Publication Search

Helminthiasis can be diagnosed by finding helminth eggs on a stool laboratory examination. Stool examination consists of qualitative and quantitative examination. One of the methods used in qualitative examination is the sedimentation method, this method utilizes the force of gravity by using a solution of lower density so that parasites can settle under the solution with the help of a centrifuge. One of the factors that affect centrifugation is time and speed. This study aims to determine the effect of time and speed of centrifugation on the profile of helminths eggs. The research was conducted at the meids laboratory of the Catholic Polytechnic Mangunwijaya Semarang. This type of research is experimental. Positive samples of Soil Transmitted Helminths (STH) eggs were centrifuged with time variations of 10 minutes, 5 minutes and 3 minutes at speeds of 3000 rpm, 2000 rpm and 1500 rpm. The data were then analyzed using Shapiro-wilk and Paired Samples T-test. Statistic test shows a difference of STH eggs profile between 3000 rpm 10 minutes and 2000 rpm 5 & 10 minutes, and 3000 rpm 3 & 5 minutes, between 2000 rpm 3 minutes and 1500 rpm 5 minutes, between 2000 rpm 10 minutes and 1500 rpm 5 minutes dan 200 rpm 3 minutes, between 3000 rpm 5 minutes and 2000 rpm 3 minutes (p < 0.05). There is an effect of variations in time and speed of centrifugation on the profile of STH eggs.

Implementing a box culvert system on bridges is an economical choice due to the reduced material use. This system has a joint that blends between the slab and the abutment walls and pillars. With a stiffer joint, the moment that occurs is smaller than a simple beam system. Box culvert foundations are commonly shallow foundations. Consequently, it is vulnerable to settlement, particularly the abutments that receive soil loads from the bridge embankment. Therefore, making the displacement in the abutments greater than in the pillars. The existing box culvert structure at the study site in Semarang, Indonesia has a span of 2 x 15 meters. Reinforcement has been previously carried out using Carbon Fiber Reinforced Polymer (CFRP) to treat cracks. Though, as time passed, the treated cracks reopened and new cracks developed. Structural cracks occur at a negative moment, so that the reinforcement yielded. A reinforcement using CFRP does not increase stiffness—thus, a reinforcement with adding external reinforcement system is used. This reinforcement is done by adding 400 x 200 WF profile—connected mechanically by attaching anchors to the slab. Reinforcement with a WF profile is safer due to its mechanical system, which makes it easier to implement and monitor.  

This study aims to describe the current and preferred organizational culture profile of PT Eddy Transport Raya based on the perceptions of all employees. The sampling method in this study is included in the type of saturated sample, where all the population numbers are samples. The total population in this study was 33 consisting of all employees of PT Eddy Transport Raya, so there were 33 people to be used as samples for research data collection. Primary data collection was carried out by distributing OCAI (Organizational Culture Assessment Instrument) questionnaires to all employees. The variable in this study is organizational culture with 4 indicators indicator or type of culture namely Clan, Adhocracy, Market and Hierarchy. The results of these 4 indicators provide an understanding of the organizational culture of the company. Thus it can help leaders in terms of communication and decision making within the company. In this study, employees have the perception that the current organizational culture of PT Eddy Transport Raya is more towards clan culture. In addition, employees have the desire to change and improve the organizational culture to become adhocracy.

With the choice of tourists increasing and giving each other the concept of trust, with almost similar values, this makes tourists more curious and confused. The influence of quality, quality, price and persuasive persuasion will influence tourists continuously in weighing which one is the best, which is more in his heart. However, on the other hand, this condition actually shows the weakness of the Tourism Office that tourists are a determining factor for the future of one of the tourist attractions, with the confidence of tourists supporting the economy of the people in tourist sites, especially under the Semarang Regency Tourism Office. Currently the Semarang Regency Tourism Office uses posters and advertises through yellowpages as a medium for delivering information, from the promotional methods carried out there are still obstacles, including the use of posters and through yellowpages advertising, which is very limited in terms of size and information to be conveyed. Therefore, it requires a promotional media that is able to provide complete information about tourism profiles to potential tourists

Based on data from Indonesia's Health Profile in 2016, Indonesia has a population of 258,704,986 people. Indonesia still ranks fourth with the largest population in the world after America, India and China. The total population of Indonesia in 2019 is estimated at 268,074,565 people, consisting of 117,674,363 urban residents and 150,400,202 rural residents. One of the programs to reduce population growth in realizing a family planning program (KB). The results of the prevalence of family planning in Indonesia based on the 2015 Fertile Age Couples Monitoring Survey reached 65.4% with the IUD method, which is still very low (4.7%). This study aims to determine the relationship between parity and husband's support with the use of IUDs at the Hanna Kasih Primary Clinic in 2020. The population in this study were acceptors who currently use IUD KB and have used IUD KB but now choose other types of family planning. The number of samples in this study were taken by total sampling, amounting to 30 people. The results obtained in this study from 30 respondents the majority were Scundipara, namely 11 (36.7%) respondents. Based on husband's support, the majority received positive husband support, namely 22 (73.3%). Based on the bivariate analysis, there is a significant relationship between parity and husband's support with the use of IUD contraceptives at the Pratama Hana Kasih clinic in 2020, with p value for parity <0.05 (p = 0.015) and for husband support with p value <0.05. (p = 0.000). It is hoped that the head of the Pratama Clinique Hanna Kasih will continue to provide support in the selection of the IUD contraceptive and the husband will continue to provide positive support for the wife to continue to use the IUD contraceptive device.

In human life the use of electrical energy is very important and needed, but over time the use of its consumption is increasing. Therefore, it is necessary to save electricity consumption activities. This effort is known as energy conservation, one of which uses the energy audit method. Energy audit is to calculate the level of use or Energy Consumption Intensity (IKE) in the Untirta Integrated Laboratory Building whether it is efficient in the use of electrical energy. Collecting data related to electricity usage, building profiles, and observing lighting loads, air conditioning/air conditioning loads and other loads. The use of the IKE formula as a form of analyzing the data. The results of the study stated that the IKE value in the Untirta Integrated Laboratory Building was 38.019 kWh/m2, from this value it can be seen that the IKE is efficient. This is based on the parameters used by ASEAN-USAID of 240 kWh/m2. There is an addition in saving energy if in the future there are additional burdens such as laboratory equipment or electronic goods. These savings can be made by using LED lamps and replacing TL lamps or using lamps with a lower wattage than the previous lamp and can be done by reducing the duration of usage in consuming electrical energy.

Snack bars are known to meet consumers' needs for nutrition, taste and practicality. There needs to be additional raw materials that are high in nutrients so that the products produced are beneficial to the body and also provide health effects. One plant that is high in nutrients and also provides benefits for the body is the Moringa plant. Moringa is known to contain more than 90 types of nutrients, namely in the form of essential vitamins, minerals, amino acids, anti-aging and anti-inflammatory. Our body needs antioxidants that can help protect the body from free radical attacks, considering that very many free radicals come from outside the body, namely in the form of foods that contain preservatives, dyes, fats, pesticides, pollution, dust and ultraviolet radicals. The process of making snack bars, roasting temperature and the proportion of flour are among those that can affect the characteristics and maturity levels of the resulting product. This study was conducted to determine the effect of temperature and flour formulations on sensory, texture profiles and antioxidants. The study used RALf (complete random design of factorial) 2 factors. From the results of this study obtained the results of roasting temperature affecting the profile value of the texture parameters hardness / hardness, gummieness / stickiness, chewieness / chewing power but has no effect on the results of antioxidant activity and hedonic sensory. The formulation of cornstarch and moringa flour on the results of the texture profile affects the parameters of resielience / snack bars. Formulation of corn flour snack bars and Moringa flour has a real effect on the antioxidant activity value of corn flour snack bars and moringa flour. Where the addition of moringa as much as 10% with a temperature of 120oC has a value of %ibhibisi as much as 87.66 and flour formulations also have a real effect on all hedonic sensory parameters, namely aroma, color,  taste and overall.

The hydrogen economy is a shift in the use of fossil energy to energy derived from hydrogen. Currently, Energy experts are trying to find fuel from new and renewable energy, especially in the transportation sector. This study seeks to determine the profile of energy consumption in the city of Semarang, especially in the transportation sector with simulation calculations in a certain year. By knowing the profile of energy consumption in the transportation sector in the city of Semarang, the output of this research is a planning study to build hydrogen economic infrastructure and make possible steps. At the end of this paper, it will be known how big the potential for hydrogen infrastructure development is so that later it can be a guide in determining the right policy in carrying out hydrogen infrastructure development in the city of Semarang. The design capacity of hydrogen production at PT. SAMATOR is 1000 m3/hour. Production breakdown per day : 550 m3/hour x 24hours = 13,200m3. If the production is maximized for 360 days per year, the total hydrogen production in Semarang is 4,752,000m3. In 2020, the demand for hydrogen in the city of Semarang = 1,955,780 m3. With this research data, it can be analyzed that hydrogen production in the city of Semarang can meet the needs of hydrogen for transportation in the city of Semarang.

The MDG`s national target is to reduce the maternal mortality rate by three quarters from the maternal mortality rate in 1990 of 405 per 100,000 live births to 102 per 100,000 live births in 2015. World Health Organization (WHO) Maternal Mortality Rate (MMR) in the world that is, 289,000 people, and estimates that 800 women die each day due to complications of pregnancy and childbirth. Approximately 99% of all maternal deaths occur in developing countries, about 80% of maternal deaths are the result of increased complications during pregnancy, childbirth and after delivery. The Health Profile of North Sumatra Province in 2016 states that the coverage of deliveries assisted by health workers shows an increasing trend, namely from 86.73% in 2010 to 90.05% in 2016, even the achievement in 2016 was the highest achievement in terms of delivery assistance by health worker in 7 years Effleurage technique is a massage technique using the palms of the hands in a circular motion pattern on the lower part of the waist. Massase effleurage technique can reduce labor pain during the first stage of the active phase if it is done correctly, which is done every time there is a contraction and done for about 20 minutes. The general objective of this study was to provide midwifery care for the first stage of labor to Mrs. A with the Effleurage Massage Relaxation Technique at the Pratama Marko clinic using Helen Varney's 7 steps midwifery management. In making this report the authors use descriptive methods with a case study model. The results showed that the respondent Ny. A 28 years old during the first stage of labor with massage relaxation technique at effleurage at the Pratama Clinic, Jl. Floodgate IV kec. Medan Johor.    

LSM-SAIN GGBI is moving agency onfield service child and church. CompanyInteractive profile is a multimedia based program that can used for support information andpromotion already there is on the SLM-SAIN GGBI. SAIN already do promotion with stage ToT (Training of trainers) as much three times, however even then not yet can reach whole region GGBI services, Year 2017-2020 ( before pandemic ) still a little churches involved in Movement Dear Indonesian children, so hinder achievement SAIN 's vision and mission for reach out , disciple and give socialization to children and churches.  LSM-SAIN GGBI needs a medium for help serve information and more promotions interesting and effective in reach children and churches, protect those who are still must keep going socialized as well as educating, without must do activity physical, that is with company profileinteractive.Interactive company profile could used for develop system information based on the website on the LSM -SAIN GGBI and could serve more view interesting for used children.  Results planning this in the form of company profile the interactive containing information and promotion of LSM-SAIN GGBI, Education, Socialization, and Games. Results from study this based onfrom test validation media expert is 37, from expert Theory is 36. Criteria this is atbetween 31-40 i.e belong to in valid category and results test try effectiveness product is 27. Criteria this are between 21 – 30 are classified as in category effective. So that toolhelp interactive company profile this could declared valid and effective as well as worthy for used.

Antenna mikrostrip merupakan salah satu jenis antena yang pengembangannya dimulai sejak tahun l970an dan hingga kini masih menjadi jenis antena yang terus dikembangkan. Berbagai aplikasi komunikasi radio tidak luput dari penggunaan antena ini. Salah satunya adalah modul RF yang bekerja pada frekuensi 433 MHZ. Pemilihan antenna mikrostrip untuk keperluan industri dan system komunikasi didasarkan karena bahannya yang sederhana (low profile), ringan, mudah diintegrasikan dengan sistem lainnya dan biaya fabrikasi yang relatif lebih murah, serta mampu memberikan parameter antena yang diharapkan dengan cukup baik hanya dengan teknik-teknik khusus yang sederhana. Pada penelitian ini antenna mikrostrip dipole dirancang dengan teknik fractal Cohen-minkowski. Hasil peranvangan dengan menggunakan teknik in dapat memnimalisasikan ukuran antenna sebesar 30% untuk iterasi pertama dan 40% pada iterasi kedua.

Frame 3D printer tidak memerlukan bahan yang dapat menahan beban yang terlalu berat karena bagian nozzle dan motor pada umumnya berukuran kecil. Namun untuk 3D printer yang berukuran besar, tetap harus disesuaikan. Pengkajian ini dilakukan dengan cara desain sistematis. Hasil desain itu dibentuk dalam sebuah model 3D yang dapat dianalisis secara simulasi. Kemudian analisis dengan memberikan contoh beban-beban dilakukan untuk menstimulasikan kondisi nyata. Apabila hasil simulasi model itu dapat menahan beban-beban dan melakukan fungsi yang telah diberikan, maka kajian dapat diselesaikan. Namun jika hasil model rangka tersebut tidak memenuhi kriteria yang ditentukan, maka desain perlu dibuat ulang agar lebih sesuai. hasil analisis struktur yang telah dilakukan, didapatkan hasil tegangan pada struktur juga masih jauh di bawah UTS dan YS dari aluminium profile.

Jembrak Village has very diverse potentials that can be used as capital in developing as a Tourism Village. The following are the problems encountered in Jembrak Village, such as: (1) the need to form a Community-Based Local Management Agency to manage the tourism village potential in Jembrak Village; (2) it is necessary to train and increase the ability of community human resources to become the main actors in the management of Tourism Villages in Jembrak Village; (3) it is necessary to explore the unique tourism potentials of Jembrak Village to be presented to tourists as a local tourist attraction; (4) the participation of the Jembrak Village community in the framework of environmental management for the realization of sustainable tourism. The author succeeded in realizing programs to support the development of Jembrak Village as a Tourism Village. These programs are the Establishment of Jembrak Village Tourism Village Managers, Making Tista Village Tourism Village Brochures, Making Tista Village Tourism Village Brochures, Making Trekking Routes, Producing and Packaging Local Culinary for Jembrak Village, Making Jembrak Village Tourism Profile Books, Making Local Souvenirs.

The health profile book for the province of East Kalimantan in 2016 Sickness Rate (Morbidity) describes the incidence of disease in a population over a certain period of time, which can be in the form of incidence rates or prevalence rates of a disease. The morbidity rate also plays a role in assessing the health status of the community. Data on population morbidity comes from the community (community based data) obtained through a morbidity study, and the results of data collection from the District/City Health Office, the health program manager at the provincial level. The morbidity rate in 2013 was 11.74 and decreased in 2014 to 9.18 and increased in 2016 to 11.90. (Dinkes: 2016) The implementation of PHBS is low, because there are still many students who eat snacks carelessly and there is still garbage scattered in the school yard. The UKS exists but the program does not run due to the lack of supporting facilities, and their lack of knowledge regarding how to wash hands properly and correctly. Aims to increase the knowledge of elementary school students in clean and healthy living behavior through the Socialization of Clean and Healthy Life Behavior (PHBS) with the Three Thumb system, Provide understanding and awareness to elementary school students about the importance of the school PHBS program Able to reduce morbidity due to lack personal hygiene in the school environment. The method used in this activity is the lecture method, demonstration method and practical method, data collection techniques, namely the initial test and the final test. The result is that there is an increase of 21% of students' knowledge of the importance of PHBS.

An analysis of the uncertainty value of measuring spur gear dimensions using a profile projector has been carried out. Dimensions of spur gears measured are pitch diameter, root diameter and outside diameter. The manufacture of 3 samples of spur gears was first made with a shape milling machine based on the initial technical data that had been determined. Then measurements were made with a profile projector measuring instrument for the three measuring dimensions, the best repeated measurement average was found in the root diameter measurement for the PJ01 sample of 32.4053 mm with a standard deviation of 0.0077 mm. The uncertainty method used is statistically and applies only to a series of observations. Determination of the uncertainty value is done by performing repeated measurements five times on the same sample. This method refers to ISO GUM with type A evaluation. The uncertainty value obtained for the best measurement is 0.0034 mm with an expanded uncertainty of 0.0068 mm with a 95% confidence level.