Publication Search

PLN (Persero) is the state-owned company responsible for supplying electrical energy in Indonesia and plays a crucial role in ensuring the reliability and continuity of power distribution. Therefore, all electrical equipment, particularly power transformers, must be maintained in safe and reliable operating conditions. Transformers function to change voltage levels from high to low or vice versa and are essential components in the electric power distribution system. One important transformer component that requires periodic maintenance is the On Load Tap Changer (OLTC). To maintain transformer performance and extend its service life, routine maintenance activities such as OLTC oil replacement are necessary. PT. PLN (Persero) ULTG Rangkasbitung conducts regular OLTC oil replacement twice a year as part of its preventive maintenance program. Transformer oil serves as both an insulating medium and a cooling agent; therefore, its condition greatly affects transformer reliability and operational safety. Degraded oil quality can cause insulation failure and reduce transformer efficiency. This study aims to describe the procedure and implementation of On Load Tap Changer oil replacement at the transformer substation of PT. PLN (Persero) ULTG Rangkasbitung. The research method used is field research, carried out through direct observation and interviews with maintenance personnel. The results of this study are expected to provide a clear understanding of the OLTC oil replacement process, support proper maintenance practices, and emphasize the importance of transformer maintenance in ensuring the reliability and sustainability of the electric power system.

The increasing need for insulation in electric power systems encourages the discovery of high-performance and sustainable dielectric materials. This study presents a Literature Review of biomass-based composite insulator research from 2018-2025 to synthesize the effect of filler type and treatment on the electrical, thermal, and mechanical properties of polymer composites. Literature was analyzed from reputable databases with inclusion criteria, and thematic analysis data extraction. Processing methods generally include washing, acid/alkali treatment, calcination, and advanced production techniques such as sol-gel and ultrasonication, integration of biomass fillers especially at low fractions (3-7%). The results show 1) the dominance of the use of rice husk as a source of biosilica for the main matrix filler of the insulator. 2) the performance of biomass composite insulators is highly dependent on the quality of purification, particle size, and surface modification of the filler. 3) there is a significant increase in the insulator's breakdown strength, resistivity, and thermal stability with the addition of biomass fillers to the main matrix. 4) the long-term stability of biomass materials against humidity and thermal aging has not been evaluated in depth.  

The Paiton Steam Power Plant (PLTU) is one of the main sources of electrical energy in East Java, which plays a vital role in maintaining a sustainable electricity supply. The reliability of generator units is a key element in maintaining stable energy distribution. However, the high frequency of sudden generator failures poses serious challenges, such as increased downtime and increased maintenance costs. To address these challenges, this study aims to design a generator maintenance prediction model based on the Naive Bayes algorithm with a predictive maintenance approach. This study uses historical maintenance data and key sensor parameters such as temperature, oil pressure, and vibration as input. The data is analyzed through several stages, namely data preprocessing, selection of relevant features, and labeling generator conditions into three categories: Normal, Warning, and Critical. The Naive Bayes model is trained to classify the data probabilistically to generate predictions of future generator conditions. Model evaluation using accuracy metrics and a confusion matrix shows that the model successfully achieved an accuracy rate of 89% and was able to provide early warnings of potential failures up to 3 days before failure occurs. The implementation of this system is expected to support the shift in maintenance strategies from reactive and scheduled systems to data-driven predictive systems. Implementing failure predictions allows the technical team at the Paiton PLTU to conduct planned maintenance, avoid sudden disruptions, and extend equipment lifespan. Thus, this model has the potential to reduce operational downtime by up to 25%, while providing significant savings in operational and logistics costs. This research also shows that integrating machine learning technology into energy facility management can improve the efficiency and resilience of the overall electric power system.

The increasing need for electrical energy in Indonesia encourages the development of new renewable energy (EBT), including hydroelectric power plants (PLTA) as an environmentally friendly solution. This research was conducted at the Mentawa Dam, West Toili District, Banggai Regency, Central Sulawesi, to analyze the potential of water energy that can be utilized as a source of micro-hydro power plants (PLTMH). This dam currently functions as irrigation and a tourist attraction, but has significant potential to generate sustainable electrical energy. The research methods include measuring water discharge using the float method, measuring the height of the water fall (head) with an altimeter and GPS, and analyzing the potential for electrical power using the formula P = η ⋅ ρ ⋅ g ⋅ Q ⋅ H. The measurement results show an average water discharge of 3.01 m³ / s and a water fall (head) of 6.56 meters. With a turbine efficiency of 80%, the potential electrical power that can be generated reaches 154.76 kW. This study recommends the use of Kaplan turbines in Mentawa Dam, which are ideal for large discharge conditions and low to medium heads, and can adapt to discharge fluctuations, making it an optimal choice to maximize energy potential. This research is expected to provide sustainable energy solutions for the people of Toili Barat District and support the development of the tourism sector.

This study aims to analyze the performance and conduct reverse engineering of the Francis Turbine runner at the Tanggari 1 Hydroelectric Power Plant (PLTA Tanggari 1) through 3D scanning and Computational Fluid Dynamics (CFD) simulation. The main objective is to evaluate the turbine's efficiency and identify areas for improvement in the runner geometry. Data from the 3D scan are used to reconstruct a CAD model, which is then numerically tested to predict hydraulic performance. CFD simulations are carried out under various guide vane openings and head variations. The simulation results show a maximum efficiency of 93% at a head of 122.4 meters with a guide vane opening angle of 26° and a flow rate of 8.5 m³/s. The resulting performance curve and hill chart indicate the optimal operating point or Best Efficiency Point (BEP), which serves as a critical reference for turbine operation settings. Flow phenomena such as separation and vortex formation were detected under off-BEP operating conditions, potentially causing pressure fluctuations and vibrations. As a technical recommendation, it is advised to operate the turbine close to the BEP to minimize vibrations and energy losses. Furthermore, the runner geometry obtained from reverse engineering can serve as a basis for component refabrication and the development of new runner designs that are more adaptive to varying load conditions.

Iren Mailuhu (64210645), The Influence of Competency and Work Discipline on Employee Performance at PT. PLN (Persero) Customer Service Implementation Unit (UP3) Depok PT. PLN (Persero) PT. PLN (Persero) is a company owned by the state. The task of this company is to provide electricity distribution services and organize its main service units into several parts that are appropriate to the electric power system, such as generation, transmission and distribution. PT. PLN (Persero) in managing human resources needs to pay attention to the competency and work discipline of each employee in order to produce employees who are of good quality and superior performance. This research aims to determine the influence of competence and work discipline on employee performance at PT. PLN (Persero) Customer Service Implementation Unit (UP3) Depok. The research method used is a quantitative method with data collection using saturated samples or non-probability sampling. A total of 56 respondents were sampled and the data obtained was processed using SPSS version 27 with multiple linear regression analysis techniques, The results of the analysis show that Y = 6.651, X1 = 0.625, Based on the coefficient of determination test, it was found that the two independent variables had an influence of 68.1% on employee performance.

Understanding electric motors and transformers is crucial in the field of electrical power engineering education. To enhance practical learning, a trainer was designed for single-phase AC motors, incorporating an Earth Leakage Circuit Breaker (ELCB) safety system to prevent electric current leakage, which could pose a risk during experiments. The aim of this research is to design and develop a trainer module that serves as both an interactive and safe learning tool for laboratory practicums. The trainer is equipped with a safety circuit, along with controllers such as a voltmeter, ammeter, selector switch, pushbutton, relay, and potentiometer, allowing students to understand and control various electrical parameters. The tool underwent voltage measurements and functional tests at three distinct measurement points to evaluate its performance and safety features. The results demonstrated that the trainer performed effectively, significantly enhancing students' practical understanding of electric power systems and contributing to better hands-on learning experiences in electrical engineering.

Hydroelectric Power Plants (HPP) are a type of power plant that utilizes renewable energy from water flow. The hydroelectric system works by converting the kinetic energy of flowing water into mechanical energy, which is then converted into electrical energy. Water flows through a penstock directed towards the turbine, where it strikes the turbine blades, causing rotation. To maintain the stability of the turbine's rotational speed at the Maninjau HPP, a governor system is used. The Maninjau HPP consists of four generating subunits with a nominal rotational speed of 600 rpm. The governor system functions to stabilize the turbine's rotation at the nominal speed of 600 rpm, as the speed affects the generator's output frequency. The stabilization process is carried out by adjusting the Guide Vane openings, which are the blades surrounding the turbine. The Maninjau HPP has a speed drop of 3%, with a frequency reduction of 1.5 Hz. Additionally, a frequency change of 0.1 Hz will result in a load change of 0.13 MW.

This research aims to analyze the impact of a new coil winding design in 3-phase induction motor on effiiciency, with the objective of creating a new 3-phase induction motor with improved performance. The research was conducted in the Electric Power System Laboratority, Department of Electrical Engineering, Padang Institute of Technology, and focuses solely on efficiency and its relationship to motor output power. The study involved redesigning the coils of a conventional 3-phase induction motor into a 6-phase coil design without altering the motor’s position, followed by testing both motors and comparing the efficiency of the conventional 3-phase induction motor with that of the redesigned 6-phase motor using the asymmetrical double methode. The result show that the efficiency of the 6-phase coil-designed motor increased compared to the conventional 3-phase induction motor.   importance of maintaining data security and implementing AI strategically to provide optimal benefits for consumers and business development.

The Sutami Hydroelectric Power Plant managed by PLN Nusantara Power UP Brantas is one of the power plants that relies on air resources to generate electricity. However, the optimization of electricity production can still be improved by considering the availability of primary energy and the interests of related stakeholders. This study aims to create a simulation of operating patterns to optimize the daily electricity production of the Sutami Hydroelectric Power Plant using the MS Excel Solver program. The total electrical energy in March based on the results of the simulation calculation was 56,537,445.55 MWh, 3.09% greater than the actual data of 54,792,800 MWh. The results of the simulation calculation of electricity production in June 2024 were 27,564,315.75 MWh, 3.82% greater than the actual data of 26,511,800 MWh. In FDC 2014-2023, the average mainstay discharge is 32 m3/s available throughout the year to be utilized by water turbines to produce a minimum power of 20 MW. Meanwhile, from the estimated historical data obtained by FDC 2024-2033 with an average mainstay discharge of 40.68 m3/s to produce a minimum power of 30 MW.

Electricity theft is an activity that is detrimental to the state where PLN as the party that distributes electricity has unknowingly lost its main commodity without any reciprocity in the form of payment. To overcome electricity theft, Execution of Electricity Use (P2TL) is carried out. Implementation of Electric Power Use (P2TL) is an activity to control electricity users who do not comply with installation standards. P2TL activities include planning, inspection, technical and/or legal actions and settlements carried out by PLN on PLN installations and/or Electric Power User installations. P2TL activities carried out in the Koba area from October to December 2023 found 3 violations in the area. The kWh saved as a result of P2TL from October to December was 21,480 kWh. From the kWh savings obtained, the highest loss was in October of 0.47% and the loss obtained without P2TL kWh savings was 0.48%. So that the kWh savings obtained from P2TL can reduce Non-Technical Losses. The more P2TL violations are found, the higher the reduction in losses obtained by PT PLN (Persero) ULP Koba. 

Demand for additional electric power increases as electricity demand increases, but the process is often hampered by obstacles in the operational workflow. The main objective of this research is to analyze operational risks in kWh addition services using the Root Cause Analysis (RCA) method using the 5 Why technique and fishbone diagram. The RCA method equipped with a fishbone diagram will produce a mapping of the causes of operational risk obstacles in the PT XYZ kWh addition service in a structured manner. In the process, the author identifies and analyzes the various risks faced, and proposes improvements aimed at improving service quality. Based on the results of the research analysis, there are two operational risks related to kWh addition, namely: the migration process of postpaid kWh meters to prepaid meters and the use of electricity by customers who exceed the contracted power. The conclusion shows that most of the operational risks come from customer behavior. Proposed improvements include increasing the frequency of inspections, proactive planning for power additions, and transparency of information to customers. The results of this report are expected to make a positive contribution to operational risk management at PT XYZ and improve customer satisfaction.

ticular building requires a lot of time. This monitoring is carried out continuously so that it is hoped that there will be an increase in efficiency, time, energy and costs in the electric power monitoring process. Each radio has an operational transmitter located in the broadcast studio so that the broadcast range is wider and clearer and can be enjoyed by the public. The research has several objectives, namely; [1] know about radio trans- mission, [2] know how audio distribution works, [3] how wave propagation works.

Distribution transformers have a very important role in the electric power system. The lifespan of transformers in electric power systems will decrease over time. The reduced service life of distribution transformers is caused by several factors, including loading, ambient temperature, transformer winding temperature and transformer oil temperature. The author uses quantitative and qualitative research types. This research was conducted to determine the remaining useful life of distribution transformers. The data used in this research are transformer template data and peak load data during the day and night. The results of data processing obtained state that the first transformer's estimated remaining life with a load > 80% is 18 years starting from 2023, the second transformer's estimated remaining life with a load > 80% is 16 years starting from 2023, for the third and fourth transformers it is not calculated because it has been used since 1982 or is around 41 years old. For the winding temperature on the first transformer LBP 84 ℃ and BP 89 ℃, on the second transformer the winding temperature LBP 81 ℃ and BP 96 ℃. Both transformers are still considered good because the hot spot temperature is below the maximum limit set by the IEEE in 1955, namely a temperature of 98 ℃.  

Electrical power is a very important source for life. One of the electrical components is a distribution transformer which is used to transmit electrical voltage from the substation to the load center. Every year the electricity demand increases, so that the transformer works optimally, you must also pay attention to the loading. Load imbalance on electric power distribution transformers always occurs and this imbalance occurs due to the use of electrical energy. The current flowing in the neutral conductor of the transformer causes an imbalance in the transformer load and losses, namely losses due to the neutral current in the neutral conductor of the transformer. When analyzing mass, use quantitative methods. After analysis, it shows that the transformer is in an unbalanced state where neutral current appears in the transformer. To determine the efficiency of the distribution transformer  

In this review, the creator features research on multiple ways of enhancing the improvement of electrical control framework execution in working on the exhibition of electrical gadgets. This examination plans a voltage stabilizer utilizing a Programmable Logic Controller (PLC) TM221ME16R with a comparator framework. The assessment procedure utilized is to utilize a composed study by taking a gander at books, journals and different works that can be utilized as purposes behind research, with instructive arrangements it will fabricate researchers' understanding and foster data about the issues brought up in the exploration. The technique in view of enhancement with these limitations has likewise been applied to agent electric power frameworks. The adequacy of these devices in working on the unique execution of the framework has been affirmed through the aftereffects of eigenvalue computations. Further confirmation has likewise been brought out through time-area reproductions where shortcoming conditions have been utilized to start framework homeless people.

Lightning has always been a dangerous threat to the equipment of electric power systems consisting of: power plants, substations, transmission lines and distribution lines. Generally, overhead high-voltage transmission lines are exposed to lightning strikes. Therefore, the degree of protection against lightning is determined based on the degree of insulation of the equipment. To prevent damage to equipment due to lightning strikes, arresters are used. In this study, three arrester models were used as comparisons, namely. IEEE arrester model. The system was simulated using Alternative Transients Program (ATP) software. The results showed that the lightning rod was declared successful in protecting the transmission system, where the three lightning rods had a Margin Protection (MP) of arresters that reached 28%. In the simulation, it is known that the IEEE arrester successfully cut off the lightning current in the transmission system so that the transient overvoltage recorded on the transformer does not exceed the Basic Insulation Level ((BIL) trafo.  

The community's need for electric power is increasing and efforts to monitor electric power are to obtain information on the results of measurements of voltage and electric current. Based on the analysis of the measurement results, it can be concluded that (1) the current measurement is more optimal when using the SCT-013 current sensor, (2) the voltage measurement is more optimal when using the PZEM-004T voltage sensor, (3) the difference in measurements using the current sensor is greater than the difference with a voltage sensor.

In Indonesia in particular, SCADA has been recognized and started to be implemented in electric power system control since the early 1980s. In other more developed countries, the application of SCADA is growing along with developments in computer and telecommunications technology. At a time when the development of SCADA was not as sophisticated as it is now, there was an idea to make it easier to maneuver, namely in a simple network system using SCADA we can supply additional power or do power outages easily so that the overload does not occur. After implementing the SCADA system there are less time and frequency savings compared to before implementing the SCADA system. This means that the SCADA reliability index is much better after implementing the SCADA system..    

The purpose of this article aims to analyze technological developments in the industrial sector. SCADA requires a communication protocol. To increase efficiency in the industrial world, the SCADA system has been widely used in various industrial fields, such as manufacturing, power generation, oil and gas, telecommunications and transportation. Control over the arrangement of an electric power distribution network can be effective and efficient and will be equipped with a SCADA system. Control of the electric power network based on the SCADA system is really necessary considering that the growth of electric power is very high and adds to the increasing complexity of the electric power network system. The SCADA system ((Supervisory Control And Data Acquisition) itself is a system created for data retrieval, storage, analysis and also for controlling a plant/system that has been used remotely.