Klaim Artikel Anda
Verifikasi kepemilikan artikel akademik
Apakah artikel-artikel ini milik Anda?
Daftarkan diri Anda sebagai author untuk mengklaim artikel dan dapatkan profil akademik terverifikasi dengan fitur lengkap.
Badge Verifikasi
Profil terverifikasi resmi
Statistik Lengkap
H-index, sitasi, dan metrik
Visibilitas Tinggi
Tampil di direktori author
Kelola Publikasi
Dashboard artikel terpadu
Langkah-langkah Klaim Artikel:
- 1. Daftar akun author dengan email akademik Anda
- 2. Verifikasi email dan lengkapi profil
- 3. Login dan buka menu "Klaim Artikel"
- 4. Cari dan klaim artikel Anda
- 5. Tunggu verifikasi dari admin (1-3 hari kerja)
Menampilkan 1–10 dari 166 artikel
Analisis Keselamatan dan Kesehatan Kerja (K3) Menggunakan Metode Job Safety Analysis (JSA) dan Hazard and Operability Study (HAZOPS) pada Departemen SDM PT. Micro Madani Institute Cabang Solo
Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika
Vol 4
, No 2
(2026)
Occupational Safety and Health (K3) is an important aspect in protecting workers from potential accidents and health problems arising from work activities, including in the administrative sector, which is often considered low-risk. However, the Human Resources (HR) Department at PT Micro Madani Institute (MMI) Solo Branch still found several potential hazards and work risks that have not been optimally identified. This study aims to apply the Hazard and Operability Study (HAZOPS) and Job Safety...
Sumber Asli
Google Scholar
DOI
Pengukuran Beban Kerja Fisik dan Beban Kerja Mental Karyawan Divisi Pertenunan Menggunakan Metode % Cardiovascular Load (% CVL) dan NASA-TLX di PT XYZ
Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika
Vol 4
, No 2
(2026)
Low productivity and high sick leave in the weaving division of PT XYZ in Yogyakarta are caused by excessive physical and mental workload on Shuttle Loom Unit 2 operators. The productivity of the weaving division of PT XYZ was recorded at only 61.96% (target 75%) with sick leave of 4.17%, indicating operator fatigue. This study measured physical workload using the Cardiovascular Load (CVL) method based on heart rate and mental workload using NASA-TLX, and analyzed the correlation with age and le...
Sumber Asli
Google Scholar
DOI
Perumusan Blue Ocean Strategy dengan Metode SWOT pada Batik Atina Solo
Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer
Vol 4
, No 1
(2026)
This study aims to formulate a Blue Ocean Strategy to enhance business competitiveness through a SWOT analysis approach. The research was conducted using a descriptive qualitative method. Primary data were obtained through interviews with competent parties to identify the internal and external factors of the business, while questionnaires were used as supporting data to capture respondents’ perceptions of the identified factors. The interview results served as the basis for developing the IFAS a...
Sumber Asli
Google Scholar
DOI
Studi Pengaruh Derajat Kejenuhan Terhadap Kuat Geser Tanah
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 4
, No 1
(2026)
Soil strength characteristics are strongly influenced by its physical and mechanical properties, one of which is shear strength. Soil shear strength is affected by cohesion (c), internal friction angle (ϕ), and soil moisture conditions. In open-pit mining conditions, soil moisture content is greatly influenced by rainfall and water seepage, which can increase the degree of saturation within the soil mass. An increase in the degree of saturation generally leads to a rise in pore water pressure, t...
Sumber Asli
Google Scholar
DOI
Analisis Karakteristik Tanah Berdasarkan Uji Lapangan Sondir (Cone Penetration Test) & Uji Laboratorium pada PIT North PT Karya Putra Borneo
Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan
Vol 4
, No 1
(2026)
This study aims to analyze the characteristics of the soil at PIT North with two highwall and lowwall locations at PT Karya Putra Borneo, Kutai Kartanegara Regency, East Kalimantan Province. The research method was carried out by collecting primary data from the results of field tests using the sondir method with the Cone Penetration Test(CPT) tool and laboratory tests using physical properties, specific gravity, grain size, soil consistency, and consolidation tests, as well as secondary data fr...
Sumber Asli
Google Scholar
DOI
Perancangan Ulang Tata Letak Gudang Bahan Baku di PT. XYZ dengan Metode Class Based Storage
Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer
Vol 4
, No 1
(2026)
This study aims to redesign the raw material yarn warehouse layout at PT. XYZ using the Class Based Storage method to improve storage and retrieval efficiency. The main problem identified in the warehouse is random item placement, resulting in relatively long retrieval times of approximately 10–15 minutes per pallet. This research applies a descriptive quantitative approach using a case study method. The data used consists of inbound, outbound, and inventory records of yarn raw materials from No...
Sumber Asli
Google Scholar
DOI
Perancangan Ulang Tata Letak Gudang Bahan Baku di PT. XYZ dengan Metode Class Based Storage
Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer
Vol 4
, No 1
(2026)
This study aims to redesign the raw material yarn warehouse layout at PT. XYZ using the Class Based Storage method to improve storage and retrieval efficiency. The main problem identified in the warehouse is random item placement, resulting in relatively long retrieval times of approximately 10–15 minutes per pallet. This research applies a descriptive quantitative approach using a case study method. The data used consists of inbound, outbound, and inventory records of yarn raw materials from No...
Sumber Asli
Google Scholar
DOI
Analisis Pergerakan Lereng Tambang Menggunakan Alat CHCNAV PS 2000 di PT Insani Bara Perkasa Kabupaten Kutai Kartanegara Provinsi Kalimantan Timur
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 4
, No 1
(2026)
Mine slopes play a crucial role in ensuring the safety and sustainability of mining activities. Continuous mining operations can alter slope conditions, thereby increasing the potential for instability and slope failures. Slope stability is influenced by the balance between resisting forces and driving forces acting on the rock mass. When the resisting forces are smaller than the driving forces, the slope becomes unstable and failure may occur. Therefore, slope stability analysis is essential to...
Sumber Asli
Google Scholar
DOI
Merespons Hoaks dan Disinformasi: Literasi Digital sebagai Bagian dari Amar Ma’ruf Nahi Munkar
Vol 3
, No 1
(2026)
The rapid spread of hoaxes and disinformation in the digital era poses serious challenges to social cohesion, societal stability, and the internalization of moral values, particularly within Muslim communities. The circulation of unverified information has the potential to trigger conflict, polarization, and a decline in public trust. This study aims to explore digital literacy as an ethical and religious instrument in actualizing the Islamic principle of amar ma’ruf nahi munkar in the contempor...
Sumber Asli
Google Scholar
DOI
Perencanaan Counterweight untuk Meningkatkan Kestabilan Lereng dan Kapasitas Disposal pada Area Disposal T4 PT Unggul Dinamika Utama Provinsi Kalimantan Timur
Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan
Vol 4
, No 1
(2026)
The stability of disposal slopes is a critical aspect of open-pit mining operations because it directly affects operational safety and the continuity of overburden dumping activities. Disposal areas composed of overburden materials generally exhibit heterogeneous characteristics, particularly when soft materials such as mud are present, which can significantly reduce slope stability. Therefore, a comprehensive slope stability evaluation is required prior to further disposal development. This stu...
Sumber Asli
Google Scholar
DOI