Publication Search

Dian Wacana Demak Christian Kindergarten-Kindergarten School, which is one of the agencies engaged in the science and early childhood education. The type of data used is qualitative and quantitative data. The research objective is to design an effective and efficient school financial administration recording information system and design a school financial administration recording information system that has a system security that can maintain the correctness of the data. The research method used is the Borg and Gall R&D Development Research model, the Prototyping System Development Method to produce a product in the form of a prototype with 6 stages: Research and Data Collection, Planning, Initial Product Development, Product Testing, Product Revision, Final Trial. The conclusion from the results of this study is that this system can facilitate the recording of cash in and cash out transactions so that there are no mistakes in recording, users can easily present cash reports more quickly so that they can minimize recording time and recording errors, and make it easier for users to print. cash reports with accurate results so as to support and speed up decision making.

Oil palm is Indonesia's leading and prime plantation commodity. Plants whose main products consist of palm oil (CPO) and palm kernel oil (KPO) have high economic value and are one of the largest foreign exchange earners compared to other plantation commodities (Fauzi, 2012) PT. Safety Pin River Purun is a company that manages palm kernel products with the products produced there are 2 types, namely CPKO (Cruide Palm Kernel Oil) and PKM (Palm Kernel Meal). From the results of the study it was found that the prototype design was made capable of producing palm kernel assessment calculations using AHP in the assessment process, while the prototype model used was to use the prototyping model method. With this research can be beneficial for the management of PT. The Sungai Purun pin in the process of evaluating palm kernel is more effective and accurate in producing reports

The development of technology allows one to obtain other people's spatial position data. One mobile technology that utilizes spatial data as a supported factor is location-based services. The large number of employees at the PT.XYZ causes the presence of a controlled process to be under control, and even tends to be questioned. Because it takes a GPS-based presence system on android that is expected to be a solution of the problems that occur at this time. The system development method used is a six-step R&D method, consisting of: Research and information gathering, Planning, Development of initial product forms, initial field testing, major product revisions, main field testing. The final result is the prototype of the Ganesha Employee Presence System Operations. The test results on the system shows the employee attendance system can run on the android platform. The system only responds to presence based on the position of the employee's coordinates with office coordinates. Besides checking the presence process is also based on devices that have been approved in the system. 

Product distribution is a crucial element of the supply chain system that ensures the smooth flow of goods from producers to consumers at minimal cost and with high reliability. Distribution efficiency not only reduces operational costs but also improves customer satisfaction, market competitiveness, and business sustainability. In the context of Micro, Small, and Medium Enterprises (MSMEs), distribution efficiency becomes even more critical due to limited financial, human, and infrastructural resources. This study aims to analyze the product distribution efficiency of UMKM Kerupuk Jaya Pesona, located in Cinanggung Village, Serang Regency, Banten Province, by applying two classical transportation methods: the North West Corner (NWC) and Least Cost (LC) methods. Both methods were used to determine the allocation pattern that minimizes total transportation cost across three destination regions: Serang, Cilegon, and Pandeglang. The data include three couriers (as supply sources) and three market destinations (as demands), totaling 18,000 product units per distribution cycle. The results show that both NWC and LC methods yield the same total transportation cost of Rp 358,000,000, although their allocation patterns differ. This indicates that the supply–demand and cost structure of the UMKM’s logistics system is balanced. This research concludes that simple optimization methods such as NWC and LC can serve as practical decision-support tools for MSMEs without requiring complex computational models. The study also recommends the application of the Modified Distribution (MODI) method to verify the optimality of the solution and highlights the importance of logistics efficiency in strengthening MSME competitiveness in the digital era.

ABSTRACKThe purpouse of this study was to determine whether there is a correlation between religious independence and the character building based on Pancasila at the tenth grade students of SMA Negeri Colomadu in 2019/2020 Academic year. This research was a quantitative research. In this study, the population was 298 students in class X SMA Negeri Colomadu. The sampling technique used was proportional rondom sampling technique. The documentation technique was used to collect data on students at SMA Negeri Colomadu. The questionnaire technique was used to collect data on religious independence and character formation based on Pancasila. The data analysis technique used the productmoment correlation technique. The annalysis results showed thah the value of = 0,742 > r = 0,312 at the 5% significance level. Thus the hypothesis which stated that “There is a positive correlation between religious independence and character formation based on Pancasila at the tenth grade students of SMA Negeri Colomadu in 2019/2020 academic year” was proven true.

Digital Business is experiencing rapid growth, including in the online-based food business. The Internet is creating a new face in interactive communication between sellers, consumers and business partners. This allows the company to be able to interact and work together continuously to be able to develop products, marketing, delivery and maximum service to get customer satisfaction. One type of business that is currently growing rapidly and is very popular with customers is food delivery services including go food, grab food and shopee food. This delivery service will increasingly compete according to the response from customers, influenced by the quality of service. The purpose of this study was to find out how service quality affects customer satisfaction, especially in online- based food delivery applications. The research used in this research is quantitative analysis method. The method used is to collect information obtained from questionnaires. Variable indicators were tested for validity and reliability. In testing this validity using the Pearson Correlation approach. The reliability test in this study used Cronbach, Alpha coefficient. The results of the study explain that the service variable partially has a positive effect on customer satisfaction. The influence of service quality provided by service providers and service partners is very well responded by application users.

Information technology concerning the use of computers in a government service is needed to facilitate a job in an agency. One of them is in the Community Empowerment and Village Government Agency, Central Aceh Regency, where data management for poor households is still using the manual method, the data that is processed can be lost, damaged or infected by a virus, besides that the data is also not managed properly. good and when data is needed, the data will be difficult to find due to the large number of files piling up. With a decision support system using the web, it is hoped that it can help ease the burden on employees who manage recipients of aid for poor families which will be implemented at the BPMPK Office, Central Aceh Regency.

The textile and textile products (TPT) industry in Indonesia still has a lot of problems, one of which is the problem of raw materials which are considered to be unable to compete with the same material from importation sources. This requires the company continue to strive to increase productivity and cost efficiency to mitigate the increase in prices of raw materials charged to consumers. One effort that can be done by the company is to improve the efficiency of the cost of raw material inventory. The company must be able to plan and control the company's raw material inventory to support the effectiveness of its raw material costs. By having good planning and control, the company will avoid the problem of excess and lack of raw material inventory in carrying out production activities. This study aims to determine the application of the Justintime system at PT Bintang Baru Sentosa in increasing the efficiency of the company's raw material inventory costs. The type of research is quantitative qualitative research with a case study approach. Data sources obtained from primary data and secondary data. The methods used in this study include: interviews, observation, and documentation studies.The results of the study show that using Justintime in controlling raw material inventories has cost efficiencies of Rp18.418.185,- for 75/72 F DTY and 150/48 F DTY with a cost efficiency level of 75%.  Keyword:Raw Materials, Inventories, Just.intime (JIT), Cost Efficiency

Ngijo Village, one of the villages in Tasikmadu Subdistrict, Karanganyar Regency, was affected by Covid-19. Since the outbreak of Covid-19, the people's income has been reduced and even lost their livelihoods due to the production activities of the industries where they work stopped. Another factor is that the public does not fully understand Covid-19 and its prevention protocol. The Community Retrieval Activity was carried out as a form of social care at the STIE Atma Bhakti University in Surakarta through Social Service activities and outreach on prevention efforts for Covid-19. The implementation method using the counseling method and the provision of basic food packages. The implementation of the Community Retrieval Activity received a positive response from residents of Ngijo Village. Social assistance in the form of basic necessities can help alleviate the economic burden of the community, while extension activities can increase the understanding of Ngjio Village residents about Corona Virus (Covid-19), as well as prevention efforts. Keywords: social service, covid-19 prevention, ngijo village

The application of technology in public services has become an indispensable obligation, even for the Village Government of Tidu in Pohjentrek Subdistrict, Pasuruan Regency. Manual approaches in public services are vulnerable to serious problems, such as the risk of losing important documents and the lack of structured recording of documents issued by the Village Government of Tidu. In response to this challenge, a community service effort was undertaken to support the Government and the community of Tidu Village in utilizing the Tidu Village Information Website. The mentoring and training sessions conducted successfully demonstrated that the implementation of the service system by the Village Government of Tidu is much more productive, with time savings and a transition from manual data management to digital format through the village information system.

This research report is motivated by the large number of sharia financial institutions that have emerged and the increasing number of sharia banks that provide financial services while meeting the increasingly diverse needs of society. With the current abundance of sharia banking, there are accusations that sharia banking is a conventional bank that only has a sharia label attached to it. However, nowadays sharia banks always try to implement Islamic values based on Sharia principles. Sharia banking has a big influence on people's economic activities. Various sharia banking products are expected to be able to encourage and accelerate people's economic progress in accordance with Islamic principles. In Islamic principles, economic activity cannot be separated from the postulate of faith in Allah SWT and even becomes a built in control for economic actors. From here, sharia banking was built and designed to improve the standard of human life. Sharia banking is expected to become an alternative and even a decisive solution for the development of the national economy, especially for Muslims.

Asthma Bronchiale is inflammation in the airways (bronchi) where excessive lung mucus production makes breathing difficult. One treatment that can be given is by giving nebulizer therapy to ease the cough response to the presence of mucus in the respiratory tract with the addition of mint oil. The purpose of the case study is to illustrate the effect of adding mint (pappermint oil) and liquid with a nebulizer on the handling of asthma bronchiale cough in Ungaran District Hospital. The subject of this case study used two patients with asthma bronchiale, willing to be investigated, cooperative and more than 5 years old. Data was collected by observation and administration of nebulizer therapy by adding pappermint oil and liquid using a nebulizer. The results of the case study found that subject I had a cough frequency of 25 (moderate), no inflammation, no wheezing and easy sputum discharge, whereas in subject II the frequency of cough became 24 (moderate), no inflammation, no wheezing, and easy phlegm Exit. This study is recommended to apply pappermint oil therapy to reduce the frequency of cough bronchial asthma patients

The downturn in the economy due to the Covid-19 pandemic has made it difficult for people to meet their daily needs. Therefore, as a non-structural institution, BAZNAS Bali Province is always required to provide optimal services to mustahik in particular. This research focuses on examining: (1) How to collect BAZNAS in serving Muzakki during the Covid-19 pandemic at BAZNAS, Bali Province. (2) How was the distribution of BAZNAS in serving Mustahik during the Covid-19 pandemic at BAZNAS, Bali Province. (3) How to Empower BAZNAS in Serving Mustahics during the Covid-19 Pandemic at BAZNAS, Bali Province. The objectives of this study are (1) to determine the collection of BANAS in serving Muzakki during the Covid-19 pandemic at BAZNAS, Bali Province. (2) To find out the distribution of BAZNAS in serving Mustahik during the Covid-19 pandemic at BAZNAS, Bali Province. (3) Knowing the Empowerment of BAZNAS in Serving Mustahics during the Covid-19 Pandemic at BAZNAS, Bali Province. This type of research is descriptive qualitative. Informants were selected using purposive sampling technique. Techniques to obtain valid and accurate data, namely; interviews, observation, and documentation. Data validity includes; power of observation and triangulation. Data analysis techniques include; data reduction, data presentation and decision making.The results showed that (1) the collection of BAZNAS in serving Mustahik during the Covid-19 pandemic includes; (a) education (by involving donors during distribution), (b) promotion (through print media, social media, and electronic media), accountability (through audits by public accountants, and syar'i audits), (2) distribution carried out by BAZNAS Bali Province, namely (a) traditional consumptive distribution, (b) creative consumptive distribution, (c) traditional productive distribution, and (d) creative productive distribution. (3) Empowerment carried out by BAZNAS Bali Province, namely (a) developing, (empowering mustahik), (b) self-empowering, (protecting, defending, and looking after the weak through Universal Service).

ABSTRAKPerilaku seseorang dalam memutuskan untuk memilih produk dalam pembiayaan multijasa di setiap lembaga keuangan pasti dipengaruhi oleh rasionalitas ekonomi yakni bagi hasil, fasilitas, pelayanan, kemudahan, kenyamanan dan keamanan transaksi. Karena sebagai indentitas dan juga sebagai langkah untuk menarik nasabah yang pada pencapaiannya yaiu kepercayaan nasabah. Rumusan masalah penelitian ini adalah (1) Apakah proses pemberian pembiayaan dapat berpengaruh terhadap kepercayaan nasabah pembiayaan multijasa pada PT. Bank Pembiayaan Rakyat Syariah Fajar Sejahtera Bali? (2) Apakah preferensi dapat berpengaruh terhadap kepercayaan nasabah pembiayaan multijasa? (3) Apakah proses pemberian pembiayaan dan preferensi dapat berpengaruhterhadap kepercayaan nasabah pembiayaan multijasa? Tujuan penelitian ini adalah untuk mengetahui (1) pengaruh proses pemberian pembiayaan terhadap kepercayaan nasabah pembiayaan multijasa (2) pengaruh preferensi terhadap kepercayaan nasabah pembiayaan multijasa (3) pengaruh proses pemberian pembiayaan dan preferensi terhadap kepercayaan nasabah pembiayaan multijasa. Metode penelitian ini adalah pendekatan kuantitatif deskriptifdengan sumber data yang digunakan berupa data primer dan sekunder. Populasi penelitian yaitu, nasabah pembiayaan multijasa PT. Bank Pembiayaan Rakyat Syariah (BPRS) Fajar Sejahtera Bali dengan teknik pengumpulan data melalui angket/kuesioner dan dokumentasi. Teknik analisis data yang digunakan adalah ujiregresi linier berganda, uji parsial, uji simultan dan uji determinan dengan menggunakan SPSS (Statistical Package For Social Seince) versi 24. Berdasarkan hasil perhitungan uji regresi linier berganda dengan persamaan Y = 5,719 + 0.134X1 + 0,634X2 + e hasil koefisien korelasi secara terpisah diperoleh X1 5C sebesar 0,134 dengan nilai signifikan 0,037 < 0,05 sedangkan variabel X2 preferensi sebesar 0,634 dengan nilai signifikan 0,000 < 0,05 dengan secara simultan 30,761 dengan signifikan 0,00 besarnya nilai koefisien determinasi tersebut menunjukan adanya pengaruh antara 5C dan preferensi terhadap kepercayaan nasabah pembiayaan multijasa di PT. Bank Pembiayaan Rakyat Syariah (BPRS) Fajar Sejahtera Bali baik secara parsial atau terpisah maupun secara simultan.   ABSTRACTA person's behavior in deciding to choose a product for multi-service financing at any financial institution is definitely influenced by economic rationality, namely profit sharing, facilities, services, convenience, convenience and security of transactions. Because as an identity and also as a step to attract customers whose achievements are customer trust. The formulation of the research problems are (1) whether the process of providing financing can affect the trust of multi-service financing customers in PT. Fajar Sejahtera Bali Sharia People's Financing Bank? (2) Can preferences affect customer trust in multi-service financing? (3) Can the process of providing financing and preferences affect customer trust in multi-service financing? The purpose of this study was to determine (1) theeffect of the process of providing financing on customer trust in multi-service financing (2) the effect of preference on customer trust in multi-service financing (3) the effect of the process of providing financing and preferences on customer trust in multi-service financing. This research method is a descriptive quantitative approach with data sources used in the form of primary and secondary data. The study population, namely, multi-service financing customers of PT. Sharia People's Financing Bank (BPRS) Fajar Sejahtera Bali with data collection techniques through questionnaires / questionnaires and documentation. The data analysis technique used is multiple linear regression test, partial test, simultaneous test and determinant test using SPSS (Statistical Package for SocialSeince) version 24. Based on the results of the calculation of multiple linear regression with the equation Y = 5.719 + 0.134X1 + 0.634X2 + e, the results of the correlation coefficient are separately obtained by X1 5C of 0.134 with a significant value of 0.037 <0.05 while the variable X2 preference is 0.634 with a significant value of 0.000 <0 , 05 with 30.761 simultaneously with a significant 0.00 of the value of the coefficient of determination shows the influence between 5C and preferences on customer trust in multi-service financing in PT. Sharia People's Financing Bank (BPRS) Fajar Sejahtera Bali either partially or separately or simultaneously.

Dalam pengelolaan zakat profesi mulai dari perencanaan, pengorganisasian, pelaksanaan, dan pengawasan terutama dalam menghimpun dan menyalurkan zakat profesi tentu yang menjadi tujuan utama adalah terciptanya pemerataan dan kemaslahatan umat. Meningkatkan kepuasan serta komitmen muzakki dapat mempertahankan kepercayaan dan loyalitas muzakki berzakat sehingga terciptanya kesadaran untuk senantiasa menyisihkan sebagian harta untuk memberdayakan golongan tidak mampu. Tujuan penelitian adalah untuk mengetahui: 1) Pengelolaan zakat profesi dalam meningkatkan loyalitas muzakki di Baznas Kota Denpasar. 2) Tingkat loyalitas muzakki di Baznas kota Denpasar. Metode penelitian ini menggunakan metode deskriptif dengan pendekatan kualitatif. Informan terdiri dari 12 orang yang dipilih dengan menggunakan teknik purposive. Pengumpulan data yang diperoleh berdasarkan fakta dan data melalui observasi, wawancara, dan dokumentasi. Teknik analisisis data meliputi reduksi data, penyajian data, dan penarikan kesimpulan. Hasil penelitian yang diperoleh: (1) Analisis pengelolaan zakat profesi Baznas Kota Denpasar dalam hal ini menggunakan langkah-langkah yaitu perencanaan, berkaitan dalam menetapkan, merumuskan, mengidentifikasi, dan mengembangkan. Pengorganisasian, dalam hal ini menggunakan persepsi dan sikap yang diharapkan dapat memaksimalkan tujuan pengelolaan. Pelaksanaan, berkaitan dengan kinerja pengelola zakat yang selama ini menggunakan Standar Operasional Prosedur (SOP). Pengawasan, berkaitan dengan kondisi pengelolaan zakat profesi yang masih stabil. (2) Tingkat loyalitas muzakki ditinjau dari kepuasan, komitmen, serta kesukaan produk muzakki dapat dinilai dari besarnya pernyataan rasa puas dan bentuk kepedulian muzakki terhadap sesama dalam berzakat di Baznas Kota Denpasar   ABSTRACTIn the management of professional zakat starting from planning, organizing, implementing, and supervising, especially in collecting and distributing professional zakat, of course the main goal is the creation of equality and the benefit of the people. Increasing the satisfaction and commitment of muzakki can maintain the trust and loyalty of muzakki to tithe so as to create awareness to always set aside some of the assets to empower the poor. The research objectives were to determine: 1) Management of professional zakat in increasing muzakki loyalty at Baznas Denpasar City. 2) The level of muzakki loyalty at Baznas Denpasar city. This research method uses a descriptive method with a qualitative approach. The informants consisted of 12 people who were selected using a purposive technique. Collecting data obtained based on facts and data through observation, interviews, and documentation. Data analysis techniques include data reduction, data presentation, and drawing conclusions. The research results obtained: (1) Analysis of the professional zakat management of Baznas Denpasar City in this case uses the steps, namely planning, related to determining, formulating, identifying, and developing. Organizing, in this case using perceptions and attitudes which are expected to maximize management objectives. Implementation, related to the performance of zakat managers who have been using Standard Operating Procedures (SOP). Supervision, related to the condition of professional zakat management which is still stable. (2) The level of muzakki loyalty in terms of satisfaction, commitment, and liking of muzakki products can be assessed from the magnitude of the statement of satisfaction and the form of muzakki's concern for others in tithing at Baznas Denpasar City.

The Digital Report Card (ARD) application is a web-based application system that is expected to be able to change the work pattern of teachers from manual patterns to digital patterns and is expected to make it easier for teachers to make assessments of students even to print report cards and evaluate the value of student learning outcomes. The objectives of this study are; (1) To find out that there is a relationship between the use of the Digital Report Card Application and the performance of Public SD teachers in Tuban Village, Badung 2019-2020; (2) to find out how much the relationship between the Digital Report Card Application and the performance of Public Elementary School teachers in Kelurahan Tuban, Badung 2019-2020. This research is correlational quantitative which is used with saturated sample method with 46 samples. Data collection techniques used as premiere data, observation and documentation as secondar data is to use questionnaires the data is analyzed with the product moment formula. The results showed that it is known that r count 0.293 is greater than r table 0.291. So that there is a relationship between the use of the digital report card application on teacher performance. If interpreted in the table the value of r, the relationship is low or weak. 2) the digital report card application variable (X) has a contribution of 8.6% to the teacher performance variable (Y) and the rest is 91.4% influenced by other factors not examined in this study.

Developing of prototype now are became easier with the existence  of 3 d printer, now is common known as rapid prototyping method. There are many different method on 3d printing depend on material used for printing. The wide range of material that can be print using 3d printer such as metal to plastic even ceramic. The rapid prototyping using 3d printer have various advantage compare to traditional prototyping. The development of 3d printing makes it not only for prototyping but can be a small batch manufacture, where economic scale of production cannot be reach with traditional production. The fast development of computer and internet technology have big impact on the 3d printer development, before the development of reprap 3d printing was only knew by industrialist and manufacturer. After reprap born, 3d printer is became more common to personal user. People can have their 3d printer at home. People can design their own product using CAD software and send it to 3d printer, or send it via internet to print by 3d printing company. Even there ara lot of advantages of 3D printer development , there is some disadvantages of 3d printer, especially on regulation.          

The management of production and operations in factory machinery is an optimal management effort in the use of resources consisting of labor, machinery, equipment and raw materials. The production and operations manager directs various inputs in order to produce various outputs or results in units of quantity, quality, price, specific time and location according to consumer demand. Efficiency and effectiveness of the production process to be achieved requires proper scheduling management so that the production output produced can be completed according to target. Management of production and customer orders is still simple, besides that the status of raw material inventories that cannot be directly known can often result in delays in the production process and even production cannot be done as soon as possible. Scheduling orders that enter using the system first in first out where the first order that comes is done, but has not considered the number of orders, priority of customers, maturity of workmanship and engine capacity so that the estimated completion of the order can not be known. To make it more efficient and directed, the Earliest Due Date method is used by sorting the production work based on the closest due date. This method can be used for scheduling on one machine or for scheduling on several machines (parallel machine) so that the scheduling management information system can manage effective production scheduling and produce production reports automatically as needed.

The World Health Organization (WHO) recommendation that mothers breastfeed for a minimum of 6 months has not been achieved, this is because the psychological condition of mothers after giving birth often experiences disturbances, which will affect breast milk production. This problem can occur due to the transition period to becoming a parent, the anxiety felt during post partum can be one of the factors influencing breast milk production. The aim of this service is to This service activity is carried out with the aim of providing information about psychological adaptation in breastfeeding mothers and how to carry out this psychological adaptation to achieve optimization of the role as a mother at the Jongaya Community Health Center. The number of participants in this service activity was 15 people which was held on July 28 2023 at the Jongaya Community Health Center using the lecture and question and answer method as well as the sharing method. The results of this activity show changes in behavior in the form of successful adaptation, especially in psychological changes during breastfeeding.  

In the first quarter of 2017, retail in Indonesia recorded a growth of 2.5%, while in 2018 the growth was only in the range of 1% -1.5%. The cause of the slow growth is the change in the consumption pattern of the people and it will continue at the beginning of 2018. In addition, the decreasing productivity of the community at the lower middle level. As a retailer, Anterah store also faces the same thing, so anticipating a decline in sales requires an analysis of the best-selling products and how to find out the relationship between the products purchased by consumers. The association relationship between these products will be used as the basis for product arrangement, so that the frequency of products that consumers often buy can be arranged closely together so that consumers do not have to look for them longer. Market basket analysis to determine the relationship between products sold simultaneously is used to explore association rules (Association Rule Mining) which will produce products that are purchased simultaneously as a consideration for product arrangement in Anterah Retail storefront. Meanwhile, the best-selling products will be explored using the Frequent Pattern Growth method in order to obtain a ranking list of the most purchased products by consumers. This analysis is used as a basis for considering product promotion. The test results on the sales sample data obtained an average value of minimum support = 0.0025, minimum confidence = 0.610, LaPlace = 0.9985, Gain = -0.006, p-s = 0.003, Lift = 103.82, Convicting 2.5285 with a processing time of 41.456 seconds.