Publication Search

One of the goals of a building is to create a comfortable environment that does not affect the health and operations of its occupants, therefore a system needs to be created to ensure comfort in classrooms. To fulfill a comfortable situation, there is a standard that regulates comfort, especially thermal and visual comfort. Thermal comfort is regulated in SNI 03-6572-2001 and visual comfort is regulated in SNI 03-6575-2001. The aim of this research is to design a tool to automatically monitor temperature and lighting, determine greater accuracy, determine temperature and lighting comfort distances, and test Smart Comfort measurement results in accordance with the SNI-03-6571-2001 and SNI-03-6575-2001 conformity standards. This design uses ESP32 with IoT-based LDR and DHT11 sensors which can be seen on the web and application, determines the accuracy and range of Smart Comfort values for monitoring temperature and lighting and determines the suitability of measurement quantities in the SDN PINANG 3 classroom.

This study presents an innovation design for an Internet of Things (IoT)-based watering and liquid fertilizer control system for chili plants using a NodeMCU ESP32. The main problem addressed is the manual watering and fertilizing process, which makes it difficult for farmers to monitor soil moisture, temperature, air humidity, and light intensity in real time. The recommended method used in this draft is Research and Development (R&D) with a prototyping approach because the study focuses on designing, building, integrating, and testing an IoT device through iterative stages. The system is designed using a soil moisture sensor, DHT11, LDR sensor, two-channel relay, two 12 V DC pumps, 16x2 I2C LCD, and the Blynk Mobile application for remote monitoring and control. Sensor data are transmitted to Blynk as percentage values and plant condition statuses, while the water and fertilizer pumps can be controlled using virtual buttons. The control logic defines the optimal condition for chili plants based on soil moisture of 60-80%, temperature of 25-30°C, air humidity of 60-80%, and light intensity of 50-90%. Prototype documentation and functional testing data will be completed in the next stage.

Cracker drying process is considered inefficient because it still depends on weather factors and manual supervision, which can affect the quality of the production results. To overcome this, a smart shrimpcrackerdryingdevicebasedonan Arduino Uno microcontroller with an automatic closing mechanism and an automatic container has been designed and built. This system is equipped with a rain sensor and an LDR sensor to detect weather conditions around the device, as well as a DHT11 sensor to monitor humidity in the cracker storage container. In addition, an ultrasonic sensor is used to automatically regulate the movement of crackers into the storage container after the drying process is complete. A DC motor controlled by a BTS7960 driver functions to move the cover roof and the cracker transfer mechanism, while a limit switch is used to limit the motor movement.Based on the test results, this device can work automatically Shrimp crackers are one of the typical food products widely produced by the people of Bunga Karang Village, Tanjung Lago District, Banyuasin Regency. The traditional shrimp following changes in environmental conditions, thereby increasing the efficiency of the drying process and maintaining the quality of shrimp crackers produced by the residents of Bunga Karang Village.

Fire disasters can occur at any time in residential areas or schools, which are often triggered by electrical short circuits, the use of gas stoves, to minor negligence such as cigarette butts. As a preventive effort of Department of Education of Semarang, this research aims to create a prototype of a microcontroller-based early detection and fire suppression system with C programming. This tool uses NodeMCU as a control center that integrates fire sensors and DHT11 sensors to monitor room temperature in real-time. If the system detects any indication of fire or a significant temperature spike, a buzzer will activate as a warning alarm and the fan will work automatically to assist the initial extinguishing process.

The IoT-based CO and COHb gas detector is a device used to detect the presence of carbon monoxide (CO) gas and the level of carboxyhemoglobin (COHb), supported by Internet of Things (IoT) technology for remote monitoring and real-time reporting. This device will be used in hospital rooms, serving as an important solution in efforts to ensure the safety of patients, medical staff, and hospital visitors. With the presence of the CO and COHb gas detector, hospital staff will find it easier to detect the presence of CO gas in the rooms within the hospital. The operation of this device is quite simple: just place the device in the room in the "on" condition, and it will automatically detect the CO and COHb gas present in that room. The measurement results of CO and COHb gas will be directly sent to Google Sheets for storage of the measurement results. The creation of this device requires several components, such as the ESP32 as the microcontroller, DHT11 as the temperature detection sensor, MQ7 as the CO gas detection sensor, and the application of IoT using a Google Sheets web app to monitor results remotely and store measurement results. According to the analysis of the device created by the researchers, the performance or functionality test results of the CO and COHb gas detector can be used smoothly. The author conducted functional tests or performance tests of the device by measuring data in a free room, roadside environment, motorcycle exhaust smoke, active smokers, and passive smokers.

Maintaining stable cage temperature is a crucial factor in the success of broiler chicken farming, especially in close house systems that rely on optimal microclimate control. Temperature instability can lead to thermal stress, reduced growth rates, and increased mortality in broilers, particularly during the early stages of life (0 to 30 days old). This study aims to design and implement an automatic temperature control system based on the Arduino Uno microcontroller integrated with a DHT11 temperature and humidity sensor in the broiler chicken cages of PT. Barokah Restu Utama. The system is designed to read temperature and humidity in real-time and automatically activate or deactivate cooling devices such as fans or heating devices like incandescent lamps, depending on the temperature range required for each growth phase. The ideal temperature range used as a reference in this system includes 30–32°C for chickens aged 0–7 days, 29°C for ages 8–14 days, 28°C for ages 15–21 days, and 26–27°C for chickens aged 22–30 days. Testing results show that the system is capable of maintaining stable temperatures according to the specified standards for each growth phase. With this automatic control system in place, broiler chicken maintenance becomes more efficient and effective. The risk of mortality due to heat stress is significantly reduced, and chicken growth becomes more optimal. This technology offers a practical and economical solution, especially for small- to medium-scale broiler chicken farmers who use close house systems. The system is easy to operate and relatively affordable to install, making it an accessible innovation that supports better livestock management through automation and smart farming practices.

The food security program involving chili cultivation in Pentur Village is hindered by inefficiencies in water use and suboptimal plant growth, primarily due to traditional irrigation methods that fail to consistently maintain ideal soil moisture and temperature. This issue is exacerbated by unpredictable environmental shifts, such as fluctuating weather patterns, and a lack of precise irrigation control stemming from technological limitations. To address this, a system for monitoring and regulating chili plant irrigation using IoT technology was developed. This system employs humidity and temperature sensors connected to an IoT platform like Blynk, enabling real-time observation of plant and environmental conditions. Data on soil moisture, air temperature, and humidity are stored in a database, and irrigation is automated based on soil moisture levels. The goal is to enhance water efficiency, minimize risks associated with over or under-watering due to environmental variations, and improve both yield and quality of the chili crop. This IoT-based system aims to simplify chili plant management for Pentur Village farmers and significantly boost agricultural output.

Proses budidaya jamur tiram sangat tergantung dengan kestabilan pada kondisi lingkungan, terutama suhu ruangan dan kelembapan yang harus di perhatikan oleh para petani.  Hal ini menjadi permasalahan ketika proses pemantauan dan pengendalian lingkungan secara manual dilakukan, membutuhkan tenaga yang kuat dan waktu yang cukup besar. Penelitian ini bertujuan Mendesain rancangan sistem monitoring dan kendali suhu ruangan budidaya jamur tiram secara otomatis dan jarak jauh berbasis teknologi Internet of Things (IoT) untuk para petani. Dalam proses sistem ini penelitian ini memanfaatkan sensor suhu dan kelembapan DHT11 sebagai input, mikrokontroler Arduino Uno sebagai pemroses data, dan modul ESP8266 sebagai pengirim data nirkabel ke aplikasi Android berbasis Blynk.  Adapun metode dalam penelitia ini digunakan pengembangan yang digunakan adalah Software Development Life Cycle (SDLC) model waterfall, dan menganalisis kebutuhan, perancangan sistem, implementasi, pengujian, hingga pemeliharaan. Hasil pengujian menunjukkan bahwa sistem mampu membaca suhu dan mengaktifkan blower (kipas) secara otomatis ketika suhu melebihi ambang batas, serta menampilkan data suhu dan status kipas secara real-time melalui aplikasi Blynk. Dengan adanya sistem ini, pemantauan dan pengendalian lingkungan budidaya jamur dapat dilakukan lebih efisien dan fleksibel dan mendukung produktivitas budidaya secara optimal.

This study aims to design a smart home system leveraging the Internet of Things (IoT) concept by utilizing the Wemos D1 microcontroller combined with fuzzy logic to improve home energy management and safety. The hardware development process involves integrating a PIR sensor for motion detection, a DHT11 sensor for measuring temperature and humidity, and actuators including relays for lighting and a solenoid lock for doors. The system is operated remotely using the Blynk platform and supports notification alerts through Telegram. Testing results confirm that the prototype is capable of controlling devices, tracking environmental data in real time, and effectively sending alerts when movement is detected. Overall, the system presents a practical, responsive, and user-friendly smart home solution that enhances user convenience and household security.

Oka Jamur Bali is one of the oyster mushroom cultivation farmers. Lack of efficiency in regulating temperature and humidity in mushroom barns is an important factor in the growth of mushroom fruiting bodies. This condition requires an innovative solution to regulate and monitor temperature and humidity in the barn area. This research aims to build a prototype using Arduino UNO, ESP32, DHT11, pump and Internet of Things (IoT) technology.  The monitoring system design uses Arduino UNO, NodeMCU ESP32, DHT11 and DC pump with 12V voltage. Arduino UNO functions as a control system to manage and control the temperature and humidity parameters of the mushroom barn environment with the DHT11 sensor used to accurately measure temperature and humidity. The combination of NodeMCU ESP32 and Arduino UNO aims for monitoring through the ThingSpeak platform which can be accessed with a smartphone connected to the internet network. Based on the results of the prototype of the automatic temperature and humidity control system, the system is able to measure the environmental conditions of the mushroom barn with humidity measurement results in the range of 79% - 82% and the average temperature during the test reached 29.35°C. The application of the system was able to reduce the temperature by 2.28% with an average temperature of 28.19°C and increase the relative humidity by 6.27% with an average humidity of 81.1% in the mushroom barn area. The results of income between the income generated by using the automatic temperature and humidity control system tool and the income of farmers without using the tool increased by Rp. 16,416.

Kelembapan dan suhu merupakan faktor yang penting dalam budidaya jamur karena jamur membutuhkan kelembapan dan suhu tertentu untuk tumbuh dengan baik. Aspek lingkungan perlu diperhatikan dalam budidaya jamur adalah selama masa pemeliharaan dan suhu di dalam rumah jamur harus dijaga di kisaran 15-30°C. Suhu di bawah 15°C mengakibatkan tubuh buahnya mengecil dan tangkainya panjang, tetapi kurus. Jika suhunya di atas 30°C, suhu akan menyebabkan payung jadi tipis dan ukurannya kerdil. Kelembapan udara optimum yang dibutuhkan antara 80-90%. Jika kelembapan udara terlalu tinggi, jamur akan cepat membusuk dan jika kelembapan terlalu rendah, jamur akan menjadi kerdil dan kurus. Untuk memonitor tingkat kelembaban dan suhu dalam budidaya jamur tiram dibutuhkan sistem monitoring yang berguna untuk mengetahui kondisi tanaman secara otomatis dan real-time. Internet of Things (IoT) memiliki konsep yang bertujuan untuk memperluas manfaat yang tersambung dalam koneksi internet secara terus-menerus. Penggunaan Internet of Things (IoT) dalam memonitor suhu dan kelembapan dapat membantu efisiensi dan mempercepat pengiriman informasi kelembapan dan suhu udara tempat jamur dibudidaya. Jenis penelitian yang digunakan adalah R&D (Research and Development) dengan jenis model pengembangan prototyping. Hasil penelitian menunjukkan bahwa sistem otomasi dan pemantauan berbasis IoT bekerja dengan baik, dengan tingkat kesalahan pembacaan sensor suhu DHT11 dibandingkan thermometer digital berada di bawah 5% (dengan nilai error antara 0,37% hingga 3,10%). Selain itu, alat dapat mengirimkan notifikasi kepada pengguna ketika suhu atau kelembapan berada di luar rentang yang telah ditentukan, sehingga membantu menjaga kondisi optimal bagi pertumbuhan jamur.

This research focuses on developing an IoT-based automatic irrigation control system for stevia plants to optimize plant growth and water usage efficiency. The system integrates ESP32 microcontroller with soil moisture sensors, DS18B20 temperature sensors, and DHT11 environmental sensors for comprehensive monitoring. Using Research and Development (R&D) methodology with an experimental approach, the system was designed and implemented to automatically control irrigation based on soil moisture levels. The results demonstrate that the system successfully maintains optimal soil moisture by activating the pump when moisture levels fall below 38% and deactivating it above 40%. Real-time monitoring through the Blynk platform enables remote observation and control of environmental parameters. The integration of multiple sensors with IoT technology provides an efficient solution for stevia plant irrigation management, offering potential applications in smart agriculture.

Gas Sulfur adalah salah satu polutan berbahaya bagi manusia. Akibat utama polutan (SO2) terhadap manusia adalah terjadinya iritasi pada sistem pernafasan. Terutama kesehatan bagi usia lanjut dan penderita yang mengalami penyakit kronis pada sistem pernafasan dan kardiovaskular yang sangat sensitif jika kontak dengan (SO2). Sehingga pada penelitian ini perlu adanya sebuah rancang sistem monitoring kadar gas sulfur dioksida (SO2), suhu dan kelembaban pada ruangan. Sistem monitoring ini menggunakan sensor MQ-136 sebagai pendeteksi kadar gas sulfur dioksida (SO2) dengan satuan ppm dan sensor DHT11 sebagai pendeteksi suhu dan kelembapan pada ruangan. Hasil pembacaan kedua sensor tersebut akan diproses melalui Modul Wifi ESP32 dengan mempunyai output Aplikasi BLYNK dan Google Spreadsheet. Sementara output Exhaust Fan menyala sesuai dengan ketentuan Fuzzy Logic Mamdani.

As time goes by, the rapid development of technology has brought various conveniences to people's daily activities.  An example of the continuation of technology is microcontrollers and electronic devices that can be connected to the network. One of them is the industrial sector in the PLTS plant at the 7 Mwp On-Grid PLTS Pt. Infrastructure Terbarukan Cemerlang Sengkol which has PV Box generating equipment that requires temperature and humidity control to determine the cause of corrosion that occurs in the PV Box.This study is intended as a solution in monitoring PV Box generating equipment. This technology development uses the Internet of Things (IoT) which combines the physical and virtual worlds. In this research, the method used is the experimental measurement method, making the system created more real and detailed. In research using DHT11 equipment which has the advantage of being able to estimate temperature and humidity. NodeMCU ESP32 as a microcontroller connected to the blynk platform via the internet functions to manage hardware, show evidence of sensors, secure data, depict data, and others. The results of the research on designing a temperature and humidity monitoring system at the 7 Mwp On-Grid PLTS Pt. Infrastructure Terbarukan Cemerlang Sengkol were successfully created and produced positive effects by being monitored using the blynk platform. This research was carried out in real time using a cell phone wherever you are. This research shows that temperature measurements from the DHT11 sensor obtained an average temperature of 31.78%, while the average humidity value was 85.96%, which indicates that the room being measured had high humidity. By considering these two findings, it can be concluded that the cause of corrosion in the room is high humidity and redox reactions from various substances in the environment.

Honey is a natural liquid that contains a lot of sugar produced by bees (genus Apis) from flower nectar and has a sweet taste. Honey contains a multitude of benefits that are good for the body, including being a source of nutrients, improving body metabolism, anti-bacterial, and others. The purpose of designing the Honey Harvest Monitoring System with ARDUINO-based IOT is to help breeders maximize honey harvesting results. This study aims to design an intelligent system for controlling the temperature in bee hives, humidity in bee hives, and monitoring honey yields, measuring the temperature and humidity of the storage room using DHT 11 sensors, and monitoring honey harvest time using Load Cell sensors. The temperature and humidity controller in the cage uses a blower/fan. Sensor data will be processed using the Wemos D1 R1 microcontroller and then sent to an Android application via the internet network using a real-time Firebase database so that it can be accessed anywhere and anytime. The way this system works is that if the room temperature is >38 degrees Celsius, the blower/fan will turn on, and will turn off if the temperature is 40%, the artificial window will open and will close if the humidity is

Kondisi pandemi COVID-19 tahun selama kurang lebih 2 tahun menjadi pembelajaran bagi Indonesia khususnya di bidang kesehatan. Problematika di bidang kesehatan semakin terlihat jelas di era pandemi COVID-19 ini. Suhu tubuh normal berkisar antar 36,5⁰C - 37,5⁰C dan bila melebihi 38,5⁰C maka ada indikasi terinfeksi covid-19 yang kemudian akan diarahkan untuk isolasi baik mandiri atau di tempat yang telah disediakan. Tujuan adanya ruang isolasi adalah untuk mengendalikan penyebaran penyakit menular yang bisa mewabah. Ruang isolasi adalah ruangan khusus, orang-orang yang bisa masuk ke ruangan ini juga sangat terbatas. Mengingat di ruang isolasi tidak bisa sembarangan keluar masuk, untuk itu dikembangkanlah sistem monitoring yang mampu memantau beberapa parameter yang dibutuhkan agar ruangan tersebut memenuhi standar operasional prosedur. Salah satunya adalah pengelolaan tata udara yang harus dijaga yaitu suhu ruangan dan kelembapan ruangan. Udara dalam ruangan dan kontaminan dalam ruangan minimal 6x pertukaran udara perjam dengan suhu ruangan 24 - 26 C dan kelembaban relatif 40 - 60%. Berdasarkan permasalahan diatas penulis ingin menerapkan Fuzzy logic metode Mamdani pada sistem monitoring suhu dan kelembapan ruangan pasien isolasi Covid-19 berabsis IOT ( Internet of Things ). Hal ini tentunya sangat membantu berbagai pihak mulai perorangan, hingga lembaga kesehatan utamanya rumah sakit umum. Dari pengujian metode Fuzzy Logic tersebut diambil 10 data yang dibandingkan nilainya dengan Matlab, dapat dihasilkan rata-rata error output PWM sebesar 0.1%. Bedasarkan pengujian metode black box yang dilakukan dapat diketahui tampilan sistem sesuai dengan tampilan yang diharapkan, dengan persentase kesesuaian 100%. Untuk pengujian fungsional dapat diketahui tampilan website dapat berfungsi dengan baik pada browser Opera, Chrome, dan juga Microsoft Edge.

Jamur tiram (Pleurotus ostreatus) merupakan komoditas pangan yang sangat diminati masyarakat selain kandungan nutrisinya yang tinggi jamur tiram juga dapat diolah menjadi berbagai ragam makanan, Jamur tiram tumbuh baik pada temperatur 16 - 30°C dan kelembaban relatif 80 – 95%, Intensitas cahaya yang optimum bagi jamur tiram yaitu intensitas cahaya rendah, atau bahkan tanpa adanya cahaya. Akan tetapi, pada saat fase tubuh buah dewasa jamur tiram tidak dapat tumbuh pada kondisi cahaya gelap, melainkan dapat tumbuh dengan optimal pada lingkungan yang agak terang. Menyikapi masalah diatas maka dari itu penulis ingin mencoba melakukan percobaan penelitian dengan menerapkan pencahayaan dalam ruangan (box) dengan tiga jenis warna lampu yaitu merah (Red), hijau (green) dan biru (blue). dan perlu adanya suatu alat yang dapat melakukan monitoring, serta pendataaan pertumbuhan tanaman jamur tiram yang kemudian akan diambil datasetnya. Alat monitoring dan pendataan secara realtime dengan menggunakan multi sensor berbasis arduino untuk pendataan pertumbuhan jamur tiram ini dibuat sistem aplikasi android sebagai media untuk pemantauanya, data yang ditampilkan di aplikasi monitoring adalah hasil pembacaan dari beberapa sensor yang dipakai antara lain dari sensor load cell, sensor ultrasonik, serta sensor LDR dan sensor DHT11, Sistem monitoring dan pendataan multi sensor ini juga memiliki fitur untuk melakukan penyimpanan data, hasil data disimpan di penyimpanan internal smartphone, sehingga dari data tersebut dapat digunakan sebagai bahan untuk mengambil keputusan dari obyek yang sedang dimonitoring tersebut.