Publication Search

This Research is generally aimed at designing a system that can solve problems at Hotel Oyo Jakarta Selatan. In addition to the use of bathroom tools, there is a need for a gas controller in the bathroom space, especially ammonia gas and other gas in the bathroom. The bathroom control system at Hotel Oyo Jakarta Selatan is currently ineffective, in the use of the bathroom tools to hotel guests and hotel staff. The reseach method used by researcher is The research step begins with research and information gathering, then planning and developing the initial form of the product or system, and field testing the feasibility of the system or product, if there is a revision, it can be developed further before conducting the main field test. . Based on the research results, monitoring ammonia gas in rooms based on a microcontroller can be a solution for the Oyo South Jakarta hotel in monitoring rooms, both from guests or hotel employees more effectively and efficiently , and to facilitate the management of existing bathroom rooms in the Hotel Oyo Jakarta Selatan

The infrared detector (or IR detector) is an optoelectronic component and represents the core element of gas analyzers, flame sensors, devices of spectral analysis, as well as non-contact temperature measurement. pyroelectric infrared detectors work with  stabilization time  in a wide operating temperature range (-55 ... 85) °C, capable of measuring the slightest amounts of infrared radiation (as little as a fraction of a nW) with wavelengths between 1 µm and > 25 µm. The difference of the good pyroelectric or No good (NG) devices shown by graph of voltage offset operating that can check by manual using Digital Multi Meter or semi auto by using microcontroller One of importance measuring of IRD sensors  is Offset Voltage, stabilization of offset voltage indicate the sensor is stable with certain level value. Stabilization value measurement during measuring time means the average value not so much different with fluctuation value.  10 bit ADC on Atmega 328 that main microcontroller on Arduino Uno is capable to measure the Offset Voltage of IRD sensor and check the measurement values is within specification of IRD sensor.