various layers of trade that are able to balance the increase in quality and increase in security for the workforce which can become a must. Whereas Article 27 Paragraph (2) of the 1945 Constitution of the Republic of Indonesia states that "Every citizen has the right to work and a life worthy of humanity". This research is descriptive in nature which aims to collect data as thoroughly as possible that can accurately describe the legal protection of casual daily workers. The type of research used by the authors uses the type of empirical normative legal research. With library and field research data collection techniques. Problems that arise in the use of legal guarantees for precarious workers/laborers are the factors contained in the components of labor instructions, the labor economy as a result of not partnering with trade unions, and based on variables from employers/companies that have not been maximized in implementing legal security in understanding of the labor inspection in force in Indonesia and elements from the government's point of view that are lacking in providing outreach, supervision and firm action against companies that are naughty in running their business which can harm casual daily workers.

A manufacturing company engaged in the furniture industry, specializing in wood, rattan and glass products. Most of the production orders were related to table products, stands and chests, with a total of 15,224 orders for other products. Based on results of direct observation at PT. Romi Violeta from the production process department says that due to the limited working hours, especially as the production orders for tables, shelves, etc. increase every month, the physical and mental strain employees take to meet their production targets. I often complain about. For commodity products. The purpose of the research is to find cases of high physical and mental stress at manufacturing sites with high stress standards such as tables, shelves, and chests of drawers, and to provide suggestions for improving the reduction of physical and mental stress. . Based on an analysis of the results, the mean cardiovascular load (CVL) percentage was found to be 43.902%, indicating that the assessment needs improvement, and the Bourdon Vielsma test speed result was 12.593 seconds with a score of 7. , a body weight score (WS) of 11.5 is included in the adequate group (C). Accuracy is 3.26, score is 8, fair group (CB) weighted score (WS) is 12, constant is 8.185 seconds, score is 5.5, score is . 8 are in the suspicious (R) group.

One of them is economics in Islam and aims to make people's lives better. The human welfare expressed in the Qur'an alludes to human misery and happiness in this world and in the hereafter. Improvement can be achieved if part of financial independence is considered and good financial management can be recognized in real terms because it creates financial freedom. This exam uses subjective exploration with the help of written research. The consequence of this review, Government Assistance in an Islamic Perspective, is linked to the goals of Islam, particularly the implementation and support of the five basic standards of Maqasid Sharia, all of which lead to a better and just life in this world and the world.    

Education and training have a strategic role in improving the quality of human resources, namely civil servants who are professional both in terms of competence, attitude and expected behavior in accordance with their respective duties and roles. The objectives of education and training have an influence on employee performance, this can be seen from the objectives of the training which are in line with performance measurement indicators. The purpose of this theoretical review is to find out how the functions and roles of education and training affect the improvement of employee performance skills in companies. The method used is a theoretical review by analyzing and comparing existing theories. The results of this theoretical review are in carrying out the roles and functions of education and training to improve employee performance skills by increasing human resources, advancing science and technology, and increasing the quality development of company quality. It can be concluded that the role and function of education and training is an activity of a company that intends to be able to improve and develop attitudes, behavior, skills and knowledge of employees in accordance with the wishes of the company in improving employee performance. For agencies or companies, it is also necessary to encourage the development of the basic capabilities of existing employees. The education and training carried out by the company is beneficial for the company, employees, and improves performance and performance in good quality.