Publication Search

Advances in information technology have driven the transformation of banking services towards digitalization through mobile banking. Bank Central Asia (BCA), one of the largest private banks in Indonesia, offers m-BCA services to facilitate quick, practical, and efficient customer transactions. However, issues such as delayed notifications, system disruptions, and login problems still exist. This study aims to evaluate m-BCA user satisfaction using the PIECES Framework, which consists of six dimensions: Performance, Information, Economy, Control and Security, Efficiency, and Service. A descriptive quantitative approach was used, with a questionnaire distributed to 105 active m-BCA users in South Jakarta. Data were analyzed using mean values to assess satisfaction levels for each dimension, and validity and reliability tests were conducted. The results showed average scores of 4.02 for Performance, 4.08 for Information, 4.08 for Economy, 4.18 for Control and Security, 4.20 for Efficiency, and 4.09 for Service. The overall score of 4.10 falls into the "Satisfied" category. The highest score was for Efficiency, indicating strong support for users’ banking activities, while the Performance dimension scored lower, suggesting room for improvement. Overall, users are satisfied with m-BCA, but system performance improvements are needed for service stability and sustained satisfaction.

This study aims to formulate a Blue Ocean Strategy to enhance business competitiveness through a SWOT analysis approach. The research was conducted using a descriptive qualitative method. Primary data were obtained through interviews with competent parties to identify the internal and external factors of the business, while questionnaires were used as supporting data to capture respondents’ perceptions of the identified factors. The interview results served as the basis for developing the IFAS and EFAS matrices to determine the business position within the SWOT matrix. Furthermore, the SWOT analysis results were used to formulate alternative strategies aimed at creating new value in line with the Blue Ocean Strategy concept. The questionnaire results indicate that respondents’ perceptions tend to support the internal and external factors identified through interviews, thereby strengthening the analytical findings. Based on the results, it can be concluded that formulating a Blue Ocean Strategy through SWOT analysis provides a more innovative and competitive strategic direction. The resulting strategies are expected to help businesses create sustainable competitive advantages and avoid direct competition in saturated markets.

This study aims to analyze the effect of information technology (IT)-based learning media on improving students' academic performance. With the advancement of digital technology, the use of IT-based media such as interactive presentations, educational videos, Learning Management Systems (LMS), and online quiz applications has become part of modern teaching strategies. This study uses a quantitative approach with a quasi-experimental method. The subjects of the study were secondary school students divided into experimental and control groups. The instruments used include learning achievement tests to measure academic performance and observation sheets to assess the implementation of IT media usage. Data were analyzed using t-tests and simple regression analysis. The results show a significant difference in academic performance between students who used IT-based learning media and those who used conventional methods. The experimental group showed a higher average score compared to the control group. These findings indicate that the use of IT-based learning media, when planned and implemented systematically, can improve students' motivation, engagement, and understanding of learning materials. Therefore, the integration of information technology into the learning process is recommended as an innovative strategy to enhance the quality of education.

This study aims to redesign the raw material yarn warehouse layout at PT. XYZ using the Class Based Storage method to improve storage and retrieval efficiency. The main problem identified in the warehouse is random item placement, resulting in relatively long retrieval times of approximately 10–15 minutes per pallet. This research applies a descriptive quantitative approach using a case study method. The data used consists of inbound, outbound, and inventory records of yarn raw materials from November 2024 to April 2025. The analysis was conducted using the FSN (Fast Moving, Slow Moving, and Non-Moving) method through the calculation of consumption rate and average stay, combined with ABC classification to determine storage priority. The results show that 9 types of yarn are classified as Class A, 11 types as Class B, and 11 types as Class C. Based on this classification, a new warehouse layout was designed by placing Class A items near the input-output area, Class B items in the middle area, and Class C items in the back area of the warehouse, thereby improving storage efficiency and reducing retrieval time.

The increasing integration of internet technology in educational institutions requires structured network governance to ensure that digital resources support academic activities effectively. Unrestricted access to online platforms often leads to non-academic usage such as online gaming and social media engagement during instructional hours, which may reduce learning concentration and degrade network performance. This research develops and evaluates a network access control simulation using a MikroTik RouterBoard RB951Ui-2HnD device. The system applies firewall filtering mechanisms, hotspot-based authentication, and bandwidth allocation strategies through Simple Queue configuration. Network segmentation is implemented to differentiate teacher and student access privileges. The study adopts a Research and Development (R&D) approach to design, configure, test, and evaluate the proposed system. Testing results indicate that the firewall configuration successfully restricts access to selected online games (Mobile Legends, Clash of Clans, Roblox) and social media platforms (YouTube, TikTok, Shopee, Instagram, Telegram). Furthermore, bandwidth management demonstrates effective traffic prioritization, ensuring more stable allocation for teacher accounts in accordance with configured maximum limits. The findings confirm that structured firewall and bandwidth policies can improve network discipline, enhance performance stability, and support a controlled digital learning environment in schools.

This study aims to evaluate the level of user satisfaction with the user interface of the Academic Information System (SIAKAD) at Esa Unggul University using the End User Computing Satisfaction (EUCS) method. This method assesses user satisfaction based on five key dimensions: content, accuracy, format, ease of use, and timeliness. The study employed a quantitative descriptive approach by distributing questionnaires to active Esa Unggul University students as primary system users. The collected data were analyzed using SPSS software to test validity, reliability, and the relationships between variables that influence user satisfaction with the SIAKAD interface. The results show that, in general, users are quite satisfied with the SIAKAD interface, particularly in the ease of use and accuracy dimensions, which obtained the highest scores. This indicates that usability and information accuracy are the dominant factors in creating a positive user experience. However, the timeliness and content dimensions still require further improvement, as they were rated as less optimal in providing fast and comprehensive information. These findings highlight the importance of an intuitive, efficient, and informative interface design in enhancing user satisfaction. This research is expected to serve as a reference for Esa Unggul University in developing and improving its Academic Information System to become more effective, efficient, and user-friendly. Evaluating user satisfaction through the EUCS approach provides valuable insights for system developers to refine the interface, improve information quality, and enhance system responsiveness. Thus, the results of this study are expected to contribute to improving academic service quality and supporting the digitalization of education at Esa Unggul University.

Corn is a strategic agricultural commodity that contributes significantly to food security and economic development. Cilacap Regency, particularly Jeruklegi District, has considerable potential for corn production. However, the Wanasri Women Farmers Group (KWT) in Jeruklegi Wetan Village has not yet optimized corn utilization due to production and marketing constraints, resulting in limited value addition.This study aims to analyze the value added and production process efficiency of corn wonton chips as a healthy processed product to support the economic independence of women farmers. The study applies the Hayami value-added method and descriptive analysis to assess production efficiency. The findings show that processing 1 kg of corn into 15 packages of corn wonton chips generates an added value of IDR 98,500, with a value-added ratio of 54.72% and a profit rate of 49.16%. These results indicate that corn processing provides substantial economic benefits and is financially feasible. Improving production efficiency and cost control can further enhance profitability and sustainability. Overall, value-added processing of local corn has strong potential to increase income and strengthen the economic resilience of women farmers’ groups.

Starfruit (Averrhoa bilimbi L.), commonly known in Indonesia as belimbing wuluh, is widely used as a natural acid in traditional cuisine. It is often processed into dried sour starfruit (asam sunti), which can last 1–1.5 years. However, traditional sun-drying methods are inefficient due to weather dependency, long processing times, and inconsistent product quality and color. This study aims to design and develop a tunnel-type starfruit dryer equipped with a blower system and heat control based on the Arduino Mega 2560. The research employs a quantitative method to evaluate tool performance. The dryer is cylindrical and supported by key components, including LPG gas as a heat source, a blower for air circulation, and a drum holder. Drying is conducted in six stages, each lasting 120 minutes, totaling 12 hours to achieve optimal dryness. Temperature monitoring at three points (T1, T2, T3) uses a MAX6675 sensor with a thermocouple connected to the Arduino Mega 2560, while weight measurement is done manually. Results indicate the tool functions effectively. A denser drying chamber and proper blower installation are recommended to ensure even heat distribution and improved drying efficiency for community use.

The computer laboratory is an essential facility in higher education that requires efficient management of usage and environmental conditions to support the teaching and learning process. However, laboratory management at the Kalimantan Business and Technology Institute is still carried out manually, including scheduling, room condition monitoring, and report creation, which is prone to errors and time-consuming. This study aims to develop an Internet of Things (IoT)-based laboratory monitoring system prototype to improve the effectiveness of computer laboratory management. The approach used is Research and Development (R&D) with a prototype development model, allowing for design adjustments based on user feedback iteratively. Data were collected through observations, interviews, and document studies related to laboratory conditions and analyzed to determine the main system features, such as temperature and humidity monitoring, scheduling, and report generation. The results of the study show that the developed prototype can structure the laboratory workflow, provide real-time monitoring, facilitate schedule management, and simplify report preparation. This prototype is expected to serve as a foundation for developing a more comprehensive application, improving data accuracy, time efficiency, and the quality of laboratory management.

The most valuable asset of a company is its employees due to their performance. The performance of PT. XYZ in recent times has tended to decline due to the heavy workload on Group A non-organic employees, which has resulted in reduced employee productivity. This study aims to determine the workload value and the level of fatigue experienced by Group A non-organic employees at PT. XYZ using the SOFI and SDS methods. It also aims to recommend efforts to reduce the workload and stress levels for Group A non-organic employees at PT. XYZ. This study is a descriptive qualitative research using interview methods and distributing questionnaires to 18 non-organic employees of group A. The results of the study indicate that the analysis of workload (fatigue) measurement using the SOFI method obtained a physical fatigue level among non-organic employees of group A at PT. XYZ with an average total score of 4.61, which means that the employees experienced a workload (fatigue) level categorized as moderate. Meanwhile, the analysis of work stress measurement using the SDS method obtained an average total score of 14, indicating that the stress level among non-organic employees of group A at PT. XYZ falls in the moderate category.

This study aims to analyze and design the electrical installation requirements for a prototype residential building with dimensions of 11 × 19 meters. The research applies a technical calculation approach based on lighting standards, air conditioning capacity estimation, load analysis, and electrical protection planning. Lighting requirements were determined using the lumen method by considering room area, illumination standards, coefficient of utilization, and light loss factor. Air conditioning capacity was calculated based on room area and standard cooling load values in BTU/hr. Furthermore, total electrical loads were analyzed to determine installed capacity, nominal current, Miniature Circuit Breaker (MCB) ratings, and appropriate cable cross-sectional areas with safety factors applied. The results indicate that proper load grouping, appropriate MCB selection, and correct cable sizing significantly enhance system safety and reliability. The study provides a systematic planning model for residential electrical installations that meets safety, efficiency, and technical standards, and can serve as a reference for similar residential building designs.

Pyrolysis is a biomass conversion method into fuel through heating at high temperatures under oxygen-limited conditions. The main factors influencing the pyrolysis process include temperature, residence time, pressure, particle size, reactor design, and the type of pyrolysis employed. This study aims to design an auger-type fast pyrolysis system based on previous research. The design and modeling of the fast pyrolysis equipment were carried out using Autodesk Inventor 2021 software. Based on the calculation and design results, a fast pyrolysis reactor with a multi-stage configuration and a capacity of 5.2 kg was developed. The system consists of a three-stage reactor made of Stainless Steel 304. The reactor is equipped with a screw conveyor for material transport, which is driven by an electric motor. Biomass heating inside the reactor is provided by a clamp heater with an electrical power requirement of 611 W, while biomass cooling is performed using a condenser with a cooling water capacity of 15.586 liters. Based on the structural simulation results, the maximum von Mises stress obtained was 35.4 MPa, the maximum displacement was 0.0528 mm, and the safety factor was 6.07 under loading conditions including an internal reactor pressure of 0.32 MPa, a torsional moment of 1,130 kg·mm, and an operating temperature of 700 °C. These values are within the allowable limits of the material, indicating that the designed reactor is structurally safe and feasible for use.

This study investigates the effect of adding onion peel extract as a corrosion inhibitor on the corrosion rate and hardness of radiator pipes. The research employed an experimental method with inhibitor concentrations of 0 ppm, 100 ppm, 200 ppm, and 300 ppm. Corrosion rate testing was conducted using electrochemical methods, while hardness was measured using the Vickers method. The findings reveal that the addition of onion peel extract at a concentration of 300 ppm significantly reduced the corrosion rate to 0.081 mmpy, achieving an inhibition efficiency of 56.45%. Furthermore, the same concentration enhanced the surface hardness of radiator pipes to 255.403 Kgf/mm². These results demonstrate that onion peel extract has strong potential as an eco-friendly organic corrosion inhibitor. Its dual function in reducing corrosion and improving mechanical properties highlights its applicability in radiator pipe protection and sustainable engineering practices. The study contributes to the development of natural inhibitors as alternatives to synthetic chemicals, aligning with environmental preservation efforts and advancing green technology in material protection.

In today's digital landscape, rapid and accurate access to information has become a fundamental requirement for educational institutions. Previously, SMP Swasta Karya Bhakti Medan relied heavily on conventional methods for disseminating information, such as verbal communication or limited printed media. This situation frequently resulted in delays in delivering news to guardians and limited the promotional reach to the broader community. Addressing these issues, this internship project focuses on the design and development of a school profile website as a solution for information digitalization. The system development process involved several stages, including field data collection, user-friendly interface design, and the coding implementation phase. The website is designed to host essential information, ranging from the institutional profile, vision and mission, and facilities, to student activity documentation. To ensure optimal accessibility, the site is hosted using the Netlify service, allowing for continuous online access. The final outcome of this project is a responsive and easily accessible digital information portal. The presence of this website is expected to enhance the school's image and facilitate parents and prospective students in obtaining valid information regarding SMP Swasta Karya Bhakti Medan without distance or time constraints.

The rapid expansion of internet usage has led to a significant increase in cybersecurity threats, particularly phishing attacks delivered through malicious links. Phishing links are designed to imitate legitimate websites in order to deceive users and steal sensitive information. This study presents the implementation of a phishing link detection website based on SSL validation and URL scoring mechanisms. The proposed system integrates heuristic-based URL analysis with real-time SSL certificate validation obtained through the SSL handshake process. Digital certificates are verified using RSA-based digital signature verification issued by trusted Certificate Authorities (CAs). In addition, the SHA-256 hash algorithm is employed to generate certificate fingerprints and URL hashes to ensure data integrity and uniqueness. The system also evaluates HTTPS usage, domain and certificate consistency, certificate validity period, and RSA public key strength. All validation results are processed using a URL scoring system to generate a security score ranging from 0 to 100, which classifies links into safe, suspicious, or dangerous categories. Experimental results demonstrate that the proposed website is capable of effectively identifying phishing indicators and providing transparent cryptographic evidence in real time. This approach can assist users in making informed decisions and improving protection against phishing threats in web environments.

The development of automation and robotics technology has driven innovation in various industrial fields, particularly in automatic sorting systems. Manual sorting processes often lead to inefficiencies and human errors, creating the need for an automatic, fast, and accurate system. This research employs a qualitative method which includes experimentation, testing, and system documentation. The system is designed as a robotic arm for sorting objects based on color, utilizing a TCS3200 color sensor and an ESP32 microcontroller. An ultrasonic sensor detects the presence of objects, while the sorting results are displayed through a real-time web monitoring system. The test results show that the prototype successfully sorts four primary colors (red, green, blue, and yellow) with a high level of accuracy. This research is expected to serve as a reference for the development of automation systems and robotics learning tools in both educational and industrial applications. In addition, this research also contributes to the development of technology that can increase efficiency and accuracy in industrial production processes and provide more environmentally friendly solutions by reducing the need for manual labor.

The development of multimedia-based interactive games requires a system capable of effectively managing game logic, character behavior, and the integration of visual and animation elements. This study aims to implement GDScript in the development of a 2D RPG game using the Godot Engine. The research method was carried out through the design of scene and node structures, the implementation of game logic using GDScript, and the application of Finite State Machine (FSM) to regulate enemy behavior. GDScript is used to control character movement, animation systems, and interactions between players and objects in the game. The implementation of FSM allows enemies to have dynamic behavior through state settings such as idle and wander. Functional testing results show that the game system can run according to the design and is capable of producing responsive interactions. In addition, the use of modular architecture in the Godot Engine facilitates system development and maintenance. Based on the research results, the Godot Engine and GDScript are considered effective for developing multimedia-based interactive games.

Effective information system design requires a clear and comprehensive understanding of the desired ideal system conditions in order to support organizational objectives. The TO-BE approach is a business process modeling method that describes future system conditions as a conceptual and strategic basis for improving existing AS-IS conditions. This study aims to analyze the effect of implementing the TO-BE approach in information system design on the clarity of system requirements, overall process efficiency, and the quality of system design outcomes. The research method used is descriptive-analytical research with a qualitative approach, employing data collection techniques such as literature review, direct observation, and in-depth analysis of system design documents. The results show that implementing the TO-BE approach in information system design provides a more structured and systematic overview of business processes, minimizes mismatches between system functionality and user needs, and improves the effectiveness and efficiency of business processes. Furthermore, the TO-BE approach assists system developers and analysts in designing system solutions that are aligned with organizational goals, operational requirements, and user expectations. Thus, implementing the TO-BE approach positively impacts the overall quality of information system design and is recommended as a critical and essential step in information system development initiatives.

This study aims to analyze the application of personnel management information systems at the West Sumba Regency Personnel and Human Resources Development Agency (BKPSDM). The main focus of the research is to assess how an integrated information system is able to produce up-to-date, accurate, and can support the decision-making process in personnel policy. An integrated information system is expected to facilitate employee data management, improve administrative efficiency, and strengthen transparency in human resource management. The research method uses a qualitative approach with case studies, through interviews with relevant officials, direct observation, and analysis of relevant documents. The results of the study show that the implementation of an integrated personnel management information system has a positive impact in the form of accelerating administrative processes, reducing data input errors, and facilitating access to information for interested parties. However, the research also found a number of challenges, such as the limitation of human resources trained in the use of technology systems and infrastructure that is not yet optimal. This study concludes that strengthening human resource capacity and increasing infrastructure support is a strategic step to optimize the personnel management information system. The research recommendations are expected to be a reference for the West Sumba Regency BKPSDM and other government agencies in developing a more effective and sustainable information system.

Information technology (IT) infrastructure planning plays a strategic role in supporting organizational performance and achieving business objectives. However, many organizations experience misalignment between IT infrastructure planning and organizational needs, leading to inefficiencies, limited system integration, and suboptimal utilization of IT investments (Maulana, 2024; Njanka et al., 2025). This study aims to analyze the suitability of IT infrastructure planning with organizational needs using a quantitative approach. The research framework integrates the Strategic Alignment Model (SAM), Strategic Alignment Maturity Model (SAMM), and COBIT 2019 governance principles. Data were collected through a structured questionnaire distributed to IT managers and system users. A total of 85 valid responses were analyzed using descriptive statistics and gap analysis. The results indicate that IT infrastructure planning is moderately aligned with organizational needs, particularly in supporting operational activities. Nevertheless, significant gaps were identified in system integration, scalability, and long-term infrastructure planning. These findings highlight the importance of continuous evaluation and governance-based IT planning to enhance alignment and ensure sustainable organizational performance.