Publication Search

Miwon Indonesia is one of the companies that started as a company in 1973, the company finally changed the company's name with PT. Daesang Ingredients Indonesia The research method used is Preventive Maintenance, in this study researchers analyzed the time between laminating machine damage to the Chamber Box Heater component, the data taken was the Laminating machine down time data in July – December 2022 The results of analysis and data processing showed that the level of component reliability, namely for the chamber box heater component of 0.5892 occurred on day 5. And while the press roll rewinder component obtained a reliability level of 0.5925 on day 7. And the results of the calculation of costs before preventive maintenance are obtained at a cost of Rp. 47,953,572 per 6 months and costs after preventive maintenance are obtained at Rp. 29,677,876 per 6 months. With a difference of Rp.18,285,696. From the results of preventive maintenance costs, it can reduce maintenance costs at PT. Daesang Ingredients Indonesia than before preventive maintenance calculations are carried out.

Building as an educational service requires maintenance so that the condition of the building remains fit for function. Without building maintenance activities, the function of a building will experience degradation over time. In this study, researchers focused on research on the Main Building of the Indragiri High School of Technology which was more than 10 years old to analyze the level of damage to the building and estimate the cost of maintaining the building. In the calculation that the level of damage is calculated based on the Regulation of the Minister of Public Works Number 24/PRT/M/2008 concerning Guidelines for the Maintenance and Care of Buildings, from the sum of all the components, 89.0% is categorized as Severely Damaged with the greatest damage in structural damage. The estimated maintenance cost for the main building of the Indragiri High School of Technology is Rp. 467,929,000.00 including Four Hundred Sixty Seven Nine Hundred Twenty Nine Thousand Rupiah    

Problems related to labor or labor are problems that often occur in developing countries, one of which is Indonesia. Termination of Employment (PHK) is something that is feared by workers due to economic conditions which have an impact on companies that have to go out of business and this results in unilateral layoffs by the company. One of the implementing regulations for the Job Creation Law that has been issued is Government Regulation Number 35 of 2021 concerning Work Agreements for Specific Periods, Outsourcing, Working Time, Work Relations and Rest Periods, and Termination of Employment (PHK). Article 15 states that employers are required to provide compensation money to workers or laborers whose employment relationship is based on a Specific Time Work Agreement (PKWT). Compensation money as referred to in Article 15 paragraph (1) PP Number 35 of 2021, is given to workers/laborers who have had continuous service for at least 1 (one) month. Compensation is everything that is received by workers, both physical and non-physical. The form of compensation given can be in the form of money or goods that are given directly or indirectly. Regulations regarding compensation are regulated in Law Number 13 of 2003 concerning Manpower and Government Regulation Number 35 of 2021 concerning Work Agreements for Specific Periods, Outsourcing, Working Time and Break Time and Termination of Employment. The compensation given by Hotel X to Mrs. S is in accordance with Article 16 of Government Regulation Number 35 of 2021 concerning Work Agreements for Specific Time, Outsourcing, Working Time and Break Time and Termination of Employment. Where Mrs. S demanded compensation from Hotel X with the calculation of the remaining salary withheld due to covid reasons, overtime pay, and leave money.

CV. Daya Patra Sentosa is a company that produces paving. Of the several types of products available, T6 paving, T8 paving, and hexagon paving are the types of products with the most demand. CV. Daya Patra Sentosa has problems in production scheduling, namely there are frequent delays in product delivery because they do not yet have an optimal production scheduling system and still use FCFS rules. The purpose of this study is to provide alternative production scheduling suggestions in order to obtain optimal production processing time and prevent delays in product delivery. These problems are solved by the method of Campbell Dudek Smith and Palmer. These two methods are compared to find out the production process time and get the optimal choice of production time. The calculation results show that the application of the method applied by the company, namely FCFS is 12342.9 minutes, the Campbell Dudek Smith method is 11953.9 minutes, and the Palmer method is 12023 minutes. It can be seen that the Campbell-Dudek-Smith method provides a shorter time of 389 minutes (3.15%) to the company's schedule.

Liquidity issues are important in maintaining the smooth operation of the company as well as in short-term and emergency needs as well as the growth function (investment) to develop owned assets in accordance with the expectations desired by the company. Information about budgeted cash flows can produce relevant information, because from this cash flow it can be known the need for the company's operations from the source of the recipient. Given the large number of cash receipts and disbursements managed, a list is needed that contains all cash inflows and cash outflows presented in the form of a cash flow statement. The results of the discussion concluded that cash management plays a role in the liquidity of CV. PSP Group, this can be proven from the results of research by calculating liquidity with the Current Ratio, Cash Ratio, and Quick Ratio, where the calculation results for 1 year, namely from January to December 2021 the calculation results for the liquidity ratio are > 1 as much as 75%, where with the existence of good cash management will have a positive impact, which means the application of cash management at CV. PSP Group is better, on company liquidity and financial conditions with a liquidity ratio of < 1 of 25%, which means that future conditions need to be improved in cash management to make it even better because there are still conditions that cash management in 2021 is not liquid or in the sense that CV. From July to September, the PSP Group was unable to pay its current debts in a timely manner, which resulted in obstacles to the company's payment of employee salaries and other important company expenses.

PT. Nadha Karya Utama Indonesia, a company engaged in the manufacturing service industry that produces mild steel, located on Jl. Cold Hamlet, RT 04 RW 07, Ngronggot, Kab. Nganjuk, East Java. The purpose of this study is to plan the Roll Forming machine maintenance schedule in order to minimize maintenance costs. The method used in this study is using the Preventive Maintenance method. The calculation results obtain the reliability value of each component on the Roll Forming machine, namely 0.5 for the reliability of the Roll component, 0.5 for the Gear Box component, 0.5 for the Main Engine component, 0.46 for Bearings, and 0.5 for reliability Roll Stand. Determination of maintenance time intervals is based on Peventive Maintenance on Roll components for 37 days, Gear Boxes for 108 days, Main Machinery for 108 days, Bearings for 53 days, and Roll Stands for 146 days. Based on the calculation results, the total cost of maintenance before carrying out preventive with reliability is known to be Rp. 19,340,000, after carrying out preventive calculations with reliability is Rp. 13,120,139.10, it can be seen that before and after carrying out preventive calculations there is a difference in costs of Rp. 6,219. 860.9. From these results it is known that preventive maintenance can reduce the costs incurred by PT. Nadha Karya Utama Indonesia from before the Preventive Maintenance calculations were carried out.

Promotion is a communication activity carried out by a person or company with the broader community, where the aim is to introduce something (goods/services/brands/companies) to the community and at the same time influence the wider community to buy and use the product. Purchasing decisions are a process where consumers choose and evaluate products or services, often consumers consider various things that suit their needs in the purchase decision process. Every company built by a business entity or individual is generally the same, namely, to seek as much profit as possible by increasing purchases at the company, it takes various kinds of marketing activities, one of which is to hold promotional activities for the products produced, with the existence of marketing activities. Sales promotion in each company will indirectly help increase purchases of products. This study aims to determine how much influence promotion has on purchasing decisions at the Qolsa Fashion Store. The type of research used is quantitative research. The population in this study were all consumers of the Qolsa store in the metro city. In this study, samples were taken from many as 50 respondents. Data was taken through a questionnaire method. Data processing is done with the help of Microsoft Excel. The test includes a validity test, reliability test, normality test, homogeneity test, simple linear regression test, F-test, and t-test. The results show that there is a significant positive effect of promotion on purchasing decisions. The results of this study indicate that: There is a promotion effect on purchasing decisions for clothing at the Qolsa store in 2022 with the regression equation Y = 44.324 + 0.3233 X can be seen from the results of the analysis of the calculation of the value of t-count and t-tab above, it means that it is known that t-count > t-tab can be seen in the table of t point on the 5% significant list, namely 2.65> 1.68 also the Fcount value of 4.28 is greater than Ftab = 4.04 which is 4.28> 4.04 means There is a Significant Effect of Promotion on Purchase Decisions Clothing at Qolsa Stores in Metro City in 2022.

Every toll road project development will require heavy equipment to facilitate work, one of which is rigid pavement work. Rigid pavement is a pavement construction using aggregate as raw material and using cement as a binder, so it has a relatively high level of stiffness, especially when compared to asphalt pavement (flexible pavement), so it is known and referred to as rigid pavement. The tool used for rigid work is the concrete paver, this tool is used because it is more efficient and can maintain the quality of the concrete. This study aims to be able to determine the productivity of the concrete paver heavy equipment. The data used is in the form of primary data obtained by observation, interviews and field data as well as manual calculations. The results obtained are the productivity of concrete paver heavy equipment with rigid work along 180 m wide 6, 7 is 43,5 while the ready mix productivity is 42.8 m³/hour with a production time of 6 hours 20 minutes.

Technically, heavy equipment resources are the main factor in implementing a road project. The use of heavy equipment is urgently needed in the process of accelerating the implementation of road works in accordance with predetermined targets. In this project there are several stages of work planned and implemented, one of which is earthworks. Earthworks include excavation work that requires Rock Drill Breaker heavy equipment to speed up work time. This research was conducted at the Tepus-Jerukwudel Road Development Project Phase II, Gunungkidul Regency, with the aim of knowing the work productivity of heavy equipment and knowing the time needed for heavy equipment to complete excavation work. The method used is the manual calculation method using the productivity formula, time calculation and soil excavation volume calculation to produce the effective time during the use of Rock Drill Breaker . Based on the results of productivity calculations on excavation work using a Rock Drill Breaker with an hourly production of 23.86 m3/hour, daily production of 166.9 m3/day with a time of 83 days. The results of this study indicate that good management and utilization of heavy equipment can accelerate the expected target time.

Electrical energy continues to grow over time, power plants with large capacities are the main sources of electricity in Indonesia, one of which is the Steam Power Plant (PLTU). In the field of power plants that use coal always need air during the electricity production process. This study aims 1) to determine the protection management system on the Forced Draft fan motor using GE Multilin 269 Plus, 2) Setting GE Multilin 269 Plus as protection, 3) The results of the protection in the form of Normal Motor, Alarm, and Trip conditions in the accumulation of imbalance (Unbalance) ). The method used is a quantitative research method based on analysis, taking data and then analyzing the data obtained. The results of this quantitative study regarding the Unbalance value or imbalance of the electric motor analyzed resulted in a value of 5.8% for normal conditions, 10.86% for alarm conditions on multilin and 15.50% in trip conditions or the motor had stopped. These values ​​are obtained from the results of calculations comparing negative sequence currents and positive sequence currents (In/Ip). The conclusion obtained is that the GE Multilin 269 Plus protects the electric motor from system damage by using a current sensor and through a setting point that is adjusted to the provisions of NEMA (National Electrical Manufacturers Association) with an unbalance value of more than 15% for trips, more than 10% for alarm conditions and less than 10% under normal conditions

Gramedia Digital application itself is a good innovation in the digital era now. Even though it has been used by users but there are still some obstacles or lack of information contained on the application, therefore it requires maturity and capability assessment of the application. The COBIT 5 framework is an IT audit standard that has been issued by ISACA, COBIT 5 itself has a total of 11 domains but this time the research only focuses on 5 domains namely EDM05, APO05, BAI04, DSS01, MEA01. The results of the maturity and capability level calculations from Gramedia Digital applications resulted in an average of EDM05 with a result of 2.7, APO05 with a result of 2.8, BAI04 with a result of 2.7, DSS01 with a result of 2.7, MEA01 with a result of 2.8. And the average capability generated by these domains is rounded to 3. The conclusion in this study gramedia Digital application has not met the targeted target of 4.

Information technology is a technology used to process data, including processing, obtaining, compiling, storing, manipulating data in various ways to produce relevant, accurate and timely information, which is used for personal, business and government purposes and is strategic information for decision making, in recording fixed assets for example, must be managed properly because the need for the data is frequent intensity, the number of items is not small so it is impossible to memorize, the calculation of depreciation of fixed assets of a company needs to be done at the end of every year because it will affect the book value and depreciation expense on the balance sheet and depreciation expense on fixed assets on the income statement. This depreciation calculation can also be used as a reference in the allocation to purchase new assets if the existing fixed assets can no longer be used. Obstacles in preparing depreciation reports if not resolved immediately will have a bad impact on schools, for example being late in submitting annual tax reports due to the long preparation of depreciation reports will result in schools being fined for being late in reporting the annual corporate tax return. With the accounting information system for depreciation of fixed assets, it is expected that it will facilitate officers in managing fixed asset data and depreciation reports. The new system that will be designed is web-based, so that it can be accessed at any time by interested parties and makes coordination time more effective.

Along with the development of technology, computerized systems are needed in the business world. The computer has a function as a data processing tool that will assist in completing work quickly and precisely. MA Nurul Ulum as an educational institution, especially in the implementation of payment administration activities, still uses a manual or conventional system, so there are still many shortcomings and obstacles that result in a job not being able to run properly. Therefore we need a new system, namely a computer-based payment administration system in order to be able to manage and process payment data quickly, because with computer technology both students and other parties who want to know information related to tuition payments can get it quickly. The purpose of this study is to improve the quality of service to students or parents in making tuition payments. The advantage of the system that will be made is that it provides an administrative information system for paying school fees so that it can make it easier to perform data processing and data retrieval. With an administrative information system that has been integrated in a database, it will facilitate the process of financial calculations and the existence of a Client Server-based school administrative information system will connect between sections, namely the administrative section, school treasurer, principal and head of the foundation making it easier to access financial information. school any time

Bank BJB Syariah Karawang provides Loans and KPR. Loans and mortgages are Bank products in which the Bank provides a sum of money to lend to customers, with interest giving, but only a small proportion of them know the interest calculations or called Sharia-Buying when taking credit, whether it is a home loan or vehicle. The methodologi that the authors use in the writing of this thesis include the method of identification and system design. System identification includes organization identification, system running, and problem identification. While the design of the system includes design input output, DFD, ERD, data dictionary and database. Implementation activities in this company has been running well and also has been using computer-based systems, but the technology used is still a technology of the past. In doing the calculation of home loans based on sharia has also been using a computer system. As the authors observe, there are still problems that occur such as recording the margin calculation of each customer that takes a long time, so that will result in errors in the calculation of bank margin that has been established Based on the above matters, the authors argue that to overcome these problems, it is necessary to design and implement an integrated system among related functions in a system using Microsoft Visual Studio 2008 and its database Microsoft SQL Server 2005. With the implementation of the system it is expected that the input process and calculation of margin bank syaiah needed for the future can run smoothly and on time.

PT. Biru Semesata Abadi is a company engaged in refill drinking water, one of the many drinking water companies in Semarang, and has many branches (10 branches) and one head office in Semarang (in the Bugangan area, East Semarang district), because this company has franchise system. In this case, I will discuss the presence system (presence) of employees of PT. Biru Semesta Abadi, Fatmawati Semarang branch which is still manual (presence made of paper and written by hand) and still encounters many obstacles. This desire arises because this company has difficulties in processing Presence information data, resulting in more and more hardcopy archives and makes it difficult when the company management intends to recap and re-collect data and employee attendance lists. Presence Process that already exists in the Study of PT. Blue Semesta Abadi Semarang can be said that there are still shortcomings because everything is still done manuallyThe use of the Fingerprint method in this employee Presence system application will also make this Presence system more effective and efficient because each employee will only paste one of the employee's fingerprints on the available Fingerprint device where the calculation of the employee's attendance and exit hours will be entered in the database. , then the result of inputting the employee identification number will be the reference for the employee's arrival time.

Kaliwungu Dream Building Shop is a business engaged in the sale of building materials and building-producing tools. This trading business sells various materials and tools for building buildings such as sand, cement, nails, paint, hammers and so on. The Dream Building Shop was founded by Mr. Zaenal, whose address is Jalan Raya Sekopek No. 10 Sarirejo Kaliwungu, Kendal Regency. Kaliwungu Dream Building Shop in recording sales transactions, purchases and reports - reports still use the manual method by writing them into a book, this method still requires time which is relatively old and prone to calculation errors, as a result you have to work 2 times or even many times to recalculate transactions that occur. Factors that are generally controlled are human errors that occur in cooking data and storing & maintaining paper-shaped documents, where this is very difficult to overcome. In addition, the process of searching for data or inventory is also less effective and efficient. also affect customers, even though performance according to the store is needed to satisfy customers.

Calculation of Cost of Production is one of the important aspects in carrying out business activities. Cost of Production is one of the determinants of the selling price of a product. Besides the cost of production can indicate a company's profit. But the activity of recording the cost of production at PT Semeru Karya Buana still uses a manual method that is using excel. This causes ineffectiveness in time, the resulting information will take longer because they have to look for the components one by one. Not to mention the data generated is most likely an error in the calculation. This research is intended to study the system that is already running. And later it will produce a program to calculate the cost of production as a determinant of the selling price which is implemented with the PHP programming language and MYSQL database. The calculation method uses the Job Order Costing Method where the price of the product to be given to consumers is calculated by dividing all costs incurred to produce a product by the number of orders. So the benefits of each product can be directly calculated. The more accurate the data produced, the better the company is in carrying out the buying and selling process.

Madrasah Aliyah Negeri (MAN) Purwodadi is a formal educational institution located on Jl. P. Diponegoro No. 22, the direction of Jalan Purwodadi - Solo. MAN Purwodadi as one of the Secondary Education Institutions in Purwodadi has an important role in the future, in the context of increasing the intelligence of the nation while preparing students who are faithful and devoted and possessing Science and Technology which are characteristic of their Islam. Some agencies including educational institutions in an effort to improve the image both in terms of promotion and information now, have begun to use website media that can be quickly accessed widely so as to improve the quality of service to the community. MAN Purwodadi in the current promotion and information efforts still use the method of manually explaining which will certainly take time and effort and still use print media that has limited reach and requires more costs for each print each year. MAN Purwodadi until now does not have a new alternative media in the form of a website that follows the times that if not followed up will certainly be less competitive in terms of promotion and information. Therefore, it is necessary to have new alternative media that are effective and efficient and sustainable which in addition to increasing positive value for MAN Purwodadi, can also support and cover up the weaknesses of promotional media and information that has been used before. In this study data were collected through a questionnaire method of 30 respondents in potential students using a Likert scale to find out the responses of respondents to each variable. Then do the analysis of the data obtained in the form of quantitative analysis. From the analysis obtained product information level score of 390 or 32.5%; the effective level of the product is 222 or 18.5%; and the product efficiency level of 399 or 33.25%. From the existing score indicators, if added together the results will show the extent of the feasibility of the website as a promotional media and MAN Purwodadi information. From the results of this analysis it can be concluded that Website Design as a Media Promotion and Information on MAN Purwodadi is considered "Very Effective". This is based on the calculation of the scale which states that if all the values ​​of the indicators are added up to produce a total value of 1011 where the value is between 976 - 1200 which states "Very Effective".

This study aims to determine the condition of payment of income tax of SMEs in the Region of Semarang, how therecording of tax payments and whether taking notes in case of underpayment or overpayment. The population in this studyare all taxpayers SMEs located in the County of Semarang. While the sample studied through primary data by distributingquestionnaires to be addressed, direct interviews and secondary data through the office of the Department of Cooperativesand SMEs in Semarang. The sampling technique used is convenience sampling. Data analysis was performed usingdeskretif qualitative analysis to see how the map SMEs in the Region of Semarang on the condition of their businessactivities, capital and liabilities that can be known perpajakanya deficiency or excess. The research results in graphicalform shows that the conditions of tax payments made by the respondents most of the information obtained from pertugastaxes, the taxpayer has to pay taxes on time, taxpayers will determine tax rates and the calculation. Results show that theknowledge of the taxpayer, an understanding of the tax laws and benefits are fulfilled contributed to the reporting oftaxation, and SMEs have experienced an overpayment or underpayment in tax payments, SMEs also make adjustments incase of overpayment or underpayment although the adjustment is done not in accordance with Financial AccountingStandards for Small and Medium Enterprises.Keywords: UMKM, tax payment, registration tax, tax adjustment.