Analisa Tingkat Kecacatan Bata Beton Ringan Dengan Metode Seven Tools dan FMEA Di CV. XYZ - Mojokerto

Nur Rohkma ; Ais ; Enny Aryanny
Jurnal Kendali Teknik dan Sains 📅 2023 Vol 1, No 3 🔗 DOI: 10.59581/jkts-widyakarya.v1i3.542
Abstract
CV. XYZ is a manufacturing company whose main product is lightweight concrete bricks made in various sizes. Lightweight concrete brick with a thickness of 10 cm is the product that produces the highest defects compared to other products. The resulting defects have an average of 5% where this value exceeds the company's tolerance limit of 3-4%. Based on these problems, a study was conducted to determine the level of defects of lightweight concrete bricks and to provide suggestions for improvements to reduce defects. The research was conducted using the Seven Tools method and Failure Mode and Effect Analysis (FMEA). The results showed that the defect level of Lightweight Concrete Bricks from the highest to the lowest were chipped, cracked, uncut, and dimensional defects respectively. In addition, it can be seen that the Gompal failure mode with the cause of the disassembly or sorting process is too hard to produce the highest RPN score of 245, so that the recommendations for improvement need to be prioritized first.
Keywords
Bata Beton Ringan; FMEA; Kecacatan; Kualitas; Seven Tools
How to Cite

Nur Rohkma, et al. (2023). Analisa Tingkat Kecacatan Bata Beton Ringan Dengan Metode Seven Tools dan FMEA Di CV. XYZ - Mojokerto. Jurnal Kendali Teknik dan Sains, 1(3). https://doi.org/10.59581/jkts-widyakarya.v1i3.542

Nur Rohkma, Ais; Enny Aryanny, "Analisa Tingkat Kecacatan Bata Beton Ringan Dengan Metode Seven Tools dan FMEA Di CV. XYZ - Mojokerto," Jurnal Kendali Teknik dan Sains, vol. 1, no. 3, 2023.

Nur Rohkma, Ais; Enny Aryanny. "Analisa Tingkat Kecacatan Bata Beton Ringan Dengan Metode Seven Tools dan FMEA Di CV. XYZ - Mojokerto." Jurnal Kendali Teknik dan Sains, vol. 1, no. 3, 2023.

Nur Rohkma, Ais; Enny Aryanny. "Analisa Tingkat Kecacatan Bata Beton Ringan Dengan Metode Seven Tools dan FMEA Di CV. XYZ - Mojokerto." Jurnal Kendali Teknik dan Sains 1, no. 3 (2023).

Nur Rohkma, et al. (2023) 'Analisa Tingkat Kecacatan Bata Beton Ringan Dengan Metode Seven Tools dan FMEA Di CV. XYZ - Mojokerto', Jurnal Kendali Teknik dan Sains, 1(3). doi: 10.59581/jkts-widyakarya.v1i3.542.

Nur Rohkma, Ais; Enny Aryanny. Analisa Tingkat Kecacatan Bata Beton Ringan Dengan Metode Seven Tools dan FMEA Di CV. XYZ - Mojokerto. Jurnal Kendali Teknik dan Sains. 2023;1(3).

Artikel Terkait

Penggunaan Buzzer pada Modul GPS Teltonika FMB910 sebagai Indikator Kecepatan di PT Lacak Cipta Aktual

Aldi Bragi Muslim; Mohammad Fatkhurrokhman

Hubungan Minat Kejuruan dengan Kesiapan Memasuki Dunia Kerja Siswa Teknik Kendaraan Ringan Otomotif (Tkro) Smk Negeri 2 Sungai Penuh

M. Hifzon Fadhlika; Hasan Maksum; Irma Yulia Basri; Rifdarmon Rifdarmon

Analisa Penerapan Algoritma Keccak untuk Keamanan Permintaan API

Sofyan Noor Arief; Arief Prasetyo; Thariq Alfa Benriska

Identifikasi Penyakit Lambung Menggunakan Metode Case Based Reasoning Berbasis WEB

Surya Aulia Rahman. S; Ayu Prima Siska; Mardhotillah Mardhotillah

Studi Kasus Integrasi Current Transformer (CT) dan EOCR untuk Pengamanan Arus pada Panel Cooling Tower Pump di PT DongJin Indonesia

Muhammad Dicky Saputra; Mohammad Fatkurrokhman

Analisis Sentimen Publik TikTok dengan Pendekatan Lexicon-Based: Studi Kasus Timnas Indonesia di Piala Dunia 2026

Hamzah Nurrifqi Fakhri Fikrillah; Galih Pratama Herawan Putra; Fikri Chairul Ummam
Tren Sitasi Jurnal