Klaim Artikel Anda
Verifikasi kepemilikan artikel akademik
Apakah artikel-artikel ini milik Anda?
Daftarkan diri Anda sebagai author untuk mengklaim artikel dan dapatkan profil akademik terverifikasi dengan fitur lengkap.
Badge Verifikasi
Profil terverifikasi resmi
Statistik Lengkap
H-index, sitasi, dan metrik
Visibilitas Tinggi
Tampil di direktori author
Kelola Publikasi
Dashboard artikel terpadu
Langkah-langkah Klaim Artikel:
- 1. Daftar akun author dengan email akademik Anda
- 2. Verifikasi email dan lengkapi profil
- 3. Login dan buka menu "Klaim Artikel"
- 4. Cari dan klaim artikel Anda
- 5. Tunggu verifikasi dari admin (1-3 hari kerja)
Menampilkan 1–10 dari 11 artikel
Pengembangan Desain Alat Pirolisis Tipe Fast Pyrolysis dengan Reaktor Screw Bertingkat untuk Pengolahan Kulit Kopi
Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer
Vol 4
, No 1
(2026)
Pyrolysis is a biomass conversion method into fuel through heating at high temperatures under oxygen-limited conditions. The main factors influencing the pyrolysis process include temperature, residence time, pressure, particle size, reactor design, and the type of pyrolysis employed. This study aims to design an auger-type fast pyrolysis system based on previous research. The design and modeling of the fast pyrolysis equipment were carried out using Autodesk Inventor 2021 software. Based on the...
Sumber Asli
Google Scholar
DOI
Desain Rekayasa dan Analisis Struktur Tabung Plastic Melter Menggunakan Simulasi FEA
Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer
Vol 4
, No 1
(2026)
Plastic waste has become one of the main environmental problems due to its nature, which is difficult to decompose naturally and can cause environmental pollution. One alternative waste treatment method that can be applied is to use a plastic melter to melt and recycle plastic waste into useful products. However, the design of plastic melters often lacks consideration of structural strength and safety aspects during the operation process. This study aims to design and engineer a plastic melter u...
Sumber Asli
Google Scholar
DOI
Simulasi CFD Berbasis Single Particle pada Proses Fast Pyrolysis Biomassa Kulit Kopi Menggunakan Reaktor Screw untuk Optimasi Produksi Gas
Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer
Vol 4
, No 1
(2026)
Coffee husk is an agro-industrial waste with significant potential to be utilized as a renewable energy source through the fast pyrolysis process. This study aims to analyze and optimize gas production from the fast pyrolysis of coffee husk biomass using a screw reactor through single-particle-based Computational Fluid Dynamics (CFD) simulations. The simulations were conducted by varying the operating temperature at 500°C, 600°C, and 700°C to examine pressure distribution, heat transfer, particl...
Sumber Asli
Google Scholar
DOI
Analisis Karakteristik Karbon Aktif Hasil Pirolisis Kulitkopi Robusta sebagai Karbon Pendukung Katalis PEMFC (Proton Exchange Membrane Fuel Cell)
Muhammad Taufiqurahman
; Pebi Riyanto
; Rany Puspita D
; Raka Mahendra S
; Arif Rahman S
; M. Fendy Kussuma H. S
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 4
, No 1
(2026)
Proton Exchange Membrane Fuel Cells (PEMFCs) are increasingly developed due to their high efficiency, power density, durability, and environmental friendliness. However, the high cost of platinum catalysts limits their widespread application. Reducing platinum usage through the development of low-cost catalyst support materials is a promising approach. Activated carbon derived from biomass offers a sustainable and economical alternative, particularly when utilizing agricultural waste such as cof...
Sumber Asli
Google Scholar
DOI
Pengaruh Variasi Temperatur Proses Pirolisis terhadap Karakteristik Biopelet Berbahan Baku Arang Limbah Ampas Tebu dan Kulit Kopi
Venus: Jurnal Publikasi Rumpun Ilmu Teknik
Vol 3
, No 6
(2025)
Increasing in energy demand and limited fossil fuel reserves have driven the use of environmentally friendly alternative energy sources. This study aims to analyze the effect of pyrolysis temperature variations on the quality of biopellets made from bagasse and coffee husks. The materials were prepared in a 50:50 ratio with the addition of 15% tapioca flour as a binder. The pyrolysis process was carried out at temperatures of 450°C, 500°C, and 550°C for 120 minutes in oxygen-free conditions. The...
Sumber Asli
Google Scholar
DOI
Desain Rekayasa dan Analisis FEA Mesin Depackaging Sampah Tipe Hammer Mill
Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer
Vol 3
, No 6
(2025)
Management of household waste in Final Disposal Sites (TPA) faces a serious problem, where most of the waste accumulates and is difficult to decompose due to its complex nature. This condition substantially inhibits natural decomposition processes and limits the effectiveness of recycling efforts. Pre-processing operations, such as sorting and crushing, which are still dominated by manual methods, are proven to be inefficient, high-risk, and require large allocations of land resources and manpow...
Sumber Asli
Google Scholar
DOI
Desain Rekayasa dan Analisis FEA Indirect Rotary Dryer untuk Pengeringan Bahan Baku Refuse Derived Fuel
Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer
Vol 3
, No 5
(2025)
Salah satu bentuk pengolahan limbah menjadi energi yang berasal dari limbah padat perkotaan adalah sampah bahan bakar turunan atau Refuse Derived Fuel (RDF). Terdapat berbagai teknologi pengeringan yang biasanya digunakan untuk pengeringan RDF. Contoh penerapannya adalah oil tube rotary dryer sebagai alternatif dari steam tube rotary dryer karena sejumlah alasan utama. Pertama, penggunaan oil engine sebagai material penghantar panas tidak membutuhkan tekanan tinggi seperti pada steam tube rotary...
Sumber Asli
Google Scholar
DOI
Simulasi CFD Pengeringan Maggot dengan Microwave Oven Berbasis Software Comsol Multiphysics
Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika
Vol 3
, No 5
(2025)
Black Soldier Fly (BSF) larvae, or maggots, are a type of insect currently widely cultivated, primarily for animal feed. This is because BSF larvae contain essential nutrients such as fat and protein in high amounts, thus improving the nutritional quality of livestock that consume them. Therefore, the processing and preservation of maggots is crucial to maintain their nutritional content and extend their shelf life. One method used in maggot processing is drying. Drying aims to reduce the water...
Sumber Asli
Google Scholar
DOI
Desain Rekayasa dan Analisis Fea Alat Pengering Maggot Tipe Microwave Conveyor
Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer
Vol 3
, No 4
(2025)
One method of drying Black Soldier Fly (BSF) larvae that can be applied is drying using a continuous microwave oven. This tool utilizes microwaves emitted to evaporate water. In addition, the use of a conveyor that runs on a microwave oven as a medium or place to place BSF larvae is expected to simplify the production process. This study was conducted to determine the design and strength analysis of the thermal structure of a continuous microwave oven-type BSF larva dryer using Solidworks softwa...
Sumber Asli
Google Scholar
DOI
Rancangan Optimal Oven Microwave untuk Peningkatan Efisiensi Pengeringan Maggot Menggunakan Simulasi CFD
Mars: Jurnal Teknik Mesin, Industri, Elektro Dan Ilmu Komputer
Vol 3
, No 3
(2025)
Maggots are larvae of the Black Soldier Fly (BSF) which have benefits as waste decomposers and have high potential as feed ingredients. This study aims to analyze the effect of power and time on maggot drying using microwaves. Using the Computational Fluids Dynamics (CFD) method on microwave heating with a power of 2000 watts and 2500 watts, and a residence time of 10 minutes, 20 minutes, and 30 minutes, then the final maggot temperature was tested. The results showed that the final temperature...
Sumber Asli
Google Scholar
DOI