DESAIN DAN ANALSIS RANGKA PADA MESIN PENGUPAS BIJI KOPI BASAH MENGGUNAKAN SOFTWARE SOLIDWORKS

Eko Aprianto Nugroho ; Abdul Rahman Agung Ramadhan
Jurnal Teknik dan Science (JTS) 📅 2023 Vol 2, No 2 🔗 DOI: 10.56127/jts.v2i2.762
Abstract
Coffee is a commodity that is currently developing. However, many coffee farmers in remote areas experience problems in increasing their business along with high market demand due to a lack of business support tools. The purpose of this paper is to find out the materials used in designing a wet coffee bean peeler machine. Design the frame of a wet coffee bean peeler machine using Solidwork software. Wet coffee bean peeler analysis. The type of iron to be used in the frame of this wet coffee bean peeler is galvanized angle iron with a size of 22 x 22 x 1.8 mm. The results obtained show that the von misses stress calculated using solidworks has the greatest stress of 69,654 Mpa. For von misses stress by manual calculation, a value of 71.707Mpa is obtained. The results obtained show that the displacement calculated using solidworks has the greatest stress of 0.293 mm. For displacement with manual calculations, a value of 0.163 mm is obtained. The results obtained show that the Factor of Safety value calculated using Solidworks has the greatest stress of 2,928 ul. For the Factor of Safety with manual calculations, a value of 2,830 ul was obtained.
Keywords
Frame Von misses Displacement Factor of Safety
How to Cite

Eko Aprianto Nugroho & Abdul Rahman Agung Ramadhan (2023). DESAIN DAN ANALSIS RANGKA PADA MESIN PENGUPAS BIJI KOPI BASAH MENGGUNAKAN SOFTWARE SOLIDWORKS. Jurnal Teknik dan Science (JTS), 2(2). https://doi.org/10.56127/jts.v2i2.762

Eko Aprianto Nugroho; Abdul Rahman Agung Ramadhan, "DESAIN DAN ANALSIS RANGKA PADA MESIN PENGUPAS BIJI KOPI BASAH MENGGUNAKAN SOFTWARE SOLIDWORKS," Jurnal Teknik dan Science (JTS), vol. 2, no. 2, 2023.

Eko Aprianto Nugroho; Abdul Rahman Agung Ramadhan. "DESAIN DAN ANALSIS RANGKA PADA MESIN PENGUPAS BIJI KOPI BASAH MENGGUNAKAN SOFTWARE SOLIDWORKS." Jurnal Teknik dan Science (JTS), vol. 2, no. 2, 2023.

Eko Aprianto Nugroho; Abdul Rahman Agung Ramadhan. "DESAIN DAN ANALSIS RANGKA PADA MESIN PENGUPAS BIJI KOPI BASAH MENGGUNAKAN SOFTWARE SOLIDWORKS." Jurnal Teknik dan Science (JTS) 2, no. 2 (2023).

Eko Aprianto Nugroho & Abdul Rahman Agung Ramadhan (2023) 'DESAIN DAN ANALSIS RANGKA PADA MESIN PENGUPAS BIJI KOPI BASAH MENGGUNAKAN SOFTWARE SOLIDWORKS', Jurnal Teknik dan Science (JTS), 2(2). doi: 10.56127/jts.v2i2.762.

Eko Aprianto Nugroho; Abdul Rahman Agung Ramadhan. DESAIN DAN ANALSIS RANGKA PADA MESIN PENGUPAS BIJI KOPI BASAH MENGGUNAKAN SOFTWARE SOLIDWORKS. Jurnal Teknik dan Science (JTS). 2023;2(2).

Artikel Terkait

Analisis Kekuatan Struktur pada Kondisi Lifting dengan menggunakan Dua Crane (Studi Kasus: Module Gas Compressor Project FPSO Marline Natuna, Batam)

Edi Junaedi; Agita Kabdiyono, Era

The Effect of Coal Ash As a Sand Substitute on The Compressive Strength of Concrete

Agita Kabdiyono, Era; Luthfi Hanafi

Proses Produksi Piring Porcelain Tipe KP24C Dengan Mesin Automatic Ceramic Machine (ACM) di PT. Kedaung Oriental Porcelain Industry (KOPIN)

Eko Aprianto Nugroho; Sandy Suryady; Ahmad Sutarno

Optimasi Hyperparameter Random Forest menggunakan Bayesian Optimization Untuk Prediksi Kelulusan Mahasiswa

Ana Vivtia Setyawan; Indra Adi Permana

Identifikasi Pesan Penipuan Berkedok Hadiah Digital Menggunakan Machine Learning

Muhammad Shafari Rahmat; Syahrizal Andhika

Perencanaan Perkerasan Kaku (Rigid Pavement) Menggunakan Metode AASHTO 1993 Pada Ruas Jalan Randublatung-Kedungtuban Kabupaten Blora

Refki Khoirul Safitri; Teguh Yuono; Kukuh Kurniawan Dwi Sungkono
Tren Sitasi Jurnal