Publication Search

This research aims to analyze the implications of the transition in lease accounting standards to PSAK 73 on tax efficiency levels and net income structures within the retail industry, focusing on PT Mitra Adiperkasa Tbk as case studies. Employing a descriptive quantitative method, this research compares financial statement data from the 2017-2024 period to evaluate shifts before and after the regulation's enforcement. The results reveal that the implementation of PSAK 73 successfully improved corporate tax efficiency, characterized by a decrease in the Effective Tax Rate (ETR) below the statutory corporate tax rate. This was achieved by leveraging temporary differences that resulted in the recognition of deferred tax assets, providing a strategic advantage in the form of tax deferral. On the other hand, the application of this standard caused significant pressure on net profit during the initial transition phase due to the front-loading expense pattern derived from right-of-use asset depreciation and lease liability interest.

This study aims to improve subcontractor safety performance through strengthening governance systems, leading safety indicators, capability building, and performance monitoring at PT Putra Perkasa Abadi (PPA) Jobsite Borneo Indobara (BIB). The research was motivated by the increasing trend of subcontractor incidents during Quarter 1 to Quarter 3 of 2025, where seven incidents occurred and exceeded the company threshold. In addition, subcontractor performance evaluation scores remained below the target threshold of 70, while customer satisfaction scores in subcontractor management decreased from 8.45 to 7.58. The study applied a continuous improvement approach using Quality Control Circle (QCC), Pareto analysis, Nominal Group Technique (NGT), and root cause analysis with the Ishikawa method. Improvement initiatives were implemented through four strategic pillars: strengthening governance, reinforcing leading indicators, capability building, and integrated dashboard monitoring. The implementation results showed significant improvements in subcontractor safety management. The subcontractor incident frequency rate was reduced to zero incidents in Quarter 4 of 2025, subcontractor performance evaluation increased above the threshold to 70.81, and customer satisfaction scores improved to 8.55. The findings indicate that structured governance strengthening combined with real-time monitoring and subcontractor engagement can significantly improve mining safety performance and stakeholder trust.

 The quality of digital system services in the ship clearance process is closely related to the work effectiveness of shipping agency companies. The advancement of port operational services is influenced by the system’s ability to provide convenience, speed, accuracy, and service integration for users. The system used in the ship clearance process must be able to meet user needs and support inter-agency coordination so that ship services can operate more effectively and efficiently. This study aims to analyze the performance level and the level of user importance regarding the implementation of the Single Submission Pengangkut System in the ship clearance process at PT Trans Cakrawala Perkasa. The research employed a descriptive quantitative approach with a sample of 30 respondents consisting of ship agents involved in the clearance process. Data were collected through questionnaires, observations, and literature studies. The data were analyzed using validity tests, reliability tests, conformity level analysis, and the Importance Performance Analysis (IPA) method. The results indicate that the SSM Pengangkut System has made a positive contribution to accelerating document processing, facilitating system usage, increasing work productivity, and supporting coordination among related agencies. Based on the IPA Cartesian diagram, one indicator was identified as a priority for improvement, while other indicators were categorized as maintain performance, low priority, and high performance with lower importance levels. Overall, the implementation of the Single Submission Pengangkut System has been running quite well; however, continuous evaluation and improvement are still needed to optimize the ship clearance process further.

Blast hole drilling is an initial stage that plays a critical role in determining the success of blasting activities in mining and construction operations. Drilling quality directly affects rock fragmentation, drilling equipment efficiency, drilling equipment productivity, as well as blasting safety and costs. This study aims to analyze the influence of drilling parameters on blast hole quality, including hole diameter, drilling depth, hole inclination, and the suitability of drilling patterns with respect to the planned blasting design. The research methodology involves field observations, actual measurements of drill holes, and analysis of data obtained from drilling and blasting productivity. The results show that deviations in hole depth and direction can lead to irregular distribution of blasting energy, resulting in suboptimal rock fragmentation and an increased potential for flyrock and overbreak. In addition, the selection of appropriate drilling methods and equipment based on rock mass characteristics has been proven to improve productivity and blast hole quality. Therefore, controlling drilling parameters and implementing proper operational procedures are essential to enhance the overall effectiveness and productivity of blasting activities. This study is expected to serve as a reference for the planning and evaluation of blast hole drilling activities to achieve more efficient, safe, and economical operations.

Mine slopes play a crucial role in ensuring the safety and sustainability of mining activities. Continuous mining operations can alter slope conditions, thereby increasing the potential for instability and slope failures. Slope stability is influenced by the balance between resisting forces and driving forces acting on the rock mass. When the resisting forces are smaller than the driving forces, the slope becomes unstable and failure may occur. Therefore, slope stability analysis is essential to prevent landslide hazards, as it directly affects occupational safety, equipment security, other assets, and overall production continuity. These conditions have encouraged PT Insani Bara Perkasa to develop a more accurate and real-time slope monitoring system. The application of radar-based monitoring was initiated using the CHCNAV PS-2000 system. This study aims to analyze the deformation behavior of mine slopes using radar technology. Data acquisition was conducted at Pit K1 Mahakam, PT Insani Bara Perkasa, covering Area 1 South, AR 2 South, AR 3 South, AR 5 South, AR 6 South, AR 7 West, AR 8 West, AR 9 South, AR 13 South, as well as TA-2, TA-3, and TA-6 areas. The study was carried out from November 2025 to December 2026. The analysis results indicate that most monitoring points are in stable conditions, with indications of a progressive phase observed in the AR 6 South area.

Background: Accurate detection of renal cysts on CT urography requires high diagnostic precision, while manual interpretation by radiologists is susceptible to inter-observer variability and potential delays in clinical decision-making. These challenges underscore the need for a reliable automated detection system to support radiological assessment. Objective: This study aims to develop and evaluate the performance of the Neo-ZasAI application based on the YOLOv8 algorithm for the automatic identification of renal cysts. Methods: Employing a Research and Development design using the ADDIE model, the study encompassed needs analysis, model design, software development, system implementation using 200 CT urography images, and diagnostic performance evaluation. Classification results generated by Neo-ZasAI were compared with radiologist readings through confusion matrix analysis and ROC–AUC assessment. Results: The findings indicate that Neo-ZasAI achieved an accuracy of 97,5%, sensitivity of 96%, specificity of 99%, positive predictive value of 98,9%, and negative predictive value of 96,1%. The ROC analysis yielded an AUC of 0.988 (p < 0.001), demonstrating excellent discriminative capability and high concordance with radiologist interpretations as the diagnostic gold standard. Conclusion: These results suggest that Neo-ZasAI is capable of performing rapid, consistent, and accurate renal cyst detection and is thus feasible for implementation as a clinical decision support system in radiology, with potential integration into PACS workflows and further development to enhance model generalizability.

This research is motivated by the importance of preserving the authenticity of the Qur’an as the primary source of Islamic teachings and law, which serves as the foundation for legal certainty within the Islamic Family Law system. Historical records show that the codification process of the Qur’an carried out by Zaid bin Tsabit during the caliphates of Abu Bakr and Uthman bin Affan played a crucial role in ensuring the integrity and uniformity of the revealed text, thereby having significant implications for the validity of Islamic legal arguments. This study aims to critically analyze the role of Zaid bin Tsabit in the Qur’anic codification process and its implications for the certainty of the textual basis (nash) in Islamic family law. Using a qualitative method with a historical-normative approach, this research combines chronological and normative analyses of primary sources such as the works of as-Suyuthi and az-Zarkasyi, as well as secondary sources in relevant academic literature. The findings indicate that the codification process of the Qur’an holds not only historical value but also juridical significance, as it ensures the authenticity of the text as the foundation of Islamic law. Therefore, integrating historical and normative aspects is essential to maintaining the authority of Islamic legal sources in the contemporary era.

This study examines sarcastic utterances by netizens on TikTok during the 2024 Gorontalo Regional Election, focusing on their forms, functions, and influencing factors. The research analyzed comments on TikTok videos related to the election, specifically those containing sarcasm, selected purposively. Using a qualitative descriptive approach, the study categorized sarcastic utterances into four forms: (1) action sarcasm, (2) trait sarcasm, (3) result-of-action sarcasm, and (4) advisory sarcasm. The functions of these utterances include expressing opinions, prohibition, information, emphasis, rejection, commands, and statements. The study also identified two main factors influencing the use of sarcasm: emotional outbursts and disappointment toward the candidate pairs. The findings suggest that sarcasm is employed as a medium for expressing attitudes, emotions, and political judgments in digital discourse. This research highlights the role of sarcastic speech acts in the political conversation on social media during election campaigns.

Odoo training at PT Tamaddun Inti Perkasa aims to improve existing business processes within the company through process integration, data transparency, and operational efficiency. Odoo implementation can improve the Company's operational efficiency and also increase HR capacity through mentoring and training to acquire digital skills relevant to the development of Industry 4.0. The training was conducted through participatory practices to improve digital skills through real company data. The training stages included identifying company problems, general socialization of Odoo usage, training, mentoring, evaluation, and feedback. The training participants consisted of 9 people from several departments and was held on December 8, 2025. A pre-training questionnaire proved that the company's employees are aware of the importance of integrated data management. This training activity successfully improved digital competency through the use of Odoo and respondents agreed that using Odoo can help simplify their work. The use of a flexible integrated system according to company needs such as Odoo is one solution. The use of six modules: Manufacturing, Inventory, Sales, Purchasing, Accounting, and Point of Sales (POS) is considered very important and must be understood by the company as a starting point for further development.

Mining sequence design is one of the important stages in open pit mining activities that aims to organize the excavation stages so that production activities run effectively, efficiently, and in accordance with the established targets. This research was conducted at PT Putra Perkasa Abadi Site SKS with the aim of designing a mining sequence in January and February 2025. The methods used include analysis of topographic data, geology, pit design, and monthly production targets. The data was processed using mining software to determine the excavation sequence based on elevation, overburden volume, and coal reserves. The design results show that the total planned overburden and coal volume is able to meet the company's production targets by considering slope stability and the efficiency of digging and loading equipment. In addition, the resulting sequence design also takes into account aspects of work safety and field operational conditions, such as mine road access and drainage systems. With a structured design, it is expected that mining activities during this period can run according to schedule, minimize operational obstacles, and support the achievement of production targets and cost efficiency at PT Putra Perkasa Abadi Site SKS.