Publication Search

In everyday life, trucks are used to transport goods. Not infrequently seen a lot of use of trucks that exceed the carrying capacity. Accidents on the highway include the impact caused by trucks that are overloaded or overloaded. The purpose of this study is to reduce the risk of accidents due to overloading or overloading. The truck load monitoring system aims to make it easier for truck users to see the truck load weight directly through a smartphone with an application. In addition, users can also see the excess weight of the load and there is an overweight indicator in the form of a buzzer. With this system, users can reduce the risk of accidents on their vehicles. This system consists of a load cell sensor and HX711 module as a weight detector, NodeMCU as a microcontroller and data transmission, firebase as a database, and android studio as a container for creating applications. Payload weight data can be monitored remotely or close according to the principles of the Internet of Things (IoT). The results of this study indicate that the system works well with the sensor accuracy level on the prototype truck 1 and truck prototype 2 above 95%. Writing data on firebase, reading firebase through the application and testing the buzzer has a 100% success rate percentage. There is no diference transmission delay between serial monitor and firebase.

Effectiveness is a measurement in the sense of achieving predetermined goals. Management Control System is a collection of elements that are interconnected and interact in one unit to carry out a process of achieving a main goal. Salary is part of the largest compensation provided by the agency as remuneration for its workforce. The East Medan Sub-District Office located in the Medan area, North Sumatra is one of the government agencies that functions as a community service. The research that the author conducted aims to analyze the Effectiveness of the Management Control System for Employee and Non-Employee Payrolls at the East Medan Sub-District Office. This study uses qualitative research methods that are descriptive and tend to use analysis. The data collection stage is carried out through interviews, literature studies, and there is also an addition from searching on the website. The types of data used in this study are Primary and Secondary Data. In this study, the authors analyze the existing data using a Data Processing Application (Software NVivo 11 Plus), which can be proven by a Model (Brainware Analysis). Based on the analysis carried out, it was concluded that the cause of the delay in the effectiveness of the management control system on the payroll of employees and non-employees at the East Medan Sub-district Office, namely due to lack of supervision, as well as the unequal time of payroll. Meanwhile, the obstacles that hinder the effectiveness of the management control system on employee payroll are the Delay in Reporting Periodic Salary Increases/ Promotions, and the efforts made in the various problems faced, namely reporting employee salaries or ASN (State Civil Apparatus), and updating employment data, so that they become better and more effective.

The number completeness of filling and returning medical record files on time in Indonesia is still relatively low. One of them happened at RSUD dr. R. Soedarsono, Pasuruan City. Where the results of the preliminary study showed in January, 83% incomplete medical record files and 17% complete medical records. Meanwhile, the return of medical record files was 79% late and 21% not late. The purpose of this study  to analyze the completeness of filling and delay in returning inpatient medical record files at Soedarsono Hospital, Pasuruan City. This type of research is quantitative descriptive with cross sectional approach. The sample of this study amounted 161 medical record files of BPJS patients were returned from inpatient room to the assembly unit. Data collection techniques using checklists and data analysis using univariate analysis. The results showed 28.6% (46 files) of complete medical record files, and 71.4% (115 files) were incomplete. Meanwhile, the return of medical record files was 55.9% (90 files) late and 44.1% (71 files) not late. The conclusion of this study is the completeness of filling and delay in returning medical record files at the dr.R.Soedarsono Hospital, Pasuruan City is still quite high.

PT GMP Sukses Makmur Indonesia is a company engaged in the production of Bubble Wrap (bubbled plastic). This company produces 818,680 rolls with an average monthly production of 68,223 rolls. The problem that often arises at Pt Gmp Sukses Makmur Indonesia is the high production machine delay time with a downtime of 705.43 hours and a breakdown of 663.33 hours in one year, so the engine performance is less effective. This can lead to not achieving production targets which cause losses. The purpose of this study is to determine the effectiveness of the Bubble Wrap production machine using the Overall Resource Effectiveness (ORE) measuring tool and to find the causes of the problems that have been carried out using the ORE method on Bubble Wrap production machines during the period September 2021 – August 2022. ORE is a method that is useful in measuring the effectiveness of production time by taking into account the resources which include humans, machines, materials and methods. In the ORE method there are seven factors that are measured including readiness, availability of facility, changover efficiency, availability of material, availability of manpower, performance efficiency, dan quality rate. The results of measuring machine effectiveness using the Overall Resource Effectiveness (ORE) method for Ektruder machines were 76.41%, Crushers 99.59%, Cooling 98.99%, Mixers 99.79%, and Air Compressors 98.88%. Based on the method used, it is known that in the Bubble Wrap production process, the extruder machine does not meet the ORE standard of 85%, while the influencing factors are performance efficiency and quality rate. where the value of performance efficiency and Quality rate does not meet the standard so that it affects the high value of Overall Resource Effectiveness (ORE).

A level road intersection is a meeting place for vehicle flows from various directions both towards the intersection and leaving the intersection, so that at the intersection there is the potential for vehicle conflicts to occur which are at the same time at the same point. This causes the vehicle to reduce speed. Reducing vehicle speed at intersections results in the potential for queues and delays. Evaluation of the performance of the intersection needs to be done to find out the current performance of the intersection, so that anticipatory steps can be taken so that the performance of the intersection can be maintained and maintained in good condition. In this study, an analysis of intersection performance will be carried out using the Vissim software. In this study, an assessment of the unsignalized intersection of Pasar Butun, Balikpapan City was carried out. The data needed for input into the model include traffic flow data at rush hour or peak density hours, intersection geometry data. The output or results generated by the model are intersection performance information in the form of queue length and delay time parameters  Degree of Saturation (DS) for the existing condition is 1.70 and for the next 5 years it is 2.20. Parameters of queue length and time delay in existing conditions are 33.0 m and 3.65 sec/pcu and for the next 5 years projection are 87 m and delay time is 187.s/pcu

Penelitian ini bertujuan untuk mengetahui pengaruh profitabilitas, solvabilitas, dan ukuran perusahaan terhadap audit delay. Populasi penelitian ini adalah perusahaan manufaktur sub sektor makanan dan minuman yang terdaftar di Bursa Efek Indonesia selama periode penelitian tahun 2018 – 2021 yang berjumlah sebanyak 30 perusahaan. Penelitian ini menggunakan metode purposive sampling dengan jumlah sampel sebanyak 16 perusahaan yang merupakan perusahaan manufaktur sub sektor makanan dan minuman yang terdaftar di Bursa Efek Indonesia tahun 2018 – 2021. Model analisis yang digunakan dalam penelitian ini adalah model analisis regresi linier berganda yang dilakukan dengan bantuan program komputer SPSS versi 24.0 for windows.             Hasil dari penelitian yang diperoleh secara parsial (uji-t) menunjukan bahwa nilai t-hitung profitabilitas (X1) adalah sebesar –3,423 dengan nilai signifikasi sebesar 0,001. Maka t-hitung > t-tabel (–3,423 > 2,008) dan nilai signifikasi < 0,05 (0,001 < 0,05). Berdasarkan pernyataan tersebut, dapat disimpulkan bahwa variabel profitabilitas berpengaruh negatif terhadap audit delay. Nilai t-hitung solvabilitas (X2) adalah sebesar –3,875 dengan nilai signifikasi sebesar 0,000. Maka t-hitung > t-tabel (–3,875 > 2,008) dan nilai signifikasi < 0,05 (0,000 < 0,05). Berdasarkan pernyataan tersebut, dapat disimpulkan bahwa variabel solvabilitas berpengaruh negatif terhadap audit delay. Nilai t-hitung ukuran perusahaan (X3) adalah sebesar 1,372 dengan nilai signifikasi sebesar 0,176. Maka t-hitung < t-tabel (1,372 < 2,008) dan nilai signifikasi > 0,05 (0,176 > 0,05). Berdasarkan pernyataan tersebut, dapat disimpulkan bahwa variabel ukuran perusahaan tidak berpengaruh terhadap audit delay. Nilai F-hitung sebesar 8,755 dan F-tabel sebesar 2,786 atau F-hitung > F-tabel dengan nilai signifikasi yaitu 0,000 < 0,05. Berdasarkan pernyataan tersebut, dapat disimpulkan bahwa variabel profitabilitas, solvabilitas, dan ukuran perusahaan secara simultan (uji-f) atau secara bersama – sama berpengaruh terhadap audit delay.

Companies that have been listed on the Indonesia Stock Exchange are required to submit audited annual financial reports to the public, which information will then be used by interested parties for consideration in making decisions. However, in fact not all issuers are able to publish their annual financial reports on the Indonesia Stock Exchange. So that this study aims to determine the effect of financial performance on the delay in the publication of audited financial statements mediated by audit report lag. The object of research is issuers with consumer cyclicals and consumer non-cyclicals sectors and late in publishing their audited financial reports, observation period 2017-2021. The sampling technique used purposive sampling and resulted in 46 samples. The research method used is statistical t test, path analysis and Sobel test using the help of the IBM SPSS version 26 program. The results of this study indicate that profitability has an effect on audit report lag, profitability has no effect on delays in the publication of audited financial statements, audit report lag affects delays publication of audited financial statements, and audit report lag succeeded in mediating profitability against the delay in publication of audited financial statements.

At the beginning of 2020, the world was shocked by the outbreak of a new virus, namely the coronavirus of type (SARS-CoV-2), and the disease is called Coronavirus disease 2019 (COVID-19). It is known, that the origin of this virus came from Wuhan, China, which was discovered at the end of December 2019. In this COVID-19 pandemic situation, the government made a policy of limiting almost all routine services, one example of which is maternal and neonatal health services and service facilities. other health. This causes anxiety in pregnant women so that they delay carrying out pregnancy tests. The type of this research is quantitative research, using the solving method in sample collection. While the testing in this study includes the validity test and reliability test. The findings of this study explain that the results of the reliability test also show that the data is declared reliable because of the value of Cronbach's Alpha > r table. The results showed that online media education was better than offline education in preparing the psychology of pregnant women to face childbirth in the COVID-19 era at Batuceper Health Center in 2022.

Penelitian ini bertujuan untuk mengetahui faktor-faktor yang mempengaruhi audit delay pada perusahaan manufaktur yang terdaftar di Bursa Efek Indonesia tahun 2009 s.d 2011. Adapun hipotesisyang diajukan adalah: (1) ukuran perusahaan bepengaruh secara signifikan terhadap audit delay; (2) solvabilitas berpengaruh secara signifikan terhadap audit delay; (3) profitabilitas berpengaruh secara signifikan terhadap audit delay; dan (4) ukuran perusahaan, solvabilitas dan profitabilitas berpengaruh secara simultan terhadap audit delay. Dalam penelitian ini, menggunakan sampel sebanyak 33 perusahaan yang terdaftar di Bursa Efek Indonesia (BEI). Hasil penelitian menunjukkan bahwa: (1) ukuran perusahaan berpengaruh terhadap audit delay, hasil ini dapat dibuktikan dengan nilai thitung sebesar -2,394 < ttabel sebesar 1,694 dengan nilai signifikansi sebesar 0,019 < 0,05; (2) solvabilitas tidak berpengaruh terhadap audit delay, hasil ini dapat dibuktikan dengan nilai thitung sebesar -0,659 < ttabel sebesar 1,694 dengan nilai signifikansi sebesar 0,512 > 0,05; (3) profitabilitas berpengaruh terhadap audit delay, hasil ini dapat dibuktikan dengan nilai thitung sebesar -3,313 < ttabel sebesar 1,694 dengannilai signifikansi sebesar 0,001 < 0,05; (4) ukuran perusahaan, solvabilitas, dan profitabilitas secarasimultan berpengaruh terhadap audit delay, hal ini dapat dibuktikan dengan nilai Fhitung sebesar 5,402 >Ftabel sebesar 2,922 dengan nilai signifikansi sebesar 0,002 > 0,05

Ketepatan waktu penerbitan laporan keuangan audit merupakan hal yang sangat penting khususnya bagi perusahaan-perusahaan publik yang menggunakan pasar modal sebagai salah satu sumber pendanaannya. Namun, auditor juga memerlukan waktu untuk mengumpulkan bukti-bukti kompeten yang dapat mendukung opininya, oleh karenanya dalam penerbitan laporan audit terpengaruh oleh beberapa faktor salah satu faktornya adalah ukuran perusahaan dan ukuran kantor akuntan publik. Ukuran perusahaan dan ukuran kantor akuntan publik mempunyai pengaruh secara bersama- sama terhadap audit delay pada perusahaan consumer goods yang terdaftar di Bursa Efek Indonesia tahun 2008-2010, hal ini dibuktikan berdasarkan analisis yang telah dilakukan, menunjukkan bahwa nilai Fhitung lebih besar dari Ftabel (6,880 > 3,12) dan nilai signifikansi sebesar 0,002 lebih kecil dari 0,05. Sehingga secara bersama-sama ukuran perusahaan (X1) dan ukuran kantor akuntan publik (X2) mempunyai pengaruh yang signifikan terhadap audit delay pada perusahaan consumer goods yang terdaftar di Bursa Efek Indonesia tahun 2008- 2010.  

The number of islands and the size of Indonesia's territory is a problems in building telecommunications infrastructure. VSAT satellite technology is a solution and is useful when terrestrial relations experience issues. This is because not all regions are terrestrial and can reach all islands and mainland in Indonesia. In this study, the Ku-Band VSAT was used, and the Ku-Band VSAT installation location was in Jangga Dolok Village, Lumban Julu District, Toba Samosir Regency, North Sumatra Province. The research method involves needs analysis, design, implementation, and testing. The results showed that the quality of the network obtained showed a bandwidth of 024 Kbps, 637 ms delay, 0% packet loss, 1.84 Mbit/s download throughput, and 319.18 Kbit/s uploads. The measurement analysis results in the field show that the IP Config VSAT IP can be connected to the gateway, and the connection test shows the reply response. The transmission parameter output IDU downlink SQF is 168, and the uplink is 16 Apsk 1024 K 9/10, the upload, and download measurement results show the upload results of 1.8 Mbps and 0.3 Mbps upload. All the analysis results were carried out, and it showed promising results, and the VSAT-based internet network in Jangga Dolok village was feasible to use. Keywords: VSAT Ku-Band, Topology, satellite internet.    

The background of this research focuses on the complexity of the relationship between central and local governments in the context of governance in Indonesia. One manifestation of this decentralization concept is the Local Government Implementation Report (LPPD), which is a key instrument in ensuring local government accountability. This research was motivated by problems such as lack of complete data, delays in collection, and budget limitations in the preparation of LPPD. The purpose of this study is to understand the extent of coordination of the local government of Ambon City in the practice of LPPD, as well as the supporting and inhibiting factors of the process. The method used is qualitative, with primary data from interviews and secondary data from documentation. The results show that effective coordination is a key element in the preparation of LPPD Ambon City. Key factors in coordination include effective communication, awareness of the importance of coordination, commitment from relevant parties, participant competence, and coordination incentives. This study offers recommendations to improve the effectiveness of coordination in the preparation of LPPD to support local government development goals and community welfare.

Background: The prevalence of anemia in adolescent girls in Indonesia according to WHO reaches 30%, and in the 2013 Riskesdas report recorded 18.4% of adolescents have anemia with the highest percentage in the female sex of 23.9%. Anemia in adolescents can cause delay in physical growth and behavior and emotional disorders. This study aims to determine the relationship between knowledge about anemia and nutritional status with the incidence of anemia in young women in Badung Regency. Method: This study uses analytic cross sectional design with a sample of 106 adolescent girls aged 15-18 years in high school, Badung Regency. Data collection was carried out directly on respondents in each school, for anemia data was collected by examining blood samples or hematology panels (hemograms) with an Hematology Autoanalyzer tool, data on knowledge of anemia was carried out by means of interviews using questionnaire guidelines, and nutritional status data was carried out by how to measure anthropometry (body weight and height) to get a IMT value. The analysis conducted is univariate analysis to determine the distribution and frequency of variables and bivariate analysis using the Kai-Kuadrat/Chi-Square test with the help of the SPSS program. Result: The prevalence of anemia in young women is 13.2%. Most had normal nutritional status of 77.4%, while others were categorized as abnormal / malnutrition (2.8% thin, 17.0% fat, 2.8% obese). For the level of knowledge obtained, the majority of 77.4% have a good level of knowledge in the category of anemia. Kai-Square / Chi-Square test results showed that, there was a significant relationship between knowledge about anemia and anemia in adolescent girls (95% CI: 1.93-20.77; p = 0.003). There was no significant relationship between nutritional status and anemia in adolescent girls (p = 0.301). Conclusion: Poor knowledge about anemia is associated with the incidence of anemia in young women, whereas nutritional status is not related to the incidence in young women. It is expected that related parties make a policy regarding anemia screening and education activities especially for young women. Keywords: Anemia; Knowledge; Nutritional status

Background: Chronic Kidney Failure is one of the important health problems in Indonesia and the world community. In Indonesia, according to data from Penetri (Persatuan Nefrologi Indonesia) the number of patients with kidney failure is estimated at 4500 people, but those detected suffering from terminal stage chronic kidney failure from those undergoing dialysis (hemodialysis) are only around 4 thousand - 5 thousand people. Cases of kidney failure in Indonesia are still relatively high every year, because there are still many Indonesian people not maintaining their diet and health. This means that chronic kidney failure ranks as one of the highest rates of disease causing death. The purpose of this study was to describe the level of adherence to patients with chronic kidney failure in undergoing a hemodialysis program in the hemodialysis room at Sanjiwani Hospital in Gianyar. Methods: This research is a descriptive observational type. This study uses a sampling technique that is purposive sampling with a total sample of 30 people. Results: In this study the results of the rate of compliance of CRF patients with hemodialysis were 27 respondents (90%) who were obedient and non-adherent as many as 3 respondents (10%). Thus most patients with chronic renal failure adhere to undergoing hemodialysis in the hemodialysis room of Sanjiwani Hospital in Gianyar. Conclusions: The conclusion of this study is that patients with chronic renal failure are expected to seek treatment regularly in accordance with the rules set by health workers. Delay of dialysis causes pulmonary complications, seizures, decreased consciousness, severe electrolyte disturbances, heart failure, which can cause death.Keywords : Chronic Kidney Failure; Hemodialysis, Compliance

Spinal anesthesia is a widely used anesthetic technique, particularly in surgeries involving the lower body, due to its effectiveness and safety profile. A critical component of post-spinal anesthesia recovery is the assessment of patient mobility, which can be quantitatively measured using the Bromage Score. The Bromage Score evaluates the degree of motor block, which is essential for determining when a patient can safely begin mobilizing after anesthesia. The education and implementation of the Bromage Score in hospitals are designed to enhance healthcare professionals' understanding of its significance, ensuring a more objective and systematic approach to patient recovery monitoring. This educational program involves a structured training session for healthcare workers, distribution of educational materials such as brochures and manuals, and evaluations both before and after the intervention to assess changes in knowledge and application. The results of the program indicate a significant increase in healthcare professionals’ understanding of how to apply the Bromage Score and improved quality in the monitoring of patient mobility after spinal anesthesia. The consistent and accurate implementation of the Bromage Score is crucial as it helps medical personnel determine an appropriate and safe time for patient mobilization, thus reducing the risk of complications such as falls, orthostatic hypotension, or delayed recovery. As a result, the program is recommended as a standard practice in healthcare settings to improve post-spinal anesthesia recovery outcomes and patient safety.

The Nanggulan Community Health Center is the main accredited health center, it is known that 23,000 residents of the Nanggulan sub-district are registered as members of the BPJS Health, both PBI and non-PBI. In the non-capitation BPJS Health claim process, there are obstacles that cause the submission of BPJS claims to be delayed and the disbursement of puskesmas funds taking a long time. From this background, the researcher wants to know how to submit BPJS claims at the Nanggulan Health Center. Objective  to knowing how to submit BPJS claims at the Nanggulan Health Center. Methods is to Descriptive research with a qualitative approach. Results this research is submission of non-capitation BPJS Health claims using SOPs based on the MoU. The P-Care application also plays a role because there must be a print out of P-Care which is a requirement for submitting a claim. There are obstacles found at the Nanggulan Health Center, namely claims made only for delivery claims, this is due to the lack of human resources for claims officers, incomplete files are still found, and bridging failures often occur between SIMPUS and P-Care applications which affect P-Care print outs. The submission of non-capitation BPJS Health claims at the Nanggulan Health Center has been going well but problems are still found in the completeness of the non-capitation claim files, claims made are only claims for childbirth, and SIMPUS is often not bridging with P-Care. 

Medical records are data used by hospitals that aim to support orderly administration in an effort to improve health services in hospitals. Research shows that there are still delays in providing medical record documents in hospitals spread throughout Indonesia where the provision of services that should be in accordance with SOPs is within 10 minutes, but the provision time is more than 30 minutes. Objective of This study is to examine the factors that cause delays in providing medical record reports for outpatient administration in hospitals spread across Indonesia. Methods of This study uses qualitative research with the type of literature review or literature review. This research was conducted by analyzing 15 peer-reviewed journal articles published between 2020-2021. Based on the results of the literature review above, the researcher underlines that the factors that cause the provision of medical records in several hospitals spread across Indonesia are man, material, method, machine, money factors. From the results of the literature review, researchers found factors that affect delays in the distribution of patient medical documents, namely human factors, machines, finances, materials and methods.

  Packaging is one part of the product as a whole. Packaging must be able to attract the attention of consumers. Getting the attention of consumers is very important, because if a product does not get the attention of consumers (consumer attention), then consumers will not have a picture of the product (Hine, 1995). Packaging can give an initial picture of a product, both in terms of quality and value offered. “Jenang Kudus” is a type of traditional food originating from the city of Kudus. At first it was produced in a home industry since about a century ago. Initiated by mothers as a supporter of family income, and marketed directly to local consumers in traditional markets. Because the development of this business in the future is considered quite prospective for the Kudus community, the Kudus Regency Government makes the Jenang Kudus product as the mainstay product of the Kudus Regency. Based on some of the explanations above, there are several weaknesses in the packaging design of CV jenang products. Sinar Aisyah Kudus which can cause delays in the marketing process of its products due to unattractive packaging designs. This causes a desire to increase the competitiveness of jenang sales with other companies through attractive and varied packaging designs. Due to some of these things, raises the desire of CV. Hj Siti Aisyah to redesign the product packaging according to the type of jenang product, type of taste, quantity of contents, without leaving the characteristics of the previous design.

This research was conducted at PT Fajar Indah Anindya Medan. The level of work discipline that can be seen from the delay and absence of employees. Job promotion systems that are still based on seniority are not based on work performance and employee discipline. Punishment that has not been resolute to employees. The population and sample in this study were 42 employees. The sampling technique used is saturated samples Data collection techniques are pembainigain kueisoner, interviews and documentation studies. Data analysis uses validity and reliability test, classic assumption test, multiple linear regression analysis, determinant coefficient and hypothesis testing.Conclusions in the study that simultaneous job promotion and punishment affect the work discipline of employees of PT Fajar Indah Anindya Medan. Partially, job promotion influences the work discipline of PT Fajar Indah Anindya Medan employees. Partially punishment affects the work discipline of PT Fajar Indah Anindya Medan employees. The magnitude of the determination coefficient that the adjusted R Square value is 0.502 means that promotion and punishment can explain employee discipline at 50.2% and the remaining 49.8% (100-50.2) influenced by other variables outside of this study such as: compensation, leadership and supervision of work and so on

Monitoring realizes efforts to improve the quality of health services. To obtain information on patient condition data during treatment. The monitoring process is done manually. So that it has an impact on the service and condition of the patient during treatment. The design of monitoring the patient's body temperature and heart during treatment with IoT can be controlled through the NodeMCU sensor ESP8266, MLX9014, MAX30100 sensor and Arduino IDE software program. Furthermore, it can detect the patient's temperature and the patient's heart rate during treatment. And processed by the NodeMCU ESP8266, the data from the two sensors is displayed on the SSD1306 OLED LCD and also to the smartphone of the medical officer on duty via Blynk. In order for the tool to work properly and optimally, it is necessary to adjust the pin placement so that it can work optimally. The problem of internet connection interference causes delays, resulting in a mismatch between the measurement of the test equipment and the standard tool. Data values are taken with an accuracy of 70%-93% for the MAX30100 sensor, for the temperature sensor it is close to optimal with a value that is read on a standard tool with an accuracy of 97%-99%.