Design of Tapperless Type Horizontal Axis Wind Turbine (Hawt) Blades using Mahogany Wood Material

Agung Dwi Sapto ; Sandy Suryady
IJAETech: International Journal of Advanced Engine... 📅 2025 Vol 1, No 1 🔗 DOI: 10.63956/ijaetech.v1i1.5
Abstract
Indonesia has quite large wind energy resources spread across various regions, so it has the potential to be developed into PLTB. Energy needs in Indonesia continue to increase and the government is committed to utilizing new, renewable energy to achieve emission reduction targets. However, efforts to utilize wind energy are still not optimal due to several reasons, especially research and research capabilities related to PLTB. The blade is the main component in the wind turbine system and is the system that first receives the wind and then converts it into mechanical energy. This research aims to determine the performance and manufacture tapperless type wind turbine blades with NREL's S822 airfoil using Qblade and Solidworks software. The design and simulation results show that the resulting blade has a blade radius of 1 meter, a blade or chord width of 0.12 m. The twist angle from the base to the tip of the blade ranges from 11.69º to 5.05º and a power of 500 W is obtained at a rotational speed of 262 rpm.
Keywords
Wind Blade Tapperless Airfoil Qblade Solidworks
How to Cite

Agung Dwi Sapto & Sandy Suryady (2025). Design of Tapperless Type Horizontal Axis Wind Turbine (Hawt) Blades using Mahogany Wood Material. IJAETech: International Journal of Advanced Engineering and Technology, 1(1). https://doi.org/10.63956/ijaetech.v1i1.5

Agung Dwi Sapto; Sandy Suryady, "Design of Tapperless Type Horizontal Axis Wind Turbine (Hawt) Blades using Mahogany Wood Material," IJAETech: International Journal of Advanced Engineering and Technology, vol. 1, no. 1, 2025.

Agung Dwi Sapto; Sandy Suryady. "Design of Tapperless Type Horizontal Axis Wind Turbine (Hawt) Blades using Mahogany Wood Material." IJAETech: International Journal of Advanced Engineering and Technology, vol. 1, no. 1, 2025.

Agung Dwi Sapto; Sandy Suryady. "Design of Tapperless Type Horizontal Axis Wind Turbine (Hawt) Blades using Mahogany Wood Material." IJAETech: International Journal of Advanced Engineering and Technology 1, no. 1 (2025).

Agung Dwi Sapto & Sandy Suryady (2025) 'Design of Tapperless Type Horizontal Axis Wind Turbine (Hawt) Blades using Mahogany Wood Material', IJAETech: International Journal of Advanced Engineering and Technology, 1(1). doi: 10.63956/ijaetech.v1i1.5.

Agung Dwi Sapto; Sandy Suryady. Design of Tapperless Type Horizontal Axis Wind Turbine (Hawt) Blades using Mahogany Wood Material. IJAETech: International Journal of Advanced Engineering and Technology. 2025;1(1).

Artikel Terkait

Service Quality Analysis to Improve Driving Customer Satisfaction using Servqual and IPA Methods

Putra, Rayhan Farras Wibawa; Haq, Ainul; Nasution, Syarifuddin; Puspitasari, Riris Lindiawati

Design and Implementation of a Solar Panel-Based Battery Charging System with Protection and Voltage Limiting Circuits

Wibowo, Kunto; Karjadi, M

Quality Control Analysis of the Carbonated Beverage Filling Process Using an Automated Filler Machine

Muhammad Yusuf Nurfani

Adaptive Reuse of Jengki House into a Communal Café: A Case Study of Seven Speed Coffee

Putri, Tamima Rizka; Rakhmanita, Rakhmanita; Astuti, Dewi; Dini, Sumaiyah Fitrian

Fiberglass Reinforced Plastic (FRP) Septic Tank as a Modern Alternative: A Comparative Study with Conventional Septic Tank

Ikhsan Kamandanu; Nanang Ruhyat

Comparative Analysis of Feed Water Temperature Before and After the Economizer on the Efficiency of a 240 Ton/Hour CFB Boiler

Faizal, Faizal; Nanang Ruhyat
Tren Sitasi Jurnal