Publication Search

The infrared detector (or IR detector) is an optoelectronic component and represents the core element of gas analyzers, flame sensors, devices of spectral analysis, as well as non-contact temperature measurement. pyroelectric infrared detectors work with  stabilization time  in a wide operating temperature range (-55 ... 85) °C, capable of measuring the slightest amounts of infrared radiation (as little as a fraction of a nW) with wavelengths between 1 µm and > 25 µm. The difference of the good pyroelectric or No good (NG) devices shown by graph of voltage offset operating that can check by manual using Digital Multi Meter or semi auto by using microcontroller One of importance measuring of IRD sensors  is Offset Voltage, stabilization of offset voltage indicate the sensor is stable with certain level value. Stabilization value measurement during measuring time means the average value not so much different with fluctuation value.  10 bit ADC on Atmega 328 that main microcontroller on Arduino Uno is capable to measure the Offset Voltage of IRD sensor and check the measurement values is within specification of IRD sensor.

The purpose of this thesis is to produce tangible results in providing comfort or convenience in controlling electrical appliances, including turning on or off lights at home and controlling other electrical appliances. The method used in making the Design of Control System for Electrical Equipment Using Bluetooth Based on the Atmega 328 Microcontroller is a prototype. This research method consists of several stages, library research, analytical methods, design and implementation methods. The results achieved are reducing the number of fires due to electrical short circuits and increasing aspects of comfort and convenience for users as well as people with disabilities and the elderly, who find it difficult to stand or to reach lights and the implementation of infrastructure devices, where a series of these tools can work after bluetooth devices are available in the community. android smartphones. connected to the bluetooth module connected to the arduino microcontroller. Basically, using the principle of this tool, the user must be able to operate a smartphone based on the Android operating system. The conclusion is that this equipment has been tested and can be used as a controller of power tools with a lightweight android smartphone via a Bluetooth connection without having to press the switch button.